From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PULL REQUEST] u-boot-atmel/master
Date: Fri, 05 Aug 2011 08:40:03 +0200 [thread overview]
Message-ID: <4E3B9043.1060908@aribaud.net> (raw)
In-Reply-To: <1312504641-12037-1-git-send-email-u-boot@emk-elektronik.de>
Hi Reinhard,
Le 05/08/2011 02:37, Reinhard Meyer a ?crit :
> Dear Albert,
>
> more boards are fixed. I doubt I will get fixes for at91cap9adk.
>
> MAKEALL at91:
>
> --------------------- SUMMARY ----------------------------
> Boards compiled: 55
> Boards with warnings or errors: 1 ( at91cap9adk )
> ----------------------------------------------------------
>
>
> Best Regards,
> Reinhard
>
> ---
>
>
> The following changes since commit 7a619ab30a0db64c22fb053702c41a94f05cf648:
>
> arm: auto gen asm-offsets.h for mb86r0x (2011-08-04 13:56:55 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-atmel.git master
>
> Asen Dimov (3):
> pm9261: compiles with the AT91 reworked scheme
> make pm9263 buildable for v2011.06 release
> make pm9g45 buildable for v2011.06 release
>
> Matthias Fuchs (1):
> at91: reworked support for meesc board
>
> Reinhard Meyer (1):
> AT91: fix at91sam9g45.h to include USB Host defines
>
> Thomas Petazzoni (4):
> sbc35_a9g20: update board to the new AT91 organization
> tny_a9260/tny_a9g20: update board to the new AT91 organization
> atmel: update at91sam9m10g45 SoC support to new style
> atmel: Update support of board AT91SAM9M10G45-EK to new style
>
> MAKEALL | 8 +-
> Makefile | 46 -----
> .../cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 114 ++++++------
> arch/arm/include/asm/arch-at91/at91sam9g45.h | 16 ++-
> .../arm/include/asm/arch-at91/at91sam9g45_matrix.h | 194 +++++++------------
> board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 115 ++++++-----
> board/atmel/at91sam9m10g45ek/led.c | 6 +-
> board/calao/sbc35_a9g20/sbc35_a9g20.c | 88 +++++----
> board/calao/tny_a9260/tny_a9260.c | 55 +++---
> board/esd/meesc/config.mk | 1 -
> board/esd/meesc/meesc.c | 49 +++---
> board/ronetix/pm9261/led.c | 9 +-
> board/ronetix/pm9261/pm9261.c | 38 ++--
> board/ronetix/pm9263/led.c | 9 +-
> board/ronetix/pm9263/pm9263.c | 42 ++--
> board/ronetix/pm9g45/pm9g45.c | 32 ++--
> boards.cfg | 12 +-
> include/configs/at91sam9m10g45ek.h | 193 +++++++++----------
> include/configs/meesc.h | 202 ++++++++++++--------
> include/configs/pm9261.h | 18 +-
> include/configs/pm9263.h | 17 +-
> include/configs/pm9g45.h | 16 +-
> include/configs/sbc35_a9g20.h | 87 ++++-----
> include/configs/tny_a9260.h | 85 ++++----
> 24 files changed, 694 insertions(+), 758 deletions(-)
> delete mode 100644 board/esd/meesc/config.mk
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
next prev parent reply other threads:[~2011-08-05 6:40 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-05 0:37 [U-Boot] [PULL REQUEST] u-boot-atmel/master Reinhard Meyer
2011-08-05 6:40 ` Albert ARIBAUD [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-08-03 10:45 Reinhard Meyer
2011-08-03 10:53 ` Reinhard Meyer
2011-08-03 11:05 ` Albert ARIBAUD
2011-08-03 13:15 ` Albert ARIBAUD
2011-08-03 13:35 ` Reinhard Meyer
2011-08-03 14:45 ` Albert ARIBAUD
2011-06-30 9:06 [U-Boot] [PULL request] u-boot-atmel/master Reinhard Meyer
2011-06-30 10:55 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E3B9043.1060908@aribaud.net \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox