From: Aneesh V <aneesh@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V8 3/9] omap-common: add nand spl support
Date: Fri, 05 Aug 2011 13:00:52 +0530 [thread overview]
Message-ID: <4E3B9C2C.2040806@ti.com> (raw)
In-Reply-To: <1312300757-9039-4-git-send-email-simonschwarzcor@gmail.com>
Hi Simon,
Sorry if my response is late. I was not in office for couple of days.
On Tuesday 02 August 2011 09:29 PM, Simon Schwarz wrote:
> Add NAND support for the new SPL structure.
>
> Signed-off-by: Simon Schwarz<simonschwarzcor@gmail.com>
> ---
> This patch didn't exist before V2!
>
> V2 changes:
> ADD Some define-barriers for OMAP3 to only use NAND
> ADD nand_load_image() - inits the OMAP gpmc, loads the images - parses the
> header
> CHG cosmetic
> ADD do_reset() implementation for omap-common spl
> ADD nand_copy_image to nand.h
> ADD CPP barriers for mmc and nand support. The parts depending on library
> support are only compiled if the respective library is included.
>
> V3 changes:
> ADD Comment why setup_clocks_for_console() isn't called for OMAP3
> CHG cosmetic (deleted empty line)
> CHG rename of NAND_MODE_HW to NAND_MODE_HW_ECC
> DEL NAND_MODE_SW. Not used.
>
> V4 changes:
> CHG cosmetic - style problems
>
> V5 changes:
> CHG renamed nand_copy_image to nand_spl_load_image
> CHG offs paramter of nand_spl_load_image is of type loff_t now
>
> V6 changes:
> ADD call to nand_deselect after loading the images
> ADD nand_deselect to nand.h
>
> V7 changes:
> DEL some CONFIG_SPL_* relying on garbage collection now
> ADD mmc_load_image and nand_load_image now have __attribute__((unused)) to
> prevent warnings when the lib is not added to SPL
> DEL do_reset() isn't used anymore
> CHG header based loading in SPL
>
> V8 changes:
> DEL nand_spl_read_page is replaced by nand_spl_load_image with size=page size
>
> Transition from V1 to V2 also includes that this patch is now based on
> - the new SPL layout by Aneesh V and Daniel Schwierzeck
> - the OMAP4 SPL patches by Aneesh V
> ---
> arch/arm/cpu/armv7/omap-common/spl.c | 46 +++++++++++++++++++++++++++++++++-
> arch/arm/include/asm/omap_common.h | 1 +
> include/nand.h | 3 ++
> 3 files changed, 49 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
> index 1d301f4..53d10bf 100644
> --- a/arch/arm/cpu/armv7/omap-common/spl.c
> +++ b/arch/arm/cpu/armv7/omap-common/spl.c
> @@ -26,6 +26,7 @@
> #include<asm/u-boot.h>
> #include<asm/utils.h>
> #include<asm/arch/sys_proto.h>
> +#include<nand.h>
> #include<mmc.h>
> #include<fat.h>
> #include<timestamp_autogenerated.h>
> @@ -173,7 +174,7 @@ end:
> hang();
> }
> }
> -
> +static void mmc_load_image(void) __attribute__((unused));
> static void mmc_load_image(void)
> {
> struct mmc *mmc;
> @@ -207,12 +208,48 @@ static void mmc_load_image(void)
> }
> }
>
> +#ifdef CONFIG_SPL_NAND_SUPPORT
> +static void nand_load_image(void) __attribute__ ((unused));
> +static void nand_load_image(void)
> +{
> + struct image_header *header;
> +
> + gpmc_init();
> + nand_init();
> +
> + /*use CONFIG_SYS_TEXT_BASE as temporary storage area */
> + header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
> +
> +#ifdef CONFIG_NAND_ENV_DST
> + nand_spl_load_image(CONFIG_ENV_OFFSET,
> + CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
> + parse_image_header(header);
> + nand_spl_load_image(CONFIG_ENV_OFFSET, image_size,
> + (void *)image_load_addr);
> +#ifdef CONFIG_ENV_OFFSET_REDUND
> + nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND,
> + CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
> + parse_image_header(header);
> + nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, image_size,
> + (void *)image_load_addr);
> +#endif
> +#endif
Can you please explain the logic here. What are you loading here?
br,
Aneesh
next prev parent reply other threads:[~2011-08-05 7:30 UTC|newest]
Thread overview: 134+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-28 14:14 [U-Boot] [0/5]devkit8000 nand_spl support simonschwarzcor at googlemail.com
2011-06-28 14:14 ` [U-Boot] [1/5]devkit8000 nand_spl: armv7 support nand_spl boot simonschwarzcor at googlemail.com
2011-06-29 8:27 ` Andreas Bießmann
2011-06-30 11:10 ` Aneesh V
2011-06-28 14:14 ` [U-Boot] [2/5]devkit8000 nand_spl: omap3 " simonschwarzcor at googlemail.com
2011-06-29 8:43 ` Andreas Bießmann
2011-06-30 9:06 ` Simon Schwarz
2011-06-30 10:38 ` Aneesh V
2011-06-28 14:14 ` [U-Boot] [3/5]devkit8000 nand_spl: Add RAM configuration independent of x-loader or CH simonschwarzcor at googlemail.com
2011-06-28 14:14 ` [U-Boot] [4/5]devkit8000 nand_spl: Add SPL NAND support to omap_gpmc driver simonschwarzcor at googlemail.com
2011-06-29 8:58 ` Andreas Bießmann
2011-06-30 11:01 ` Simon Schwarz
2011-06-28 14:14 ` [U-Boot] [5/5]devkit8000 nand_spl: add nand_spl support simonschwarzcor at googlemail.com
2011-06-28 15:01 ` Andreas Bießmann
2011-07-25 18:05 ` [U-Boot] [PATCH V2 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-25 18:05 ` [U-Boot] [PATCH V2 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-25 18:05 ` [U-Boot] [PATCH V2 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-26 6:07 ` Andreas Bießmann
2011-07-26 8:42 ` Simon Schwarz
2011-07-28 6:20 ` Aneesh V
2011-07-25 18:05 ` [U-Boot] [PATCH V2 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-26 5:59 ` Andreas Bießmann
2011-07-26 8:47 ` Simon Schwarz
2011-07-25 18:05 ` [U-Boot] [PATCH V2 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-26 6:11 ` Andreas Bießmann
2011-07-25 18:05 ` [U-Boot] [PATCH V2 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-26 6:17 ` Andreas Bießmann
2011-07-26 9:09 ` Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-26 10:42 ` Andreas Bießmann
2011-07-26 12:34 ` Simon Schwarz
2011-07-26 11:04 ` Wolfgang Denk
2011-07-26 11:06 ` [U-Boot] [PATCH V3 0/5] OMAP3 and devkit8000 SPL support Wolfgang Denk
2011-07-26 12:31 ` Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 " Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-26 18:06 ` Scott Wood
[not found] ` <4E2FCF6E.10701@gmail.com>
[not found] ` <20110727163839.736d5bed@schlenkerla.am.freescale.net>
2011-07-28 7:51 ` Simon Schwarz
2011-07-28 18:56 ` Scott Wood
2011-07-29 8:48 ` Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-26 18:04 ` Scott Wood
2011-07-26 18:12 ` Scott Wood
2011-07-27 9:22 ` Simon Schwarz
2011-07-27 14:55 ` V, Aneesh
2011-07-27 22:01 ` Scott Wood
2011-07-28 7:27 ` Aneesh V
2011-07-26 12:09 ` [U-Boot] [PATCH V4 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-28 8:50 ` Aneesh V
2011-07-28 9:42 ` Simon Schwarz
2011-07-29 16:53 ` Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-28 9:42 ` Aneesh V
2011-07-28 12:44 ` Simon Schwarz
2011-07-28 14:24 ` Aneesh V
2011-07-28 14:34 ` Simon Schwarz
2011-08-02 12:03 ` Simon Schwarz
2011-08-02 12:18 ` Aneesh V
2011-08-02 12:30 ` Simon Schwarz
2011-07-28 9:58 ` Aneesh V
2011-07-28 12:54 ` Simon Schwarz
2011-07-28 14:16 ` Aneesh V
2011-07-28 18:50 ` Scott Wood
2011-07-28 19:07 ` Wolfgang Denk
2011-07-29 7:34 ` Aneesh V
2011-07-29 8:19 ` Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-28 11:54 ` Aneesh V
2011-07-28 14:04 ` Simon Schwarz
2011-07-28 16:18 ` Aneesh V
2011-07-29 12:17 ` Simon Schwarz
2011-07-28 19:16 ` Scott Wood
2011-07-29 9:12 ` Simon Schwarz
2011-07-29 9:27 ` Wolfgang Denk
2011-07-29 12:27 ` Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-28 10:51 ` Aneesh V
2011-07-28 11:54 ` Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 0/7] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 1/7] omap-common/omap4: relocate early UART clock setup Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 2/7] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 3/7] omap-common: add nand spl support Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 4/7] spl: add NAND Library to new SPL Simon Schwarz
2011-08-01 17:58 ` Scott Wood
2011-08-02 8:15 ` Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 5/7] spl: Add POWER library to new spl Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 6/7] omap3: new SPL structure support Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 7/7] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-08-01 16:23 ` [U-Boot] [PATCH V7 0/7] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 0/9] " Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 1/9] omap-common/omap4: relocate early UART clock setup Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 2/9] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 3/9] omap-common: add nand spl support Simon Schwarz
2011-08-05 7:30 ` Aneesh V [this message]
2011-08-08 7:50 ` Simon Schwarz
2011-08-08 9:04 ` Aneesh V
2011-08-02 15:59 ` [U-Boot] [PATCH V8 4/9] spl: add NAND Library to new SPL Simon Schwarz
2011-08-02 16:12 ` Scott Wood
2011-08-02 15:59 ` [U-Boot] [PATCH V8 5/9] spl: Add POWER library to new spl Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 6/9] omap3: new SPL structure support Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 7/9] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 8/9] omap3: implement boot parameter saving Simon Schwarz
2011-08-05 7:41 ` Aneesh V
2011-08-08 8:03 ` Simon Schwarz
2011-08-08 8:44 ` Aneesh V
2011-08-08 10:59 ` Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 9/9] omap-common: reorganize spl.c Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 0/9] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 1/9] omap-common/omap4: relocate early UART clock setup Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 2/9] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 3/9] omap-common: add nand spl support Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 4/9] spl: add NAND Library to new SPL Simon Schwarz
2011-08-08 23:34 ` Scott Wood
2011-08-08 13:11 ` [U-Boot] [PATCH V9 5/9] spl: Add POWER library to new spl Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 6/9] omap3: new SPL structure support Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 7/9] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 8/9] omap3: implement boot parameter saving Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 9/9] omap-common: reorganize spl.c Simon Schwarz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E3B9C2C.2040806@ti.com \
--to=aneesh@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox