public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Simon Schwarz <simonschwarzcor@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V8 8/9] omap3: implement boot parameter saving
Date: Mon, 08 Aug 2011 12:59:30 +0200	[thread overview]
Message-ID: <4E3FC192.20209@gmail.com> (raw)
In-Reply-To: <4E3FA1ED.8090201@ti.com>

On 08/08/2011 10:44 AM, Aneesh V wrote:
> Hi Simon,
>
> On Monday 08 August 2011 01:33 PM, Simon Schwarz wrote:
>> Hi Aneesh,
>>
>> On 08/05/2011 09:41 AM, Aneesh V wrote:
>>> Hi Simon,
>>>
>>> On Tuesday 02 August 2011 09:29 PM, Simon Schwarz wrote:
>>>> Implements the saving of boot params passed by OMAP3 ROM code.
>>>>
>>>> Signed-off-by: Simon Schwarz<simonschwarzcor@gmail.com>
>>>> ---
>>>> Didn't exist before V8
>>>> ---
>>>> arch/arm/cpu/armv7/omap-common/spl.c | 6 +++++-
>>>> arch/arm/cpu/armv7/omap3/lowlevel_init.S | 9 +++++++--
>>>> arch/arm/include/asm/omap_common.h | 10 ++++++++++
>>>> 3 files changed, 22 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/arch/arm/cpu/armv7/omap-common/spl.c
>>>> b/arch/arm/cpu/armv7/omap-common/spl.c
>>>> index 53d10bf..3dd8e0d 100644
>>>> --- a/arch/arm/cpu/armv7/omap-common/spl.c
>>>> +++ b/arch/arm/cpu/armv7/omap-common/spl.c
>>>> @@ -194,8 +194,12 @@ static void mmc_load_image(void)
>>>> printf("spl: mmc init failed: err - %d\n", err);
>>>> hang();
>>>> }
>>>> -
>>>> +/* For OMAP3 there is no automatic boot mode detection */
>>>> +#ifdef CONFIG_OMAP34XX
>>>> + boot_mode = CONFIG_SYS_MMC_SD_BOOTMODE;
>>>> +#else
>>>> boot_mode = omap_boot_mode();
>>>> +#endif
>>>
>>> Why boot mode detection is not supported? You seem to be saving
>>> bootparams below that has boot mode information. Why don't you use it?
>>>
>>
>> Because you wrote: "What I have done for OMAP4 will not work for OMAP3.
>> For OMAP3 you will
>> get only the boot-device(eMMC, MMC/SD, nand etc) and *not* the
>> bootmode(raw
>> vs FAT)."
>> http://mid.gmane.org/4E256783.5080601 at ti.com
>>
>> Did I understand you wrong here?
>
> Sorry for the noise. I mistook 'boot_mode' for 'boot_device'. Anyway,
> instead of hard-coding this, I would prefer the following approach
> taken by x-loader.
>
> 1. For eMMC - raw mode
> 2. For external MMC/SD card - FAT mode.

done.

> best regards,
> Aneesh

Regards
Simon

  reply	other threads:[~2011-08-08 10:59 UTC|newest]

Thread overview: 134+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-28 14:14 [U-Boot] [0/5]devkit8000 nand_spl support simonschwarzcor at googlemail.com
2011-06-28 14:14 ` [U-Boot] [1/5]devkit8000 nand_spl: armv7 support nand_spl boot simonschwarzcor at googlemail.com
2011-06-29  8:27   ` Andreas Bießmann
2011-06-30 11:10     ` Aneesh V
2011-06-28 14:14 ` [U-Boot] [2/5]devkit8000 nand_spl: omap3 " simonschwarzcor at googlemail.com
2011-06-29  8:43   ` Andreas Bießmann
2011-06-30  9:06     ` Simon Schwarz
2011-06-30 10:38   ` Aneesh V
2011-06-28 14:14 ` [U-Boot] [3/5]devkit8000 nand_spl: Add RAM configuration independent of x-loader or CH simonschwarzcor at googlemail.com
2011-06-28 14:14 ` [U-Boot] [4/5]devkit8000 nand_spl: Add SPL NAND support to omap_gpmc driver simonschwarzcor at googlemail.com
2011-06-29  8:58   ` Andreas Bießmann
2011-06-30 11:01     ` Simon Schwarz
2011-06-28 14:14 ` [U-Boot] [5/5]devkit8000 nand_spl: add nand_spl support simonschwarzcor at googlemail.com
2011-06-28 15:01   ` Andreas Bießmann
2011-07-25 18:05 ` [U-Boot] [PATCH V2 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-25 18:05   ` [U-Boot] [PATCH V2 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-25 18:05   ` [U-Boot] [PATCH V2 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-26  6:07     ` Andreas Bießmann
2011-07-26  8:42       ` Simon Schwarz
2011-07-28  6:20         ` Aneesh V
2011-07-25 18:05   ` [U-Boot] [PATCH V2 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-26  5:59     ` Andreas Bießmann
2011-07-26  8:47       ` Simon Schwarz
2011-07-25 18:05   ` [U-Boot] [PATCH V2 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-26  6:11     ` Andreas Bießmann
2011-07-25 18:05   ` [U-Boot] [PATCH V2 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-26  6:17     ` Andreas Bießmann
2011-07-26  9:09       ` Simon Schwarz
2011-07-26 10:22   ` [U-Boot] [PATCH V3 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-26 10:22     ` [U-Boot] [PATCH V3 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-26 10:22     ` [U-Boot] [PATCH V3 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-26 10:22     ` [U-Boot] [PATCH V3 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-26 10:22     ` [U-Boot] [PATCH V3 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-26 10:22     ` [U-Boot] [PATCH V3 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-26 10:42       ` Andreas Bießmann
2011-07-26 12:34         ` Simon Schwarz
2011-07-26 11:04       ` Wolfgang Denk
2011-07-26 11:06     ` [U-Boot] [PATCH V3 0/5] OMAP3 and devkit8000 SPL support Wolfgang Denk
2011-07-26 12:31       ` Simon Schwarz
2011-07-26 12:09     ` [U-Boot] [PATCH V4 " Simon Schwarz
2011-07-26 12:09       ` [U-Boot] [PATCH V4 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-26 12:09       ` [U-Boot] [PATCH V4 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-26 18:06         ` Scott Wood
     [not found]           ` <4E2FCF6E.10701@gmail.com>
     [not found]             ` <20110727163839.736d5bed@schlenkerla.am.freescale.net>
2011-07-28  7:51               ` Simon Schwarz
2011-07-28 18:56                 ` Scott Wood
2011-07-29  8:48                   ` Simon Schwarz
2011-07-26 12:09       ` [U-Boot] [PATCH V4 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-26 18:04         ` Scott Wood
2011-07-26 18:12           ` Scott Wood
2011-07-27  9:22           ` Simon Schwarz
2011-07-27 14:55             ` V, Aneesh
2011-07-27 22:01               ` Scott Wood
2011-07-28  7:27                 ` Aneesh V
2011-07-26 12:09       ` [U-Boot] [PATCH V4 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-26 12:09       ` [U-Boot] [PATCH V4 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-27 12:50       ` [U-Boot] [PATCH V5 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-27 12:50         ` [U-Boot] [PATCH V5 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-27 12:50         ` [U-Boot] [PATCH V5 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-27 12:50         ` [U-Boot] [PATCH V5 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-27 12:50         ` [U-Boot] [PATCH V5 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-27 12:50         ` [U-Boot] [PATCH V5 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-28  8:38         ` [U-Boot] [PATCH V6 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-28  8:38           ` [U-Boot] [PATCH V6 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-28  8:50             ` Aneesh V
2011-07-28  9:42               ` Simon Schwarz
2011-07-29 16:53                 ` Simon Schwarz
2011-07-28  8:38           ` [U-Boot] [PATCH V6 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-28  9:42             ` Aneesh V
2011-07-28 12:44               ` Simon Schwarz
2011-07-28 14:24                 ` Aneesh V
2011-07-28 14:34                   ` Simon Schwarz
2011-08-02 12:03               ` Simon Schwarz
2011-08-02 12:18                 ` Aneesh V
2011-08-02 12:30                   ` Simon Schwarz
2011-07-28  9:58             ` Aneesh V
2011-07-28 12:54               ` Simon Schwarz
2011-07-28 14:16             ` Aneesh V
2011-07-28 18:50               ` Scott Wood
2011-07-28 19:07                 ` Wolfgang Denk
2011-07-29  7:34                 ` Aneesh V
2011-07-29  8:19                   ` Simon Schwarz
2011-07-28  8:38           ` [U-Boot] [PATCH V6 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-28 11:54             ` Aneesh V
2011-07-28 14:04               ` Simon Schwarz
2011-07-28 16:18                 ` Aneesh V
2011-07-29 12:17                   ` Simon Schwarz
2011-07-28 19:16             ` Scott Wood
2011-07-29  9:12               ` Simon Schwarz
2011-07-29  9:27                 ` Wolfgang Denk
2011-07-29 12:27                   ` Simon Schwarz
2011-07-28  8:38           ` [U-Boot] [PATCH V6 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-28  8:38           ` [U-Boot] [PATCH V6 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-28 10:51             ` Aneesh V
2011-07-28 11:54               ` Simon Schwarz
2011-07-29 16:53           ` [U-Boot] [PATCH V7 0/7] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-29 16:53             ` [U-Boot] [PATCH V7 1/7] omap-common/omap4: relocate early UART clock setup Simon Schwarz
2011-07-29 16:53             ` [U-Boot] [PATCH V7 2/7] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-29 16:53             ` [U-Boot] [PATCH V7 3/7] omap-common: add nand spl support Simon Schwarz
2011-07-29 16:53             ` [U-Boot] [PATCH V7 4/7] spl: add NAND Library to new SPL Simon Schwarz
2011-08-01 17:58               ` Scott Wood
2011-08-02  8:15                 ` Simon Schwarz
2011-07-29 16:53             ` [U-Boot] [PATCH V7 5/7] spl: Add POWER library to new spl Simon Schwarz
2011-07-29 16:53             ` [U-Boot] [PATCH V7 6/7] omap3: new SPL structure support Simon Schwarz
2011-07-29 16:53             ` [U-Boot] [PATCH V7 7/7] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-08-01 16:23             ` [U-Boot] [PATCH V7 0/7] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-08-02 15:59             ` [U-Boot] [PATCH V8 0/9] " Simon Schwarz
2011-08-02 15:59               ` [U-Boot] [PATCH V8 1/9] omap-common/omap4: relocate early UART clock setup Simon Schwarz
2011-08-02 15:59               ` [U-Boot] [PATCH V8 2/9] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-08-02 15:59               ` [U-Boot] [PATCH V8 3/9] omap-common: add nand spl support Simon Schwarz
2011-08-05  7:30                 ` Aneesh V
2011-08-08  7:50                   ` Simon Schwarz
2011-08-08  9:04                     ` Aneesh V
2011-08-02 15:59               ` [U-Boot] [PATCH V8 4/9] spl: add NAND Library to new SPL Simon Schwarz
2011-08-02 16:12                 ` Scott Wood
2011-08-02 15:59               ` [U-Boot] [PATCH V8 5/9] spl: Add POWER library to new spl Simon Schwarz
2011-08-02 15:59               ` [U-Boot] [PATCH V8 6/9] omap3: new SPL structure support Simon Schwarz
2011-08-02 15:59               ` [U-Boot] [PATCH V8 7/9] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-08-02 15:59               ` [U-Boot] [PATCH V8 8/9] omap3: implement boot parameter saving Simon Schwarz
2011-08-05  7:41                 ` Aneesh V
2011-08-08  8:03                   ` Simon Schwarz
2011-08-08  8:44                     ` Aneesh V
2011-08-08 10:59                       ` Simon Schwarz [this message]
2011-08-02 15:59               ` [U-Boot] [PATCH V8 9/9] omap-common: reorganize spl.c Simon Schwarz
2011-08-08 13:11               ` [U-Boot] [PATCH V9 0/9] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-08-08 13:11                 ` [U-Boot] [PATCH V9 1/9] omap-common/omap4: relocate early UART clock setup Simon Schwarz
2011-08-08 13:11                 ` [U-Boot] [PATCH V9 2/9] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-08-08 13:11                 ` [U-Boot] [PATCH V9 3/9] omap-common: add nand spl support Simon Schwarz
2011-08-08 13:11                 ` [U-Boot] [PATCH V9 4/9] spl: add NAND Library to new SPL Simon Schwarz
2011-08-08 23:34                   ` Scott Wood
2011-08-08 13:11                 ` [U-Boot] [PATCH V9 5/9] spl: Add POWER library to new spl Simon Schwarz
2011-08-08 13:11                 ` [U-Boot] [PATCH V9 6/9] omap3: new SPL structure support Simon Schwarz
2011-08-08 13:11                 ` [U-Boot] [PATCH V9 7/9] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-08-08 13:11                 ` [U-Boot] [PATCH V9 8/9] omap3: implement boot parameter saving Simon Schwarz
2011-08-08 13:11                 ` [U-Boot] [PATCH V9 9/9] omap-common: reorganize spl.c Simon Schwarz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4E3FC192.20209@gmail.com \
    --to=simonschwarzcor@googlemail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox