From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Eric_B=E9nard?= Date: Sat, 13 Aug 2011 09:25:37 +0200 Subject: [U-Boot] [PATCH 2/2] beagleboard: enable HUB power on XM boards In-Reply-To: References: <4DF76FD5.9060906@bct-electronic.com> <4DF7711E.5050702@eukrea.com> Message-ID: <4E4626F1.60205@eukrea.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Jason, On 12/08/2011 23:09, Jason Kridner wrote: > On Tue, Jun 14, 2011 at 10:33 AM, Eric B?nard wrote: >> Hi Christian, >> >> On 14/06/2011 16:27, Christian Spielberger wrote: >>> we have both, a beagle xM-B and a beagle xM-C. The following works on >>> both boards and is different from your patch. It is not possible to >>> differentiate between Rev xM-A and xM-B. Anyway, the only difference is >>> in the processors silicon revision (ES 1.0 to ES 1.1). >>> > ... >> >> ok thanks, I'll include it with an update to the previous patch that fix a >> problem when loading the kernel with USB clocks enabled. > > Eric, Christian, > > Are either of you still planning to send an updated patch to get USB > working on BB-xM-A/B (and not break it for<=BB-C5 and>=BB-xM-C)? > I do have this updated patch ready on a PC at work so I should be able to send it next week Eric