From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Wed, 17 Aug 2011 17:37:50 +0200 Subject: [U-Boot] [PATCH 12/12] da850: print DDR frequency from u-boot In-Reply-To: References: <1312299792-16415-1-git-send-email-nagabhushana.netagunte@ti.com> <1312299792-16415-13-git-send-email-nagabhushana.netagunte@ti.com> <20110802163326.D86901208DCE@gemini.denx.de> Message-ID: <4E4BE04E.8040701@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 08/17/2011 02:47 PM, Netagunte, Nagabhushana wrote: >> Maybe we should use this opportunity to align them? So what example should we follow? Hm, oldest code wins, so here we go: Never heard about this rule, but I agree it makes no sense to have differen commands. >> [dzu at pollux u-boot-testing (master)]$ for f in arch/arm/cpu/arm1136/mx35/generic.c arch/arm/cpu/armv7/mx5/clock.c arch/powerpc/cpu/mpc512x/speed.c arch/powerpc/cpu/mpc83xx/speed.c ; do git describe --contains `git log --follow --pretty=format:%H $f | tail -1` ; done >> v2011.03-rc1~2^2~36 >> v2010.03-rc1~35 >> v1.3.0-rc4~69^2~1 >> U-Boot-1_1_3~20^2~7 >> >> So PowerPC wins ;) I.e. please use "clocks" as the command name, and I'd appreciate it if you send a patch changing the mx35 and mx5 code. No luck here for i.MX ;-). I will send the patch to change the command name for i.MX. Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================