[U-Boot] [PATCH 2/2] mx3fb: move to CONFIG_VIDEO to support videomodes

[Stefano Babic <sbabic@denx.de>]

On 08/24/2011 05:34 PM, Helmut Raiger wrote:
> 
> I just found that the mx3fb driver uses:
> 
> static inline u32 reg_read(unsigned long reg)
> {
>         return __REG(reg);
> }
> 
> static inline void reg_write(u32 value, unsigned long reg)
> {
>         __REG(reg) = value;
> }
> 

i.MX31 is quite old, and it was pushed before general ARM accessors were
introduced in u-boot. This is the reason. I appreciate you will fix this
point.

> I am about to change this to readl() and writel(), should I do it in a 
> separate 'cosmetic only' patch before the really thing?
> As it is more or less a re-write anyway (350 of 900 lines changed), it 
> think its probably ok to do it in one shot.

IMHO you can do in one shot - you can mention this change in the commit
message.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================