[U-Boot] [PATCH] omap3: beagle: Fix build warning

[Heiko Schocher <hs@denx.de>]

Hello Sanjeev,

Premi, Sanjeev wrote:
>> -----Original Message-----
>> From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net] 
>> Sent: Monday, September 05, 2011 5:06 PM
>> To: Premi, Sanjeev
>> Cc: u-boot at lists.denx.de; Heiko Schocher; Wolfgang Denk
>> Subject: Re: [U-Boot] [PATCH] omap3: beagle: Fix build warning
>>
>> Hi Sanjeev,
>>
>> Le 05/09/2011 12:25, Sanjeev Premi a ?crit :
>>> This patch fixes the warning dure to recent changes to the board
>>> configuration:
>>> cmd_i2c.o cmd_i2c.c -c
>>> cmd_i2c.c:109:1: warning: missing braces around initializer
>>> cmd_i2c.c:109:1: warning: (near initialization for 
>> 'i2c_no_probes[0]')
>>> Signed-off-by: Sanjeev Premi<premi@ti.com>
>>> Cc: Jason Kridner<jkridner@beagleboard.org>
>>> ---
>>>
>>>   Patch was compile tested against the latest u-boot-arm.git at:
>>>   58c583b : net: Check network device driver name
>>>
>>>   include/configs/omap3_beagle.h |    2 +-
>>>   1 files changed, 1 insertions(+), 1 deletions(-)
>>>
>>> diff --git a/include/configs/omap3_beagle.h 
>> b/include/configs/omap3_beagle.h
>>> index 18c6deb..a891246 100644
>>> --- a/include/configs/omap3_beagle.h
>>> +++ b/include/configs/omap3_beagle.h
>>> @@ -118,7 +118,7 @@
>>>   #define CONFIG_I2C_MULTI_BUS		1
>>>
>>>   /* Probe all devices */
>>> -#define CONFIG_SYS_I2C_NOPROBES		{0x0, 0x0}
>>> +#define CONFIG_SYS_I2C_NOPROBES		{{0x0, 0x0}}
>>>
>>>   /* USB */
>>>   #define CONFIG_MUSB_UDC			1
>> Won't all board configs which use CONFIG_SYS_I2C_NOPROBES suffer from 
>> the same bug? I would hate to see an endless trickle of 
>> individual board 
>> config patches, and would much prefer a single patch to fix 
>> all boards 
> 
> [sp] Actually, not all boards suffer from this issue.
>      But yes, I can make a single patch and submit it
>      in next couple of hours.

Isn;t this issue introduced just from commit

author	Jason Kridner <jkridner@beagleboard.org>
 Sat, 23 Jul 2011 04:42:44 +0000 (23:42 -0500)
committer	Albert ARIBAUD <albert.u.boot@aribaud.net>
 Sun, 4 Sep 2011 09:36:21 +0000 (11:36 +0200)
commit	f74fc4ae6d6257ecdbc0049f6aa2e96212207f05

so ~1day old ... Hmm, I think, this is just a single board bugfix,
as this warning only raises, if CONFIG_I2C_MULTI_BUS and
CONFIG_SYS_I2C_NOPROBES is defined ... as introduced for the beagle
board through above commit ... other boards should be clean, as I tend
to do a MAKEALL after applying patches from ML ... but if you find
time and can check this, it would be nice!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany