* [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-09 8:23 ` Stefano Babic
2011-09-08 20:42 ` [U-Boot] [PATCH 02/31] iMX28: Add basic support for DENX M28EVK board Marek Vasut
` (29 subsequent siblings)
30 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
This patch supports:
- Timers
- Debug UART
- Clock
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
arch/arm/cpu/arm926ejs/mx28/Makefile | 46 +++
arch/arm/cpu/arm926ejs/mx28/clock.c | 359 ++++++++++++++++++++++
arch/arm/cpu/arm926ejs/mx28/mx28.c | 131 ++++++++
arch/arm/cpu/arm926ejs/mx28/timer.c | 143 +++++++++
arch/arm/include/asm/arch-mx28/clock.h | 48 +++
arch/arm/include/asm/arch-mx28/imx-regs.h | 33 ++
arch/arm/include/asm/arch-mx28/mx28.h | 30 ++
arch/arm/include/asm/arch-mx28/regs-base.h | 88 ++++++
arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 308 +++++++++++++++++++
arch/arm/include/asm/arch-mx28/regs-common.h | 66 ++++
arch/arm/include/asm/arch-mx28/regs-power.h | 409 +++++++++++++++++++++++++
arch/arm/include/asm/arch-mx28/regs-ssp.h | 345 +++++++++++++++++++++
arch/arm/include/asm/arch-mx28/regs-timrot.h | 167 ++++++++++
arch/arm/include/asm/arch-mx28/regs-uartdbg.h | 182 +++++++++++
14 files changed, 2355 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/mx28/Makefile
create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c
create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c
create mode 100644 arch/arm/include/asm/arch-mx28/clock.h
create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h
create mode 100644 arch/arm/include/asm/arch-mx28/mx28.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-uartdbg.h
diff --git a/arch/arm/cpu/arm926ejs/mx28/Makefile b/arch/arm/cpu/arm926ejs/mx28/Makefile
new file mode 100644
index 0000000..98504f9
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx28/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+COBJS = clock.o mx28.o timer.o
+
+SRCS := $(START:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/arm926ejs/mx28/clock.c b/arch/arm/cpu/arm926ejs/mx28/clock.c
new file mode 100644
index 0000000..c81c305
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx28/clock.c
@@ -0,0 +1,359 @@
+/*
+ * Freescale i.MX28 clock setup code
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/regs-ssp.h>
+
+/* The PLL frequency is always 480MHz, see section 10.2 in iMX28 datasheet. */
+#define PLL_FREQ_KHZ 480000
+#define PLL_FREQ_COEF 18
+/* The XTAL frequency is always 24MHz, see section 10.2 in iMX28 datasheet. */
+#define XTAL_FREQ_KHZ 24000
+
+#define PLL_FREQ_MHZ (PLL_FREQ_KHZ / 1000)
+#define XTAL_FREQ_MHZ (XTAL_FREQ_KHZ / 1000)
+
+uint32_t mx28_get_pclk(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ uint32_t clkctrl, clkseq, clkfrac;
+ uint32_t frac, div;
+
+ clkctrl = readl(&clkctrl_regs->hw_clkctrl_cpu);
+
+ /* No support of fractional divider calculation */
+ if (clkctrl &
+ (CLKCTRL_CPU_DIV_XTAL_FRAC_EN | CLKCTRL_CPU_DIV_CPU_FRAC_EN)) {
+ return 0;
+ }
+
+ clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+
+ /* XTAL Path */
+ if (clkseq & CLKCTRL_CLKSEQ_BYPASS_CPU) {
+ div = (clkctrl & CLKCTRL_CPU_DIV_XTAL_MASK) >>
+ CLKCTRL_CPU_DIV_XTAL_OFFSET;
+ return XTAL_FREQ_MHZ / div;
+ }
+
+ /* REF Path */
+ clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac0);
+ frac = clkfrac & CLKCTRL_FRAC0_CPUFRAC_MASK;
+ div = clkctrl & CLKCTRL_CPU_DIV_CPU_MASK;
+ return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
+}
+
+uint32_t mx28_get_hclk(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ uint32_t div;
+ uint32_t clkctrl;
+
+ clkctrl = readl(&clkctrl_regs->hw_clkctrl_hbus);
+
+ /* No support of fractional divider calculation */
+ if (clkctrl & CLKCTRL_HBUS_DIV_FRAC_EN)
+ return 0;
+
+ div = clkctrl & CLKCTRL_HBUS_DIV_MASK;
+ return mx28_get_pclk() / div;
+}
+
+uint32_t mx28_get_emiclk(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ uint32_t frac, div;
+ uint32_t clkctrl, clkseq, clkfrac;
+
+ clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+ clkctrl = readl(&clkctrl_regs->hw_clkctrl_emi);
+
+ /* XTAL Path */
+ if (clkseq & CLKCTRL_CLKSEQ_BYPASS_EMI) {
+ div = (clkctrl & CLKCTRL_EMI_DIV_XTAL_MASK) >>
+ CLKCTRL_EMI_DIV_XTAL_OFFSET;
+ return XTAL_FREQ_MHZ / div;
+ }
+
+ clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac0);
+
+ /* REF Path */
+ frac = (clkfrac & CLKCTRL_FRAC0_EMIFRAC_MASK) >>
+ CLKCTRL_FRAC0_EMIFRAC_OFFSET;
+ div = clkctrl & CLKCTRL_EMI_DIV_EMI_MASK;
+ return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
+}
+
+static inline void enable_gpmi_clk(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ /* Clear bypass bit */
+ writel(CLKCTRL_CLKSEQ_BYPASS_GPMI,
+ &clkctrl_regs->hw_clkctrl_clkseq_set);
+
+ /* Set GPMI clock to ref_gpmi / 12 */
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_gpmi,
+ CLKCTRL_GPMI_CLKGATE | CLKCTRL_GPMI_DIV_MASK, 1);
+}
+
+uint32_t mx28_get_gpmiclk(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ uint32_t frac, div;
+ uint32_t clkctrl, clkseq, clkfrac;
+
+ /* Enable GPMI clock */
+ enable_gpmi_clk();
+
+ clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+ clkctrl = readl(&clkctrl_regs->hw_clkctrl_gpmi);
+
+ /* XTAL Path */
+ if (clkseq & CLKCTRL_CLKSEQ_BYPASS_GPMI) {
+ div = clkctrl & CLKCTRL_GPMI_DIV_MASK;
+ return XTAL_FREQ_MHZ / div;
+ }
+
+ clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac1);
+
+ /* REF Path */
+ frac = (clkfrac & CLKCTRL_FRAC1_GPMIFRAC_MASK) >>
+ CLKCTRL_FRAC1_GPMIFRAC_OFFSET;
+ div = clkctrl & CLKCTRL_GPMI_DIV_MASK;
+ return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
+}
+
+/*
+ * Set IO clock frequency, in kHz
+ */
+void mx28_set_ioclk(unsigned int io, uint32_t freq)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ uint32_t div;
+
+ if (freq == 0)
+ return;
+
+ if (io > 1)
+ return;
+
+ div = (PLL_FREQ_KHZ * PLL_FREQ_COEF) / freq;
+
+ if (div < 18)
+ div = 18;
+
+ if (div > 35)
+ div = 35;
+
+ if (io == 0) {
+ writel(CLKCTRL_FRAC0_CLKGATEIO0,
+ &clkctrl_regs->hw_clkctrl_frac0_set);
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0,
+ CLKCTRL_FRAC0_IO0FRAC_MASK,
+ div << CLKCTRL_FRAC0_IO0FRAC_OFFSET);
+ writel(CLKCTRL_FRAC0_CLKGATEIO0,
+ &clkctrl_regs->hw_clkctrl_frac0_clr);
+ } else {
+ writel(CLKCTRL_FRAC0_CLKGATEIO1,
+ &clkctrl_regs->hw_clkctrl_frac0_set);
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0,
+ CLKCTRL_FRAC0_IO1FRAC_MASK,
+ div << CLKCTRL_FRAC0_IO1FRAC_OFFSET);
+ writel(CLKCTRL_FRAC0_CLKGATEIO1,
+ &clkctrl_regs->hw_clkctrl_frac0_clr);
+ }
+}
+
+/*
+ * Get IO clock, returns IO clock in kHz
+ */
+uint32_t mx28_get_ioclk(unsigned int io)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ uint32_t tmp, ret;
+
+ if (io > 1)
+ return 0;
+
+ tmp = readl(&clkctrl_regs->hw_clkctrl_frac0);
+
+ if (io == 0)
+ ret = (tmp & CLKCTRL_FRAC0_IO0FRAC_MASK) >>
+ CLKCTRL_FRAC0_IO0FRAC_OFFSET;
+ else
+ ret = (tmp & CLKCTRL_FRAC0_IO1FRAC_MASK) >>
+ CLKCTRL_FRAC0_IO1FRAC_OFFSET;
+
+ return (PLL_FREQ_KHZ * PLL_FREQ_COEF) / ret;
+}
+
+/*
+ * Configure SSP clock frequency, in kHz
+ */
+void mx28_set_sspclk(unsigned int ssp, uint32_t freq, int xtal)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ uint32_t clk, clkreg;
+
+ if (ssp > 3)
+ return;
+
+ clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) + (ssp * 0x10);
+
+ clrbits_le32(clkreg, CLKCTRL_SSP_CLKGATE);
+ while (readl(clkreg) & CLKCTRL_SSP_CLKGATE)
+ ;
+
+ if (xtal)
+ clk = XTAL_FREQ_KHZ;
+ else
+ clk = mx28_get_ioclk(ssp >> 1);
+
+ if (freq > clk)
+ return;
+
+ /* Calculate the divider and cap it if necessary */
+ clk /= freq;
+ if (clk > CLKCTRL_SSP_DIV_MASK)
+ clk = CLKCTRL_SSP_DIV_MASK;
+
+ clrsetbits_le32(clkreg, CLKCTRL_SSP_DIV_MASK, clk);
+ while (readl(clkreg) & CLKCTRL_SSP_BUSY)
+ ;
+
+ if (xtal)
+ writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp,
+ &clkctrl_regs->hw_clkctrl_clkseq_set);
+ else
+ writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp,
+ &clkctrl_regs->hw_clkctrl_clkseq_clr);
+}
+
+/*
+ * Return SSP frequency, in kHz
+ */
+uint32_t mx28_get_sspclk(unsigned int ssp)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ uint32_t clkreg;
+ uint32_t clk, tmp;
+
+ if (ssp > 3)
+ return 0;
+
+ tmp = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+ if (tmp & (CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp))
+ return XTAL_FREQ_KHZ;
+
+ clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) + (ssp * 0x10);
+
+ tmp = readl(clkreg) & CLKCTRL_SSP_DIV_MASK;
+
+ if (tmp == 0)
+ return 0;
+
+ clk = mx28_get_ioclk(ssp >> 1);
+
+ return clk / tmp;
+}
+
+/*
+ * Set SSP/MMC bus frequency, in kHz)
+ */
+void mx28_set_ssp_busclock(unsigned int bus, uint32_t freq)
+{
+ struct mx28_ssp_regs *ssp_regs;
+ const uint32_t sspclk = mx28_get_sspclk(bus);
+ uint32_t reg;
+ uint32_t divide, rate, tgtclk;
+
+ ssp_regs = (struct mx28_ssp_regs *)(MXS_SSP0_BASE + (bus * 0x2000));
+
+ /*
+ * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)),
+ * CLOCK_DIVIDE has to be an even value from 2 to 254, and
+ * CLOCK_RATE could be any integer from 0 to 255.
+ */
+ for (divide = 2; divide < 254; divide += 2) {
+ rate = sspclk / freq / divide;
+ if (rate <= 256)
+ break;
+ }
+
+ tgtclk = sspclk / divide / rate;
+ while (tgtclk > freq) {
+ rate++;
+ tgtclk = sspclk / divide / rate;
+ }
+ if (rate > 256)
+ rate = 256;
+
+ /* Always set timeout the maximum */
+ reg = SSP_TIMING_TIMEOUT_MASK |
+ (divide << SSP_TIMING_CLOCK_DIVIDE_OFFSET) |
+ ((rate - 1) << SSP_TIMING_CLOCK_RATE_OFFSET);
+ writel(reg, &ssp_regs->hw_ssp_timing);
+
+ debug("SPI%d: Set freq rate to %d KHz (requested %d KHz)\n",
+ bus, tgtclk, freq);
+}
+
+uint32_t mxc_get_clock(enum mxc_clock clk)
+{
+ switch (clk) {
+ case MXC_ARM_CLK:
+ return mx28_get_pclk() * 1000000;
+ case MXC_GPMI_CLK:
+ return mx28_get_gpmiclk() * 1000000;
+ case MXC_AHB_CLK:
+ case MXC_IPG_CLK:
+ return mx28_get_hclk() * 1000000;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c
new file mode 100644
index 0000000..e3df76b
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -0,0 +1,131 @@
+/*
+ * Freescale i.MX28 common code
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/regs-power.h>
+#include <asm/arch/mx28.h>
+
+/* 1 second delay should be plenty of time for block reset. */
+#define RESET_MAX_TIMEOUT 1000000
+
+#define MX28_BLOCK_SFTRST (1 << 31)
+#define MX28_BLOCK_CLKGATE (1 << 30)
+
+/* Lowlevel init isn't used on i.MX28, so just have a dummy here */
+inline void lowlevel_init(void) {}
+
+void reset_cpu(ulong ignored) __attribute__((noreturn));
+
+void reset_cpu(ulong ignored)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ writel(0, &power_regs->hw_power_charge);
+ writel(0, &power_regs->hw_power_minpwr);
+ writel(CLKCTRL_RESET_DIG, &clkctrl_regs->hw_clkctrl_reset);
+
+ /* Endless loop, reset will exit from here */
+ for (;;)
+ ;
+}
+
+int mx28_wait_mask_set(struct mx28_register *reg, uint32_t mask, int timeout)
+{
+ while (--timeout) {
+ if ((readl(®->reg) & mask) == mask)
+ break;
+ udelay(1);
+ }
+
+ return !timeout;
+}
+
+int mx28_wait_mask_clr(struct mx28_register *reg, uint32_t mask, int timeout)
+{
+ while (--timeout) {
+ if ((readl(®->reg) & mask) == 0)
+ break;
+ udelay(1);
+ }
+
+ return !timeout;
+}
+
+int mx28_reset_block(struct mx28_register *reg)
+{
+ /* Clear SFTRST */
+ writel(MX28_BLOCK_SFTRST, ®->reg_clr);
+
+ if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
+ return 1;
+
+ /* Clear CLKGATE */
+ writel(MX28_BLOCK_CLKGATE, ®->reg_clr);
+
+ /* Set SFTRST */
+ writel(MX28_BLOCK_SFTRST, ®->reg_set);
+
+ /* Wait for CLKGATE being set */
+ if (mx28_wait_mask_set(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
+ return 1;
+
+ /* Clear SFTRST */
+ writel(MX28_BLOCK_SFTRST, ®->reg_clr);
+
+ if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
+ return 1;
+
+ /* Clear CLKGATE */
+ writel(MX28_BLOCK_CLKGATE, ®->reg_clr);
+
+ if (mx28_wait_mask_clr(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
+ return 1;
+
+ return 0;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ printf("Freescale i.MX28 family\n");
+ printf("CPU: %3d MHz\n", mx28_get_pclk());
+ printf("BUS: %3d MHz\n", mx28_get_hclk());
+ printf("EMI: %3d MHz\n", mx28_get_emiclk());
+ printf("GPMI: %3d MHz\n", mx28_get_gpmiclk());
+ return 0;
+}
+#endif
diff --git a/arch/arm/cpu/arm926ejs/mx28/timer.c b/arch/arm/cpu/arm926ejs/mx28/timer.c
new file mode 100644
index 0000000..548cfe3
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx28/timer.c
@@ -0,0 +1,143 @@
+/*
+ * Freescale i.MX28 timer driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * (C) Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-timrot.h>
+#include <asm/arch/mx28.h>
+
+/* Maximum fixed count */
+#define TIMER_LOAD_VAL 0xffffffff
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp (gd->tbl)
+#define lastdec (gd->lastinc)
+
+/*
+ * This driver uses 1kHz clock source.
+ */
+#define MX28_INCREMENTER_HZ 1000
+
+static inline unsigned long tick_to_time(unsigned long tick)
+{
+ return tick / (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ);
+}
+
+static inline unsigned long time_to_tick(unsigned long time)
+{
+ return time * (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ);
+}
+
+/* Calculate how many ticks happen in "us" microseconds */
+static inline unsigned long us_to_tick(unsigned long us)
+{
+ return (us * MX28_INCREMENTER_HZ) / 1000000;
+}
+
+int timer_init(void)
+{
+ struct mx28_timrot_regs *timrot_regs =
+ (struct mx28_timrot_regs *)MXS_TIMROT_BASE;
+
+ /* Reset Timers and Rotary Encoder module */
+ mx28_reset_block(&timrot_regs->hw_timrot_rotctrl_reg);
+
+ /* Set fixed_count to 0 */
+ writel(0, &timrot_regs->hw_timrot_fixed_count0);
+
+ /* Set UPDATE bit and 1Khz frequency */
+ writel(TIMROT_TIMCTRLn_UPDATE | TIMROT_TIMCTRLn_RELOAD |
+ TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL,
+ &timrot_regs->hw_timrot_timctrl0);
+
+ /* Set fixed_count to maximal value */
+ writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0);
+
+ return 0;
+}
+
+ulong get_timer(ulong base)
+{
+ struct mx28_timrot_regs *timrot_regs =
+ (struct mx28_timrot_regs *)MXS_TIMROT_BASE;
+
+ /* Current tick value */
+ uint32_t now = readl(&timrot_regs->hw_timrot_running_count0);
+
+ if (lastdec >= now) {
+ /*
+ * normal mode (non roll)
+ * move stamp forward with absolut diff ticks
+ */
+ timestamp += (lastdec - now);
+ } else {
+ /* we have rollover of decrementer */
+ timestamp += (TIMER_LOAD_VAL - now) + lastdec;
+
+ }
+ lastdec = now;
+
+ return tick_to_time(timestamp) - base;
+}
+
+/* We use the HW_DIGCTL_MICROSECONDS register for sub-millisecond timer. */
+#define MX28_HW_DIGCTL_MICROSECONDS 0x8001c0c0
+
+void __udelay(unsigned long usec)
+{
+ uint32_t old, new, incr;
+ uint32_t counter = 0;
+
+ old = readl(MX28_HW_DIGCTL_MICROSECONDS);
+
+ while (counter < usec) {
+ new = readl(MX28_HW_DIGCTL_MICROSECONDS);
+
+ /* Check if the timer wrapped. */
+ if (new < old) {
+ incr = 0xffffffff - old;
+ incr += new;
+ } else {
+ incr = new - old;
+ }
+
+ /*
+ * Check if we are close to the maximum time and the counter
+ * would wrap if incremented. If that's the case, break out
+ * from the loop as the requested delay time passed.
+ */
+ if (counter + incr < counter)
+ break;
+
+ counter += incr;
+ old = new;
+ }
+}
diff --git a/arch/arm/include/asm/arch-mx28/clock.h b/arch/arm/include/asm/arch-mx28/clock.h
new file mode 100644
index 0000000..5e13a51
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/clock.h
@@ -0,0 +1,48 @@
+/*
+ * Freescale i.MX28 Clock
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __CLOCK_H__
+#define __CLOCK_H__
+
+enum mxc_clock {
+ MXC_ARM_CLK = 0,
+ MXC_AHB_CLK,
+ MXC_IPG_CLK,
+ MXC_GPMI_CLK,
+};
+
+uint32_t mxc_get_clock(enum mxc_clock clk);
+uint32_t mx28_get_pclk(void);
+uint32_t mx28_get_hclk(void);
+uint32_t mx28_get_emiclk(void);
+uint32_t mx28_get_gpmiclk(void);
+
+void mx28_set_ioclk(unsigned int io, uint32_t freq);
+uint32_t mx28_get_ioclk(unsigned int io);
+void mx28_set_sspclk(unsigned int ssp, uint32_t freq, int xtal);
+uint32_t mx28_get_sspclk(unsigned int ssp);
+void mx28_set_ssp_busclock(unsigned int bus, uint32_t freq);
+
+/* Compatibility with the FEC Ethernet driver */
+#define imx_get_fecclk() (mx28_get_hclk() * 1000000)
+
+#endif /* __CLOCK_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/imx-regs.h b/arch/arm/include/asm/arch-mx28/imx-regs.h
new file mode 100644
index 0000000..a082f1d
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/imx-regs.h
@@ -0,0 +1,33 @@
+/*
+ * Freescale i.MX28 Registers
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __IMX_REGS_H__
+#define __IMX_REGS_H__
+
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/regs-ssp.h>
+#include <asm/arch/regs-timrot.h>
+#include <asm/arch/regs-uartdbg.h>
+
+#endif /* __IMX_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/mx28.h b/arch/arm/include/asm/arch-mx28/mx28.h
new file mode 100644
index 0000000..a262c05
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/mx28.h
@@ -0,0 +1,30 @@
+/*
+ * Freescale i.MX28 MX28 specific functions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_H__
+#define __MX28_H__
+
+int mx28_reset_block(struct mx28_register *reg);
+int mx28_wait_mask_set(struct mx28_register *reg, uint32_t mask, int timeout);
+int mx28_wait_mask_clr(struct mx28_register *reg, uint32_t mask, int timeout);
+
+#endif /* __MX28_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-base.h b/arch/arm/include/asm/arch-mx28/regs-base.h
new file mode 100644
index 0000000..71e6b98
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-base.h
@@ -0,0 +1,88 @@
+/*
+ * Freescale i.MX28 Peripheral Base Addresses
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2008 Embedded Alley Solutions Inc.
+ *
+ * (C) Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_BASE_H__
+#define __REGS_BASE_H__
+
+/*
+ * Register base address
+ */
+#define MXS_ICOL_BASE 0x80000000
+#define MXS_HSADC_BASE 0x80002000
+#define MXS_APBH_BASE 0x80004000
+#define MXS_PERFMON_BASE 0x80006000
+#define MXS_BCH_BASE 0x8000A000
+#define MXS_GPMI_BASE 0x8000C000
+#define MXS_SSP0_BASE 0x80010000
+#define MXS_SSP1_BASE 0x80012000
+#define MXS_SSP2_BASE 0x80014000
+#define MXS_SSP3_BASE 0x80016000
+#define MXS_PINCTRL_BASE 0x80018000
+#define MXS_DIGCTL_BASE 0x8001C000
+#define MXS_ETM_BASE 0x80022000
+#define MXS_APBX_BASE 0x80024000
+#define MXS_DCP_BASE 0x80028000
+#define MXS_PXP_BASE 0x8002A000
+#define MXS_OCOTP_BASE 0x8002C000
+#define MXS_AXI_AHB0_BASE 0x8002E000
+#define MXS_LCDIF_BASE 0x80030000
+#define MXS_CAN0_BASE 0x80032000
+#define MXS_CAN1_BASE 0x80034000
+#define MXS_SIMDBG_BASE 0x8003C000
+#define MXS_SIMGPMISEL_BASE 0x8003C200
+#define MXS_SIMSSPSEL_BASE 0x8003C300
+#define MXS_SIMMEMSEL_BASE 0x8003C400
+#define MXS_GPIOMON_BASE 0x8003C500
+#define MXS_SIMENET_BASE 0x8003C700
+#define MXS_ARMJTAG_BASE 0x8003C800
+#define MXS_CLKCTRL_BASE 0x80040000
+#define MXS_SAIF0_BASE 0x80042000
+#define MXS_POWER_BASE 0x80044000
+#define MXS_SAIF1_BASE 0x80046000
+#define MXS_LRADC_BASE 0x80050000
+#define MXS_SPDIF_BASE 0x80054000
+#define MXS_RTC_BASE 0x80056000
+#define MXS_I2C0_BASE 0x80058000
+#define MXS_I2C1_BASE 0x8005A000
+#define MXS_PWM_BASE 0x80064000
+#define MXS_TIMROT_BASE 0x80068000
+#define MXS_UARTAPP0_BASE 0x8006A000
+#define MXS_UARTAPP1_BASE 0x8006C000
+#define MXS_UARTAPP2_BASE 0x8006E000
+#define MXS_UARTAPP3_BASE 0x80070000
+#define MXS_UARTAPP4_BASE 0x80072000
+#define MXS_UARTDBG_BASE 0x80074000
+#define MXS_USBPHY0_BASE 0x8007C000
+#define MXS_USBPHY1_BASE 0x8007E000
+#define MXS_USBCTRL0_BASE 0x80080000
+#define MXS_USBCTRL1_BASE 0x80090000
+#define MXS_DFLPT_BASE 0x800C0000
+#define MXS_DRAM_BASE 0x800E0000
+#define MXS_ENET0_BASE 0x800F0000
+#define MXS_ENET1_BASE 0x800F4000
+
+#endif /* __REGS_BASE_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-clkctrl.h b/arch/arm/include/asm/arch-mx28/regs-clkctrl.h
new file mode 100644
index 0000000..66d492f
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-clkctrl.h
@@ -0,0 +1,308 @@
+/*
+ * Freescale i.MX28 CLKCTRL Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_CLKCTRL_H__
+#define __REGS_CLKCTRL_H__
+
+struct mx28_clkctrl_regs {
+ mx28_reg(hw_clkctrl_pll0ctrl0) /* 0x00 */
+ mx28_reg(hw_clkctrl_pll0ctrl1) /* 0x10 */
+ mx28_reg(hw_clkctrl_pll1ctrl0) /* 0x20 */
+ mx28_reg(hw_clkctrl_pll1ctrl1) /* 0x30 */
+ mx28_reg(hw_clkctrl_pll2ctrl0) /* 0x40 */
+ mx28_reg(hw_clkctrl_cpu) /* 0x50 */
+ mx28_reg(hw_clkctrl_hbus) /* 0x60 */
+ mx28_reg(hw_clkctrl_xbus) /* 0x70 */
+ mx28_reg(hw_clkctrl_xtal) /* 0x80 */
+ mx28_reg(hw_clkctrl_ssp0) /* 0x90 */
+ mx28_reg(hw_clkctrl_ssp1) /* 0xa0 */
+ mx28_reg(hw_clkctrl_ssp2) /* 0xb0 */
+ mx28_reg(hw_clkctrl_ssp3) /* 0xc0 */
+ mx28_reg(hw_clkctrl_gpmi) /* 0xd0 */
+ mx28_reg(hw_clkctrl_spdif) /* 0xe0 */
+ mx28_reg(hw_clkctrl_emi) /* 0xf0 */
+ mx28_reg(hw_clkctrl_saif0) /* 0x100 */
+ mx28_reg(hw_clkctrl_saif1) /* 0x110 */
+ mx28_reg(hw_clkctrl_lcdif) /* 0x120 */
+ mx28_reg(hw_clkctrl_etm) /* 0x130 */
+ mx28_reg(hw_clkctrl_enet) /* 0x140 */
+ mx28_reg(hw_clkctrl_hsadc) /* 0x150 */
+ mx28_reg(hw_clkctrl_flexcan) /* 0x160 */
+
+ uint32_t reserved[16];
+
+ mx28_reg(hw_clkctrl_frac0) /* 0x1b0 */
+ mx28_reg(hw_clkctrl_frac1) /* 0x1c0 */
+ mx28_reg(hw_clkctrl_clkseq) /* 0x1d0 */
+ mx28_reg(hw_clkctrl_reset) /* 0x1e0 */
+ mx28_reg(hw_clkctrl_status) /* 0x1f0 */
+ mx28_reg(hw_clkctrl_version) /* 0x200 */
+};
+
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_MASK (0x3 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_OFFSET 28
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_DEFAULT (0x0 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_2 (0x1 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_05 (0x2 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_UNDEFINED (0x3 << 28)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_MASK (0x3 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_OFFSET 24
+#define CLKCTRL_PLL0CTRL0_CP_SEL_DEFAULT (0x0 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_2 (0x1 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_05 (0x2 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_UNDEFINED (0x3 << 24)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_MASK (0x3 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_OFFSET 20
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_DEFAULT (0x0 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWER (0x1 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWEST (0x2 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_UNDEFINED (0x3 << 20)
+#define CLKCTRL_PLL0CTRL0_EN_USB_CLKS (1 << 18)
+#define CLKCTRL_PLL0CTRL0_POWER (1 << 17)
+
+#define CLKCTRL_PLL0CTRL1_LOCK (1 << 31)
+#define CLKCTRL_PLL0CTRL1_FORCE_LOCK (1 << 30)
+#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_MASK 0xffff
+#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_OFFSET 0
+
+#define CLKCTRL_PLL1CTRL0_CLKGATEEMI (1 << 31)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_MASK (0x3 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_OFFSET 28
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_DEFAULT (0x0 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_TIMES_2 (0x1 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_TIMES_05 (0x2 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_UNDEFINED (0x3 << 28)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_MASK (0x3 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_OFFSET 24
+#define CLKCTRL_PLL1CTRL0_CP_SEL_DEFAULT (0x0 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_TIMES_2 (0x1 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_TIMES_05 (0x2 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_UNDEFINED (0x3 << 24)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_MASK (0x3 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_OFFSET 20
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_DEFAULT (0x0 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_LOWER (0x1 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_LOWEST (0x2 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_UNDEFINED (0x3 << 20)
+#define CLKCTRL_PLL1CTRL0_EN_USB_CLKS (1 << 18)
+#define CLKCTRL_PLL1CTRL0_POWER (1 << 17)
+
+#define CLKCTRL_PLL1CTRL1_LOCK (1 << 31)
+#define CLKCTRL_PLL1CTRL1_FORCE_LOCK (1 << 30)
+#define CLKCTRL_PLL1CTRL1_LOCK_COUNT_MASK 0xffff
+#define CLKCTRL_PLL1CTRL1_LOCK_COUNT_OFFSET 0
+
+#define CLKCTRL_PLL2CTRL0_CLKGATE (1 << 31)
+#define CLKCTRL_PLL2CTRL0_LFR_SEL_MASK (0x3 << 28)
+#define CLKCTRL_PLL2CTRL0_LFR_SEL_OFFSET 28
+#define CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B (1 << 26)
+#define CLKCTRL_PLL2CTRL0_CP_SEL_MASK (0x3 << 24)
+#define CLKCTRL_PLL2CTRL0_CP_SEL_OFFSET 24
+#define CLKCTRL_PLL2CTRL0_POWER (1 << 23)
+
+#define CLKCTRL_CPU_BUSY_REF_XTAL (1 << 29)
+#define CLKCTRL_CPU_BUSY_REF_CPU (1 << 28)
+#define CLKCTRL_CPU_DIV_XTAL_FRAC_EN (1 << 26)
+#define CLKCTRL_CPU_DIV_XTAL_MASK (0x3ff << 16)
+#define CLKCTRL_CPU_DIV_XTAL_OFFSET 16
+#define CLKCTRL_CPU_INTERRUPT_WAIT (1 << 12)
+#define CLKCTRL_CPU_DIV_CPU_FRAC_EN (1 << 10)
+#define CLKCTRL_CPU_DIV_CPU_MASK 0x3f
+#define CLKCTRL_CPU_DIV_CPU_OFFSET 0
+
+#define CLKCTRL_HBUS_ASM_BUSY (1 << 31)
+#define CLKCTRL_HBUS_DCP_AS_ENABLE (1 << 30)
+#define CLKCTRL_HBUS_PXP_AS_ENABLE (1 << 29)
+#define CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE (1 << 27)
+#define CLKCTRL_HBUS_APBHDMA_AS_ENABLE (1 << 26)
+#define CLKCTRL_HBUS_APBXDMA_AS_ENABLE (1 << 25)
+#define CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE (1 << 24)
+#define CLKCTRL_HBUS_TRAFFIC_AS_ENABLE (1 << 23)
+#define CLKCTRL_HBUS_CPU_DATA_AS_ENABLE (1 << 22)
+#define CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE (1 << 21)
+#define CLKCTRL_HBUS_ASM_ENABLE (1 << 20)
+#define CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE (1 << 19)
+#define CLKCTRL_HBUS_SLOW_DIV_MASK (0x7 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_OFFSET 16
+#define CLKCTRL_HBUS_SLOW_DIV_BY1 (0x0 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY2 (0x1 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY4 (0x2 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY8 (0x3 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY16 (0x4 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY32 (0x5 << 16)
+#define CLKCTRL_HBUS_DIV_FRAC_EN (1 << 5)
+#define CLKCTRL_HBUS_DIV_MASK 0x1f
+#define CLKCTRL_HBUS_DIV_OFFSET 0
+
+#define CLKCTRL_XBUS_BUSY (1 << 31)
+#define CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE (1 << 11)
+#define CLKCTRL_XBUS_DIV_FRAC_EN (1 << 10)
+#define CLKCTRL_XBUS_DIV_MASK 0x3ff
+#define CLKCTRL_XBUS_DIV_OFFSET 0
+
+#define CLKCTRL_XTAL_UART_CLK_GATE (1 << 31)
+#define CLKCTRL_XTAL_PWM_CLK24M_GATE (1 << 29)
+#define CLKCTRL_XTAL_TIMROT_CLK32K_GATE (1 << 26)
+#define CLKCTRL_XTAL_DIV_UART_MASK 0x3
+#define CLKCTRL_XTAL_DIV_UART_OFFSET 0
+
+#define CLKCTRL_SSP_CLKGATE (1 << 31)
+#define CLKCTRL_SSP_BUSY (1 << 29)
+#define CLKCTRL_SSP_DIV_FRAC_EN (1 << 9)
+#define CLKCTRL_SSP_DIV_MASK 0x1ff
+#define CLKCTRL_SSP_DIV_OFFSET 0
+
+#define CLKCTRL_GPMI_CLKGATE (1 << 31)
+#define CLKCTRL_GPMI_BUSY (1 << 29)
+#define CLKCTRL_GPMI_DIV_FRAC_EN (1 << 10)
+#define CLKCTRL_GPMI_DIV_MASK 0x3ff
+#define CLKCTRL_GPMI_DIV_OFFSET 0
+
+#define CLKCTRL_SPDIF_CLKGATE (1 << 31)
+
+#define CLKCTRL_EMI_CLKGATE (1 << 31)
+#define CLKCTRL_EMI_SYNC_MODE_EN (1 << 30)
+#define CLKCTRL_EMI_BUSY_REF_XTAL (1 << 29)
+#define CLKCTRL_EMI_BUSY_REF_EMI (1 << 28)
+#define CLKCTRL_EMI_BUSY_REF_CPU (1 << 27)
+#define CLKCTRL_EMI_BUSY_SYNC_MODE (1 << 26)
+#define CLKCTRL_EMI_BUSY_DCC_RESYNC (1 << 17)
+#define CLKCTRL_EMI_DCC_RESYNC_ENABLE (1 << 16)
+#define CLKCTRL_EMI_DIV_XTAL_MASK (0xf << 8)
+#define CLKCTRL_EMI_DIV_XTAL_OFFSET 8
+#define CLKCTRL_EMI_DIV_EMI_MASK 0x3f
+#define CLKCTRL_EMI_DIV_EMI_OFFSET 0
+
+#define CLKCTRL_SAIF0_CLKGATE (1 << 31)
+#define CLKCTRL_SAIF0_BUSY (1 << 29)
+#define CLKCTRL_SAIF0_DIV_FRAC_EN (1 << 16)
+#define CLKCTRL_SAIF0_DIV_MASK 0xffff
+#define CLKCTRL_SAIF0_DIV_OFFSET 0
+
+#define CLKCTRL_SAIF1_CLKGATE (1 << 31)
+#define CLKCTRL_SAIF1_BUSY (1 << 29)
+#define CLKCTRL_SAIF1_DIV_FRAC_EN (1 << 16)
+#define CLKCTRL_SAIF1_DIV_MASK 0xffff
+#define CLKCTRL_SAIF1_DIV_OFFSET 0
+
+#define CLKCTRL_DIS_LCDIF_CLKGATE (1 << 31)
+#define CLKCTRL_DIS_LCDIF_BUSY (1 << 29)
+#define CLKCTRL_DIS_LCDIF_DIV_FRAC_EN (1 << 13)
+#define CLKCTRL_DIS_LCDIF_DIV_MASK 0x1fff
+#define CLKCTRL_DIS_LCDIF_DIV_OFFSET 0
+
+#define CLKCTRL_ETM_CLKGATE (1 << 31)
+#define CLKCTRL_ETM_BUSY (1 << 29)
+#define CLKCTRL_ETM_DIV_FRAC_EN (1 << 7)
+#define CLKCTRL_ETM_DIV_MASK 0x7f
+#define CLKCTRL_ETM_DIV_OFFSET 0
+
+#define CLKCTRL_ENET_SLEEP (1 << 31)
+#define CLKCTRL_ENET_DISABLE (1 << 30)
+#define CLKCTRL_ENET_STATUS (1 << 29)
+#define CLKCTRL_ENET_BUSY_TIME (1 << 27)
+#define CLKCTRL_ENET_DIV_TIME_MASK (0x3f << 21)
+#define CLKCTRL_ENET_DIV_TIME_OFFSET 21
+#define CLKCTRL_ENET_TIME_SEL_MASK (0x3 << 19)
+#define CLKCTRL_ENET_TIME_SEL_OFFSET 19
+#define CLKCTRL_ENET_TIME_SEL_XTAL (0x0 << 19)
+#define CLKCTRL_ENET_TIME_SEL_PLL (0x1 << 19)
+#define CLKCTRL_ENET_TIME_SEL_RMII_CLK (0x2 << 19)
+#define CLKCTRL_ENET_TIME_SEL_UNDEFINED (0x3 << 19)
+#define CLKCTRL_ENET_CLK_OUT_EN (1 << 18)
+#define CLKCTRL_ENET_RESET_BY_SW_CHIP (1 << 17)
+#define CLKCTRL_ENET_RESET_BY_SW (1 << 16)
+
+#define CLKCTRL_HSADC_RESETB (1 << 30)
+#define CLKCTRL_HSADC_FREQDIV_MASK (0x3 << 28)
+#define CLKCTRL_HSADC_FREQDIV_OFFSET 28
+
+#define CLKCTRL_FLEXCAN_STOP_CAN0 (1 << 30)
+#define CLKCTRL_FLEXCAN_CAN0_STATUS (1 << 29)
+#define CLKCTRL_FLEXCAN_STOP_CAN1 (1 << 28)
+#define CLKCTRL_FLEXCAN_CAN1_STATUS (1 << 27)
+
+#define CLKCTRL_FRAC0_CLKGATEIO0 (1 << 31)
+#define CLKCTRL_FRAC0_IO0_STABLE (1 << 30)
+#define CLKCTRL_FRAC0_IO0FRAC_MASK (0x3f << 24)
+#define CLKCTRL_FRAC0_IO0FRAC_OFFSET 24
+#define CLKCTRL_FRAC0_CLKGATEIO1 (1 << 23)
+#define CLKCTRL_FRAC0_IO1_STABLE (1 << 22)
+#define CLKCTRL_FRAC0_IO1FRAC_MASK (0x3f << 16)
+#define CLKCTRL_FRAC0_IO1FRAC_OFFSET 16
+#define CLKCTRL_FRAC0_CLKGATEEMI (1 << 15)
+#define CLKCTRL_FRAC0_EMI_STABLE (1 << 14)
+#define CLKCTRL_FRAC0_EMIFRAC_MASK (0x3f << 8)
+#define CLKCTRL_FRAC0_EMIFRAC_OFFSET 8
+#define CLKCTRL_FRAC0_CLKGATECPU (1 << 7)
+#define CLKCTRL_FRAC0_CPU_STABLE (1 << 6)
+#define CLKCTRL_FRAC0_CPUFRAC_MASK 0x3f
+#define CLKCTRL_FRAC0_CPUFRAC_OFFSET 0
+
+#define CLKCTRL_FRAC1_CLKGATEGPMI (1 << 23)
+#define CLKCTRL_FRAC1_GPMI_STABLE (1 << 22)
+#define CLKCTRL_FRAC1_GPMIFRAC_MASK (0x3f << 16)
+#define CLKCTRL_FRAC1_GPMIFRAC_OFFSET 16
+#define CLKCTRL_FRAC1_CLKGATEHSADC (1 << 15)
+#define CLKCTRL_FRAC1_HSADC_STABLE (1 << 14)
+#define CLKCTRL_FRAC1_HSADCFRAC_MASK (0x3f << 8)
+#define CLKCTRL_FRAC1_HSADCFRAC_OFFSET 8
+#define CLKCTRL_FRAC1_CLKGATEPIX (1 << 7)
+#define CLKCTRL_FRAC1_PIX_STABLE (1 << 6)
+#define CLKCTRL_FRAC1_PIXFRAC_MASK 0x3f
+#define CLKCTRL_FRAC1_PIXFRAC_OFFSET 0
+
+#define CLKCTRL_CLKSEQ_BYPASS_CPU (1 << 18)
+#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF (1 << 14)
+#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF_BYPASS (0x1 << 14)
+#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF_PFD (0x0 << 14)
+#define CLKCTRL_CLKSEQ_BYPASS_ETM (1 << 8)
+#define CLKCTRL_CLKSEQ_BYPASS_EMI (1 << 7)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP3 (1 << 6)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP2 (1 << 5)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP1 (1 << 4)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP0 (1 << 3)
+#define CLKCTRL_CLKSEQ_BYPASS_GPMI (1 << 2)
+#define CLKCTRL_CLKSEQ_BYPASS_SAIF1 (1 << 1)
+#define CLKCTRL_CLKSEQ_BYPASS_SAIF0 (1 << 0)
+
+#define CLKCTRL_RESET_WDOG_POR_DISABLE (1 << 5)
+#define CLKCTRL_RESET_EXTERNAL_RESET_ENABLE (1 << 4)
+#define CLKCTRL_RESET_THERMAL_RESET_ENABLE (1 << 3)
+#define CLKCTRL_RESET_THERMAL_RESET_DEFAULT (1 << 2)
+#define CLKCTRL_RESET_CHIP (1 << 1)
+#define CLKCTRL_RESET_DIG (1 << 0)
+
+#define CLKCTRL_STATUS_CPU_LIMIT_MASK (0x3 << 30)
+#define CLKCTRL_STATUS_CPU_LIMIT_OFFSET 30
+
+#define CLKCTRL_VERSION_MAJOR_MASK (0xff << 24)
+#define CLKCTRL_VERSION_MAJOR_OFFSET 24
+#define CLKCTRL_VERSION_MINOR_MASK (0xff << 16)
+#define CLKCTRL_VERSION_MINOR_OFFSET 16
+#define CLKCTRL_VERSION_STEP_MASK 0xffff
+#define CLKCTRL_VERSION_STEP_OFFSET 0
+
+#endif /* __REGS_CLKCTRL_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-common.h b/arch/arm/include/asm/arch-mx28/regs-common.h
new file mode 100644
index 0000000..774cfa1
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-common.h
@@ -0,0 +1,66 @@
+/*
+ * Freescale i.MX28 Register Accessors
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_COMMON_H__
+#define __REGS_COMMON_H__
+
+/*
+ * The i.MX28 has interesting feature when it comes to register access. There
+ * are four kinds of access to one particular register. Those are:
+ *
+ * 1) Common read/write access. To use this mode, just write to the address of
+ * the register.
+ * 2) Set bits only access. To set bits, write which bits you want to set to the
+ * address of the register + 0x4.
+ * 3) Clear bits only access. To clear bits, write which bits you want to clear
+ * to the address of the register + 0x8.
+ * 4) Toggle bits only access. To toggle bits, write which bits you want to
+ * toggle to the address of the register + 0xc.
+ *
+ * IMPORTANT NOTE: Not all registers support accesses 2-4! Also, not all bits
+ * can be set/cleared by pure write as in access type 1, some need to be
+ * explicitly set/cleared by using access type 2-3.
+ *
+ * The following macros and structures allow the user to either access the
+ * register in all aforementioned modes (by accessing reg_name, reg_name_set,
+ * reg_name_clr, reg_name_tog) or pass the register structure further into
+ * various functions with correct type information (by accessing reg_name_reg).
+ *
+ */
+
+#define __mx28_reg(name) \
+ uint32_t name; \
+ uint32_t name##_set; \
+ uint32_t name##_clr; \
+ uint32_t name##_tog;
+
+struct mx28_register {
+ __mx28_reg(reg)
+};
+
+#define mx28_reg(name) \
+ union { \
+ struct { __mx28_reg(name) }; \
+ struct mx28_register name##_reg; \
+ };
+
+#endif /* __REGS_COMMON_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-power.h b/arch/arm/include/asm/arch-mx28/regs-power.h
new file mode 100644
index 0000000..a17514e
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-power.h
@@ -0,0 +1,409 @@
+/*
+ * Freescale i.MX28 Power Controller Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_POWER_H__
+#define __REGS_POWER_H__
+
+struct mx28_power_regs {
+ mx28_reg(hw_power_ctrl)
+ mx28_reg(hw_power_5vctrl)
+ mx28_reg(hw_power_minpwr)
+ mx28_reg(hw_power_charge)
+ uint32_t hw_power_vdddctrl;
+ uint32_t reserved_vddd[3];
+ uint32_t hw_power_vddactrl;
+ uint32_t reserved_vdda[3];
+ uint32_t hw_power_vddioctrl;
+ uint32_t reserved_vddio[3];
+ uint32_t hw_power_vddmemctrl;
+ uint32_t reserved_vddmem[3];
+ uint32_t hw_power_dcdc4p2;
+ uint32_t reserved_dcdc4p2[3];
+ uint32_t hw_power_misc;
+ uint32_t reserved_misc[3];
+ uint32_t hw_power_dclimits;
+ uint32_t reserved_dclimits[3];
+ mx28_reg(hw_power_loopctrl)
+ uint32_t hw_power_sts;
+ uint32_t reserved_sts[3];
+ mx28_reg(hw_power_speed)
+ uint32_t hw_power_battmonitor;
+ uint32_t reserved_battmonitor[3];
+
+ uint32_t reserved[4];
+
+ mx28_reg(hw_power_reset)
+ mx28_reg(hw_power_debug)
+ mx28_reg(hw_power_thermal)
+ mx28_reg(hw_power_usb1ctrl)
+ mx28_reg(hw_power_special)
+ mx28_reg(hw_power_version)
+ mx28_reg(hw_power_anaclkctrl)
+ mx28_reg(hw_power_refctrl)
+};
+
+#define POWER_CTRL_PSWITCH_MID_TRAN (1 << 27)
+#define POWER_CTRL_DCDC4P2_BO_IRQ (1 << 24)
+#define POWER_CTRL_ENIRQ_DCDC4P2_BO (1 << 23)
+#define POWER_CTRL_VDD5V_DROOP_IRQ (1 << 22)
+#define POWER_CTRL_ENIRQ_VDD5V_DROOP (1 << 21)
+#define POWER_CTRL_PSWITCH_IRQ (1 << 20)
+#define POWER_CTRL_PSWITCH_IRQ_SRC (1 << 19)
+#define POWER_CTRL_POLARITY_PSWITCH (1 << 18)
+#define POWER_CTRL_ENIRQ_PSWITCH (1 << 17)
+#define POWER_CTRL_POLARITY_DC_OK (1 << 16)
+#define POWER_CTRL_DC_OK_IRQ (1 << 15)
+#define POWER_CTRL_ENIRQ_DC_OK (1 << 14)
+#define POWER_CTRL_BATT_BO_IRQ (1 << 13)
+#define POWER_CTRL_ENIRQ_BATT_BO (1 << 12)
+#define POWER_CTRL_VDDIO_BO_IRQ (1 << 11)
+#define POWER_CTRL_ENIRQ_VDDIO_BO (1 << 10)
+#define POWER_CTRL_VDDA_BO_IRQ (1 << 9)
+#define POWER_CTRL_ENIRQ_VDDA_BO (1 << 8)
+#define POWER_CTRL_VDDD_BO_IRQ (1 << 7)
+#define POWER_CTRL_ENIRQ_VDDD_BO (1 << 6)
+#define POWER_CTRL_POLARITY_VBUSVALID (1 << 5)
+#define POWER_CTRL_VBUS_VALID_IRQ (1 << 4)
+#define POWER_CTRL_ENIRQ_VBUS_VALID (1 << 3)
+#define POWER_CTRL_POLARITY_VDD5V_GT_VDDIO (1 << 2)
+#define POWER_CTRL_VDD5V_GT_VDDIO_IRQ (1 << 1)
+#define POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO (1 << 0)
+
+#define POWER_5VCTRL_VBUSDROOP_TRSH_MASK (0x3 << 30)
+#define POWER_5VCTRL_VBUSDROOP_TRSH_OFFSET 30
+#define POWER_5VCTRL_VBUSDROOP_TRSH_4V3 (0x0 << 30)
+#define POWER_5VCTRL_VBUSDROOP_TRSH_4V4 (0x1 << 30)
+#define POWER_5VCTRL_VBUSDROOP_TRSH_4V5 (0x2 << 30)
+#define POWER_5VCTRL_VBUSDROOP_TRSH_4V7 (0x3 << 30)
+#define POWER_5VCTRL_HEADROOM_ADJ_MASK (0x7 << 24)
+#define POWER_5VCTRL_HEADROOM_ADJ_OFFSET 24
+#define POWER_5VCTRL_PWD_CHARGE_4P2_MASK (0x3 << 20)
+#define POWER_5VCTRL_PWD_CHARGE_4P2_OFFSET 20
+#define POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK (0x3f << 12)
+#define POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET 12
+#define POWER_5VCTRL_VBUSVALID_TRSH_MASK (0x7 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_OFFSET 8
+#define POWER_5VCTRL_VBUSVALID_TRSH_2V9 (0x0 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V0 (0x1 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V1 (0x2 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V2 (0x3 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V3 (0x4 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V4 (0x5 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V5 (0x6 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V6 (0x7 << 8)
+#define POWER_5VCTRL_PWDN_5VBRNOUT (1 << 7)
+#define POWER_5VCTRL_ENABLE_LINREG_ILIMIT (1 << 6)
+#define POWER_5VCTRL_DCDC_XFER (1 << 5)
+#define POWER_5VCTRL_VBUSVALID_5VDETECT (1 << 4)
+#define POWER_5VCTRL_VBUSVALID_TO_B (1 << 3)
+#define POWER_5VCTRL_ILIMIT_EQ_ZERO (1 << 2)
+#define POWER_5VCTRL_PWRUP_VBUS_CMPS (1 << 1)
+#define POWER_5VCTRL_ENABLE_DCDC (1 << 0)
+
+#define POWER_MINPWR_LOWPWR_4P2 (1 << 14)
+#define POWER_MINPWR_PWD_BO (1 << 12)
+#define POWER_MINPWR_USE_VDDXTAL_VBG (1 << 11)
+#define POWER_MINPWR_PWD_ANA_CMPS (1 << 10)
+#define POWER_MINPWR_ENABLE_OSC (1 << 9)
+#define POWER_MINPWR_SELECT_OSC (1 << 8)
+#define POWER_MINPWR_FBG_OFF (1 << 7)
+#define POWER_MINPWR_DOUBLE_FETS (1 << 6)
+#define POWER_MINPWR_HALFFETS (1 << 5)
+#define POWER_MINPWR_LESSANA_I (1 << 4)
+#define POWER_MINPWR_PWD_XTAL24 (1 << 3)
+#define POWER_MINPWR_DC_STOPCLK (1 << 2)
+#define POWER_MINPWR_EN_DC_PFM (1 << 1)
+#define POWER_MINPWR_DC_HALFCLK (1 << 0)
+
+#define POWER_CHARGE_ADJ_VOLT_MASK (0x7 << 24)
+#define POWER_CHARGE_ADJ_VOLT_OFFSET 24
+#define POWER_CHARGE_ADJ_VOLT_M025P (0x1 << 24)
+#define POWER_CHARGE_ADJ_VOLT_P050P (0x2 << 24)
+#define POWER_CHARGE_ADJ_VOLT_M075P (0x3 << 24)
+#define POWER_CHARGE_ADJ_VOLT_P025P (0x4 << 24)
+#define POWER_CHARGE_ADJ_VOLT_M050P (0x5 << 24)
+#define POWER_CHARGE_ADJ_VOLT_P075P (0x6 << 24)
+#define POWER_CHARGE_ADJ_VOLT_M100P (0x7 << 24)
+#define POWER_CHARGE_ENABLE_LOAD (1 << 22)
+#define POWER_CHARGE_ENABLE_FAULT_DETECT (1 << 20)
+#define POWER_CHARGE_CHRG_STS_OFF (1 << 19)
+#define POWER_CHARGE_LIION_4P1 (1 << 18)
+#define POWER_CHARGE_PWD_BATTCHRG (1 << 16)
+#define POWER_CHARGE_ENABLE_CHARGER_USB1 (1 << 13)
+#define POWER_CHARGE_ENABLE_CHARGER_USB0 (1 << 12)
+#define POWER_CHARGE_STOP_ILIMIT_MASK (0xf << 8)
+#define POWER_CHARGE_STOP_ILIMIT_OFFSET 8
+#define POWER_CHARGE_STOP_ILIMIT_10MA (0x1 << 8)
+#define POWER_CHARGE_STOP_ILIMIT_20MA (0x2 << 8)
+#define POWER_CHARGE_STOP_ILIMIT_50MA (0x4 << 8)
+#define POWER_CHARGE_STOP_ILIMIT_100MA (0x8 << 8)
+#define POWER_CHARGE_BATTCHRG_I_MASK 0x3f
+#define POWER_CHARGE_BATTCHRG_I_OFFSET 0
+#define POWER_CHARGE_BATTCHRG_I_10MA 0x01
+#define POWER_CHARGE_BATTCHRG_I_20MA 0x02
+#define POWER_CHARGE_BATTCHRG_I_50MA 0x04
+#define POWER_CHARGE_BATTCHRG_I_100MA 0x08
+#define POWER_CHARGE_BATTCHRG_I_200MA 0x10
+#define POWER_CHARGE_BATTCHRG_I_400MA 0x20
+
+#define POWER_VDDDCTRL_ADJTN_MASK (0xf << 28)
+#define POWER_VDDDCTRL_ADJTN_OFFSET 28
+#define POWER_VDDDCTRL_PWDN_BRNOUT (1 << 23)
+#define POWER_VDDDCTRL_DISABLE_STEPPING (1 << 22)
+#define POWER_VDDDCTRL_ENABLE_LINREG (1 << 21)
+#define POWER_VDDDCTRL_DISABLE_FET (1 << 20)
+#define POWER_VDDDCTRL_LINREG_OFFSET_MASK (0x3 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_OFFSET 16
+#define POWER_VDDDCTRL_LINREG_OFFSET_0STEPS (0x0 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 16)
+#define POWER_VDDDCTRL_BO_OFFSET_MASK (0x7 << 8)
+#define POWER_VDDDCTRL_BO_OFFSET_OFFSET 8
+#define POWER_VDDDCTRL_TRG_MASK 0x1f
+#define POWER_VDDDCTRL_TRG_OFFSET 0
+
+#define POWER_VDDACTRL_PWDN_BRNOUT (1 << 19)
+#define POWER_VDDACTRL_DISABLE_STEPPING (1 << 18)
+#define POWER_VDDACTRL_ENABLE_LINREG (1 << 17)
+#define POWER_VDDACTRL_DISABLE_FET (1 << 16)
+#define POWER_VDDACTRL_LINREG_OFFSET_MASK (0x3 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_OFFSET 12
+#define POWER_VDDACTRL_LINREG_OFFSET_0STEPS (0x0 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12)
+#define POWER_VDDACTRL_BO_OFFSET_MASK (0x7 << 8)
+#define POWER_VDDACTRL_BO_OFFSET_OFFSET 8
+#define POWER_VDDACTRL_TRG_MASK 0x1f
+#define POWER_VDDACTRL_TRG_OFFSET 0
+
+#define POWER_VDDIOCTRL_ADJTN_MASK (0xf << 20)
+#define POWER_VDDIOCTRL_ADJTN_OFFSET 20
+#define POWER_VDDIOCTRL_PWDN_BRNOUT (1 << 18)
+#define POWER_VDDIOCTRL_DISABLE_STEPPING (1 << 17)
+#define POWER_VDDIOCTRL_DISABLE_FET (1 << 16)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_MASK (0x3 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_OFFSET 12
+#define POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS (0x0 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12)
+#define POWER_VDDIOCTRL_BO_OFFSET_MASK (0x7 << 8)
+#define POWER_VDDIOCTRL_BO_OFFSET_OFFSET 8
+#define POWER_VDDIOCTRL_TRG_MASK 0x1f
+#define POWER_VDDIOCTRL_TRG_OFFSET 0
+
+#define POWER_VDDMEMCTRL_PULLDOWN_ACTIVE (1 << 10)
+#define POWER_VDDMEMCTRL_ENABLE_ILIMIT (1 << 9)
+#define POWER_VDDMEMCTRL_ENABLE_LINREG (1 << 8)
+#define POWER_VDDMEMCTRL_BO_OFFSET_MASK (0x7 << 5)
+#define POWER_VDDMEMCTRL_BO_OFFSET_OFFSET 5
+#define POWER_VDDMEMCTRL_TRG_MASK 0x1f
+#define POWER_VDDMEMCTRL_TRG_OFFSET 0
+
+#define POWER_DCDC4P2_DROPOUT_CTRL_MASK (0xf << 28)
+#define POWER_DCDC4P2_DROPOUT_CTRL_OFFSET 28
+#define POWER_DCDC4P2_DROPOUT_CTRL_200MV (0x3 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_100MV (0x2 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_50MV (0x1 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_25MV (0x0 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2 (0x0 << 28)
+#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2_LT_BATT (0x1 << 28)
+#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL (0x2 << 28)
+#define POWER_DCDC4P2_ISTEAL_THRESH_MASK (0x3 << 24)
+#define POWER_DCDC4P2_ISTEAL_THRESH_OFFSET 24
+#define POWER_DCDC4P2_ENABLE_4P2 (1 << 23)
+#define POWER_DCDC4P2_ENABLE_DCDC (1 << 22)
+#define POWER_DCDC4P2_HYST_DIR (1 << 21)
+#define POWER_DCDC4P2_HYST_THRESH (1 << 20)
+#define POWER_DCDC4P2_TRG_MASK (0x7 << 16)
+#define POWER_DCDC4P2_TRG_OFFSET 16
+#define POWER_DCDC4P2_TRG_4V2 (0x0 << 16)
+#define POWER_DCDC4P2_TRG_4V1 (0x1 << 16)
+#define POWER_DCDC4P2_TRG_4V0 (0x2 << 16)
+#define POWER_DCDC4P2_TRG_3V9 (0x3 << 16)
+#define POWER_DCDC4P2_TRG_BATT (0x4 << 16)
+#define POWER_DCDC4P2_BO_MASK (0x1f << 8)
+#define POWER_DCDC4P2_BO_OFFSET 8
+#define POWER_DCDC4P2_CMPTRIP_MASK 0x1f
+#define POWER_DCDC4P2_CMPTRIP_OFFSET 0
+
+#define POWER_MISC_FREQSEL_MASK (0x7 << 4)
+#define POWER_MISC_FREQSEL_OFFSET 4
+#define POWER_MISC_FREQSEL_20MHZ (0x1 << 4)
+#define POWER_MISC_FREQSEL_24MHZ (0x2 << 4)
+#define POWER_MISC_FREQSEL_19MHZ (0x3 << 4)
+#define POWER_MISC_FREQSEL_14MHZ (0x4 << 4)
+#define POWER_MISC_FREQSEL_18MHZ (0x5 << 4)
+#define POWER_MISC_FREQSEL_21MHZ (0x6 << 4)
+#define POWER_MISC_FREQSEL_17MHZ (0x7 << 4)
+#define POWER_MISC_DISABLE_FET_BO_LOGIC (1 << 3)
+#define POWER_MISC_DELAY_TIMING (1 << 2)
+#define POWER_MISC_TEST (1 << 1)
+#define POWER_MISC_SEL_PLLCLK (1 << 0)
+
+#define POWER_DCLIMITS_POSLIMIT_BUCK_MASK (0x7f << 8)
+#define POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET 8
+#define POWER_DCLIMITS_NEGLIMIT_MASK 0x7f
+#define POWER_DCLIMITS_NETLIMIT_OFFSET 0
+
+#define POWER_LOOPCTRL_TOGGLE_DIF (1 << 20)
+#define POWER_LOOPCTRL_HYST_SIGN (1 << 19)
+#define POWER_LOOPCTRL_EN_CM_HYST (1 << 18)
+#define POWER_LOOPCTRL_EN_DF_HYST (1 << 17)
+#define POWER_LOOPCTRL_CM_HYST_THRESH (1 << 16)
+#define POWER_LOOPCTRL_DF_HYST_THRESH (1 << 15)
+#define POWER_LOOPCTRL_RCSCALE_THRESH (1 << 14)
+#define POWER_LOOPCTRL_EN_RCSCALE_MASK (0x3 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_OFFSET 12
+#define POWER_LOOPCTRL_EN_RCSCALE_DIS (0x0 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_2X (0x1 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_4X (0x2 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_8X (0x3 << 12)
+#define POWER_LOOPCTRL_DC_FF_MASK (0x7 << 8)
+#define POWER_LOOPCTRL_DC_FF_OFFSET 8
+#define POWER_LOOPCTRL_DC_R_MASK (0xf << 4)
+#define POWER_LOOPCTRL_DC_R_OFFSET 4
+#define POWER_LOOPCTRL_DC_C_MASK 0x3
+#define POWER_LOOPCTRL_DC_C_OFFSET 0
+#define POWER_LOOPCTRL_DC_C_MAX 0x0
+#define POWER_LOOPCTRL_DC_C_2X 0x1
+#define POWER_LOOPCTRL_DC_C_4X 0x2
+#define POWER_LOOPCTRL_DC_C_MIN 0x3
+
+#define POWER_STS_PWRUP_SOURCE_MASK (0x3f << 24)
+#define POWER_STS_PWRUP_SOURCE_OFFSET 24
+#define POWER_STS_PWRUP_SOURCE_5V (0x20 << 24)
+#define POWER_STS_PWRUP_SOURCE_RTC (0x10 << 24)
+#define POWER_STS_PWRUP_SOURCE_PSWITCH_HIGH (0x02 << 24)
+#define POWER_STS_PWRUP_SOURCE_PSWITCH_MID (0x01 << 24)
+#define POWER_STS_PSWITCH_MASK (0x3 << 20)
+#define POWER_STS_PSWITCH_OFFSET 20
+#define POWER_STS_THERMAL_WARNING (1 << 19)
+#define POWER_STS_VDDMEM_BO (1 << 18)
+#define POWER_STS_AVALID0_STATUS (1 << 17)
+#define POWER_STS_BVALID0_STATUS (1 << 16)
+#define POWER_STS_VBUSVALID0_STATUS (1 << 15)
+#define POWER_STS_SESSEND0_STATUS (1 << 14)
+#define POWER_STS_BATT_BO (1 << 13)
+#define POWER_STS_VDD5V_FAULT (1 << 12)
+#define POWER_STS_CHRGSTS (1 << 11)
+#define POWER_STS_DCDC_4P2_BO (1 << 10)
+#define POWER_STS_DC_OK (1 << 9)
+#define POWER_STS_VDDIO_BO (1 << 8)
+#define POWER_STS_VDDA_BO (1 << 7)
+#define POWER_STS_VDDD_BO (1 << 6)
+#define POWER_STS_VDD5V_GT_VDDIO (1 << 5)
+#define POWER_STS_VDD5V_DROOP (1 << 4)
+#define POWER_STS_AVALID0 (1 << 3)
+#define POWER_STS_BVALID0 (1 << 2)
+#define POWER_STS_VBUSVALID0 (1 << 1)
+#define POWER_STS_SESSEND0 (1 << 0)
+
+#define POWER_SPEED_STATUS_MASK (0xffff << 8)
+#define POWER_SPEED_STATUS_OFFSET 8
+#define POWER_SPEED_STATUS_SEL_MASK (0x3 << 6)
+#define POWER_SPEED_STATUS_SEL_OFFSET 6
+#define POWER_SPEED_STATUS_SEL_DCDC_STAT (0x0 << 6)
+#define POWER_SPEED_STATUS_SEL_CORE_STAT (0x1 << 6)
+#define POWER_SPEED_STATUS_SEL_ARM_STAT (0x2 << 6)
+#define POWER_SPEED_CTRL_MASK 0x3
+#define POWER_SPEED_CTRL_OFFSET 0
+#define POWER_SPEED_CTRL_SS_OFF 0x0
+#define POWER_SPEED_CTRL_SS_ON 0x1
+#define POWER_SPEED_CTRL_SS_ENABLE 0x3
+
+#define POWER_BATTMONITOR_BATT_VAL_MASK (0x3ff << 16)
+#define POWER_BATTMONITOR_BATT_VAL_OFFSET 16
+#define POWER_BATTMONITOR_PWDN_BATTBRNOUT_5VDETECT_EN (1 << 11)
+#define POWER_BATTMONITOR_EN_BATADJ (1 << 10)
+#define POWER_BATTMONITOR_PWDN_BATTBRNOUT (1 << 9)
+#define POWER_BATTMONITOR_BRWNOUT_PWD (1 << 8)
+#define POWER_BATTMONITOR_BRWNOUT_LVL_MASK 0x1f
+#define POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET 0
+
+#define POWER_RESET_UNLOCK_MASK (0xffff << 16)
+#define POWER_RESET_UNLOCK_OFFSET 16
+#define POWER_RESET_UNLOCK_KEY (0x3e77 << 16)
+#define POWER_RESET_FASTFALL_PSWITCH_OFF (1 << 2)
+#define POWER_RESET_PWD_OFF (1 << 1)
+#define POWER_RESET_PWD (1 << 0)
+
+#define POWER_DEBUG_VBUSVALIDPIOLOCK (1 << 3)
+#define POWER_DEBUG_AVALIDPIOLOCK (1 << 2)
+#define POWER_DEBUG_BVALIDPIOLOCK (1 << 1)
+#define POWER_DEBUG_SESSENDPIOLOCK (1 << 0)
+
+#define POWER_THERMAL_TEST (1 << 8)
+#define POWER_THERMAL_PWD (1 << 7)
+#define POWER_THERMAL_LOW_POWER (1 << 6)
+#define POWER_THERMAL_OFFSET_ADJ_MASK (0x3 << 4)
+#define POWER_THERMAL_OFFSET_ADJ_OFFSET 4
+#define POWER_THERMAL_OFFSET_ADJ_ENABLE (1 << 3)
+#define POWER_THERMAL_TEMP_THRESHOLD_MASK 0x7
+#define POWER_THERMAL_TEMP_THRESHOLD_OFFSET 0
+
+#define POWER_USB1CTRL_AVALID1 (1 << 3)
+#define POWER_USB1CTRL_BVALID1 (1 << 2)
+#define POWER_USB1CTRL_VBUSVALID1 (1 << 1)
+#define POWER_USB1CTRL_SESSEND1 (1 << 0)
+
+#define POWER_SPECIAL_TEST_MASK 0xffffffff
+#define POWER_SPECIAL_TEST_OFFSET 0
+
+#define POWER_VERSION_MAJOR_MASK (0xff << 24)
+#define POWER_VERSION_MAJOR_OFFSET 24
+#define POWER_VERSION_MINOR_MASK (0xff << 16)
+#define POWER_VERSION_MINOR_OFFSET 16
+#define POWER_VERSION_STEP_MASK 0xffff
+#define POWER_VERSION_STEP_OFFSET 0
+
+#define POWER_ANACLKCTRL_CLKGATE_0 (1 << 31)
+#define POWER_ANACLKCTRL_OUTDIV_MASK (0x7 << 28)
+#define POWER_ANACLKCTRL_OUTDIV_OFFSET 28
+#define POWER_ANACLKCTRL_INVERT_OUTCLK (1 << 27)
+#define POWER_ANACLKCTRL_CLKGATE_I (1 << 26)
+#define POWER_ANACLKCTRL_DITHER_OFF (1 << 10)
+#define POWER_ANACLKCTRL_SLOW_DITHER (1 << 9)
+#define POWER_ANACLKCTRL_INVERT_INCLK (1 << 8)
+#define POWER_ANACLKCTRL_INCLK_SHIFT_MASK (0x3 << 4)
+#define POWER_ANACLKCTRL_INCLK_SHIFT_OFFSET 4
+#define POWER_ANACLKCTRL_INDIV_MASK 0x7
+#define POWER_ANACLKCTRL_INDIV_OFFSET 0
+
+#define POWER_REFCTRL_FASTSETTLING (1 << 26)
+#define POWER_REFCTRL_RAISE_REF (1 << 25)
+#define POWER_REFCTRL_XTAL_BGR_BIAS (1 << 24)
+#define POWER_REFCTRL_VBG_ADJ_MASK (0x7 << 20)
+#define POWER_REFCTRL_VBG_ADJ_OFFSET 20
+#define POWER_REFCTRL_LOW_PWR (1 << 19)
+#define POWER_REFCTRL_BIAS_CTRL_MASK (0x3 << 16)
+#define POWER_REFCTRL_BIAS_CTRL_OFFSET 16
+#define POWER_REFCTRL_VDDXTAL_TO_VDDD (1 << 14)
+#define POWER_REFCTRL_ADJ_ANA (1 << 13)
+#define POWER_REFCTRL_ADJ_VAG (1 << 12)
+#define POWER_REFCTRL_ANA_REFVAL_MASK (0xf << 8)
+#define POWER_REFCTRL_ANA_REFVAL_OFFSET 8
+#define POWER_REFCTRL_VAG_VAL_MASK (0xf << 4)
+#define POWER_REFCTRL_VAG_VAL_OFFSET 4
+
+#endif /* __REGS_POWER_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-ssp.h b/arch/arm/include/asm/arch-mx28/regs-ssp.h
new file mode 100644
index 0000000..6a275c0
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-ssp.h
@@ -0,0 +1,345 @@
+/*
+ * Freescale i.MX28 SSP Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_SSP_H__
+#define __REGS_SSP_H__
+
+struct mx28_ssp_regs {
+ mx28_reg(hw_ssp_ctrl0)
+ mx28_reg(hw_ssp_cmd0)
+ mx28_reg(hw_ssp_cmd1)
+ mx28_reg(hw_ssp_xfer_size)
+ mx28_reg(hw_ssp_block_size)
+ mx28_reg(hw_ssp_compref)
+ mx28_reg(hw_ssp_compmask)
+ mx28_reg(hw_ssp_timing)
+ mx28_reg(hw_ssp_ctrl1)
+ mx28_reg(hw_ssp_data)
+ mx28_reg(hw_ssp_sdresp0)
+ mx28_reg(hw_ssp_sdresp1)
+ mx28_reg(hw_ssp_sdresp2)
+ mx28_reg(hw_ssp_sdresp3)
+ mx28_reg(hw_ssp_ddr_ctrl)
+ mx28_reg(hw_ssp_dll_ctrl)
+ mx28_reg(hw_ssp_status)
+ mx28_reg(hw_ssp_dll_sts)
+ mx28_reg(hw_ssp_debug)
+ mx28_reg(hw_ssp_version)
+};
+
+#define SSP_CTRL0_SFTRST (1 << 31)
+#define SSP_CTRL0_CLKGATE (1 << 30)
+#define SSP_CTRL0_RUN (1 << 29)
+#define SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
+#define SSP_CTRL0_LOCK_CS (1 << 27)
+#define SSP_CTRL0_IGNORE_CRC (1 << 26)
+#define SSP_CTRL0_READ (1 << 25)
+#define SSP_CTRL0_DATA_XFER (1 << 24)
+#define SSP_CTRL0_BUS_WIDTH_MASK (0x3 << 22)
+#define SSP_CTRL0_BUS_WIDTH_OFFSET 22
+#define SSP_CTRL0_BUS_WIDTH_ONE_BIT (0x0 << 22)
+#define SSP_CTRL0_BUS_WIDTH_FOUR_BIT (0x1 << 22)
+#define SSP_CTRL0_BUS_WIDTH_EIGHT_BIT (0x2 << 22)
+#define SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
+#define SSP_CTRL0_WAIT_FOR_CMD (1 << 20)
+#define SSP_CTRL0_LONG_RESP (1 << 19)
+#define SSP_CTRL0_CHECK_RESP (1 << 18)
+#define SSP_CTRL0_GET_RESP (1 << 17)
+#define SSP_CTRL0_ENABLE (1 << 16)
+
+#define SSP_CMD0_SOFT_TERMINATE (1 << 26)
+#define SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
+#define SSP_CMD0_PRIM_BOOT_OP_EN (1 << 24)
+#define SSP_CMD0_BOOT_ACK_EN (1 << 23)
+#define SSP_CMD0_SLOW_CLKING_EN (1 << 22)
+#define SSP_CMD0_CONT_CLKING_EN (1 << 21)
+#define SSP_CMD0_APPEND_8CYC (1 << 20)
+#define SSP_CMD0_CMD_MASK 0xff
+#define SSP_CMD0_CMD_OFFSET 0
+#define SSP_CMD0_CMD_MMC_GO_IDLE_STATE 0x00
+#define SSP_CMD0_CMD_MMC_SEND_OP_COND 0x01
+#define SSP_CMD0_CMD_MMC_ALL_SEND_CID 0x02
+#define SSP_CMD0_CMD_MMC_SET_RELATIVE_ADDR 0x03
+#define SSP_CMD0_CMD_MMC_SET_DSR 0x04
+#define SSP_CMD0_CMD_MMC_RESERVED_5 0x05
+#define SSP_CMD0_CMD_MMC_SWITCH 0x06
+#define SSP_CMD0_CMD_MMC_SELECT_DESELECT_CARD 0x07
+#define SSP_CMD0_CMD_MMC_SEND_EXT_CSD 0x08
+#define SSP_CMD0_CMD_MMC_SEND_CSD 0x09
+#define SSP_CMD0_CMD_MMC_SEND_CID 0x0a
+#define SSP_CMD0_CMD_MMC_READ_DAT_UNTIL_STOP 0x0b
+#define SSP_CMD0_CMD_MMC_STOP_TRANSMISSION 0x0c
+#define SSP_CMD0_CMD_MMC_SEND_STATUS 0x0d
+#define SSP_CMD0_CMD_MMC_BUSTEST_R 0x0e
+#define SSP_CMD0_CMD_MMC_GO_INACTIVE_STATE 0x0f
+#define SSP_CMD0_CMD_MMC_SET_BLOCKLEN 0x10
+#define SSP_CMD0_CMD_MMC_READ_SINGLE_BLOCK 0x11
+#define SSP_CMD0_CMD_MMC_READ_MULTIPLE_BLOCK 0x12
+#define SSP_CMD0_CMD_MMC_BUSTEST_W 0x13
+#define SSP_CMD0_CMD_MMC_WRITE_DAT_UNTIL_STOP 0x14
+#define SSP_CMD0_CMD_MMC_SET_BLOCK_COUNT 0x17
+#define SSP_CMD0_CMD_MMC_WRITE_BLOCK 0x18
+#define SSP_CMD0_CMD_MMC_WRITE_MULTIPLE_BLOCK 0x19
+#define SSP_CMD0_CMD_MMC_PROGRAM_CID 0x1a
+#define SSP_CMD0_CMD_MMC_PROGRAM_CSD 0x1b
+#define SSP_CMD0_CMD_MMC_SET_WRITE_PROT 0x1c
+#define SSP_CMD0_CMD_MMC_CLR_WRITE_PROT 0x1d
+#define SSP_CMD0_CMD_MMC_SEND_WRITE_PROT 0x1e
+#define SSP_CMD0_CMD_MMC_ERASE_GROUP_START 0x23
+#define SSP_CMD0_CMD_MMC_ERASE_GROUP_END 0x24
+#define SSP_CMD0_CMD_MMC_ERASE 0x26
+#define SSP_CMD0_CMD_MMC_FAST_IO 0x27
+#define SSP_CMD0_CMD_MMC_GO_IRQ_STATE 0x28
+#define SSP_CMD0_CMD_MMC_LOCK_UNLOCK 0x2a
+#define SSP_CMD0_CMD_MMC_APP_CMD 0x37
+#define SSP_CMD0_CMD_MMC_GEN_CMD 0x38
+#define SSP_CMD0_CMD_SD_GO_IDLE_STATE 0x00
+#define SSP_CMD0_CMD_SD_ALL_SEND_CID 0x02
+#define SSP_CMD0_CMD_SD_SEND_RELATIVE_ADDR 0x03
+#define SSP_CMD0_CMD_SD_SET_DSR 0x04
+#define SSP_CMD0_CMD_SD_IO_SEND_OP_COND 0x05
+#define SSP_CMD0_CMD_SD_SELECT_DESELECT_CARD 0x07
+#define SSP_CMD0_CMD_SD_SEND_CSD 0x09
+#define SSP_CMD0_CMD_SD_SEND_CID 0x0a
+#define SSP_CMD0_CMD_SD_STOP_TRANSMISSION 0x0c
+#define SSP_CMD0_CMD_SD_SEND_STATUS 0x0d
+#define SSP_CMD0_CMD_SD_GO_INACTIVE_STATE 0x0f
+#define SSP_CMD0_CMD_SD_SET_BLOCKLEN 0x10
+#define SSP_CMD0_CMD_SD_READ_SINGLE_BLOCK 0x11
+#define SSP_CMD0_CMD_SD_READ_MULTIPLE_BLOCK 0x12
+#define SSP_CMD0_CMD_SD_WRITE_BLOCK 0x18
+#define SSP_CMD0_CMD_SD_WRITE_MULTIPLE_BLOCK 0x19
+#define SSP_CMD0_CMD_SD_PROGRAM_CSD 0x1b
+#define SSP_CMD0_CMD_SD_SET_WRITE_PROT 0x1c
+#define SSP_CMD0_CMD_SD_CLR_WRITE_PROT 0x1d
+#define SSP_CMD0_CMD_SD_SEND_WRITE_PROT 0x1e
+#define SSP_CMD0_CMD_SD_ERASE_WR_BLK_START 0x20
+#define SSP_CMD0_CMD_SD_ERASE_WR_BLK_END 0x21
+#define SSP_CMD0_CMD_SD_ERASE_GROUP_START 0x23
+#define SSP_CMD0_CMD_SD_ERASE_GROUP_END 0x24
+#define SSP_CMD0_CMD_SD_ERASE 0x26
+#define SSP_CMD0_CMD_SD_LOCK_UNLOCK 0x2a
+#define SSP_CMD0_CMD_SD_IO_RW_DIRECT 0x34
+#define SSP_CMD0_CMD_SD_IO_RW_EXTENDED 0x35
+#define SSP_CMD0_CMD_SD_APP_CMD 0x37
+#define SSP_CMD0_CMD_SD_GEN_CMD 0x38
+
+#define SSP_CMD1_CMD_ARG_MASK 0xffffffff
+#define SSP_CMD1_CMD_ARG_OFFSET 0
+
+#define SSP_XFER_SIZE_XFER_COUNT_MASK 0xffffffff
+#define SSP_XFER_SIZE_XFER_COUNT_OFFSET 0
+
+#define SSP_BLOCK_SIZE_BLOCK_COUNT_MASK (0xffffff << 4)
+#define SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET 4
+#define SSP_BLOCK_SIZE_BLOCK_SIZE_MASK 0xf
+#define SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET 0
+
+#define SSP_COMPREF_REFERENCE_MASK 0xffffffff
+#define SSP_COMPREF_REFERENCE_OFFSET 0
+
+#define SSP_COMPMASK_MASK_MASK 0xffffffff
+#define SSP_COMPMASK_MASK_OFFSET 0
+
+#define SSP_TIMING_TIMEOUT_MASK (0xffff << 16)
+#define SSP_TIMING_TIMEOUT_OFFSET 16
+#define SSP_TIMING_CLOCK_DIVIDE_MASK (0xff << 8)
+#define SSP_TIMING_CLOCK_DIVIDE_OFFSET 8
+#define SSP_TIMING_CLOCK_RATE_MASK 0xff
+#define SSP_TIMING_CLOCK_RATE_OFFSET 0
+
+#define SSP_CTRL1_SDIO_IRQ (1 << 31)
+#define SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
+#define SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
+#define SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
+#define SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
+#define SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
+#define SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
+#define SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
+#define SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
+#define SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
+#define SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
+#define SSP_CTRL1_FIFO_UNDERRUN_EN (1 << 20)
+#define SSP_CTRL1_CEATA_CCS_ERR_IRQ (1 << 19)
+#define SSP_CTRL1_CEATA_CCS_ERR_IRQ_EN (1 << 18)
+#define SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
+#define SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
+#define SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
+#define SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
+#define SSP_CTRL1_DMA_ENABLE (1 << 13)
+#define SSP_CTRL1_CEATA_CCS_ERR_EN (1 << 12)
+#define SSP_CTRL1_SLAVE_OUT_DISABLE (1 << 11)
+#define SSP_CTRL1_PHASE (1 << 10)
+#define SSP_CTRL1_POLARITY (1 << 9)
+#define SSP_CTRL1_SLAVE_MODE (1 << 8)
+#define SSP_CTRL1_WORD_LENGTH_MASK (0xf << 4)
+#define SSP_CTRL1_WORD_LENGTH_OFFSET 4
+#define SSP_CTRL1_WORD_LENGTH_RESERVED0 (0x0 << 4)
+#define SSP_CTRL1_WORD_LENGTH_RESERVED1 (0x1 << 4)
+#define SSP_CTRL1_WORD_LENGTH_RESERVED2 (0x2 << 4)
+#define SSP_CTRL1_WORD_LENGTH_FOUR_BITS (0x3 << 4)
+#define SSP_CTRL1_WORD_LENGTH_EIGHT_BITS (0x7 << 4)
+#define SSP_CTRL1_WORD_LENGTH_SIXTEEN_BITS (0xf << 4)
+#define SSP_CTRL1_SSP_MODE_MASK 0xf
+#define SSP_CTRL1_SSP_MODE_OFFSET 0
+#define SSP_CTRL1_SSP_MODE_SPI 0x0
+#define SSP_CTRL1_SSP_MODE_SSI 0x1
+#define SSP_CTRL1_SSP_MODE_SD_MMC 0x3
+#define SSP_CTRL1_SSP_MODE_MS 0x4
+
+#define SSP_DATA_DATA_MASK 0xffffffff
+#define SSP_DATA_DATA_OFFSET 0
+
+#define SSP_SDRESP0_RESP0_MASK 0xffffffff
+#define SSP_SDRESP0_RESP0_OFFSET 0
+
+#define SSP_SDRESP1_RESP1_MASK 0xffffffff
+#define SSP_SDRESP1_RESP1_OFFSET 0
+
+#define SSP_SDRESP2_RESP2_MASK 0xffffffff
+#define SSP_SDRESP2_RESP2_OFFSET 0
+
+#define SSP_SDRESP3_RESP3_MASK 0xffffffff
+#define SSP_SDRESP3_RESP3_OFFSET 0
+
+#define SSP_DDR_CTRL_DMA_BURST_TYPE_MASK (0x3 << 30)
+#define SSP_DDR_CTRL_DMA_BURST_TYPE_OFFSET 30
+#define SSP_DDR_CTRL_NIBBLE_POS (1 << 1)
+#define SSP_DDR_CTRL_TXCLK_DELAY_TYPE (1 << 0)
+
+#define SSP_DLL_CTRL_REF_UPDATE_INT_MASK (0xf << 28)
+#define SSP_DLL_CTRL_REF_UPDATE_INT_OFFSET 28
+#define SSP_DLL_CTRL_SLV_UPDATE_INT_MASK (0xff << 20)
+#define SSP_DLL_CTRL_SLV_UPDATE_INT_OFFSET 20
+#define SSP_DLL_CTRL_SLV_OVERRIDE_VAL_MASK (0x3f << 10)
+#define SSP_DLL_CTRL_SLV_OVERRIDE_VAL_OFFSET 10
+#define SSP_DLL_CTRL_SLV_OVERRIDE (1 << 9)
+#define SSP_DLL_CTRL_GATE_UPDATE (1 << 7)
+#define SSP_DLL_CTRL_SLV_DLY_TARGET_MASK (0xf << 3)
+#define SSP_DLL_CTRL_SLV_DLY_TARGET_OFFSET 3
+#define SSP_DLL_CTRL_SLV_FORCE_UPD (1 << 2)
+#define SSP_DLL_CTRL_RESET (1 << 1)
+#define SSP_DLL_CTRL_ENABLE (1 << 0)
+
+#define SSP_STATUS_PRESENT (1 << 31)
+#define SSP_STATUS_MS_PRESENT (1 << 30)
+#define SSP_STATUS_SD_PRESENT (1 << 29)
+#define SSP_STATUS_CARD_DETECT (1 << 28)
+#define SSP_STATUS_DMABURST (1 << 22)
+#define SSP_STATUS_DMASENSE (1 << 21)
+#define SSP_STATUS_DMATERM (1 << 20)
+#define SSP_STATUS_DMAREQ (1 << 19)
+#define SSP_STATUS_DMAEND (1 << 18)
+#define SSP_STATUS_SDIO_IRQ (1 << 17)
+#define SSP_STATUS_RESP_CRC_ERR (1 << 16)
+#define SSP_STATUS_RESP_ERR (1 << 15)
+#define SSP_STATUS_RESP_TIMEOUT (1 << 14)
+#define SSP_STATUS_DATA_CRC_ERR (1 << 13)
+#define SSP_STATUS_TIMEOUT (1 << 12)
+#define SSP_STATUS_RECV_TIMEOUT_STAT (1 << 11)
+#define SSP_STATUS_CEATA_CCS_ERR (1 << 10)
+#define SSP_STATUS_FIFO_OVRFLW (1 << 9)
+#define SSP_STATUS_FIFO_FULL (1 << 8)
+#define SSP_STATUS_FIFO_EMPTY (1 << 5)
+#define SSP_STATUS_FIFO_UNDRFLW (1 << 4)
+#define SSP_STATUS_CMD_BUSY (1 << 3)
+#define SSP_STATUS_DATA_BUSY (1 << 2)
+#define SSP_STATUS_BUSY (1 << 0)
+
+#define SSP_DLL_STS_REF_SEL_MASK (0x3f << 8)
+#define SSP_DLL_STS_REF_SEL_OFFSET 8
+#define SSP_DLL_STS_SLV_SEL_MASK (0x3f << 2)
+#define SSP_DLL_STS_SLV_SEL_OFFSET 2
+#define SSP_DLL_STS_REF_LOCK (1 << 1)
+#define SSP_DLL_STS_SLV_LOCK (1 << 0)
+
+#define SSP_DEBUG_DATACRC_ERR_MASK (0xf << 28)
+#define SSP_DEBUG_DATACRC_ERR_OFFSET 28
+#define SSP_DEBUG_DATA_STALL (1 << 27)
+#define SSP_DEBUG_DAT_SM_MASK (0x7 << 24)
+#define SSP_DEBUG_DAT_SM_OFFSET 24
+#define SSP_DEBUG_DAT_SM_DSM_IDLE (0x0 << 24)
+#define SSP_DEBUG_DAT_SM_DSM_WORD (0x2 << 24)
+#define SSP_DEBUG_DAT_SM_DSM_CRC1 (0x3 << 24)
+#define SSP_DEBUG_DAT_SM_DSM_CRC2 (0x4 << 24)
+#define SSP_DEBUG_DAT_SM_DSM_END (0x5 << 24)
+#define SSP_DEBUG_MSTK_SM_MASK (0xf << 20)
+#define SSP_DEBUG_MSTK_SM_OFFSET 20
+#define SSP_DEBUG_MSTK_SM_MSTK_IDLE (0x0 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_CKON (0x1 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_BS1 (0x2 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_TPC (0x3 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_BS2 (0x4 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_HDSHK (0x5 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_BS3 (0x6 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_RW (0x7 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_CRC1 (0x8 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_CRC2 (0x9 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_BS0 (0xa << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_END1 (0xb << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_END2W (0xc << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_END2R (0xd << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_DONE (0xe << 20)
+#define SSP_DEBUG_CMD_OE (1 << 19)
+#define SSP_DEBUG_DMA_SM_MASK (0x7 << 16)
+#define SSP_DEBUG_DMA_SM_OFFSET 16
+#define SSP_DEBUG_DMA_SM_DMA_IDLE (0x0 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_DMAREQ (0x1 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_DMAACK (0x2 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_STALL (0x3 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_BUSY (0x4 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_DONE (0x5 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_COUNT (0x6 << 16)
+#define SSP_DEBUG_MMC_SM_MASK (0xf << 12)
+#define SSP_DEBUG_MMC_SM_OFFSET 12
+#define SSP_DEBUG_MMC_SM_MMC_IDLE (0x0 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_CMD (0x1 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_TRC (0x2 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_RESP (0x3 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_RPRX (0x4 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_TX (0x5 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_CTOK (0x6 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_RX (0x7 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_CCS (0x8 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_PUP (0x9 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_WAIT (0xa << 12)
+#define SSP_DEBUG_CMD_SM_MASK (0x3 << 10)
+#define SSP_DEBUG_CMD_SM_OFFSET 10
+#define SSP_DEBUG_CMD_SM_CSM_IDLE (0x0 << 10)
+#define SSP_DEBUG_CMD_SM_CSM_INDEX (0x1 << 10)
+#define SSP_DEBUG_CMD_SM_CSM_ARG (0x2 << 10)
+#define SSP_DEBUG_CMD_SM_CSM_CRC (0x3 << 10)
+#define SSP_DEBUG_SSP_CMD (1 << 9)
+#define SSP_DEBUG_SSP_RESP (1 << 8)
+#define SSP_DEBUG_SSP_RXD_MASK 0xff
+#define SSP_DEBUG_SSP_RXD_OFFSET 0
+
+#define SSP_VERSION_MAJOR_MASK (0xff << 24)
+#define SSP_VERSION_MAJOR_OFFSET 24
+#define SSP_VERSION_MINOR_MASK (0xff << 16)
+#define SSP_VERSION_MINOR_OFFSET 16
+#define SSP_VERSION_STEP_MASK 0xffff
+#define SSP_VERSION_STEP_OFFSET 0
+
+#endif /* __REGS_SSP_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-timrot.h b/arch/arm/include/asm/arch-mx28/regs-timrot.h
new file mode 100644
index 0000000..27e511e
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-timrot.h
@@ -0,0 +1,167 @@
+/*
+ * Freescale i.MX28 TIMROT Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_TIMROT_H__
+#define __REGS_TIMROT_H__
+
+struct mx28_timrot_regs {
+ mx28_reg(hw_timrot_rotctrl)
+ mx28_reg(hw_timrot_rotcount)
+ mx28_reg(hw_timrot_timctrl0)
+ mx28_reg(hw_timrot_running_count0)
+ mx28_reg(hw_timrot_fixed_count0)
+ mx28_reg(hw_timrot_match_count0)
+ mx28_reg(hw_timrot_timctrl1)
+ mx28_reg(hw_timrot_running_count1)
+ mx28_reg(hw_timrot_fixed_count1)
+ mx28_reg(hw_timrot_match_count1)
+ mx28_reg(hw_timrot_timctrl2)
+ mx28_reg(hw_timrot_running_count2)
+ mx28_reg(hw_timrot_fixed_count2)
+ mx28_reg(hw_timrot_match_count2)
+ mx28_reg(hw_timrot_timctrl3)
+ mx28_reg(hw_timrot_running_count3)
+ mx28_reg(hw_timrot_fixed_count3)
+ mx28_reg(hw_timrot_match_count3)
+ mx28_reg(hw_timrot_version)
+};
+
+#define TIMROT_ROTCTRL_SFTRST (1 << 31)
+#define TIMROT_ROTCTRL_CLKGATE (1 << 30)
+#define TIMROT_ROTCTRL_ROTARY_PRESENT (1 << 29)
+#define TIMROT_ROTCTRL_TIM3_PRESENT (1 << 28)
+#define TIMROT_ROTCTRL_TIM2_PRESENT (1 << 27)
+#define TIMROT_ROTCTRL_TIM1_PRESENT (1 << 26)
+#define TIMROT_ROTCTRL_TIM0_PRESENT (1 << 25)
+#define TIMROT_ROTCTRL_STATE_MASK (0x7 << 22)
+#define TIMROT_ROTCTRL_STATE_OFFSET 22
+#define TIMROT_ROTCTRL_DIVIDER_MASK (0x3f << 16)
+#define TIMROT_ROTCTRL_DIVIDER_OFFSET 16
+#define TIMROT_ROTCTRL_RELATIVE (1 << 12)
+#define TIMROT_ROTCTRL_OVERSAMPLE_MASK (0x3 << 10)
+#define TIMROT_ROTCTRL_OVERSAMPLE_OFFSET 10
+#define TIMROT_ROTCTRL_OVERSAMPLE_8X (0x0 << 10)
+#define TIMROT_ROTCTRL_OVERSAMPLE_4X (0x1 << 10)
+#define TIMROT_ROTCTRL_OVERSAMPLE_2X (0x2 << 10)
+#define TIMROT_ROTCTRL_OVERSAMPLE_1X (0x3 << 10)
+#define TIMROT_ROTCTRL_POLARITY_B (1 << 9)
+#define TIMROT_ROTCTRL_POLARITY_A (1 << 8)
+#define TIMROT_ROTCTRL_SELECT_B_MASK (0xf << 4)
+#define TIMROT_ROTCTRL_SELECT_B_OFFSET 4
+#define TIMROT_ROTCTRL_SELECT_B_NEVER_TICK (0x0 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM0 (0x1 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM1 (0x2 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM2 (0x3 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM3 (0x4 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM4 (0x5 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM5 (0x6 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM6 (0x7 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM7 (0x8 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_ROTARYA (0x9 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_ROTARYB (0xa << 4)
+#define TIMROT_ROTCTRL_SELECT_A_MASK 0xf
+#define TIMROT_ROTCTRL_SELECT_A_OFFSET 0
+#define TIMROT_ROTCTRL_SELECT_A_NEVER_TICK 0x0
+#define TIMROT_ROTCTRL_SELECT_A_PWM0 0x1
+#define TIMROT_ROTCTRL_SELECT_A_PWM1 0x2
+#define TIMROT_ROTCTRL_SELECT_A_PWM2 0x3
+#define TIMROT_ROTCTRL_SELECT_A_PWM3 0x4
+#define TIMROT_ROTCTRL_SELECT_A_PWM4 0x5
+#define TIMROT_ROTCTRL_SELECT_A_PWM5 0x6
+#define TIMROT_ROTCTRL_SELECT_A_PWM6 0x7
+#define TIMROT_ROTCTRL_SELECT_A_PWM7 0x8
+#define TIMROT_ROTCTRL_SELECT_A_ROTARYA 0x9
+#define TIMROT_ROTCTRL_SELECT_A_ROTARYB 0xa
+
+#define TIMROT_ROTCOUNT_UPDOWN_MASK 0xffff
+#define TIMROT_ROTCOUNT_UPDOWN_OFFSET 0
+
+#define TIMROT_TIMCTRLn_IRQ (1 << 15)
+#define TIMROT_TIMCTRLn_IRQ_EN (1 << 14)
+#define TIMROT_TIMCTRLn_MATCH_MODE (1 << 11)
+#define TIMROT_TIMCTRLn_POLARITY (1 << 8)
+#define TIMROT_TIMCTRLn_UPDATE (1 << 7)
+#define TIMROT_TIMCTRLn_RELOAD (1 << 6)
+#define TIMROT_TIMCTRLn_PRESCALE_MASK (0x3 << 4)
+#define TIMROT_TIMCTRLn_PRESCALE_OFFSET 4
+#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_1 (0x0 << 4)
+#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_2 (0x1 << 4)
+#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_4 (0x2 << 4)
+#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_8 (0x3 << 4)
+#define TIMROT_TIMCTRLn_SELECT_MASK 0xf
+#define TIMROT_TIMCTRLn_SELECT_OFFSET 0
+#define TIMROT_TIMCTRLn_SELECT_NEVER_TICK 0x0
+#define TIMROT_TIMCTRLn_SELECT_PWM0 0x1
+#define TIMROT_TIMCTRLn_SELECT_PWM1 0x2
+#define TIMROT_TIMCTRLn_SELECT_PWM2 0x3
+#define TIMROT_TIMCTRLn_SELECT_PWM3 0x4
+#define TIMROT_TIMCTRLn_SELECT_PWM4 0x5
+#define TIMROT_TIMCTRLn_SELECT_PWM5 0x6
+#define TIMROT_TIMCTRLn_SELECT_PWM6 0x7
+#define TIMROT_TIMCTRLn_SELECT_PWM7 0x8
+#define TIMROT_TIMCTRLn_SELECT_ROTARYA 0x9
+#define TIMROT_TIMCTRLn_SELECT_ROTARYB 0xa
+#define TIMROT_TIMCTRLn_SELECT_32KHZ_XTAL 0xb
+#define TIMROT_TIMCTRLn_SELECT_8KHZ_XTAL 0xc
+#define TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL 0xd
+#define TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL 0xe
+#define TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS 0xf
+
+#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK 0xffffffff
+#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET 0
+
+#define TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK 0xffffffff
+#define TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET 0
+
+#define TIMROT_MATCH_COUNTn_MATCH_COUNT_MASK 0xffffffff
+#define TIMROT_MATCH_COUNTn_MATCH_COUNT_OFFSET 0
+
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_MASK (0xf << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_OFFSET 16
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_NEVER_TICK (0x0 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM0 (0x1 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM1 (0x2 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM2 (0x3 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM3 (0x4 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM4 (0x5 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM5 (0x6 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM6 (0x7 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM7 (0x8 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYA (0x9 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYB (0xa << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_32KHZ_XTAL (0xb << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_8KHZ_XTAL (0xc << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL (0xd << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL (0xe << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS (0xf << 16)
+#define TIMROT_TIMCTRL3_DUTY_CYCLE (1 << 9)
+
+#define TIMROT_VERSION_MAJOR_MASK (0xff << 24)
+#define TIMROT_VERSION_MAJOR_OFFSET 24
+#define TIMROT_VERSION_MINOR_MASK (0xff << 16)
+#define TIMROT_VERSION_MINOR_OFFSET 16
+#define TIMROT_VERSION_STEP_MASK 0xffff
+#define TIMROT_VERSION_STEP_OFFSET 0
+
+#endif /* __REGS_TIMROT_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-uartdbg.h b/arch/arm/include/asm/arch-mx28/regs-uartdbg.h
new file mode 100644
index 0000000..a2819e5
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-uartdbg.h
@@ -0,0 +1,182 @@
+/*
+ * Freescale i.MX28 UARTDBG Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_UARTDBG_H__
+#define __REGS_UARTDBG_H__
+
+struct mx28_uartdbg_regs {
+ uint32_t hw_uartdbg_dr; /* 0x00 */
+ uint32_t hw_uartdbg_ecr;
+
+ uint32_t reserved1[4];
+
+ uint32_t hw_uartdbg_fr;
+
+ uint32_t reserved2;
+
+ uint32_t hw_uartdbg_ilpr; /* 0x20 */
+ uint32_t hw_uartdbg_ibrd;
+ uint32_t hw_uartdbg_fbrd;
+ uint32_t hw_uartdbg_lcr_h;
+ uint32_t hw_uartdbg_cr; /* 0x30 */
+ uint32_t hw_uartdbg_ifls;
+ uint32_t hw_uartdbg_imsc;
+ uint32_t hw_uartdbg_ris;
+ uint32_t hw_uartdbg_mis; /* 0x40 */
+ uint32_t hw_uartdbg_icr;
+ uint32_t hw_uartdbg_dmacr;
+};
+
+#define UARTDBG_DR_OE (1 << 11)
+#define UARTDBG_DR_BE (1 << 10)
+#define UARTDBG_DR_PE (1 << 9)
+#define UARTDBG_DR_FE (1 << 8)
+#define UARTDBG_DR_DATA_MASK 0xff
+#define UARTDBG_DR_DATA_OFFSET 0
+
+#define UARTDBG_RSR_ECR_EC_MASK (0xf << 4)
+#define UARTDBG_RSR_ECR_EC_OFFSET 4
+#define UARTDBG_RSR_ECR_OE (1 << 3)
+#define UARTDBG_RSR_ECR_BE (1 << 2)
+#define UARTDBG_RSR_ECR_PE (1 << 1)
+#define UARTDBG_RSR_ECR_FE (1 << 0)
+
+#define UARTDBG_FR_RI (1 << 8)
+#define UARTDBG_FR_TXFE (1 << 7)
+#define UARTDBG_FR_RXFF (1 << 6)
+#define UARTDBG_FR_TXFF (1 << 5)
+#define UARTDBG_FR_RXFE (1 << 4)
+#define UARTDBG_FR_BUSY (1 << 3)
+#define UARTDBG_FR_DCD (1 << 2)
+#define UARTDBG_FR_DSR (1 << 1)
+#define UARTDBG_FR_CTS (1 << 0)
+
+#define UARTDBG_ILPR_ILPDVSR_MASK 0xff
+#define UARTDBG_ILPR_ILPDVSR_OFFSET 0
+
+#define UARTDBG_IBRD_BAUD_DIVINT_MASK 0xffff
+#define UARTDBG_IBRD_BAUD_DIVINT_OFFSET 0
+
+#define UARTDBG_FBRD_BAUD_DIVFRAC_MASK 0x3f
+#define UARTDBG_FBRD_BAUD_DIVFRAC_OFFSET 0
+
+#define UARTDBG_LCR_H_SPS (1 << 7)
+#define UARTDBG_LCR_H_WLEN_MASK (0x3 << 5)
+#define UARTDBG_LCR_H_WLEN_OFFSET 5
+#define UARTDBG_LCR_H_FEN (1 << 4)
+#define UARTDBG_LCR_H_STP2 (1 << 3)
+#define UARTDBG_LCR_H_EPS (1 << 2)
+#define UARTDBG_LCR_H_PEN (1 << 1)
+#define UARTDBG_LCR_H_BRK (1 << 0)
+
+
+#define UARTDBG_CR_CTSEN (1 << 15)
+#define UARTDBG_CR_RTSEN (1 << 14)
+#define UARTDBG_CR_OUT2 (1 << 13)
+#define UARTDBG_CR_OUT1 (1 << 12)
+#define UARTDBG_CR_RTS (1 << 11)
+#define UARTDBG_CR_DTR (1 << 10)
+#define UARTDBG_CR_RXE (1 << 9)
+#define UARTDBG_CR_TXE (1 << 8)
+#define UARTDBG_CR_LBE (1 << 7)
+#define UARTDBG_CR_RESERVED_MASK (0xf << 3)
+#define UARTDBG_CR_RESERVED_OFFSET 3
+#define UARTDBG_CR_SIRLP (1 << 2)
+#define UARTDBG_CR_SIREN (1 << 1)
+#define UARTDBG_CR_UARTEN (1 << 0)
+
+#define UARTDBG_IFLS_RXIFLSEL_MASK (0x7 << 3)
+#define UARTDBG_IFLS_RXIFLSEL_OFFSET 3
+#define UARTDBG_IFLS_RXIFLSEL_ONE_EIGHT (0x0 << 3)
+#define UARTDBG_IFLS_RXIFLSEL_ONE_QUARTER (0x1 << 3)
+#define UARTDBG_IFLS_RXIFLSEL_ONE_HALF (0x2 << 3)
+#define UARTDBG_IFLS_RXIFLSEL_THREE_QUARTERS (0x3 << 3)
+#define UARTDBG_IFLS_RXIFLSEL_SEVEN_EIGHTHS (0x4 << 3)
+#define UARTDBG_IFLS_RXIFLSEL_INVALID5 (0x5 << 3)
+#define UARTDBG_IFLS_RXIFLSEL_INVALID6 (0x6 << 3)
+#define UARTDBG_IFLS_RXIFLSEL_INVALID7 (0x7 << 3)
+#define UARTDBG_IFLS_TXIFLSEL_MASK 0x7
+#define UARTDBG_IFLS_TXIFLSEL_OFFSET 0
+#define UARTDBG_IFLS_TXIFLSEL_ONE_EIGHT 0x0
+#define UARTDBG_IFLS_TXIFLSEL_ONE_QUARTER 0x1
+#define UARTDBG_IFLS_TXIFLSEL_ONE_HALF 0x2
+#define UARTDBG_IFLS_TXIFLSEL_THREE_QUARTERS 0x3
+#define UARTDBG_IFLS_TXIFLSEL_SEVEN_EIGHTHS 0x4
+#define UARTDBG_IFLS_TXIFLSEL_INVALID5 0x5
+#define UARTDBG_IFLS_TXIFLSEL_INVALID6 0x6
+#define UARTDBG_IFLS_TXIFLSEL_INVALID7 0x7
+
+#define UARTDBG_IMSC_OEIM (1 << 10)
+#define UARTDBG_IMSC_BEIM (1 << 9)
+#define UARTDBG_IMSC_PEIM (1 << 8)
+#define UARTDBG_IMSC_FEIM (1 << 7)
+#define UARTDBG_IMSC_RTIM (1 << 6)
+#define UARTDBG_IMSC_TXIM (1 << 5)
+#define UARTDBG_IMSC_RXIM (1 << 4)
+#define UARTDBG_IMSC_DSRMIM (1 << 3)
+#define UARTDBG_IMSC_DCDMIM (1 << 2)
+#define UARTDBG_IMSC_CTSMIM (1 << 1)
+#define UARTDBG_IMSC_RIMIM (1 << 0)
+
+#define UARTDBG_RIS_OERIS (1 << 10)
+#define UARTDBG_RIS_BERIS (1 << 9)
+#define UARTDBG_RIS_PERIS (1 << 8)
+#define UARTDBG_RIS_FERIS (1 << 7)
+#define UARTDBG_RIS_RTRIS (1 << 6)
+#define UARTDBG_RIS_TXRIS (1 << 5)
+#define UARTDBG_RIS_RXRIS (1 << 4)
+#define UARTDBG_RIS_DSRRMIS (1 << 3)
+#define UARTDBG_RIS_DCDRMIS (1 << 2)
+#define UARTDBG_RIS_CTSRMIS (1 << 1)
+#define UARTDBG_RIS_RIRMIS (1 << 0)
+
+#define UARTDBG_MIS_OEMIS (1 << 10)
+#define UARTDBG_MIS_BEMIS (1 << 9)
+#define UARTDBG_MIS_PEMIS (1 << 8)
+#define UARTDBG_MIS_FEMIS (1 << 7)
+#define UARTDBG_MIS_RTMIS (1 << 6)
+#define UARTDBG_MIS_TXMIS (1 << 5)
+#define UARTDBG_MIS_RXMIS (1 << 4)
+#define UARTDBG_MIS_DSRMMIS (1 << 3)
+#define UARTDBG_MIS_DCDMMIS (1 << 2)
+#define UARTDBG_MIS_CTSMMIS (1 << 1)
+#define UARTDBG_MIS_RIMMIS (1 << 0)
+
+#define UARTDBG_ICR_OEIC (1 << 10)
+#define UARTDBG_ICR_BEIC (1 << 9)
+#define UARTDBG_ICR_PEIC (1 << 8)
+#define UARTDBG_ICR_FEIC (1 << 7)
+#define UARTDBG_ICR_RTIC (1 << 6)
+#define UARTDBG_ICR_TXIC (1 << 5)
+#define UARTDBG_ICR_RXIC (1 << 4)
+#define UARTDBG_ICR_DSRMIC (1 << 3)
+#define UARTDBG_ICR_DCDMIC (1 << 2)
+#define UARTDBG_ICR_CTSMIC (1 << 1)
+#define UARTDBG_ICR_RIMIC (1 << 0)
+
+#define UARTDBG_DMACR_DMAONERR (1 << 2)
+#define UARTDBG_DMACR_TXDMAE (1 << 1)
+#define UARTDBG_DMACR_RXDMAE (1 << 0)
+
+#endif /* __REGS_UARTDBG_H__ */
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU
2011-09-08 20:42 ` [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU Marek Vasut
@ 2011-09-09 8:23 ` Stefano Babic
2011-09-09 8:54 ` Heiko Schocher
2011-09-09 10:12 ` Marek Vasut
0 siblings, 2 replies; 68+ messages in thread
From: Stefano Babic @ 2011-09-09 8:23 UTC (permalink / raw)
To: u-boot
On 09/08/2011 10:42 PM, Marek Vasut wrote:
> This patch supports:
> - Timers
> - Debug UART
> - Clock
Hi Marek,
a general remark. It seems to me that your patchset comes directly from
your development, as it looks like what I normally have when I develop a
new board ;-)
However, to put into mainline and to make review easier, because this is
a porting to a new SOC, I am expecting that all patches related to a new
file are squashed together. It makes no sense to have several patches
regarding, for example, m28evk.h, because this is a new file.
Another general remark here: we tend to have the same structure and the
same files for all IMX SOC. This means that all IMX SOC have a
imx-regs.h that contain the required register definitions (really a
subset what we have in kernel). Is it really necessary to split the
definitions in several small files ?
>
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>
> ---
> arch/arm/cpu/arm926ejs/mx28/Makefile | 46 +++
> arch/arm/cpu/arm926ejs/mx28/clock.c | 359 ++++++++++++++++++++++
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 131 ++++++++
> arch/arm/cpu/arm926ejs/mx28/timer.c | 143 +++++++++
> arch/arm/include/asm/arch-mx28/clock.h | 48 +++
> arch/arm/include/asm/arch-mx28/imx-regs.h | 33 ++
> arch/arm/include/asm/arch-mx28/mx28.h | 30 ++
> arch/arm/include/asm/arch-mx28/regs-base.h | 88 ++++++
> arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 308 +++++++++++++++++++
> arch/arm/include/asm/arch-mx28/regs-common.h | 66 ++++
> arch/arm/include/asm/arch-mx28/regs-power.h | 409 +++++++++++++++++++++++++
> arch/arm/include/asm/arch-mx28/regs-ssp.h | 345 +++++++++++++++++++++
> arch/arm/include/asm/arch-mx28/regs-timrot.h | 167 ++++++++++
> arch/arm/include/asm/arch-mx28/regs-uartdbg.h | 182 +++++++++++
> 14 files changed, 2355 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/Makefile
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c
> create mode 100644 arch/arm/include/asm/arch-mx28/clock.h
> create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h
> create mode 100644 arch/arm/include/asm/arch-mx28/mx28.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-uartdbg.h
regs-uartdbg.h is used only by the driver, right ? The driver should be
in the driver directory, and also its header. See drivers/serial/
> +
> +#include <common.h>
> +#include <asm/errno.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/regs-common.h>
> +#include <asm/arch/regs-base.h>
> +#include <asm/arch/regs-clkctrl.h>
> +#include <asm/arch/regs-ssp.h>
Again, regarding file splitting for register. If you prefer to have
several files, I think it is better that imx-regs.h include them. Then
we have still a common header imx-regs.h that contains all needed
register definitions. This is a better interface for a board maintainer.
> +
> +/* The PLL frequency is always 480MHz, see section 10.2 in iMX28 datasheet. */
> +#define PLL_FREQ_KHZ 480000
> +#define PLL_FREQ_COEF 18
> +/* The XTAL frequency is always 24MHz, see section 10.2 in iMX28 datasheet. */
> +#define XTAL_FREQ_KHZ 24000
> +
> +#define PLL_FREQ_MHZ (PLL_FREQ_KHZ / 1000)
> +#define XTAL_FREQ_MHZ (XTAL_FREQ_KHZ / 1000)
> +
> +uint32_t mx28_get_pclk(void)
This function must be static.
> +
> +uint32_t mx28_get_hclk(void)
Ditto. All *_get_some_clk are exported with mxc_get_clk(index_number)
> +
> +uint32_t mx28_get_emiclk(void)
Ditto
> +static inline void enable_gpmi_clk(void)
> +{
Is there a reason to have inline ? And this is called only once. Do we
have a enable_ without a disable_ function ? Your mx28_get_gpmiclk()
enables without the caller knows the gpmi clock. Strange for a pure
"get" function.
> +
> +uint32_t mx28_get_gpmiclk(void)
Also static.
> +/*
> + * Set IO clock frequency, in kHz
> + */
> +void mx28_set_ioclk(unsigned int io, uint32_t freq)
> +{
Please use an enum for io - it cannot assume any integer value,
something with GATE0 and GATE1 to be the call easier to understand.
> +
> +/*
> + * Get IO clock, returns IO clock in kHz
> + */
> +uint32_t mx28_get_ioclk(unsigned int io)
Static function. Do you think to export this function ? In this case,
you need to add enums for mxc_get_clk().
> +
> +/*
> + * Configure SSP clock frequency, in kHz
> + */
> +void mx28_set_sspclk(unsigned int ssp, uint32_t freq, int xtal)
> +{
> + struct mx28_clkctrl_regs *clkctrl_regs =
> + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
> + uint32_t clk, clkreg;
> +
> + if (ssp > 3)
> + return;
Maybe a define in imx-regs.h setting the max number of serial ports ?
> +
> + clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) + (ssp * 0x10);
You have a pointer to a mx28_reg structure. Replace fixed offset with a
sizeof.
> +uint32_t mx28_get_sspclk(unsigned int ssp)
> +{
Static as other get functions.
> +uint32_t mxc_get_clock(enum mxc_clock clk)
> +{
> + switch (clk) {
> + case MXC_ARM_CLK:
> + return mx28_get_pclk() * 1000000;
> + case MXC_GPMI_CLK:
> + return mx28_get_gpmiclk() * 1000000;
> + case MXC_AHB_CLK:
> + case MXC_IPG_CLK:
> + return mx28_get_hclk() * 1000000;
Probably you need to add some new enums if you want to export all your
get functions, such as MXC_GET_UARTCLK for your mx28_get_sspclk (or new
enums if you think there new features).
> +
> +#include <common.h>
> +#include <asm/errno.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/regs-common.h>
> +#include <asm/arch/regs-base.h>
> +#include <asm/arch/regs-clkctrl.h>
> +#include <asm/arch/regs-power.h>
> +#include <asm/arch/mx28.h>
Same comment for register definitions splitting as before.
> +/* Lowlevel init isn't used on i.MX28, so just have a dummy here */
> +inline void lowlevel_init(void) {}
Ok.
> +
> +void reset_cpu(ulong ignored) __attribute__((noreturn));
> +
> +void reset_cpu(ulong ignored)
> +{
> + struct mx28_clkctrl_regs *clkctrl_regs =
> + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
> + struct mx28_power_regs *power_regs =
> + (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + writel(0, &power_regs->hw_power_charge);
> + writel(0, &power_regs->hw_power_minpwr);
> + writel(CLKCTRL_RESET_DIG, &clkctrl_regs->hw_clkctrl_reset);
> +
> + /* Endless loop, reset will exit from here */
> + for (;;)
> + ;
To understand: does a reset mean on the i.MX28 a power off ? Do you turn
off the power ? If this is the case, some features are not possible (as
PRAM, for example) on this SOC.
> +int mx28_wait_mask_set(struct mx28_register *reg, uint32_t mask, int timeout)
> +{
> + while (--timeout) {
> + if ((readl(®->reg) & mask) == mask)
> + break;
> + udelay(1);
> + }
> +
> + return !timeout;
> +}
> +
> +int mx28_wait_mask_clr(struct mx28_register *reg, uint32_t mask, int timeout)
> +{
> + while (--timeout) {
> + if ((readl(®->reg) & mask) == 0)
> + break;
> + udelay(1);
> + }
> +
> + return !timeout;
> +}
> +
> +int mx28_reset_block(struct mx28_register *reg)
> +{
> + /* Clear SFTRST */
> + writel(MX28_BLOCK_SFTRST, ®->reg_clr);
> +
> + if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
> + return 1;
> +
> + /* Clear CLKGATE */
> + writel(MX28_BLOCK_CLKGATE, ®->reg_clr);
> +
> + /* Set SFTRST */
> + writel(MX28_BLOCK_SFTRST, ®->reg_set);
> +
> + /* Wait for CLKGATE being set */
> + if (mx28_wait_mask_set(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
> + return 1;
> +
> + /* Clear SFTRST */
> + writel(MX28_BLOCK_SFTRST, ®->reg_clr);
> +
> + if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
> + return 1;
> +
> + /* Clear CLKGATE */
> + writel(MX28_BLOCK_CLKGATE, ®->reg_clr);
> +
> + if (mx28_wait_mask_clr(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
> + return 1;
> +
> + return 0;
> +}
> +
> +#if defined(CONFIG_DISPLAY_CPUINFO)
> +int print_cpuinfo(void)
> +{
> + printf("Freescale i.MX28 family\n");
> + printf("CPU: %3d MHz\n", mx28_get_pclk());
> + printf("BUS: %3d MHz\n", mx28_get_hclk());
> + printf("EMI: %3d MHz\n", mx28_get_emiclk());
> + printf("GPMI: %3d MHz\n", mx28_get_gpmiclk());
> + return 0;
> +}
The function has the name "cpuinfo", but you print nothing about the
cpu. Instead of that, the clock's value are printed.
After some discussion we have this common statement for the i.MX SOCs:
- the print_cpuinfo gives the revision number and the reset cause
See all other i.MX implementations
- clocks are printed with a command, whose name *must* be (because we
use for PowerPC also) simply "clocks". This avoid too much printing at
the startup. See for example do_mx35_showclocks(), or the same for mx5.
Please follow this rule.
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/regs-common.h>
> +#include <asm/arch/regs-base.h>
> +#include <asm/arch/regs-timrot.h>
> +#include <asm/arch/mx28.h>
Remark to check the register definitions. My idea is to have a simple
easy to understand interface to get the register definitions for a SOC,
and I would replace this stuff only with imx-regs.h. What do you think ?
> +ulong get_timer(ulong base)
> +{
> + struct mx28_timrot_regs *timrot_regs =
> + (struct mx28_timrot_regs *)MXS_TIMROT_BASE;
> +
> + /* Current tick value */
> + uint32_t now = readl(&timrot_regs->hw_timrot_running_count0);
> +
> + if (lastdec >= now) {
> + /*
> + * normal mode (non roll)
> + * move stamp forward with absolut diff ticks
> + */
> + timestamp += (lastdec - now);
> + } else {
> + /* we have rollover of decrementer */
> + timestamp += (TIMER_LOAD_VAL - now) + lastdec;
> +
> + }
> + lastdec = now;
> +
> + return tick_to_time(timestamp) - base;
> +}
Not sure, but it seems to me this implementation does not follow the
last changes to this kind of interface. We should implement
get_timer_masked(), but then get_timer is simply:
ulong get_timer(ulong base)
{
return get_timer_masked() - base;
}
as I see in most SOC. However, Heiko (in CC) knows more deeply this
stuff as me, and he can better explain us if this implementation is
correct.
I know that other i.MX are look like your implementation, but they are
quite old...
> +
> +/* We use the HW_DIGCTL_MICROSECONDS register for sub-millisecond timer. */
> +#define MX28_HW_DIGCTL_MICROSECONDS 0x8001c0c0
> +
> +void __udelay(unsigned long usec)
> +{
> + uint32_t old, new, incr;
> + uint32_t counter = 0;
> +
> + old = readl(MX28_HW_DIGCTL_MICROSECONDS);
> +
> + while (counter < usec) {
> + new = readl(MX28_HW_DIGCTL_MICROSECONDS);
> +
> + /* Check if the timer wrapped. */
> + if (new < old) {
> + incr = 0xffffffff - old;
> + incr += new;
> + } else {
> + incr = new - old;
> + }
The same for __udelay. I think there is a common agreement to it, and I
am expecting that the code to manage overflow is similar.
Should we export also a get_ticks() ?
> diff --git a/arch/arm/include/asm/arch-mx28/clock.h b/arch/arm/include/asm/arch-mx28/clock.h
> new file mode 100644
> index 0000000..5e13a51
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-mx28/clock.h
> @@ -0,0 +1,48 @@
> +/*
> + * Freescale i.MX28 Clock
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + */
> +
> +#ifndef __CLOCK_H__
> +#define __CLOCK_H__
> +
> +enum mxc_clock {
> + MXC_ARM_CLK = 0,
> + MXC_AHB_CLK,
> + MXC_IPG_CLK,
> + MXC_GPMI_CLK,
> +};
> +
> +uint32_t mxc_get_clock(enum mxc_clock clk);
> +uint32_t mx28_get_pclk(void);
> +uint32_t mx28_get_hclk(void);
> +uint32_t mx28_get_emiclk(void);
> +uint32_t mx28_get_gpmiclk(void);
wrong. You should export only mxc_get_clock.
> +
> +void mx28_set_ioclk(unsigned int io, uint32_t freq);
> +uint32_t mx28_get_ioclk(unsigned int io);
Ditto.
> diff --git a/arch/arm/include/asm/arch-mx28/imx-regs.h b/arch/arm/include/asm/arch-mx28/imx-regs.h
> new file mode 100644
> index 0000000..a082f1d
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-mx28/imx-regs.h
> @@ -0,0 +1,33 @@
> +/*
> + * Freescale i.MX28 Registers
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + */
> +
> +#ifndef __IMX_REGS_H__
> +#define __IMX_REGS_H__
> +
> +#include <asm/arch/regs-common.h>
> +#include <asm/arch/regs-base.h>
> +#include <asm/arch/regs-clkctrl.h>
> +#include <asm/arch/regs-ssp.h>
> +#include <asm/arch/regs-timrot.h>
> +#include <asm/arch/regs-uartdbg.h>
> +
Ok, I see. Then I do not understand why you include explicitely each
single file in the code instead of imx-regs.h only.
> diff --git a/arch/arm/include/asm/arch-mx28/mx28.h b/arch/arm/include/asm/arch-mx28/mx28.h
> new file mode 100644
> index 0000000..a262c05
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-mx28/mx28.h
> @@ -0,0 +1,30 @@
> +/*
> + * Freescale i.MX28 MX28 specific functions
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + */
> +
> +#ifndef __MX28_H__
> +#define __MX28_H__
> +
> +int mx28_reset_block(struct mx28_register *reg);
> +int mx28_wait_mask_set(struct mx28_register *reg, uint32_t mask, int timeout);
> +int mx28_wait_mask_clr(struct mx28_register *reg, uint32_t mask, int timeout);
> +
> +#endif /* __MX28_H__ */
Should be these function available also outside the SOC directory ? If
the answer is yes, the common name (copied from omap) for the header
file to add such prototypes is sys_proto.h
> diff --git a/arch/arm/include/asm/arch-mx28/regs-clkctrl.h b/arch/arm/include/asm/arch-mx28/regs-clkctrl.h
> new file mode 100644
> index 0000000..66d492f
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-mx28/regs-clkctrl.h
> @@ -0,0 +1,308 @@
> +/*
> + * Freescale i.MX28 CLKCTRL Register Definitions
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * Based on code from LTIB:
> + * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + */
> +
> +#ifndef __REGS_CLKCTRL_H__
> +#define __REGS_CLKCTRL_H__
> +
> +struct mx28_clkctrl_regs {
I think you should protect with defined(__ASSEMBLY__). Register
definitions could be included by assembly file also - even if it is not
the case now with M28EVK, it could be in future.
> + mx28_reg(hw_clkctrl_pll0ctrl0) /* 0x00 */
This adds an implicit order to include your file. mx28_reg is not
defined here. regs-common.h must be included before this file. This is
pretty bad.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU
2011-09-09 8:23 ` Stefano Babic
@ 2011-09-09 8:54 ` Heiko Schocher
2011-09-09 10:12 ` Marek Vasut
1 sibling, 0 replies; 68+ messages in thread
From: Heiko Schocher @ 2011-09-09 8:54 UTC (permalink / raw)
To: u-boot
Hello Stefano,
Stefano Babic wrote:
> On 09/08/2011 10:42 PM, Marek Vasut wrote:
>> This patch supports:
>> - Timers
>> - Debug UART
>> - Clock
>
> Hi Marek,
>
> a general remark. It seems to me that your patchset comes directly from
> your development, as it looks like what I normally have when I develop a
> new board ;-)
I also tend to do such things ;-)
> However, to put into mainline and to make review easier, because this is
> a porting to a new SOC, I am expecting that all patches related to a new
> file are squashed together. It makes no sense to have several patches
> regarding, for example, m28evk.h, because this is a new file.
Yep, for new files, it makes sense to make only one patch.
> Another general remark here: we tend to have the same structure and the
> same files for all IMX SOC. This means that all IMX SOC have a
> imx-regs.h that contain the required register definitions (really a
> subset what we have in kernel). Is it really necessary to split the
> definitions in several small files ?
Hmm... is this really a good thing? If I look in the statistic
below, this results in a big (lines > 1000) file ... I don;t
like such big files, but this is just a personal taste ...
>
>> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
>> Cc: Stefano Babic <sbabic@denx.de>
>> Cc: Wolfgang Denk <wd@denx.de>
>> Cc: Detlev Zundel <dzu@denx.de>
>> ---
>> arch/arm/cpu/arm926ejs/mx28/Makefile | 46 +++
>> arch/arm/cpu/arm926ejs/mx28/clock.c | 359 ++++++++++++++++++++++
>> arch/arm/cpu/arm926ejs/mx28/mx28.c | 131 ++++++++
>> arch/arm/cpu/arm926ejs/mx28/timer.c | 143 +++++++++
>> arch/arm/include/asm/arch-mx28/clock.h | 48 +++
>> arch/arm/include/asm/arch-mx28/imx-regs.h | 33 ++
>> arch/arm/include/asm/arch-mx28/mx28.h | 30 ++
>> arch/arm/include/asm/arch-mx28/regs-base.h | 88 ++++++
>> arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 308 +++++++++++++++++++
>> arch/arm/include/asm/arch-mx28/regs-common.h | 66 ++++
>> arch/arm/include/asm/arch-mx28/regs-power.h | 409 +++++++++++++++++++++++++
>> arch/arm/include/asm/arch-mx28/regs-ssp.h | 345 +++++++++++++++++++++
>> arch/arm/include/asm/arch-mx28/regs-timrot.h | 167 ++++++++++
>> arch/arm/include/asm/arch-mx28/regs-uartdbg.h | 182 +++++++++++
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU
2011-09-09 8:23 ` Stefano Babic
2011-09-09 8:54 ` Heiko Schocher
@ 2011-09-09 10:12 ` Marek Vasut
2011-09-09 10:29 ` Stefano Babic
1 sibling, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-09 10:12 UTC (permalink / raw)
To: u-boot
On Friday, September 09, 2011 10:23:09 AM Stefano Babic wrote:
> On 09/08/2011 10:42 PM, Marek Vasut wrote:
> > This patch supports:
> > - Timers
> > - Debug UART
> > - Clock
>
> Hi Marek,
>
> a general remark. It seems to me that your patchset comes directly from
> your development, as it looks like what I normally have when I develop a
> new board ;-)
>
> However, to put into mainline and to make review easier, because this is
> a porting to a new SOC, I am expecting that all patches related to a new
> file are squashed together. It makes no sense to have several patches
> regarding, for example, m28evk.h, because this is a new file.
Done, I'll retest and send V2 of the series
>
> Another general remark here: we tend to have the same structure and the
> same files for all IMX SOC. This means that all IMX SOC have a
> imx-regs.h that contain the required register definitions (really a
> subset what we have in kernel). Is it really necessary to split the
> definitions in several small files ?
Just like Heiko said ... it'd produce terribly big and messy file. I'd prefer to
avoid that.
>
> > Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> > Cc: Stefano Babic <sbabic@denx.de>
> > Cc: Wolfgang Denk <wd@denx.de>
> > Cc: Detlev Zundel <dzu@denx.de>
> > ---
> >
> > arch/arm/cpu/arm926ejs/mx28/Makefile | 46 +++
> > arch/arm/cpu/arm926ejs/mx28/clock.c | 359
> > ++++++++++++++++++++++ arch/arm/cpu/arm926ejs/mx28/mx28.c |
> > 131 ++++++++
> > arch/arm/cpu/arm926ejs/mx28/timer.c | 143 +++++++++
> > arch/arm/include/asm/arch-mx28/clock.h | 48 +++
> > arch/arm/include/asm/arch-mx28/imx-regs.h | 33 ++
> > arch/arm/include/asm/arch-mx28/mx28.h | 30 ++
> > arch/arm/include/asm/arch-mx28/regs-base.h | 88 ++++++
> > arch/arm/include/asm/arch-mx28/regs-clkctrl.h | 308 +++++++++++++++++++
> > arch/arm/include/asm/arch-mx28/regs-common.h | 66 ++++
> > arch/arm/include/asm/arch-mx28/regs-power.h | 409
> > +++++++++++++++++++++++++ arch/arm/include/asm/arch-mx28/regs-ssp.h
> > | 345 +++++++++++++++++++++
> > arch/arm/include/asm/arch-mx28/regs-timrot.h | 167 ++++++++++
> > arch/arm/include/asm/arch-mx28/regs-uartdbg.h | 182 +++++++++++ 14
> > files changed, 2355 insertions(+), 0 deletions(-)
> > create mode 100644 arch/arm/cpu/arm926ejs/mx28/Makefile
> > create mode 100644 arch/arm/cpu/arm926ejs/mx28/clock.c
> > create mode 100644 arch/arm/cpu/arm926ejs/mx28/mx28.c
> > create mode 100644 arch/arm/cpu/arm926ejs/mx28/timer.c
> > create mode 100644 arch/arm/include/asm/arch-mx28/clock.h
> > create mode 100644 arch/arm/include/asm/arch-mx28/imx-regs.h
> > create mode 100644 arch/arm/include/asm/arch-mx28/mx28.h
> > create mode 100644 arch/arm/include/asm/arch-mx28/regs-base.h
> > create mode 100644 arch/arm/include/asm/arch-mx28/regs-clkctrl.h
> > create mode 100644 arch/arm/include/asm/arch-mx28/regs-common.h
> > create mode 100644 arch/arm/include/asm/arch-mx28/regs-power.h
> > create mode 100644 arch/arm/include/asm/arch-mx28/regs-ssp.h
> > create mode 100644 arch/arm/include/asm/arch-mx28/regs-timrot.h
> > create mode 100644 arch/arm/include/asm/arch-mx28/regs-uartdbg.h
>
> regs-uartdbg.h is used only by the driver, right ? The driver should be
> in the driver directory, and also its header. See drivers/serial/
Honestly, I need to check if the file is used at all. We replaced the original
driver with pl011 driver.
>
> > +
> > +#include <common.h>
> > +#include <asm/errno.h>
> > +#include <asm/io.h>
> > +#include <asm/arch/clock.h>
> > +#include <asm/arch/regs-common.h>
> > +#include <asm/arch/regs-base.h>
> > +#include <asm/arch/regs-clkctrl.h>
> > +#include <asm/arch/regs-ssp.h>
>
> Again, regarding file splitting for register. If you prefer to have
> several files, I think it is better that imx-regs.h include them. Then
> we have still a common header imx-regs.h that contains all needed
> register definitions. This is a better interface for a board maintainer.
Won't it make the compiler slower at compile time if it has to go through all of
the included files instead of a subset ?
>
> > +
> > +/* The PLL frequency is always 480MHz, see section 10.2 in iMX28
> > datasheet. */ +#define PLL_FREQ_KHZ 480000
> > +#define PLL_FREQ_COEF 18
> > +/* The XTAL frequency is always 24MHz, see section 10.2 in iMX28
> > datasheet. */ +#define XTAL_FREQ_KHZ 24000
> > +
> > +#define PLL_FREQ_MHZ (PLL_FREQ_KHZ / 1000)
> > +#define XTAL_FREQ_MHZ (XTAL_FREQ_KHZ / 1000)
> > +
> > +uint32_t mx28_get_pclk(void)
>
> This function must be static.
>
[...]
Fixed all the stuff
> > +/* Lowlevel init isn't used on i.MX28, so just have a dummy here */
> > +inline void lowlevel_init(void) {}
>
> Ok.
>
> > +
> > +void reset_cpu(ulong ignored) __attribute__((noreturn));
> > +
> > +void reset_cpu(ulong ignored)
> > +{
> > + struct mx28_clkctrl_regs *clkctrl_regs =
> > + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
> > + struct mx28_power_regs *power_regs =
> > + (struct mx28_power_regs *)MXS_POWER_BASE;
> > +
> > + writel(0, &power_regs->hw_power_charge);
> > + writel(0, &power_regs->hw_power_minpwr);
> > + writel(CLKCTRL_RESET_DIG, &clkctrl_regs->hw_clkctrl_reset);
> > +
> > + /* Endless loop, reset will exit from here */
> > + for (;;)
> > + ;
>
> To understand: does a reset mean on the i.MX28 a power off ? Do you turn
> off the power ? If this is the case, some features are not possible (as
> PRAM, for example) on this SOC.
This should just reset the chip. No poweroff.
[...]
>
> > +ulong get_timer(ulong base)
> > +{
> > + struct mx28_timrot_regs *timrot_regs =
> > + (struct mx28_timrot_regs *)MXS_TIMROT_BASE;
> > +
> > + /* Current tick value */
> > + uint32_t now = readl(&timrot_regs->hw_timrot_running_count0);
> > +
> > + if (lastdec >= now) {
> > + /*
> > + * normal mode (non roll)
> > + * move stamp forward with absolut diff ticks
> > + */
> > + timestamp += (lastdec - now);
> > + } else {
> > + /* we have rollover of decrementer */
> > + timestamp += (TIMER_LOAD_VAL - now) + lastdec;
> > +
> > + }
> > + lastdec = now;
> > +
> > + return tick_to_time(timestamp) - base;
> > +}
>
> Not sure, but it seems to me this implementation does not follow the
> last changes to this kind of interface. We should implement
> get_timer_masked(), but then get_timer is simply:
>
> ulong get_timer(ulong base)
> {
> return get_timer_masked() - base;
> }
>
> as I see in most SOC. However, Heiko (in CC) knows more deeply this
> stuff as me, and he can better explain us if this implementation is
> correct.
>
> I know that other i.MX are look like your implementation, but they are
> quite old...
I'll probably wait for someone to clearly say how this should be to avoid
reworking it for the fourth time.
[...]
> Best regards,
> Stefano Babic
Cheers
^ permalink raw reply [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU
2011-09-09 10:12 ` Marek Vasut
@ 2011-09-09 10:29 ` Stefano Babic
2011-09-09 10:50 ` Marek Vasut
0 siblings, 1 reply; 68+ messages in thread
From: Stefano Babic @ 2011-09-09 10:29 UTC (permalink / raw)
To: u-boot
On 09/09/2011 12:12 PM, Marek Vasut wrote:
>>
>> Another general remark here: we tend to have the same structure and the
>> same files for all IMX SOC. This means that all IMX SOC have a
>> imx-regs.h that contain the required register definitions (really a
>> subset what we have in kernel). Is it really necessary to split the
>> definitions in several small files ?
>
> Just like Heiko said ... it'd produce terribly big and messy file. I'd prefer to
> avoid that.
This is ok, and it is ok also that your imx-regs.h file contains only
the reg-specific include files. What is not ok, is that you do not use
imx-regs.h and you still includes each separate file. And as I see, they
must be included in a specific order.
This order must be defined only in imx-regs.h, as you have already done
and then each driver/board requires to include only imx-regs.h, without
having to care of the single files.
> Honestly, I need to check if the file is used at all. We replaced the original
> driver with pl011 driver.
Ok
>> Again, regarding file splitting for register. If you prefer to have
>> several files, I think it is better that imx-regs.h include them. Then
>> we have still a common header imx-regs.h that contains all needed
>> register definitions. This is a better interface for a board maintainer.
>
> Won't it make the compiler slower at compile time if it has to go through all of
> the included files instead of a subset ?
Well, I do not know if on our Intel-PC this makes a so noticeable
difference ;-)
What I remark here, it is to have a clear and identical interface among
the several SOCs. This is not only easier for board developers, but also
removes some nasty #ifdef CONFIG_MX from the drivers.
>>
>> To understand: does a reset mean on the i.MX28 a power off ? Do you turn
>> off the power ? If this is the case, some features are not possible (as
>> PRAM, for example) on this SOC.
>
> This should just reset the chip. No poweroff.
Ok - thanks for clarification.
>
> I'll probably wait for someone to clearly say how this should be to avoid
> reworking it for the fourth time.
Right.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU
2011-09-09 10:29 ` Stefano Babic
@ 2011-09-09 10:50 ` Marek Vasut
2011-09-09 11:04 ` Stefano Babic
0 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-09 10:50 UTC (permalink / raw)
To: u-boot
On Friday, September 09, 2011 12:29:01 PM Stefano Babic wrote:
> On 09/09/2011 12:12 PM, Marek Vasut wrote:
> >> Another general remark here: we tend to have the same structure and the
> >> same files for all IMX SOC. This means that all IMX SOC have a
> >> imx-regs.h that contain the required register definitions (really a
> >> subset what we have in kernel). Is it really necessary to split the
> >> definitions in several small files ?
> >
> > Just like Heiko said ... it'd produce terribly big and messy file. I'd
> > prefer to avoid that.
>
> This is ok, and it is ok also that your imx-regs.h file contains only
> the reg-specific include files. What is not ok, is that you do not use
> imx-regs.h and you still includes each separate file. And as I see, they
> must be included in a specific order.
I patched the reg definition files. This should be solved.
>
> This order must be defined only in imx-regs.h, as you have already done
> and then each driver/board requires to include only imx-regs.h, without
> having to care of the single files.
Ok
>
> > Honestly, I need to check if the file is used at all. We replaced the
> > original driver with pl011 driver.
>
> Ok
>
> >> Again, regarding file splitting for register. If you prefer to have
> >> several files, I think it is better that imx-regs.h include them. Then
> >> we have still a common header imx-regs.h that contains all needed
> >> register definitions. This is a better interface for a board maintainer.
> >
> > Won't it make the compiler slower at compile time if it has to go through
> > all of the included files instead of a subset ?
>
> Well, I do not know if on our Intel-PC this makes a so noticeable
> difference ;-)
It's a point-of-view question, really. But what about people compiling stuff on
slower machines ?
>
> What I remark here, it is to have a clear and identical interface among
> the several SOCs. This is not only easier for board developers, but also
> removes some nasty #ifdef CONFIG_MX from the drivers.
Yes, I understand. btw there's no CONFIG_MX stuff.
>
> >> To understand: does a reset mean on the i.MX28 a power off ? Do you turn
> >> off the power ? If this is the case, some features are not possible (as
> >> PRAM, for example) on this SOC.
> >
> > This should just reset the chip. No poweroff.
>
> Ok - thanks for clarification.
>
> > I'll probably wait for someone to clearly say how this should be to avoid
> > reworking it for the fourth time.
>
> Right.
>
> Best regards,
> Stefano Babic
Cheers
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU
2011-09-09 10:50 ` Marek Vasut
@ 2011-09-09 11:04 ` Stefano Babic
0 siblings, 0 replies; 68+ messages in thread
From: Stefano Babic @ 2011-09-09 11:04 UTC (permalink / raw)
To: u-boot
On 09/09/2011 12:50 PM, Marek Vasut wrote:
>>
>> Well, I do not know if on our Intel-PC this makes a so noticeable
>> difference ;-)
>
> It's a point-of-view question, really. But what about people compiling stuff on
> slower machines ?
Yes, it is a point of view, and surely, compilation time is a drawback.
However, if I compare the advantages between clear interface and
compilation time, I choose the first one.
>> What I remark here, it is to have a clear and identical interface among
>> the several SOCs. This is not only easier for board developers, but also
>> removes some nasty #ifdef CONFIG_MX from the drivers.
>
> Yes, I understand. btw there's no CONFIG_MX stuff.
Not yet, but only because you are adding a new SOC without using IMX
drivers. Things will be changed when the MX23 will be added. Or some
newer SOC of the mxs family will be added by Freescale.
Once we had only the MX31. Drivers were done only for this SOC. After
using the same driver with different SOCs, a lot of CONFIG_MX was added,
and most of code was really not readable - and it tooks time to remove
most of them.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 02/31] iMX28: Add basic support for DENX M28EVK board
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-09 7:13 ` Igor Grinberg
2011-09-09 8:26 ` Stefano Babic
2011-09-08 20:42 ` [U-Boot] [PATCH 03/31] iMX28: Add support for SSP MMC Marek Vasut
` (28 subsequent siblings)
30 siblings, 2 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
This contains support for booting the board and output via DUART.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
MAINTAINERS | 1 +
board/denx/m28evk/Makefile | 49 ++++++++++++++++++++
board/denx/m28evk/m28evk.c | 69 ++++++++++++++++++++++++++++
boards.cfg | 1 +
include/configs/m28evk.h | 108 ++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 228 insertions(+), 0 deletions(-)
create mode 100644 board/denx/m28evk/Makefile
create mode 100644 board/denx/m28evk/m28evk.c
create mode 100644 include/configs/m28evk.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 2f60a60..61a55a8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -847,6 +847,7 @@ Marek Vasut <marek.vasut@gmail.com>
palmtc xscale/pxa
vpac270 xscale/pxa
zipitz2 xscale/pxa
+ m28evk i.MX28
efikamx i.MX51
Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
diff --git a/board/denx/m28evk/Makefile b/board/denx/m28evk/Makefile
new file mode 100644
index 0000000..4037199
--- /dev/null
+++ b/board/denx/m28evk/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := m28evk.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
new file mode 100644
index 0000000..5f4f787
--- /dev/null
+++ b/board/denx/m28evk/m28evk.c
@@ -0,0 +1,69 @@
+/*
+ * DENX M28 module
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/mx28.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Functions
+ */
+int board_early_init_f(void)
+{
+ /* IO0 clock at 480MHz */
+ mx28_set_ioclk(0, 480000);
+ /* IO1 clock at 480MHz */
+ mx28_set_ioclk(1, 480000);
+
+ /* SSP0 clock at 96MHz */
+ mx28_set_sspclk(0, 96000, 0);
+ /* SSP2 clock at 96MHz */
+ mx28_set_sspclk(2, 96000, 0);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Will change it for MX28 EVK later */
+ gd->bd->bi_arch_number = CONFIG_M28_MACHID;
+ /* Adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+ return 0;
+}
diff --git a/boards.cfg b/boards.cfg
index 8a5bfc1..c5d8a90 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -147,6 +147,7 @@ jadecpu arm arm926ejs jadecpu syteco
zmx25 arm arm926ejs zmx25 syteco mx25
imx27lite arm arm926ejs imx27lite logicpd mx27
magnesium arm arm926ejs imx27lite logicpd mx27
+m28evk arm arm926ejs - denx mx28
nhk8815 arm arm926ejs nhk8815 st nomadik
nhk8815_onenand arm arm926ejs nhk8815 st nomadik nhk8815:BOOT_ONENAND
omap5912osk arm arm926ejs - ti omap
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
new file mode 100644
index 0000000..4f41e26
--- /dev/null
+++ b/include/configs/m28evk.h
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __M28_H__
+#define __M28_H__
+
+#include <asm/arch/regs-base.h>
+
+/*
+ * SoC configurations
+ */
+#define CONFIG_MX28 /* i.MX28 SoC */
+#define CONFIG_MX28_TO1_2
+#define CONFIG_SYS_HZ 1000 /* Ticks per second */
+
+#define CONFIG_M28_MACHID MACH_TYPE_M28EVK
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/*
+ * U-Boot Commands
+ */
+#include <config_cmd_default.h>
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_CMD_CACHE
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
+
+/*
+ * Memory configurations
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* 2 banks of DRAM */
+#define PHYS_SDRAM_1 0x40000000 /* Base address */
+#define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */
+#define CONFIG_STACKSIZE 0x00010000 /* 128 KB stack */
+#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */
+#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */
+#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR 0x18000
+#define CONFIG_SYS_TEXT_BASE 0x40000000
+
+/*
+ * U-Boot general configurations
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+ /* Print buffer size */
+#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+ /* Boot argument buffer size */
+#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
+#define CONFIG_AUTO_COMPLETE /* Command auto complete */
+#define CONFIG_CMDLINE_EDITING /* Command history etc */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/*
+ * Serial Driver
+ */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK 24000000
+#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
+#define CONFIG_CONS_INDEX 0
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Boot Linux
+ */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_BOOTARGS "console=ttyAM0,115200n8 "
+#define CONFIG_BOOTCOMMAND "run bootcmd_net"
+#define CONFIG_LOADADDR 0x42000000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_ENV_IS_NOWHERE 1
+
+#endif /* __M28_H__ */
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 02/31] iMX28: Add basic support for DENX M28EVK board
2011-09-08 20:42 ` [U-Boot] [PATCH 02/31] iMX28: Add basic support for DENX M28EVK board Marek Vasut
@ 2011-09-09 7:13 ` Igor Grinberg
2011-09-09 8:26 ` Stefano Babic
1 sibling, 0 replies; 68+ messages in thread
From: Igor Grinberg @ 2011-09-09 7:13 UTC (permalink / raw)
To: u-boot
On 09/08/2011 11:42 PM, Marek Vasut wrote:
> This contains support for booting the board and output via DUART.
>
> Signed-off-by: Marek Vasut<marek.vasut@gmail.com>
> Cc: Stefano Babic<sbabic@denx.de>
> Cc: Wolfgang Denk<wd@denx.de>
> Cc: Detlev Zundel<dzu@denx.de>
> ---
[...]
> diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
> new file mode 100644
> index 0000000..5f4f787
> --- /dev/null
> +++ b/board/denx/m28evk/m28evk.c
[...]
> +
> +int board_init(void)
> +{
> + /* Will change it for MX28 EVK later */
> + gd->bd->bi_arch_number = CONFIG_M28_MACHID;
This should be done in the board config file.
Please, see the CONFIG_MACH_TYPE in the U-Boot documentation (README file).
> + /* Adress of boot parameters */
> + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> +
> + return 0;
> +}
[...]
--
Regards,
Igor.
^ permalink raw reply [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 02/31] iMX28: Add basic support for DENX M28EVK board
2011-09-08 20:42 ` [U-Boot] [PATCH 02/31] iMX28: Add basic support for DENX M28EVK board Marek Vasut
2011-09-09 7:13 ` Igor Grinberg
@ 2011-09-09 8:26 ` Stefano Babic
1 sibling, 0 replies; 68+ messages in thread
From: Stefano Babic @ 2011-09-09 8:26 UTC (permalink / raw)
To: u-boot
On 09/08/2011 10:42 PM, Marek Vasut wrote:
> This contains support for booting the board and output via DUART.
>
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>
> ---
> diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
> new file mode 100644
> index 0000000..5f4f787
> --- /dev/null
> +++ b/board/denx/m28evk/m28evk.c
> @@ -0,0 +1,69 @@
> +/*
> + * DENX M28 module
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/regs-common.h>
> +#include <asm/arch/regs-base.h>
> +#include <asm/arch/regs-clkctrl.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/mx28.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/*
> + * Functions
> + */
> +int board_early_init_f(void)
> +{
> + /* IO0 clock at 480MHz */
> + mx28_set_ioclk(0, 480000);
See comment in previous patch: first argument is only GATE0 or GATE1,
add enum.
> +int board_init(void)
> +{
> + /* Will change it for MX28 EVK later */
> + gd->bd->bi_arch_number = CONFIG_M28_MACHID;
We have recently a new standard here, and the MACH ID is set into the
config file.
> diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
> new file mode 100644
> index 0000000..4f41e26
> --- /dev/null
> +++ b/include/configs/m28evk.h
> @@ -0,0 +1,108 @@
> +/*
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +#ifndef __M28_H__
> +#define __M28_H__
> +
> +#include <asm/arch/regs-base.h>
> +
> +/*
> + * SoC configurations
> + */
> +#define CONFIG_MX28 /* i.MX28 SoC */
> +#define CONFIG_MX28_TO1_2
> +#define CONFIG_SYS_HZ 1000 /* Ticks per second */
> +
> +#define CONFIG_M28_MACHID MACH_TYPE_M28EVK
> +
> +#define CONFIG_SYS_NO_FLASH
> +#define CONFIG_SYS_ICACHE_OFF
> +#define CONFIG_SYS_DCACHE_OFF
> +#define CONFIG_BOARD_EARLY_INIT_F
> +
> +/*
> + * U-Boot Commands
> + */
> +#include <config_cmd_default.h>
> +#define CONFIG_DISPLAY_CPUINFO
> +#define CONFIG_CMD_CACHE
> +#undef CONFIG_CMD_DHCP
> +#undef CONFIG_CMD_NET
> +#undef CONFIG_CMD_NFS
> +#undef CONFIG_CMD_PING
> +#define CONFIG_CMD_SETEXPR
> +
> +/*
> + * Memory configurations
> + */
> +#define CONFIG_NR_DRAM_BANKS 1 /* 2 banks of DRAM */
> +#define PHYS_SDRAM_1 0x40000000 /* Base address */
> +#define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */
> +#define CONFIG_STACKSIZE 0x00010000 /* 128 KB stack */
> +#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */
> +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */
> +#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */
> +#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */
> +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
> +#define CONFIG_SYS_INIT_SP_ADDR 0x18000
> +#define CONFIG_SYS_TEXT_BASE 0x40000000
> +
> +/*
> + * U-Boot general configurations
> + */
> +#define CONFIG_SYS_LONGHELP
> +#define CONFIG_SYS_PROMPT "=> "
> +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
> +#define CONFIG_SYS_PBSIZE \
> + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
> + /* Print buffer size */
> +#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
> +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
> + /* Boot argument buffer size */
> +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
> +#define CONFIG_AUTO_COMPLETE /* Command auto complete */
> +#define CONFIG_CMDLINE_EDITING /* Command history etc */
> +#define CONFIG_SYS_HUSH_PARSER
> +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
> +
> +/*
> + * Serial Driver
> + */
> +#define CONFIG_PL011_SERIAL
> +#define CONFIG_PL011_CLOCK 24000000
> +#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
> +#define CONFIG_CONS_INDEX 0
> +#define CONFIG_BAUDRATE 115200 /* Default baud rate */
> +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
> +
> +/*
> + * Boot Linux
> + */
> +#define CONFIG_CMDLINE_TAG
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_BOOTDELAY 3
> +#define CONFIG_BOOTFILE "uImage"
> +#define CONFIG_BOOTARGS "console=ttyAM0,115200n8 "
> +#define CONFIG_BOOTCOMMAND "run bootcmd_net"
> +#define CONFIG_LOADADDR 0x42000000
> +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> +
> +#define CONFIG_ENV_IS_NOWHERE 1
> +
> +#endif /* __M28_H__ */
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 03/31] iMX28: Add support for SSP MMC
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 01/31] iMX28: Initial support for iMX28 CPU Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 02/31] iMX28: Add basic support for DENX M28EVK board Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 04/31] M28EVK: Enable MMC support Marek Vasut
` (27 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
arch/arm/include/asm/arch-mx28/mx28.h | 2 +
drivers/mmc/Makefile | 1 +
drivers/mmc/mxsmmc.c | 354 +++++++++++++++++++++++++++++++++
3 files changed, 357 insertions(+), 0 deletions(-)
create mode 100644 drivers/mmc/mxsmmc.c
diff --git a/arch/arm/include/asm/arch-mx28/mx28.h b/arch/arm/include/asm/arch-mx28/mx28.h
index a262c05..a226ea4 100644
--- a/arch/arm/include/asm/arch-mx28/mx28.h
+++ b/arch/arm/include/asm/arch-mx28/mx28.h
@@ -27,4 +27,6 @@ int mx28_reset_block(struct mx28_register *reg);
int mx28_wait_mask_set(struct mx28_register *reg, uint32_t mask, int timeout);
int mx28_wait_mask_clr(struct mx28_register *reg, uint32_t mask, int timeout);
+int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int));
+
#endif /* __MX28_H__ */
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 6e94860..550d289 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -36,6 +36,7 @@ COBJS-$(CONFIG_MMC_SPI) += mmc_spi.o
COBJS-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o
COBJS-$(CONFIG_MV_SDHCI) += mv_sdhci.o
COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o
+COBJS-$(CONFIG_MXS_MMC) += mxsmmc.o
COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o
COBJS-$(CONFIG_S5P_MMC) += s5p_mmc.o
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
new file mode 100644
index 0000000..79f793f
--- /dev/null
+++ b/drivers/mmc/mxsmmc.c
@@ -0,0 +1,354 @@
+/*
+ * Freescale i.MX28 SSP MMC driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Terry Lv
+ *
+ * Copyright 2007, Freescale Semiconductor, Inc
+ * Andy Fleming
+ *
+ * Based vaguely on the pxa mmc code:
+ * (C) Copyright 2003
+ * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/regs-ssp.h>
+#include <asm/arch/mx28.h>
+
+struct mxsmmc_priv {
+ int id;
+ struct mx28_ssp_regs *regs;
+ uint32_t clkseq_bypass;
+ uint32_t *clkctrl_ssp;
+ uint32_t buswidth;
+ int (*mmc_is_wp)(int);
+};
+
+#define MXSMMC_MAX_TIMEOUT 10000
+
+/*
+ * Sends a command out on the bus. Takes the mmc pointer,
+ * a command pointer, and an optional data pointer.
+ */
+static int
+mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
+{
+ struct mxsmmc_priv *priv = (struct mxsmmc_priv *)mmc->priv;
+ struct mx28_ssp_regs *ssp_regs = priv->regs;
+ uint32_t reg;
+ int timeout;
+ uint32_t data_count;
+ uint32_t *data_ptr;
+ uint32_t ctrl0;
+
+ debug("MMC%d: CMD%d\n", mmc->block_dev.dev, cmd->cmdidx);
+
+ /* Check bus busy */
+ timeout = MXSMMC_MAX_TIMEOUT;
+ while (--timeout) {
+ udelay(1000);
+ reg = readl(&ssp_regs->hw_ssp_status);
+ if (!(reg &
+ (SSP_STATUS_BUSY | SSP_STATUS_DATA_BUSY |
+ SSP_STATUS_CMD_BUSY))) {
+ break;
+ }
+ }
+
+ if (!timeout) {
+ printf("MMC%d: Bus busy timeout!\n", mmc->block_dev.dev);
+ return TIMEOUT;
+ }
+
+ /* See if card is present */
+ if (readl(&ssp_regs->hw_ssp_status) & SSP_STATUS_CARD_DETECT) {
+ printf("MMC%d: No card detected!\n", mmc->block_dev.dev);
+ return NO_CARD_ERR;
+ }
+
+ /* Start building CTRL0 contents */
+ ctrl0 = priv->buswidth;
+
+ /* Set up command */
+ if (!(cmd->resp_type & MMC_RSP_CRC))
+ ctrl0 |= SSP_CTRL0_IGNORE_CRC;
+ if (cmd->resp_type & MMC_RSP_PRESENT) /* Need to get response */
+ ctrl0 |= SSP_CTRL0_GET_RESP;
+ if (cmd->resp_type & MMC_RSP_136) /* It's a 136 bits response */
+ ctrl0 |= SSP_CTRL0_LONG_RESP;
+
+ /* Command index */
+ reg = readl(&ssp_regs->hw_ssp_cmd0);
+ reg &= ~(SSP_CMD0_CMD_MASK | SSP_CMD0_APPEND_8CYC);
+ reg |= cmd->cmdidx << SSP_CMD0_CMD_OFFSET;
+ if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
+ reg |= SSP_CMD0_APPEND_8CYC;
+ writel(reg, &ssp_regs->hw_ssp_cmd0);
+
+ /* Command argument */
+ writel(cmd->cmdarg, &ssp_regs->hw_ssp_cmd1);
+
+ /* Set up data */
+ if (data) {
+ /* READ or WRITE */
+ if (data->flags & MMC_DATA_READ) {
+ ctrl0 |= SSP_CTRL0_READ;
+ } else if (priv->mmc_is_wp(mmc->block_dev.dev)) {
+ printf("MMC%d: Can not write a locked card!\n",
+ mmc->block_dev.dev);
+ return UNUSABLE_ERR;
+ }
+
+ ctrl0 |= SSP_CTRL0_DATA_XFER;
+ reg = ((data->blocks - 1) <<
+ SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET) |
+ ((ffs(data->blocksize) - 1) <<
+ SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET);
+ writel(reg, &ssp_regs->hw_ssp_block_size);
+
+ reg = data->blocksize * data->blocks;
+ writel(reg, &ssp_regs->hw_ssp_xfer_size);
+ }
+
+ /* Kick off the command */
+ ctrl0 |= SSP_CTRL0_WAIT_FOR_IRQ | SSP_CTRL0_ENABLE | SSP_CTRL0_RUN;
+ writel(ctrl0, &ssp_regs->hw_ssp_ctrl0);
+
+ /* Wait for the command to complete */
+ timeout = MXSMMC_MAX_TIMEOUT;
+ while (--timeout) {
+ udelay(1000);
+ reg = readl(&ssp_regs->hw_ssp_status);
+ if (!(reg & SSP_STATUS_CMD_BUSY))
+ break;
+ }
+
+ if (!timeout) {
+ printf("MMC%d: Command %d busy\n",
+ mmc->block_dev.dev, cmd->cmdidx);
+ return TIMEOUT;
+ }
+
+ /* Check command timeout */
+ if (reg & SSP_STATUS_RESP_TIMEOUT) {
+ printf("MMC%d: Command %d timeout (status 0x%08x)\n",
+ mmc->block_dev.dev, cmd->cmdidx, reg);
+ return TIMEOUT;
+ }
+
+ /* Check command errors */
+ if (reg & (SSP_STATUS_RESP_CRC_ERR | SSP_STATUS_RESP_ERR)) {
+ printf("MMC%d: Command %d error (status 0x%08x)!\n",
+ mmc->block_dev.dev, cmd->cmdidx, reg);
+ return COMM_ERR;
+ }
+
+ /* Copy response to response buffer */
+ if (cmd->resp_type & MMC_RSP_136) {
+ cmd->response[3] = readl(&ssp_regs->hw_ssp_sdresp0);
+ cmd->response[2] = readl(&ssp_regs->hw_ssp_sdresp1);
+ cmd->response[1] = readl(&ssp_regs->hw_ssp_sdresp2);
+ cmd->response[0] = readl(&ssp_regs->hw_ssp_sdresp3);
+ } else
+ cmd->response[0] = readl(&ssp_regs->hw_ssp_sdresp0);
+
+ /* Return if no data to process */
+ if (!data)
+ return 0;
+
+ /* Process the data */
+ data_count = data->blocksize * data->blocks;
+ timeout = MXSMMC_MAX_TIMEOUT;
+ if (data->flags & MMC_DATA_READ) {
+ data_ptr = (uint32_t *)data->dest;
+ while (data_count && --timeout) {
+ reg = readl(&ssp_regs->hw_ssp_status);
+ if (!(reg & SSP_STATUS_FIFO_EMPTY)) {
+ *data_ptr++ = readl(&ssp_regs->hw_ssp_data);
+ data_count -= 4;
+ timeout = MXSMMC_MAX_TIMEOUT;
+ } else
+ udelay(1000);
+ }
+ } else {
+ data_ptr = (uint32_t *)data->src;
+ timeout *= 100;
+ while (data_count && --timeout) {
+ reg = readl(&ssp_regs->hw_ssp_status);
+ if (!(reg & SSP_STATUS_FIFO_FULL)) {
+ writel(*data_ptr++, &ssp_regs->hw_ssp_data);
+ data_count -= 4;
+ timeout = MXSMMC_MAX_TIMEOUT;
+ } else
+ udelay(1000);
+ }
+ }
+
+ if (!timeout) {
+ printf("MMC%d: Data timeout with command %d (status 0x%08x)!\n",
+ mmc->block_dev.dev, cmd->cmdidx, reg);
+ return COMM_ERR;
+ }
+
+ /* Check data errors */
+ reg = readl(&ssp_regs->hw_ssp_status);
+ if (reg &
+ (SSP_STATUS_TIMEOUT | SSP_STATUS_DATA_CRC_ERR |
+ SSP_STATUS_FIFO_OVRFLW | SSP_STATUS_FIFO_UNDRFLW)) {
+ printf("MMC%d: Data error with command %d (status 0x%08x)!\n",
+ mmc->block_dev.dev, cmd->cmdidx, reg);
+ return COMM_ERR;
+ }
+
+ return 0;
+}
+
+static void mxsmmc_set_ios(struct mmc *mmc)
+{
+ struct mxsmmc_priv *priv = (struct mxsmmc_priv *)mmc->priv;
+ struct mx28_ssp_regs *ssp_regs = priv->regs;
+
+ /* Set the clock speed */
+ if (mmc->clock)
+ mx28_set_ssp_busclock(priv->id, mmc->clock / 1000);
+
+ switch (mmc->bus_width) {
+ case 1:
+ priv->buswidth = SSP_CTRL0_BUS_WIDTH_ONE_BIT;
+ break;
+ case 4:
+ priv->buswidth = SSP_CTRL0_BUS_WIDTH_FOUR_BIT;
+ break;
+ case 8:
+ priv->buswidth = SSP_CTRL0_BUS_WIDTH_EIGHT_BIT;
+ break;
+ }
+
+ /* Set the bus width */
+ clrsetbits_le32(&ssp_regs->hw_ssp_ctrl0,
+ SSP_CTRL0_BUS_WIDTH_MASK, priv->buswidth);
+
+ debug("MMC%d: Set %d bits bus width\n",
+ mmc->block_dev.dev, mmc->bus_width);
+}
+
+static int mxsmmc_init(struct mmc *mmc)
+{
+ struct mxsmmc_priv *priv = (struct mxsmmc_priv *)mmc->priv;
+ struct mx28_ssp_regs *ssp_regs = priv->regs;
+
+ /* Reset SSP */
+ mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
+
+ /* 8 bits word length in MMC mode */
+ clrsetbits_le32(&ssp_regs->hw_ssp_ctrl1,
+ SSP_CTRL1_SSP_MODE_MASK | SSP_CTRL1_WORD_LENGTH_MASK,
+ SSP_CTRL1_SSP_MODE_SD_MMC | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS);
+
+ /* Set initial bit clock 400 KHz */
+ mx28_set_ssp_busclock(priv->id, 400);
+
+ /* Send initial 74 clock cycles (185 us @ 400 KHz)*/
+ writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_set);
+ udelay(200);
+ writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_clr);
+
+ return 0;
+}
+
+int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int))
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ struct mmc *mmc = NULL;
+ struct mxsmmc_priv *priv = NULL;
+
+ mmc = malloc(sizeof(struct mmc));
+ if (!mmc)
+ return -ENOMEM;
+
+ priv = malloc(sizeof(struct mxsmmc_priv));
+ if (!priv) {
+ free(mmc);
+ return -ENOMEM;
+ }
+
+ priv->mmc_is_wp = wp;
+ priv->id = id;
+ switch (id) {
+ case 0:
+ priv->regs = (struct mx28_ssp_regs *)MXS_SSP0_BASE;
+ priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP0;
+ priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp0;
+ break;
+ case 1:
+ priv->regs = (struct mx28_ssp_regs *)MXS_SSP1_BASE;
+ priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP1;
+ priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp1;
+ break;
+ case 2:
+ priv->regs = (struct mx28_ssp_regs *)MXS_SSP2_BASE;
+ priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP2;
+ priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp2;
+ break;
+ case 3:
+ priv->regs = (struct mx28_ssp_regs *)MXS_SSP3_BASE;
+ priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP3;
+ priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp3;
+ break;
+ }
+
+ sprintf(mmc->name, "MXS MMC");
+ mmc->send_cmd = mxsmmc_send_cmd;
+ mmc->set_ios = mxsmmc_set_ios;
+ mmc->init = mxsmmc_init;
+ mmc->priv = priv;
+
+ mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT |
+ MMC_MODE_HS_52MHz | MMC_MODE_HS;
+
+ /*
+ * SSPCLK = 480 * 18 / 29 / 1 = 297.731 MHz
+ * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)),
+ * CLOCK_DIVIDE has to be an even value from 2 to 254, and
+ * CLOCK_RATE could be any integer from 0 to 255.
+ */
+ mmc->f_min = 400000;
+ mmc->f_max = mx28_get_sspclk(id) * 1000 / 2;
+ mmc->b_max = 0;
+
+ mmc_register(mmc);
+ return 0;
+}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 04/31] M28EVK: Enable MMC support
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (2 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 03/31] iMX28: Add support for SSP MMC Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-09 8:28 ` Stefano Babic
2011-09-08 20:42 ` [U-Boot] [PATCH 05/31] iMX28: Add pinctrl and ocotp register definitions Marek Vasut
` (26 subsequent siblings)
30 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
board/denx/m28evk/m28evk.c | 22 ++++++++++++++++++++++
include/configs/m28evk.h | 14 ++++++++++++++
2 files changed, 36 insertions(+), 0 deletions(-)
diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
index 5f4f787..d3e6173 100644
--- a/board/denx/m28evk/m28evk.c
+++ b/board/denx/m28evk/m28evk.c
@@ -28,6 +28,8 @@
#include <asm/arch/regs-common.h>
#include <asm/arch/regs-base.h>
#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/gpio.h>
#include <asm/arch/clock.h>
#include <asm/arch/mx28.h>
@@ -67,3 +69,23 @@ int dram_init(void)
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
return 0;
}
+
+#ifdef CONFIG_CMD_MMC
+static int m28_mmc_wp(int id)
+{
+ if (id != 0) {
+ printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
+ return 1;
+ }
+
+ return mxs_gpio_get(MX28_PAD_AUART2_CTS__GPIO_3_10);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ /* Configure WP as output */
+ mxs_gpio_direction(MX28_PAD_AUART2_CTS__GPIO_3_10, 0);
+
+ return mxsmmc_initialize(bis, 0, m28_mmc_wp);
+}
+#endif
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 4f41e26..1b4db7b 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -41,7 +41,12 @@
*/
#include <config_cmd_default.h>
#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
+
#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_MMC
#undef CONFIG_CMD_DHCP
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
@@ -92,6 +97,15 @@
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
+ * MMC Driver
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MXS_MMC
+#endif
+
+/*
* Boot Linux
*/
#define CONFIG_CMDLINE_TAG
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 04/31] M28EVK: Enable MMC support
2011-09-08 20:42 ` [U-Boot] [PATCH 04/31] M28EVK: Enable MMC support Marek Vasut
@ 2011-09-09 8:28 ` Stefano Babic
0 siblings, 0 replies; 68+ messages in thread
From: Stefano Babic @ 2011-09-09 8:28 UTC (permalink / raw)
To: u-boot
On 09/08/2011 10:42 PM, Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Andy Fleming <afleming@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>
> ---
> board/denx/m28evk/m28evk.c | 22 ++++++++++++++++++++++
> include/configs/m28evk.h | 14 ++++++++++++++
> 2 files changed, 36 insertions(+), 0 deletions(-)
This is a new code. Please squash your patches regarding m28evk, so that
we can review the m28evk easier.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 05/31] iMX28: Add pinctrl and ocotp register definitions
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (3 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 04/31] M28EVK: Enable MMC support Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-09 8:30 ` Stefano Babic
2011-09-08 20:42 ` [U-Boot] [PATCH 06/31] FEC: Add support for iMX28 quirks Marek Vasut
` (25 subsequent siblings)
30 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
arch/arm/include/asm/arch-mx28/regs-ocotp.h | 169 ++++
arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 1280 +++++++++++++++++++++++++
2 files changed, 1449 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/asm/arch-mx28/regs-ocotp.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-pinctrl.h
diff --git a/arch/arm/include/asm/arch-mx28/regs-ocotp.h b/arch/arm/include/asm/arch-mx28/regs-ocotp.h
new file mode 100644
index 0000000..49d2e42
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-ocotp.h
@@ -0,0 +1,169 @@
+/*
+ * Freescale i.MX28 OCOTP Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_OCOTP_H__
+#define __REGS_OCOTP_H__
+
+struct mx28_ocotp_regs {
+ mx28_reg(hw_ocotp_ctrl) /* 0x0 */
+ mx28_reg(hw_ocotp_data) /* 0x10 */
+ mx28_reg(hw_ocotp_cust0) /* 0x20 */
+ mx28_reg(hw_ocotp_cust1) /* 0x30 */
+ mx28_reg(hw_ocotp_cust2) /* 0x40 */
+ mx28_reg(hw_ocotp_cust3) /* 0x50 */
+ mx28_reg(hw_ocotp_crypto0) /* 0x60 */
+ mx28_reg(hw_ocotp_crypto1) /* 0x70 */
+ mx28_reg(hw_ocotp_crypto2) /* 0x80 */
+ mx28_reg(hw_ocotp_crypto3) /* 0x90 */
+ mx28_reg(hw_ocotp_hwcap0) /* 0xa0 */
+ mx28_reg(hw_ocotp_hwcap1) /* 0xb0 */
+ mx28_reg(hw_ocotp_hwcap2) /* 0xc0 */
+ mx28_reg(hw_ocotp_hwcap3) /* 0xd0 */
+ mx28_reg(hw_ocotp_hwcap4) /* 0xe0 */
+ mx28_reg(hw_ocotp_hwcap5) /* 0xf0 */
+ mx28_reg(hw_ocotp_swcap) /* 0x100 */
+ mx28_reg(hw_ocotp_custcap) /* 0x110 */
+ mx28_reg(hw_ocotp_lock) /* 0x120 */
+ mx28_reg(hw_ocotp_ops0) /* 0x130 */
+ mx28_reg(hw_ocotp_ops1) /* 0x140 */
+ mx28_reg(hw_ocotp_ops2) /* 0x150 */
+ mx28_reg(hw_ocotp_ops3) /* 0x160 */
+ mx28_reg(hw_ocotp_un0) /* 0x170 */
+ mx28_reg(hw_ocotp_un1) /* 0x180 */
+ mx28_reg(hw_ocotp_un2) /* 0x190 */
+ mx28_reg(hw_ocotp_rom0) /* 0x1a0 */
+ mx28_reg(hw_ocotp_rom1) /* 0x1b0 */
+ mx28_reg(hw_ocotp_rom2) /* 0x1c0 */
+ mx28_reg(hw_ocotp_rom3) /* 0x1d0 */
+ mx28_reg(hw_ocotp_rom4) /* 0x1e0 */
+ mx28_reg(hw_ocotp_rom5) /* 0x1f0 */
+ mx28_reg(hw_ocotp_rom6) /* 0x200 */
+ mx28_reg(hw_ocotp_rom7) /* 0x210 */
+ mx28_reg(hw_ocotp_srk0) /* 0x220 */
+ mx28_reg(hw_ocotp_srk1) /* 0x230 */
+ mx28_reg(hw_ocotp_srk2) /* 0x240 */
+ mx28_reg(hw_ocotp_srk3) /* 0x250 */
+ mx28_reg(hw_ocotp_srk4) /* 0x260 */
+ mx28_reg(hw_ocotp_srk5) /* 0x270 */
+ mx28_reg(hw_ocotp_srk6) /* 0x280 */
+ mx28_reg(hw_ocotp_srk7) /* 0x290 */
+ mx28_reg(hw_ocotp_version) /* 0x2a0 */
+};
+
+#define OCOTP_CTRL_WR_UNLOCK_MASK (0xffff << 16)
+#define OCOTP_CTRL_WR_UNLOCK_OFFSET 16
+#define OCOTP_CTRL_WR_UNLOCK_KEY (0x3e77 << 16)
+#define OCOTP_CTRL_RELOAD_SHADOWS (1 << 13)
+#define OCOTP_CTRL_RD_BANK_OPEN (1 << 12)
+#define OCOTP_CTRL_ERROR (1 << 9)
+#define OCOTP_CTRL_BUSY (1 << 8)
+#define OCOTP_CTRL_ADDR_MASK 0x3f
+#define OCOTP_CTRL_ADDR_OFFSET 0
+
+#define OCOTP_DATA_DATA_MASK 0xffffffff
+#define OCOTP_DATA_DATA_OFFSET 0
+
+#define OCOTP_CUST_BITS_MASK 0xffffffff
+#define OCOTP_CUST_BITS_OFFSET 0
+
+#define OCOTP_CRYPTO_BITS_MASK 0xffffffff
+#define OCOTP_CRYPTO_BITS_OFFSET 0
+
+#define OCOTP_HWCAP_BITS_MASK 0xffffffff
+#define OCOTP_HWCAP_BITS_OFFSET 0
+
+#define OCOTP_SWCAP_BITS_MASK 0xffffffff
+#define OCOTP_SWCAP_BITS_OFFSET 0
+
+#define OCOTP_CUSTCAP_RTC_XTAL_32768_PRESENT (1 << 2)
+#define OCOTP_CUSTCAP_RTC_XTAL_32000_PRESENT (1 << 1)
+
+#define OCOTP_LOCK_ROM7 (1 << 31)
+#define OCOTP_LOCK_ROM6 (1 << 30)
+#define OCOTP_LOCK_ROM5 (1 << 29)
+#define OCOTP_LOCK_ROM4 (1 << 28)
+#define OCOTP_LOCK_ROM3 (1 << 27)
+#define OCOTP_LOCK_ROM2 (1 << 26)
+#define OCOTP_LOCK_ROM1 (1 << 25)
+#define OCOTP_LOCK_ROM0 (1 << 24)
+#define OCOTP_LOCK_HWSW_SHADOW_ALT (1 << 23)
+#define OCOTP_LOCK_CRYPTODCP_ALT (1 << 22)
+#define OCOTP_LOCK_CRYPTOKEY_ALT (1 << 21)
+#define OCOTP_LOCK_PIN (1 << 20)
+#define OCOTP_LOCK_OPS (1 << 19)
+#define OCOTP_LOCK_UN2 (1 << 18)
+#define OCOTP_LOCK_UN1 (1 << 17)
+#define OCOTP_LOCK_UN0 (1 << 16)
+#define OCOTP_LOCK_SRK (1 << 15)
+#define OCOTP_LOCK_UNALLOCATED_MASK (0x7 << 12)
+#define OCOTP_LOCK_UNALLOCATED_OFFSET 12
+#define OCOTP_LOCK_SRK_SHADOW (1 << 11)
+#define OCOTP_LOCK_ROM_SHADOW (1 << 10)
+#define OCOTP_LOCK_CUSTCAP (1 << 9)
+#define OCOTP_LOCK_HWSW (1 << 8)
+#define OCOTP_LOCK_CUSTCAP_SHADOW (1 << 7)
+#define OCOTP_LOCK_HWSW_SHADOW (1 << 6)
+#define OCOTP_LOCK_CRYPTODCP (1 << 5)
+#define OCOTP_LOCK_CRYPTOKEY (1 << 4)
+#define OCOTP_LOCK_CUST3 (1 << 3)
+#define OCOTP_LOCK_CUST2 (1 << 2)
+#define OCOTP_LOCK_CUST1 (1 << 1)
+#define OCOTP_LOCK_CUST0 (1 << 0)
+
+#define OCOTP_OPS_BITS_MASK 0xffffffff
+#define OCOTP_OPS_BITS_OFFSET 0
+
+#define OCOTP_UN_BITS_MASK 0xffffffff
+#define OCOTP_UN_BITS_OFFSET 0
+
+#define OCOTP_ROM_BOOT_MODE_MASK (0xff << 24)
+#define OCOTP_ROM_BOOT_MODE_OFFSET 24
+#define OCOTP_ROM_SD_MMC_MODE_MASK (0x3 << 22)
+#define OCOTP_ROM_SD_MMC_MODE_OFFSET 22
+#define OCOTP_ROM_SD_POWER_GATE_GPIO_MASK (0x3 << 20)
+#define OCOTP_ROM_SD_POWER_GATE_GPIO_OFFSET 20
+#define OCOTP_ROM_SD_POWER_UP_DELAY_MASK (0x3f << 14)
+#define OCOTP_ROM_SD_POWER_UP_DELAY_OFFSET 14
+#define OCOTP_ROM_SD_BUS_WIDTH_MASK (0x3 << 12)
+#define OCOTP_ROM_SD_BUS_WIDTH_OFFSET 12
+#define OCOTP_ROM_SSP_SCK_INDEX_MASK (0xf << 8)
+#define OCOTP_ROM_SSP_SCK_INDEX_OFFSET 8
+#define OCOTP_ROM_EMMC_USE_DDR (1 << 7)
+#define OCOTP_ROM_DISABLE_SPI_NOR_FAST_READ (1 << 6)
+#define OCOTP_ROM_ENABLE_USB_BOOT_SERIAL_NUM (1 << 5)
+#define OCOTP_ROM_ENABLE_UNENCRYPTED_BOOT (1 << 4)
+#define OCOTP_ROM_SD_MBR_BOOT (1 << 3)
+
+#define OCOTP_SRK_BITS_MASK 0xffffffff
+#define OCOTP_SRK_BITS_OFFSET 0
+
+#define OCOTP_VERSION_MAJOR_MASK (0xff << 24)
+#define OCOTP_VERSION_MAJOR_OFFSET 24
+#define OCOTP_VERSION_MINOR_MASK (0xff << 16)
+#define OCOTP_VERSION_MINOR_OFFSET 16
+#define OCOTP_VERSION_STEP_MASK 0xffff
+#define OCOTP_VERSION_STEP_OFFSET 0
+
+#endif /* __REGS_OCOTP_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-pinctrl.h b/arch/arm/include/asm/arch-mx28/regs-pinctrl.h
new file mode 100644
index 0000000..cfe4e97
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-pinctrl.h
@@ -0,0 +1,1280 @@
+/*
+ * Freescale i.MX28 PINCTRL Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_PINCTRL_H__
+#define __REGS_PINCTRL_H__
+
+struct mx28_pinctrl_regs {
+ mx28_reg(hw_pinctrl_ctrl) /* 0x0 */
+
+ uint32_t reserved1[60];
+
+ mx28_reg(hw_pinctrl_muxsel0) /* 0x100 */
+ mx28_reg(hw_pinctrl_muxsel1) /* 0x110 */
+ mx28_reg(hw_pinctrl_muxsel2) /* 0x120 */
+ mx28_reg(hw_pinctrl_muxsel3) /* 0x130 */
+ mx28_reg(hw_pinctrl_muxsel4) /* 0x140 */
+ mx28_reg(hw_pinctrl_muxsel5) /* 0x150 */
+ mx28_reg(hw_pinctrl_muxsel6) /* 0x160 */
+ mx28_reg(hw_pinctrl_muxsel7) /* 0x170 */
+ mx28_reg(hw_pinctrl_muxsel8) /* 0x180 */
+ mx28_reg(hw_pinctrl_muxsel9) /* 0x190 */
+ mx28_reg(hw_pinctrl_muxsel10) /* 0x1a0 */
+ mx28_reg(hw_pinctrl_muxsel11) /* 0x1b0 */
+ mx28_reg(hw_pinctrl_muxsel12) /* 0x1c0 */
+ mx28_reg(hw_pinctrl_muxsel13) /* 0x1d0 */
+
+ uint32_t reserved2[72];
+
+ mx28_reg(hw_pinctrl_drive0) /* 0x300 */
+ mx28_reg(hw_pinctrl_drive1) /* 0x310 */
+ mx28_reg(hw_pinctrl_drive2) /* 0x320 */
+ mx28_reg(hw_pinctrl_drive3) /* 0x330 */
+ mx28_reg(hw_pinctrl_drive4) /* 0x340 */
+ mx28_reg(hw_pinctrl_drive5) /* 0x350 */
+ mx28_reg(hw_pinctrl_drive6) /* 0x360 */
+ mx28_reg(hw_pinctrl_drive7) /* 0x370 */
+ mx28_reg(hw_pinctrl_drive8) /* 0x380 */
+ mx28_reg(hw_pinctrl_drive9) /* 0x390 */
+ mx28_reg(hw_pinctrl_drive10) /* 0x3a0 */
+ mx28_reg(hw_pinctrl_drive11) /* 0x3b0 */
+ mx28_reg(hw_pinctrl_drive12) /* 0x3c0 */
+ mx28_reg(hw_pinctrl_drive13) /* 0x3d0 */
+ mx28_reg(hw_pinctrl_drive14) /* 0x3e0 */
+ mx28_reg(hw_pinctrl_drive15) /* 0x3f0 */
+ mx28_reg(hw_pinctrl_drive16) /* 0x400 */
+ mx28_reg(hw_pinctrl_drive17) /* 0x410 */
+ mx28_reg(hw_pinctrl_drive18) /* 0x420 */
+ mx28_reg(hw_pinctrl_drive19) /* 0x430 */
+
+ uint32_t reserved3[112];
+
+ mx28_reg(hw_pinctrl_pull0) /* 0x600 */
+ mx28_reg(hw_pinctrl_pull1) /* 0x610 */
+ mx28_reg(hw_pinctrl_pull2) /* 0x620 */
+ mx28_reg(hw_pinctrl_pull3) /* 0x630 */
+ mx28_reg(hw_pinctrl_pull4) /* 0x640 */
+ mx28_reg(hw_pinctrl_pull5) /* 0x650 */
+ mx28_reg(hw_pinctrl_pull6) /* 0x660 */
+
+ uint32_t reserved4[36];
+
+ mx28_reg(hw_pinctrl_dout0) /* 0x700 */
+ mx28_reg(hw_pinctrl_dout1) /* 0x710 */
+ mx28_reg(hw_pinctrl_dout2) /* 0x720 */
+ mx28_reg(hw_pinctrl_dout3) /* 0x730 */
+ mx28_reg(hw_pinctrl_dout4) /* 0x740 */
+
+ uint32_t reserved5[108];
+
+ mx28_reg(hw_pinctrl_din0) /* 0x900 */
+ mx28_reg(hw_pinctrl_din1) /* 0x910 */
+ mx28_reg(hw_pinctrl_din2) /* 0x920 */
+ mx28_reg(hw_pinctrl_din3) /* 0x930 */
+ mx28_reg(hw_pinctrl_din4) /* 0x940 */
+
+ uint32_t reserved6[108];
+
+ mx28_reg(hw_pinctrl_doe0) /* 0xb00 */
+ mx28_reg(hw_pinctrl_doe1) /* 0xb10 */
+ mx28_reg(hw_pinctrl_doe2) /* 0xb20 */
+ mx28_reg(hw_pinctrl_doe3) /* 0xb30 */
+ mx28_reg(hw_pinctrl_doe4) /* 0xb40 */
+
+ uint32_t reserved7[300];
+
+ mx28_reg(hw_pinctrl_pin2irq0) /* 0x1000 */
+ mx28_reg(hw_pinctrl_pin2irq1) /* 0x1010 */
+ mx28_reg(hw_pinctrl_pin2irq2) /* 0x1020 */
+ mx28_reg(hw_pinctrl_pin2irq3) /* 0x1030 */
+ mx28_reg(hw_pinctrl_pin2irq4) /* 0x1040 */
+
+ uint32_t reserved8[44];
+
+ mx28_reg(hw_pinctrl_irqen0) /* 0x1100 */
+ mx28_reg(hw_pinctrl_irqen1) /* 0x1110 */
+ mx28_reg(hw_pinctrl_irqen2) /* 0x1120 */
+ mx28_reg(hw_pinctrl_irqen3) /* 0x1130 */
+ mx28_reg(hw_pinctrl_irqen4) /* 0x1140 */
+
+ uint32_t reserved9[44];
+
+ mx28_reg(hw_pinctrl_irqlevel0) /* 0x1200 */
+ mx28_reg(hw_pinctrl_irqlevel1) /* 0x1210 */
+ mx28_reg(hw_pinctrl_irqlevel2) /* 0x1220 */
+ mx28_reg(hw_pinctrl_irqlevel3) /* 0x1230 */
+ mx28_reg(hw_pinctrl_irqlevel4) /* 0x1240 */
+
+ uint32_t reserved10[44];
+
+ mx28_reg(hw_pinctrl_irqpol0) /* 0x1300 */
+ mx28_reg(hw_pinctrl_irqpol1) /* 0x1310 */
+ mx28_reg(hw_pinctrl_irqpol2) /* 0x1320 */
+ mx28_reg(hw_pinctrl_irqpol3) /* 0x1330 */
+ mx28_reg(hw_pinctrl_irqpol4) /* 0x1340 */
+
+ uint32_t reserved11[44];
+
+ mx28_reg(hw_pinctrl_irqstat0) /* 0x1400 */
+ mx28_reg(hw_pinctrl_irqstat1) /* 0x1410 */
+ mx28_reg(hw_pinctrl_irqstat2) /* 0x1420 */
+ mx28_reg(hw_pinctrl_irqstat3) /* 0x1430 */
+ mx28_reg(hw_pinctrl_irqstat4) /* 0x1440 */
+
+ uint32_t reserved12[380];
+
+ mx28_reg(hw_pinctrl_emi_odt_ctrl) /* 0x1a40 */
+
+ uint32_t reserved13[76];
+
+ mx28_reg(hw_pinctrl_emi_ds_ctrl) /* 0x1b80 */
+};
+
+#define PINCTRL_CTRL_SFTRST (1 << 31)
+#define PINCTRL_CTRL_CLKGATE (1 << 30)
+#define PINCTRL_CTRL_PRESENT4 (1 << 24)
+#define PINCTRL_CTRL_PRESENT3 (1 << 23)
+#define PINCTRL_CTRL_PRESENT2 (1 << 22)
+#define PINCTRL_CTRL_PRESENT1 (1 << 21)
+#define PINCTRL_CTRL_PRESENT0 (1 << 20)
+#define PINCTRL_CTRL_IRQOUT4 (1 << 4)
+#define PINCTRL_CTRL_IRQOUT3 (1 << 3)
+#define PINCTRL_CTRL_IRQOUT2 (1 << 2)
+#define PINCTRL_CTRL_IRQOUT1 (1 << 1)
+#define PINCTRL_CTRL_IRQOUT0 (1 << 0)
+
+#define PINCTRL_MUXSEL0_BANK0_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL0_BANK0_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL0_BANK0_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL0_BANK0_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL0_BANK0_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL0_BANK0_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL0_BANK0_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL0_BANK0_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL0_BANK0_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL0_BANK0_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL0_BANK0_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL0_BANK0_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL0_BANK0_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL0_BANK0_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL0_BANK0_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL0_BANK0_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL1_BANK0_PIN28_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL1_BANK0_PIN28_OFFSET 24
+#define PINCTRL_MUXSEL1_BANK0_PIN27_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL1_BANK0_PIN27_OFFSET 22
+#define PINCTRL_MUXSEL1_BANK0_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL1_BANK0_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL1_BANK0_PIN25_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL1_BANK0_PIN25_OFFSET 18
+#define PINCTRL_MUXSEL1_BANK0_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL1_BANK0_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL1_BANK0_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL1_BANK0_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL1_BANK0_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL1_BANK0_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL1_BANK0_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL1_BANK0_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL1_BANK0_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL1_BANK0_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL1_BANK0_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL1_BANK0_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL1_BANK0_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL1_BANK0_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL1_BANK0_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL1_BANK0_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL1_BANK0_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL1_BANK0_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL2_BANK1_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL2_BANK1_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL2_BANK1_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL2_BANK1_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL2_BANK1_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL2_BANK1_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL2_BANK1_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL2_BANK1_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL2_BANK1_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL2_BANK1_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL2_BANK1_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL2_BANK1_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL2_BANK1_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL2_BANK1_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL2_BANK1_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL2_BANK1_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL2_BANK1_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL2_BANK1_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL2_BANK1_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL2_BANK1_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL2_BANK1_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL2_BANK1_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL2_BANK1_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL2_BANK1_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL2_BANK1_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL2_BANK1_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL2_BANK1_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL2_BANK1_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL2_BANK1_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL2_BANK1_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL2_BANK1_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL2_BANK1_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL3_BANK1_PIN31_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL3_BANK1_PIN31_OFFSET 30
+#define PINCTRL_MUXSEL3_BANK1_PIN30_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL3_BANK1_PIN30_OFFSET 28
+#define PINCTRL_MUXSEL3_BANK1_PIN29_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL3_BANK1_PIN29_OFFSET 26
+#define PINCTRL_MUXSEL3_BANK1_PIN28_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL3_BANK1_PIN28_OFFSET 24
+#define PINCTRL_MUXSEL3_BANK1_PIN27_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL3_BANK1_PIN27_OFFSET 22
+#define PINCTRL_MUXSEL3_BANK1_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL3_BANK1_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL3_BANK1_PIN25_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL3_BANK1_PIN25_OFFSET 18
+#define PINCTRL_MUXSEL3_BANK1_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL3_BANK1_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL3_BANK1_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL3_BANK1_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL3_BANK1_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL3_BANK1_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL3_BANK1_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL3_BANK1_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL3_BANK1_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL3_BANK1_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL3_BANK1_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL3_BANK1_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL3_BANK1_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL3_BANK1_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL3_BANK1_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL3_BANK1_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL3_BANK1_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL3_BANK1_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL4_BANK2_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL4_BANK2_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL4_BANK2_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL4_BANK2_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL4_BANK2_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL4_BANK2_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL4_BANK2_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL4_BANK2_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL4_BANK2_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL4_BANK2_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL4_BANK2_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL4_BANK2_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL4_BANK2_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL4_BANK2_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL4_BANK2_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL4_BANK2_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL4_BANK2_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL4_BANK2_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL4_BANK2_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL4_BANK2_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL4_BANK2_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL4_BANK2_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL4_BANK2_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL4_BANK2_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL4_BANK2_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL4_BANK2_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL4_BANK2_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL4_BANK2_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL4_BANK2_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL4_BANK2_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL5_BANK2_PIN27_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL5_BANK2_PIN27_OFFSET 22
+#define PINCTRL_MUXSEL5_BANK2_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL5_BANK2_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL5_BANK2_PIN25_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL5_BANK2_PIN25_OFFSET 18
+#define PINCTRL_MUXSEL5_BANK2_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL5_BANK2_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL5_BANK2_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL5_BANK2_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL5_BANK2_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL5_BANK2_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL5_BANK2_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL5_BANK2_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL5_BANK2_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL5_BANK2_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL5_BANK2_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL5_BANK2_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL5_BANK2_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL5_BANK2_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL6_BANK3_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL6_BANK3_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL6_BANK3_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL6_BANK3_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL6_BANK3_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL6_BANK3_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL6_BANK3_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL6_BANK3_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL6_BANK3_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL6_BANK3_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL6_BANK3_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL6_BANK3_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL6_BANK3_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL6_BANK3_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL6_BANK3_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL6_BANK3_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL6_BANK3_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL6_BANK3_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL6_BANK3_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL6_BANK3_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL6_BANK3_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL6_BANK3_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL6_BANK3_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL6_BANK3_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL6_BANK3_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL6_BANK3_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL6_BANK3_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL6_BANK3_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL6_BANK3_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL6_BANK3_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL6_BANK3_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL6_BANK3_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL7_BANK3_PIN30_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL7_BANK3_PIN30_OFFSET 28
+#define PINCTRL_MUXSEL7_BANK3_PIN29_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL7_BANK3_PIN29_OFFSET 26
+#define PINCTRL_MUXSEL7_BANK3_PIN28_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL7_BANK3_PIN28_OFFSET 24
+#define PINCTRL_MUXSEL7_BANK3_PIN27_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL7_BANK3_PIN27_OFFSET 22
+#define PINCTRL_MUXSEL7_BANK3_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL7_BANK3_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL7_BANK3_PIN25_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL7_BANK3_PIN25_OFFSET 18
+#define PINCTRL_MUXSEL7_BANK3_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL7_BANK3_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL7_BANK3_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL7_BANK3_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL7_BANK3_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL7_BANK3_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL7_BANK3_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL7_BANK3_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL7_BANK3_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL7_BANK3_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL7_BANK3_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL7_BANK3_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL7_BANK3_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL7_BANK3_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL7_BANK3_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL7_BANK3_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL8_BANK4_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL8_BANK4_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL8_BANK4_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL8_BANK4_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL8_BANK4_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL8_BANK4_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL8_BANK4_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL8_BANK4_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL8_BANK4_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL8_BANK4_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL8_BANK4_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL8_BANK4_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL8_BANK4_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL8_BANK4_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL8_BANK4_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL8_BANK4_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL8_BANK4_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL8_BANK4_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL8_BANK4_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL8_BANK4_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL8_BANK4_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL8_BANK4_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL8_BANK4_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL8_BANK4_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL8_BANK4_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL8_BANK4_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL8_BANK4_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL8_BANK4_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL8_BANK4_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL8_BANK4_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL8_BANK4_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL8_BANK4_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL9_BANK4_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL9_BANK4_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL9_BANK4_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL9_BANK4_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL10_BANK5_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL10_BANK5_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL10_BANK5_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL10_BANK5_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL10_BANK5_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL10_BANK5_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL10_BANK5_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL10_BANK5_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL10_BANK5_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL10_BANK5_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL10_BANK5_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL10_BANK5_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL10_BANK5_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL10_BANK5_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL10_BANK5_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL10_BANK5_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL10_BANK5_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL10_BANK5_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL10_BANK5_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL10_BANK5_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL10_BANK5_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL10_BANK5_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL10_BANK5_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL10_BANK5_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL10_BANK5_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL10_BANK5_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL10_BANK5_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL10_BANK5_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL10_BANK5_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL10_BANK5_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL10_BANK5_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL10_BANK5_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL11_BANK5_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL11_BANK5_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL11_BANK5_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL11_BANK5_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL11_BANK5_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL11_BANK5_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL11_BANK5_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL11_BANK5_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL11_BANK5_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL11_BANK5_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL11_BANK5_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL11_BANK5_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL11_BANK5_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL11_BANK5_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL11_BANK5_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL11_BANK5_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL11_BANK5_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL11_BANK5_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL12_BANK6_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL12_BANK6_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL12_BANK6_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL12_BANK6_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL12_BANK6_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL12_BANK6_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL12_BANK6_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL12_BANK6_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL12_BANK6_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL12_BANK6_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL12_BANK6_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL12_BANK6_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL12_BANK6_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL12_BANK6_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL12_BANK6_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL12_BANK6_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL12_BANK6_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL12_BANK6_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL12_BANK6_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL12_BANK6_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL12_BANK6_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL12_BANK6_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL12_BANK6_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL12_BANK6_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL12_BANK6_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL12_BANK6_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL12_BANK6_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL12_BANK6_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL12_BANK6_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL12_BANK6_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL13_BANK6_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL13_BANK6_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL13_BANK6_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL13_BANK6_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL13_BANK6_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL13_BANK6_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL13_BANK6_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL13_BANK6_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL13_BANK6_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL13_BANK6_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL13_BANK6_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL13_BANK6_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL13_BANK6_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL13_BANK6_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL13_BANK6_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL13_BANK6_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL13_BANK6_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL13_BANK6_PIN16_OFFSET 0
+
+#define PINCTRL_DRIVE0_BANK0_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE0_BANK0_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE0_BANK0_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE0_BANK0_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE0_BANK0_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE0_BANK0_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE0_BANK0_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE0_BANK0_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE0_BANK0_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE0_BANK0_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE0_BANK0_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE0_BANK0_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE0_BANK0_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE0_BANK0_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE0_BANK0_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE0_BANK0_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE0_BANK0_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE0_BANK0_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE0_BANK0_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE0_BANK0_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE0_BANK0_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE0_BANK0_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE0_BANK0_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE0_BANK0_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE2_BANK0_PIN23_V (1 << 30)
+#define PINCTRL_DRIVE2_BANK0_PIN23_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE2_BANK0_PIN23_MA_OFFSET 28
+#define PINCTRL_DRIVE2_BANK0_PIN22_V (1 << 26)
+#define PINCTRL_DRIVE2_BANK0_PIN22_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE2_BANK0_PIN22_MA_OFFSET 24
+#define PINCTRL_DRIVE2_BANK0_PIN21_V (1 << 22)
+#define PINCTRL_DRIVE2_BANK0_PIN21_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE2_BANK0_PIN21_MA_OFFSET 20
+#define PINCTRL_DRIVE2_BANK0_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE2_BANK0_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE2_BANK0_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE2_BANK0_PIN19_V (1 << 14)
+#define PINCTRL_DRIVE2_BANK0_PIN19_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE2_BANK0_PIN19_MA_OFFSET 12
+#define PINCTRL_DRIVE2_BANK0_PIN18_V (1 << 10)
+#define PINCTRL_DRIVE2_BANK0_PIN18_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE2_BANK0_PIN18_MA_OFFSET 8
+#define PINCTRL_DRIVE2_BANK0_PIN17_V (1 << 6)
+#define PINCTRL_DRIVE2_BANK0_PIN17_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE2_BANK0_PIN17_MA_OFFSET 4
+#define PINCTRL_DRIVE2_BANK0_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE2_BANK0_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE2_BANK0_PIN16_MA_OFFSET 0
+
+#define PINCTRL_DRIVE3_BANK0_PIN28_V (1 << 18)
+#define PINCTRL_DRIVE3_BANK0_PIN28_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE3_BANK0_PIN28_MA_OFFSET 16
+#define PINCTRL_DRIVE3_BANK0_PIN27_V (1 << 14)
+#define PINCTRL_DRIVE3_BANK0_PIN27_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE3_BANK0_PIN27_MA_OFFSET 12
+#define PINCTRL_DRIVE3_BANK0_PIN26_V (1 << 10)
+#define PINCTRL_DRIVE3_BANK0_PIN26_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE3_BANK0_PIN26_MA_OFFSET 8
+#define PINCTRL_DRIVE3_BANK0_PIN25_V (1 << 6)
+#define PINCTRL_DRIVE3_BANK0_PIN25_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE3_BANK0_PIN25_MA_OFFSET 4
+#define PINCTRL_DRIVE3_BANK0_PIN24_V (1 << 2)
+#define PINCTRL_DRIVE3_BANK0_PIN24_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE3_BANK0_PIN24_MA_OFFSET 0
+
+#define PINCTRL_DRIVE4_BANK1_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE4_BANK1_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE4_BANK1_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE4_BANK1_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE4_BANK1_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE4_BANK1_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE4_BANK1_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE4_BANK1_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE4_BANK1_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE4_BANK1_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE4_BANK1_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE4_BANK1_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE4_BANK1_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE4_BANK1_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE4_BANK1_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE4_BANK1_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE4_BANK1_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE4_BANK1_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE4_BANK1_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE4_BANK1_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE4_BANK1_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE4_BANK1_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE4_BANK1_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE4_BANK1_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE5_BANK1_PIN15_V (1 << 30)
+#define PINCTRL_DRIVE5_BANK1_PIN15_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE5_BANK1_PIN15_MA_OFFSET 28
+#define PINCTRL_DRIVE5_BANK1_PIN14_V (1 << 26)
+#define PINCTRL_DRIVE5_BANK1_PIN14_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE5_BANK1_PIN14_MA_OFFSET 24
+#define PINCTRL_DRIVE5_BANK1_PIN13_V (1 << 22)
+#define PINCTRL_DRIVE5_BANK1_PIN13_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE5_BANK1_PIN13_MA_OFFSET 20
+#define PINCTRL_DRIVE5_BANK1_PIN12_V (1 << 18)
+#define PINCTRL_DRIVE5_BANK1_PIN12_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE5_BANK1_PIN12_MA_OFFSET 16
+#define PINCTRL_DRIVE5_BANK1_PIN11_V (1 << 14)
+#define PINCTRL_DRIVE5_BANK1_PIN11_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE5_BANK1_PIN11_MA_OFFSET 12
+#define PINCTRL_DRIVE5_BANK1_PIN10_V (1 << 10)
+#define PINCTRL_DRIVE5_BANK1_PIN10_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE5_BANK1_PIN10_MA_OFFSET 8
+#define PINCTRL_DRIVE5_BANK1_PIN09_V (1 << 6)
+#define PINCTRL_DRIVE5_BANK1_PIN09_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE5_BANK1_PIN09_MA_OFFSET 4
+#define PINCTRL_DRIVE5_BANK1_PIN08_V (1 << 2)
+#define PINCTRL_DRIVE5_BANK1_PIN08_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE5_BANK1_PIN08_MA_OFFSET 0
+
+#define PINCTRL_DRIVE6_BANK1_PIN23_V (1 << 30)
+#define PINCTRL_DRIVE6_BANK1_PIN23_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE6_BANK1_PIN23_MA_OFFSET 28
+#define PINCTRL_DRIVE6_BANK1_PIN22_V (1 << 26)
+#define PINCTRL_DRIVE6_BANK1_PIN22_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE6_BANK1_PIN22_MA_OFFSET 24
+#define PINCTRL_DRIVE6_BANK1_PIN21_V (1 << 22)
+#define PINCTRL_DRIVE6_BANK1_PIN21_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE6_BANK1_PIN21_MA_OFFSET 20
+#define PINCTRL_DRIVE6_BANK1_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE6_BANK1_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE6_BANK1_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE6_BANK1_PIN19_V (1 << 14)
+#define PINCTRL_DRIVE6_BANK1_PIN19_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE6_BANK1_PIN19_MA_OFFSET 12
+#define PINCTRL_DRIVE6_BANK1_PIN18_V (1 << 10)
+#define PINCTRL_DRIVE6_BANK1_PIN18_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE6_BANK1_PIN18_MA_OFFSET 8
+#define PINCTRL_DRIVE6_BANK1_PIN17_V (1 << 6)
+#define PINCTRL_DRIVE6_BANK1_PIN17_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE6_BANK1_PIN17_MA_OFFSET 4
+#define PINCTRL_DRIVE6_BANK1_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE6_BANK1_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE6_BANK1_PIN16_MA_OFFSET 0
+
+#define PINCTRL_DRIVE7_BANK1_PIN31_V (1 << 30)
+#define PINCTRL_DRIVE7_BANK1_PIN31_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE7_BANK1_PIN31_MA_OFFSET 28
+#define PINCTRL_DRIVE7_BANK1_PIN30_V (1 << 26)
+#define PINCTRL_DRIVE7_BANK1_PIN30_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE7_BANK1_PIN30_MA_OFFSET 24
+#define PINCTRL_DRIVE7_BANK1_PIN29_V (1 << 22)
+#define PINCTRL_DRIVE7_BANK1_PIN29_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE7_BANK1_PIN29_MA_OFFSET 20
+#define PINCTRL_DRIVE7_BANK1_PIN28_V (1 << 18)
+#define PINCTRL_DRIVE7_BANK1_PIN28_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE7_BANK1_PIN28_MA_OFFSET 16
+#define PINCTRL_DRIVE7_BANK1_PIN27_V (1 << 14)
+#define PINCTRL_DRIVE7_BANK1_PIN27_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE7_BANK1_PIN27_MA_OFFSET 12
+#define PINCTRL_DRIVE7_BANK1_PIN26_V (1 << 10)
+#define PINCTRL_DRIVE7_BANK1_PIN26_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE7_BANK1_PIN26_MA_OFFSET 8
+#define PINCTRL_DRIVE7_BANK1_PIN25_V (1 << 6)
+#define PINCTRL_DRIVE7_BANK1_PIN25_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE7_BANK1_PIN25_MA_OFFSET 4
+#define PINCTRL_DRIVE7_BANK1_PIN24_V (1 << 2)
+#define PINCTRL_DRIVE7_BANK1_PIN24_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE7_BANK1_PIN24_MA_OFFSET 0
+
+#define PINCTRL_DRIVE8_BANK2_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE8_BANK2_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE8_BANK2_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE8_BANK2_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE8_BANK2_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE8_BANK2_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE8_BANK2_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE8_BANK2_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE8_BANK2_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE8_BANK2_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE8_BANK2_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE8_BANK2_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE8_BANK2_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE8_BANK2_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE8_BANK2_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE8_BANK2_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE8_BANK2_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE8_BANK2_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE8_BANK2_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE8_BANK2_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE8_BANK2_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE8_BANK2_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE8_BANK2_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE8_BANK2_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE9_BANK2_PIN15_V (1 << 30)
+#define PINCTRL_DRIVE9_BANK2_PIN15_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE9_BANK2_PIN15_MA_OFFSET 28
+#define PINCTRL_DRIVE9_BANK2_PIN14_V (1 << 26)
+#define PINCTRL_DRIVE9_BANK2_PIN14_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE9_BANK2_PIN14_MA_OFFSET 24
+#define PINCTRL_DRIVE9_BANK2_PIN13_V (1 << 22)
+#define PINCTRL_DRIVE9_BANK2_PIN13_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE9_BANK2_PIN13_MA_OFFSET 20
+#define PINCTRL_DRIVE9_BANK2_PIN12_V (1 << 18)
+#define PINCTRL_DRIVE9_BANK2_PIN12_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE9_BANK2_PIN12_MA_OFFSET 16
+#define PINCTRL_DRIVE9_BANK2_PIN10_V (1 << 10)
+#define PINCTRL_DRIVE9_BANK2_PIN10_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE9_BANK2_PIN10_MA_OFFSET 8
+#define PINCTRL_DRIVE9_BANK2_PIN09_V (1 << 6)
+#define PINCTRL_DRIVE9_BANK2_PIN09_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE9_BANK2_PIN09_MA_OFFSET 4
+#define PINCTRL_DRIVE9_BANK2_PIN08_V (1 << 2)
+#define PINCTRL_DRIVE9_BANK2_PIN08_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE9_BANK2_PIN08_MA_OFFSET 0
+
+#define PINCTRL_DRIVE10_BANK2_PIN21_V (1 << 22)
+#define PINCTRL_DRIVE10_BANK2_PIN21_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE10_BANK2_PIN21_MA_OFFSET 20
+#define PINCTRL_DRIVE10_BANK2_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE10_BANK2_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE10_BANK2_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE10_BANK2_PIN19_V (1 << 14)
+#define PINCTRL_DRIVE10_BANK2_PIN19_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE10_BANK2_PIN19_MA_OFFSET 12
+#define PINCTRL_DRIVE10_BANK2_PIN18_V (1 << 10)
+#define PINCTRL_DRIVE10_BANK2_PIN18_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE10_BANK2_PIN18_MA_OFFSET 8
+#define PINCTRL_DRIVE10_BANK2_PIN17_V (1 << 6)
+#define PINCTRL_DRIVE10_BANK2_PIN17_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE10_BANK2_PIN17_MA_OFFSET 4
+#define PINCTRL_DRIVE10_BANK2_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE10_BANK2_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE10_BANK2_PIN16_MA_OFFSET 0
+
+#define PINCTRL_DRIVE11_BANK2_PIN27_V (1 << 14)
+#define PINCTRL_DRIVE11_BANK2_PIN27_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE11_BANK2_PIN27_MA_OFFSET 12
+#define PINCTRL_DRIVE11_BANK2_PIN26_V (1 << 10)
+#define PINCTRL_DRIVE11_BANK2_PIN26_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE11_BANK2_PIN26_MA_OFFSET 8
+#define PINCTRL_DRIVE11_BANK2_PIN25_V (1 << 6)
+#define PINCTRL_DRIVE11_BANK2_PIN25_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE11_BANK2_PIN25_MA_OFFSET 4
+#define PINCTRL_DRIVE11_BANK2_PIN24_V (1 << 2)
+#define PINCTRL_DRIVE11_BANK2_PIN24_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE11_BANK2_PIN24_MA_OFFSET 0
+
+#define PINCTRL_DRIVE12_BANK3_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE12_BANK3_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE12_BANK3_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE12_BANK3_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE12_BANK3_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE12_BANK3_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE12_BANK3_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE12_BANK3_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE12_BANK3_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE12_BANK3_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE12_BANK3_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE12_BANK3_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE12_BANK3_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE12_BANK3_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE12_BANK3_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE12_BANK3_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE12_BANK3_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE12_BANK3_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE12_BANK3_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE12_BANK3_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE12_BANK3_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE12_BANK3_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE12_BANK3_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE12_BANK3_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE13_BANK3_PIN15_V (1 << 30)
+#define PINCTRL_DRIVE13_BANK3_PIN15_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE13_BANK3_PIN15_MA_OFFSET 28
+#define PINCTRL_DRIVE13_BANK3_PIN14_V (1 << 26)
+#define PINCTRL_DRIVE13_BANK3_PIN14_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE13_BANK3_PIN14_MA_OFFSET 24
+#define PINCTRL_DRIVE13_BANK3_PIN13_V (1 << 22)
+#define PINCTRL_DRIVE13_BANK3_PIN13_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE13_BANK3_PIN13_MA_OFFSET 20
+#define PINCTRL_DRIVE13_BANK3_PIN12_V (1 << 18)
+#define PINCTRL_DRIVE13_BANK3_PIN12_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE13_BANK3_PIN12_MA_OFFSET 16
+#define PINCTRL_DRIVE13_BANK3_PIN11_V (1 << 14)
+#define PINCTRL_DRIVE13_BANK3_PIN11_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE13_BANK3_PIN11_MA_OFFSET 12
+#define PINCTRL_DRIVE13_BANK3_PIN10_V (1 << 10)
+#define PINCTRL_DRIVE13_BANK3_PIN10_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE13_BANK3_PIN10_MA_OFFSET 8
+#define PINCTRL_DRIVE13_BANK3_PIN09_V (1 << 6)
+#define PINCTRL_DRIVE13_BANK3_PIN09_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE13_BANK3_PIN09_MA_OFFSET 4
+#define PINCTRL_DRIVE13_BANK3_PIN08_V (1 << 2)
+#define PINCTRL_DRIVE13_BANK3_PIN08_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE13_BANK3_PIN08_MA_OFFSET 0
+
+#define PINCTRL_DRIVE14_BANK3_PIN23_V (1 << 30)
+#define PINCTRL_DRIVE14_BANK3_PIN23_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE14_BANK3_PIN23_MA_OFFSET 28
+#define PINCTRL_DRIVE14_BANK3_PIN22_V (1 << 26)
+#define PINCTRL_DRIVE14_BANK3_PIN22_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE14_BANK3_PIN22_MA_OFFSET 24
+#define PINCTRL_DRIVE14_BANK3_PIN21_V (1 << 22)
+#define PINCTRL_DRIVE14_BANK3_PIN21_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE14_BANK3_PIN21_MA_OFFSET 20
+#define PINCTRL_DRIVE14_BANK3_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE14_BANK3_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE14_BANK3_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE14_BANK3_PIN18_V (1 << 10)
+#define PINCTRL_DRIVE14_BANK3_PIN18_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE14_BANK3_PIN18_MA_OFFSET 8
+#define PINCTRL_DRIVE14_BANK3_PIN17_V (1 << 6)
+#define PINCTRL_DRIVE14_BANK3_PIN17_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE14_BANK3_PIN17_MA_OFFSET 4
+#define PINCTRL_DRIVE14_BANK3_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE14_BANK3_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE14_BANK3_PIN16_MA_OFFSET 0
+
+#define PINCTRL_DRIVE15_BANK3_PIN30_V (1 << 26)
+#define PINCTRL_DRIVE15_BANK3_PIN30_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE15_BANK3_PIN30_MA_OFFSET 24
+#define PINCTRL_DRIVE15_BANK3_PIN29_V (1 << 22)
+#define PINCTRL_DRIVE15_BANK3_PIN29_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE15_BANK3_PIN29_MA_OFFSET 20
+#define PINCTRL_DRIVE15_BANK3_PIN28_V (1 << 18)
+#define PINCTRL_DRIVE15_BANK3_PIN28_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE15_BANK3_PIN28_MA_OFFSET 16
+#define PINCTRL_DRIVE15_BANK3_PIN27_V (1 << 14)
+#define PINCTRL_DRIVE15_BANK3_PIN27_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE15_BANK3_PIN27_MA_OFFSET 12
+#define PINCTRL_DRIVE15_BANK3_PIN26_V (1 << 10)
+#define PINCTRL_DRIVE15_BANK3_PIN26_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE15_BANK3_PIN26_MA_OFFSET 8
+#define PINCTRL_DRIVE15_BANK3_PIN25_V (1 << 6)
+#define PINCTRL_DRIVE15_BANK3_PIN25_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE15_BANK3_PIN25_MA_OFFSET 4
+#define PINCTRL_DRIVE15_BANK3_PIN24_V (1 << 2)
+#define PINCTRL_DRIVE15_BANK3_PIN24_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE15_BANK3_PIN24_MA_OFFSET 0
+
+#define PINCTRL_DRIVE16_BANK4_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE16_BANK4_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE16_BANK4_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE16_BANK4_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE16_BANK4_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE16_BANK4_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE16_BANK4_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE16_BANK4_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE16_BANK4_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE16_BANK4_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE16_BANK4_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE16_BANK4_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE16_BANK4_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE16_BANK4_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE16_BANK4_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE16_BANK4_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE16_BANK4_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE16_BANK4_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE16_BANK4_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE16_BANK4_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE16_BANK4_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE16_BANK4_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE16_BANK4_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE16_BANK4_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE17_BANK4_PIN15_V (1 << 30)
+#define PINCTRL_DRIVE17_BANK4_PIN15_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE17_BANK4_PIN15_MA_OFFSET 28
+#define PINCTRL_DRIVE17_BANK4_PIN14_V (1 << 26)
+#define PINCTRL_DRIVE17_BANK4_PIN14_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE17_BANK4_PIN14_MA_OFFSET 24
+#define PINCTRL_DRIVE17_BANK4_PIN13_V (1 << 22)
+#define PINCTRL_DRIVE17_BANK4_PIN13_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE17_BANK4_PIN13_MA_OFFSET 20
+#define PINCTRL_DRIVE17_BANK4_PIN12_V (1 << 18)
+#define PINCTRL_DRIVE17_BANK4_PIN12_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE17_BANK4_PIN12_MA_OFFSET 16
+#define PINCTRL_DRIVE17_BANK4_PIN11_V (1 << 14)
+#define PINCTRL_DRIVE17_BANK4_PIN11_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE17_BANK4_PIN11_MA_OFFSET 12
+#define PINCTRL_DRIVE17_BANK4_PIN10_V (1 << 10)
+#define PINCTRL_DRIVE17_BANK4_PIN10_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE17_BANK4_PIN10_MA_OFFSET 8
+#define PINCTRL_DRIVE17_BANK4_PIN09_V (1 << 6)
+#define PINCTRL_DRIVE17_BANK4_PIN09_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE17_BANK4_PIN09_MA_OFFSET 4
+#define PINCTRL_DRIVE17_BANK4_PIN08_V (1 << 2)
+#define PINCTRL_DRIVE17_BANK4_PIN08_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE17_BANK4_PIN08_MA_OFFSET 0
+
+#define PINCTRL_DRIVE18_BANK4_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE18_BANK4_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE18_BANK4_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE18_BANK4_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE18_BANK4_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE18_BANK4_PIN16_MA_OFFSET 0
+
+#define PINCTRL_PULL0_BANK0_PIN28 (1 << 28)
+#define PINCTRL_PULL0_BANK0_PIN27 (1 << 27)
+#define PINCTRL_PULL0_BANK0_PIN26 (1 << 26)
+#define PINCTRL_PULL0_BANK0_PIN25 (1 << 25)
+#define PINCTRL_PULL0_BANK0_PIN24 (1 << 24)
+#define PINCTRL_PULL0_BANK0_PIN23 (1 << 23)
+#define PINCTRL_PULL0_BANK0_PIN22 (1 << 22)
+#define PINCTRL_PULL0_BANK0_PIN21 (1 << 21)
+#define PINCTRL_PULL0_BANK0_PIN20 (1 << 20)
+#define PINCTRL_PULL0_BANK0_PIN19 (1 << 19)
+#define PINCTRL_PULL0_BANK0_PIN18 (1 << 18)
+#define PINCTRL_PULL0_BANK0_PIN17 (1 << 17)
+#define PINCTRL_PULL0_BANK0_PIN16 (1 << 16)
+#define PINCTRL_PULL0_BANK0_PIN07 (1 << 7)
+#define PINCTRL_PULL0_BANK0_PIN06 (1 << 6)
+#define PINCTRL_PULL0_BANK0_PIN05 (1 << 5)
+#define PINCTRL_PULL0_BANK0_PIN04 (1 << 4)
+#define PINCTRL_PULL0_BANK0_PIN03 (1 << 3)
+#define PINCTRL_PULL0_BANK0_PIN02 (1 << 2)
+#define PINCTRL_PULL0_BANK0_PIN01 (1 << 1)
+#define PINCTRL_PULL0_BANK0_PIN00 (1 << 0)
+
+#define PINCTRL_PULL1_BANK1_PIN31 (1 << 31)
+#define PINCTRL_PULL1_BANK1_PIN30 (1 << 30)
+#define PINCTRL_PULL1_BANK1_PIN29 (1 << 29)
+#define PINCTRL_PULL1_BANK1_PIN28 (1 << 28)
+#define PINCTRL_PULL1_BANK1_PIN27 (1 << 27)
+#define PINCTRL_PULL1_BANK1_PIN26 (1 << 26)
+#define PINCTRL_PULL1_BANK1_PIN25 (1 << 25)
+#define PINCTRL_PULL1_BANK1_PIN24 (1 << 24)
+#define PINCTRL_PULL1_BANK1_PIN23 (1 << 23)
+#define PINCTRL_PULL1_BANK1_PIN22 (1 << 22)
+#define PINCTRL_PULL1_BANK1_PIN21 (1 << 21)
+#define PINCTRL_PULL1_BANK1_PIN20 (1 << 20)
+#define PINCTRL_PULL1_BANK1_PIN19 (1 << 19)
+#define PINCTRL_PULL1_BANK1_PIN18 (1 << 18)
+#define PINCTRL_PULL1_BANK1_PIN17 (1 << 17)
+#define PINCTRL_PULL1_BANK1_PIN16 (1 << 16)
+#define PINCTRL_PULL1_BANK1_PIN15 (1 << 15)
+#define PINCTRL_PULL1_BANK1_PIN14 (1 << 14)
+#define PINCTRL_PULL1_BANK1_PIN13 (1 << 13)
+#define PINCTRL_PULL1_BANK1_PIN12 (1 << 12)
+#define PINCTRL_PULL1_BANK1_PIN11 (1 << 11)
+#define PINCTRL_PULL1_BANK1_PIN10 (1 << 10)
+#define PINCTRL_PULL1_BANK1_PIN09 (1 << 9)
+#define PINCTRL_PULL1_BANK1_PIN08 (1 << 8)
+#define PINCTRL_PULL1_BANK1_PIN07 (1 << 7)
+#define PINCTRL_PULL1_BANK1_PIN06 (1 << 6)
+#define PINCTRL_PULL1_BANK1_PIN05 (1 << 5)
+#define PINCTRL_PULL1_BANK1_PIN04 (1 << 4)
+#define PINCTRL_PULL1_BANK1_PIN03 (1 << 3)
+#define PINCTRL_PULL1_BANK1_PIN02 (1 << 2)
+#define PINCTRL_PULL1_BANK1_PIN01 (1 << 1)
+#define PINCTRL_PULL1_BANK1_PIN00 (1 << 0)
+
+#define PINCTRL_PULL2_BANK2_PIN27 (1 << 27)
+#define PINCTRL_PULL2_BANK2_PIN26 (1 << 26)
+#define PINCTRL_PULL2_BANK2_PIN25 (1 << 25)
+#define PINCTRL_PULL2_BANK2_PIN24 (1 << 24)
+#define PINCTRL_PULL2_BANK2_PIN21 (1 << 21)
+#define PINCTRL_PULL2_BANK2_PIN20 (1 << 20)
+#define PINCTRL_PULL2_BANK2_PIN19 (1 << 19)
+#define PINCTRL_PULL2_BANK2_PIN18 (1 << 18)
+#define PINCTRL_PULL2_BANK2_PIN17 (1 << 17)
+#define PINCTRL_PULL2_BANK2_PIN16 (1 << 16)
+#define PINCTRL_PULL2_BANK2_PIN15 (1 << 15)
+#define PINCTRL_PULL2_BANK2_PIN14 (1 << 14)
+#define PINCTRL_PULL2_BANK2_PIN13 (1 << 13)
+#define PINCTRL_PULL2_BANK2_PIN12 (1 << 12)
+#define PINCTRL_PULL2_BANK2_PIN10 (1 << 10)
+#define PINCTRL_PULL2_BANK2_PIN09 (1 << 9)
+#define PINCTRL_PULL2_BANK2_PIN08 (1 << 8)
+#define PINCTRL_PULL2_BANK2_PIN07 (1 << 7)
+#define PINCTRL_PULL2_BANK2_PIN06 (1 << 6)
+#define PINCTRL_PULL2_BANK2_PIN05 (1 << 5)
+#define PINCTRL_PULL2_BANK2_PIN04 (1 << 4)
+#define PINCTRL_PULL2_BANK2_PIN03 (1 << 3)
+#define PINCTRL_PULL2_BANK2_PIN02 (1 << 2)
+#define PINCTRL_PULL2_BANK2_PIN01 (1 << 1)
+#define PINCTRL_PULL2_BANK2_PIN00 (1 << 0)
+
+#define PINCTRL_PULL3_BANK3_PIN30 (1 << 30)
+#define PINCTRL_PULL3_BANK3_PIN29 (1 << 29)
+#define PINCTRL_PULL3_BANK3_PIN28 (1 << 28)
+#define PINCTRL_PULL3_BANK3_PIN27 (1 << 27)
+#define PINCTRL_PULL3_BANK3_PIN26 (1 << 26)
+#define PINCTRL_PULL3_BANK3_PIN25 (1 << 25)
+#define PINCTRL_PULL3_BANK3_PIN24 (1 << 24)
+#define PINCTRL_PULL3_BANK3_PIN23 (1 << 23)
+#define PINCTRL_PULL3_BANK3_PIN22 (1 << 22)
+#define PINCTRL_PULL3_BANK3_PIN21 (1 << 21)
+#define PINCTRL_PULL3_BANK3_PIN20 (1 << 20)
+#define PINCTRL_PULL3_BANK3_PIN18 (1 << 18)
+#define PINCTRL_PULL3_BANK3_PIN17 (1 << 17)
+#define PINCTRL_PULL3_BANK3_PIN16 (1 << 16)
+#define PINCTRL_PULL3_BANK3_PIN15 (1 << 15)
+#define PINCTRL_PULL3_BANK3_PIN14 (1 << 14)
+#define PINCTRL_PULL3_BANK3_PIN13 (1 << 13)
+#define PINCTRL_PULL3_BANK3_PIN12 (1 << 12)
+#define PINCTRL_PULL3_BANK3_PIN11 (1 << 11)
+#define PINCTRL_PULL3_BANK3_PIN10 (1 << 10)
+#define PINCTRL_PULL3_BANK3_PIN09 (1 << 9)
+#define PINCTRL_PULL3_BANK3_PIN08 (1 << 8)
+#define PINCTRL_PULL3_BANK3_PIN07 (1 << 7)
+#define PINCTRL_PULL3_BANK3_PIN06 (1 << 6)
+#define PINCTRL_PULL3_BANK3_PIN05 (1 << 5)
+#define PINCTRL_PULL3_BANK3_PIN04 (1 << 4)
+#define PINCTRL_PULL3_BANK3_PIN03 (1 << 3)
+#define PINCTRL_PULL3_BANK3_PIN02 (1 << 2)
+#define PINCTRL_PULL3_BANK3_PIN01 (1 << 1)
+#define PINCTRL_PULL3_BANK3_PIN00 (1 << 0)
+
+#define PINCTRL_PULL4_BANK4_PIN20 (1 << 20)
+#define PINCTRL_PULL4_BANK4_PIN16 (1 << 16)
+#define PINCTRL_PULL4_BANK4_PIN15 (1 << 15)
+#define PINCTRL_PULL4_BANK4_PIN14 (1 << 14)
+#define PINCTRL_PULL4_BANK4_PIN13 (1 << 13)
+#define PINCTRL_PULL4_BANK4_PIN12 (1 << 12)
+#define PINCTRL_PULL4_BANK4_PIN11 (1 << 11)
+#define PINCTRL_PULL4_BANK4_PIN10 (1 << 10)
+#define PINCTRL_PULL4_BANK4_PIN09 (1 << 9)
+#define PINCTRL_PULL4_BANK4_PIN08 (1 << 8)
+#define PINCTRL_PULL4_BANK4_PIN07 (1 << 7)
+#define PINCTRL_PULL4_BANK4_PIN06 (1 << 6)
+#define PINCTRL_PULL4_BANK4_PIN05 (1 << 5)
+#define PINCTRL_PULL4_BANK4_PIN04 (1 << 4)
+#define PINCTRL_PULL4_BANK4_PIN03 (1 << 3)
+#define PINCTRL_PULL4_BANK4_PIN02 (1 << 2)
+#define PINCTRL_PULL4_BANK4_PIN01 (1 << 1)
+#define PINCTRL_PULL4_BANK4_PIN00 (1 << 0)
+
+#define PINCTRL_PULL5_BANK5_PIN26 (1 << 26)
+#define PINCTRL_PULL5_BANK5_PIN23 (1 << 23)
+#define PINCTRL_PULL5_BANK5_PIN22 (1 << 22)
+#define PINCTRL_PULL5_BANK5_PIN21 (1 << 21)
+#define PINCTRL_PULL5_BANK5_PIN20 (1 << 20)
+#define PINCTRL_PULL5_BANK5_PIN19 (1 << 19)
+#define PINCTRL_PULL5_BANK5_PIN18 (1 << 18)
+#define PINCTRL_PULL5_BANK5_PIN17 (1 << 17)
+#define PINCTRL_PULL5_BANK5_PIN16 (1 << 16)
+#define PINCTRL_PULL5_BANK5_PIN15 (1 << 15)
+#define PINCTRL_PULL5_BANK5_PIN14 (1 << 14)
+#define PINCTRL_PULL5_BANK5_PIN13 (1 << 13)
+#define PINCTRL_PULL5_BANK5_PIN12 (1 << 12)
+#define PINCTRL_PULL5_BANK5_PIN11 (1 << 11)
+#define PINCTRL_PULL5_BANK5_PIN10 (1 << 10)
+#define PINCTRL_PULL5_BANK5_PIN09 (1 << 9)
+#define PINCTRL_PULL5_BANK5_PIN08 (1 << 8)
+#define PINCTRL_PULL5_BANK5_PIN07 (1 << 7)
+#define PINCTRL_PULL5_BANK5_PIN06 (1 << 6)
+#define PINCTRL_PULL5_BANK5_PIN05 (1 << 5)
+#define PINCTRL_PULL5_BANK5_PIN04 (1 << 4)
+#define PINCTRL_PULL5_BANK5_PIN03 (1 << 3)
+#define PINCTRL_PULL5_BANK5_PIN02 (1 << 2)
+#define PINCTRL_PULL5_BANK5_PIN01 (1 << 1)
+#define PINCTRL_PULL5_BANK5_PIN00 (1 << 0)
+
+#define PINCTRL_PULL6_BANK6_PIN24 (1 << 24)
+#define PINCTRL_PULL6_BANK6_PIN23 (1 << 23)
+#define PINCTRL_PULL6_BANK6_PIN22 (1 << 22)
+#define PINCTRL_PULL6_BANK6_PIN21 (1 << 21)
+#define PINCTRL_PULL6_BANK6_PIN20 (1 << 20)
+#define PINCTRL_PULL6_BANK6_PIN19 (1 << 19)
+#define PINCTRL_PULL6_BANK6_PIN18 (1 << 18)
+#define PINCTRL_PULL6_BANK6_PIN17 (1 << 17)
+#define PINCTRL_PULL6_BANK6_PIN16 (1 << 16)
+#define PINCTRL_PULL6_BANK6_PIN14 (1 << 14)
+#define PINCTRL_PULL6_BANK6_PIN13 (1 << 13)
+#define PINCTRL_PULL6_BANK6_PIN12 (1 << 12)
+#define PINCTRL_PULL6_BANK6_PIN11 (1 << 11)
+#define PINCTRL_PULL6_BANK6_PIN10 (1 << 10)
+#define PINCTRL_PULL6_BANK6_PIN09 (1 << 9)
+#define PINCTRL_PULL6_BANK6_PIN08 (1 << 8)
+#define PINCTRL_PULL6_BANK6_PIN07 (1 << 7)
+#define PINCTRL_PULL6_BANK6_PIN06 (1 << 6)
+#define PINCTRL_PULL6_BANK6_PIN05 (1 << 5)
+#define PINCTRL_PULL6_BANK6_PIN04 (1 << 4)
+#define PINCTRL_PULL6_BANK6_PIN03 (1 << 3)
+#define PINCTRL_PULL6_BANK6_PIN02 (1 << 2)
+#define PINCTRL_PULL6_BANK6_PIN01 (1 << 1)
+#define PINCTRL_PULL6_BANK6_PIN00 (1 << 0)
+
+#define PINCTRL_DOUT0_DOUT_MASK 0x1fffffff
+#define PINCTRL_DOUT0_DOUT_OFFSET 0
+
+#define PINCTRL_DOUT1_DOUT_MASK 0xffffffff
+#define PINCTRL_DOUT1_DOUT_OFFSET 0
+
+#define PINCTRL_DOUT2_DOUT_MASK 0xfffffff
+#define PINCTRL_DOUT2_DOUT_OFFSET 0
+
+#define PINCTRL_DOUT3_DOUT_MASK 0x7fffffff
+#define PINCTRL_DOUT3_DOUT_OFFSET 0
+
+#define PINCTRL_DOUT4_DOUT_MASK 0x1fffff
+#define PINCTRL_DOUT4_DOUT_OFFSET 0
+
+#define PINCTRL_DIN0_DIN_MASK 0x1fffffff
+#define PINCTRL_DIN0_DIN_OFFSET 0
+
+#define PINCTRL_DIN1_DIN_MASK 0xffffffff
+#define PINCTRL_DIN1_DIN_OFFSET 0
+
+#define PINCTRL_DIN2_DIN_MASK 0xfffffff
+#define PINCTRL_DIN2_DIN_OFFSET 0
+
+#define PINCTRL_DIN3_DIN_MASK 0x7fffffff
+#define PINCTRL_DIN3_DIN_OFFSET 0
+
+#define PINCTRL_DIN4_DIN_MASK 0x1fffff
+#define PINCTRL_DIN4_DIN_OFFSET 0
+
+#define PINCTRL_DOE0_DOE_MASK 0x1fffffff
+#define PINCTRL_DOE0_DOE_OFFSET 0
+
+#define PINCTRL_DOE1_DOE_MASK 0xffffffff
+#define PINCTRL_DOE1_DOE_OFFSET 0
+
+#define PINCTRL_DOE2_DOE_MASK 0xfffffff
+#define PINCTRL_DOE2_DOE_OFFSET 0
+
+#define PINCTRL_DOE3_DOE_MASK 0x7fffffff
+#define PINCTRL_DOE3_DOE_OFFSET 0
+
+#define PINCTRL_DOE4_DOE_MASK 0x1fffff
+#define PINCTRL_DOE4_DOE_OFFSET 0
+
+#define PINCTRL_PIN2IRQ0_PIN2IRQ_MASK 0x1fffffff
+#define PINCTRL_PIN2IRQ0_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_PIN2IRQ1_PIN2IRQ_MASK 0xffffffff
+#define PINCTRL_PIN2IRQ1_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_PIN2IRQ2_PIN2IRQ_MASK 0xfffffff
+#define PINCTRL_PIN2IRQ2_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_PIN2IRQ3_PIN2IRQ_MASK 0x7fffffff
+#define PINCTRL_PIN2IRQ3_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_PIN2IRQ4_PIN2IRQ_MASK 0x1fffff
+#define PINCTRL_PIN2IRQ4_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_IRQEN0_IRQEN_MASK 0x1fffffff
+#define PINCTRL_IRQEN0_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQEN1_IRQEN_MASK 0xffffffff
+#define PINCTRL_IRQEN1_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQEN2_IRQEN_MASK 0xfffffff
+#define PINCTRL_IRQEN2_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQEN3_IRQEN_MASK 0x7fffffff
+#define PINCTRL_IRQEN3_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQEN4_IRQEN_MASK 0x1fffff
+#define PINCTRL_IRQEN4_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQLEVEL0_IRQLEVEL_MASK 0x1fffffff
+#define PINCTRL_IRQLEVEL0_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQLEVEL1_IRQLEVEL_MASK 0xffffffff
+#define PINCTRL_IRQLEVEL1_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQLEVEL2_IRQLEVEL_MASK 0xfffffff
+#define PINCTRL_IRQLEVEL2_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQLEVEL3_IRQLEVEL_MASK 0x7fffffff
+#define PINCTRL_IRQLEVEL3_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQLEVEL4_IRQLEVEL_MASK 0x1fffff
+#define PINCTRL_IRQLEVEL4_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQPOL0_IRQPOL_MASK 0x1fffffff
+#define PINCTRL_IRQPOL0_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQPOL1_IRQPOL_MASK 0xffffffff
+#define PINCTRL_IRQPOL1_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQPOL2_IRQPOL_MASK 0xfffffff
+#define PINCTRL_IRQPOL2_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQPOL3_IRQPOL_MASK 0x7fffffff
+#define PINCTRL_IRQPOL3_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQPOL4_IRQPOL_MASK 0x1fffff
+#define PINCTRL_IRQPOL4_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQSTAT0_IRQSTAT_MASK 0x1fffffff
+#define PINCTRL_IRQSTAT0_IRQSTAT_OFFSET 0
+
+#define PINCTRL_IRQSTAT1_IRQSTAT_MASK 0xffffffff
+#define PINCTRL_IRQSTAT1_IRQSTAT_OFFSET 0
+
+#define PINCTRL_IRQSTAT2_IRQSTAT_MASK 0xfffffff
+#define PINCTRL_IRQSTAT2_IRQSTAT_OFFSET 0
+
+#define PINCTRL_IRQSTAT3_IRQSTAT_MASK 0x7fffffff
+#define PINCTRL_IRQSTAT3_IRQSTAT_OFFSET 0
+
+#define PINCTRL_IRQSTAT4_IRQSTAT_MASK 0x1fffff
+#define PINCTRL_IRQSTAT4_IRQSTAT_OFFSET 0
+
+#define PINCTRL_EMI_ODT_CTRL_ADDRESS_CALIB_MASK (0x3 << 26)
+#define PINCTRL_EMI_ODT_CTRL_ADDRESS_CALIB_OFFSET 26
+#define PINCTRL_EMI_ODT_CTRL_ADDRESS_TLOAD_MASK (0x3 << 24)
+#define PINCTRL_EMI_ODT_CTRL_ADDRESS_TLOAD_OFFSET 24
+#define PINCTRL_EMI_ODT_CTRL_CONTROL_CALIB_MASK (0x3 << 22)
+#define PINCTRL_EMI_ODT_CTRL_CONTROL_CALIB_OFFSET 22
+#define PINCTRL_EMI_ODT_CTRL_CONTROL_TLOAD_MASK (0x3 << 20)
+#define PINCTRL_EMI_ODT_CTRL_CONTROL_TLOAD_OFFSET 20
+#define PINCTRL_EMI_ODT_CTRL_DUALPAD_CALIB_MASK (0x3 << 18)
+#define PINCTRL_EMI_ODT_CTRL_DUALPAD_CALIB_OFFSET 18
+#define PINCTRL_EMI_ODT_CTRL_DUALPAD_TLOAD_MASK (0x3 << 16)
+#define PINCTRL_EMI_ODT_CTRL_DUALPAD_TLOAD_OFFSET 16
+#define PINCTRL_EMI_ODT_CTRL_SLICE3_CALIB_MASK (0x3 << 14)
+#define PINCTRL_EMI_ODT_CTRL_SLICE3_CALIB_OFFSET 14
+#define PINCTRL_EMI_ODT_CTRL_SLICE3_TLOAD_MASK (0x3 << 12)
+#define PINCTRL_EMI_ODT_CTRL_SLICE3_TLOAD_OFFSET 12
+#define PINCTRL_EMI_ODT_CTRL_SLICE2_CALIB_MASK (0x3 << 10)
+#define PINCTRL_EMI_ODT_CTRL_SLICE2_CALIB_OFFSET 10
+#define PINCTRL_EMI_ODT_CTRL_SLICE2_TLOAD_MASK (0x3 << 8)
+#define PINCTRL_EMI_ODT_CTRL_SLICE2_TLOAD_OFFSET 8
+#define PINCTRL_EMI_ODT_CTRL_SLICE1_CALIB_MASK (0x3 << 6)
+#define PINCTRL_EMI_ODT_CTRL_SLICE1_CALIB_OFFSET 6
+#define PINCTRL_EMI_ODT_CTRL_SLICE1_TLOAD_MASK (0x3 << 4)
+#define PINCTRL_EMI_ODT_CTRL_SLICE1_TLOAD_OFFSET 4
+#define PINCTRL_EMI_ODT_CTRL_SLICE0_CALIB_MASK (0x3 << 2)
+#define PINCTRL_EMI_ODT_CTRL_SLICE0_CALIB_OFFSET 2
+#define PINCTRL_EMI_ODT_CTRL_SLICE0_TLOAD_MASK (0x3 << 0)
+#define PINCTRL_EMI_ODT_CTRL_SLICE0_TLOAD_OFFSET 0
+
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_MASK (0x3 << 16)
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_OFFSET 16
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_mDDR (0x0 << 16)
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_GPIO (0x1 << 16)
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_LVDDR2 (0x2 << 16)
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2 (0x3 << 16)
+#define PINCTRL_EMI_DS_CTRL_ADDRESS_MA_MASK (0x3 << 12)
+#define PINCTRL_EMI_DS_CTRL_ADDRESS_MA_OFFSET 12
+#define PINCTRL_EMI_DS_CTRL_CONTROL_MA_MASK (0x3 << 10)
+#define PINCTRL_EMI_DS_CTRL_CONTROL_MA_OFFSET 10
+#define PINCTRL_EMI_DS_CTRL_DUALPAD_MA_MASK (0x3 << 8)
+#define PINCTRL_EMI_DS_CTRL_DUALPAD_MA_OFFSET 8
+#define PINCTRL_EMI_DS_CTRL_SLICE3_MA_MASK (0x3 << 6)
+#define PINCTRL_EMI_DS_CTRL_SLICE3_MA_OFFSET 6
+#define PINCTRL_EMI_DS_CTRL_SLICE2_MA_MASK (0x3 << 4)
+#define PINCTRL_EMI_DS_CTRL_SLICE2_MA_OFFSET 4
+#define PINCTRL_EMI_DS_CTRL_SLICE1_MA_MASK (0x3 << 2)
+#define PINCTRL_EMI_DS_CTRL_SLICE1_MA_OFFSET 2
+#define PINCTRL_EMI_DS_CTRL_SLICE0_MA_MASK (0x3 << 0)
+#define PINCTRL_EMI_DS_CTRL_SLICE0_MA_OFFSET 0
+
+#endif /* __REGS_PINCTRL_H__ */
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 05/31] iMX28: Add pinctrl and ocotp register definitions
2011-09-08 20:42 ` [U-Boot] [PATCH 05/31] iMX28: Add pinctrl and ocotp register definitions Marek Vasut
@ 2011-09-09 8:30 ` Stefano Babic
0 siblings, 0 replies; 68+ messages in thread
From: Stefano Babic @ 2011-09-09 8:30 UTC (permalink / raw)
To: u-boot
On 09/08/2011 10:42 PM, Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>
> ---
Hi Marek,
> arch/arm/include/asm/arch-mx28/regs-ocotp.h | 169 ++++
> arch/arm/include/asm/arch-mx28/regs-pinctrl.h | 1280 +++++++++++++++++++++++++
> 2 files changed, 1449 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-ocotp.h
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-pinctrl.h
>
This should be part of patch1/31, is not ?
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 06/31] FEC: Add support for iMX28 quirks
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (4 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 05/31] iMX28: Add pinctrl and ocotp register definitions Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 07/31] iMX28: Add CPU-specific FEC ethernet init Marek Vasut
` (24 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
drivers/net/fec_mxc.c | 44 ++++++++++++++++++++++++++++++++++++++++++--
1 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index fe0253e..e21b6b5 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -42,6 +42,14 @@ DECLARE_GLOBAL_DATA_PTR;
#define CONFIG_FEC_XCV_TYPE MII100
#endif
+/*
+ * The i.MX28 operates with packets in big endian. We need to swap them before
+ * sending and after receiving.
+ */
+#ifdef CONFIG_MX28
+#define CONFIG_FEC_MXC_SWAP_PACKET
+#endif
+
#undef DEBUG
struct nbuf {
@@ -51,6 +59,32 @@ struct nbuf {
uint8_t head[16]; /**< MAC header(6 + 6 + 2) + 2(aligned) */
};
+#ifdef CONFIG_FEC_MXC_SWAP_PACKET
+static void swap_packet(uint32_t *packet, int length)
+{
+ int i;
+
+ for (i = 0; i < DIV_ROUND_UP(length, 4); i++)
+ packet[i] = __swab32(packet[i]);
+}
+#endif
+
+/*
+ * The i.MX28 has two ethernet interfaces, but they are not equal.
+ * Only the first one can access the MDIO bus.
+ */
+#ifdef CONFIG_MX28
+static inline struct ethernet_regs *fec_miiphy_fec_to_eth(struct fec_priv *fec)
+{
+ return (struct ethernet_regs *)MXS_ENET0_BASE;
+}
+#else
+static inline struct ethernet_regs *fec_miiphy_fec_to_eth(struct fec_priv *fec)
+{
+ return fec->eth;
+}
+#endif
+
/*
* MII-interface related functions
*/
@@ -59,7 +93,7 @@ static int fec_miiphy_read(const char *dev, uint8_t phyAddr, uint8_t regAddr,
{
struct eth_device *edev = eth_get_dev_by_name(dev);
struct fec_priv *fec = (struct fec_priv *)edev->priv;
- struct ethernet_regs *eth = fec->eth;
+ struct ethernet_regs *eth = fec_miiphy_fec_to_eth(fec);
uint32_t reg; /* convenient holder for the PHY register */
uint32_t phy; /* convenient holder for the PHY */
@@ -117,7 +151,7 @@ static int fec_miiphy_write(const char *dev, uint8_t phyAddr, uint8_t regAddr,
{
struct eth_device *edev = eth_get_dev_by_name(dev);
struct fec_priv *fec = (struct fec_priv *)edev->priv;
- struct ethernet_regs *eth = fec->eth;
+ struct ethernet_regs *eth = fec_miiphy_fec_to_eth(fec);
uint32_t reg; /* convenient holder for the PHY register */
uint32_t phy; /* convenient holder for the PHY */
@@ -572,6 +606,9 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length)
* Note: We are always using the first buffer for transmission,
* the second will be empty and only used to stop the DMA engine
*/
+#ifdef CONFIG_FEC_MXC_SWAP_PACKET
+ swap_packet((uint32_t *)packet, length);
+#endif
writew(length, &fec->tbd_base[fec->tbd_index].data_length);
writel((uint32_t)packet, &fec->tbd_base[fec->tbd_index].data_pointer);
/*
@@ -668,6 +705,9 @@ static int fec_recv(struct eth_device *dev)
/*
* Fill the buffer and pass it to upper layers
*/
+#ifdef CONFIG_FEC_MXC_SWAP_PACKET
+ swap_packet((uint32_t *)frame->data, frame_length);
+#endif
memcpy(buff, frame->data, frame_length);
NetReceive(buff, frame_length);
len = frame_length;
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 07/31] iMX28: Add CPU-specific FEC ethernet init
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (5 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 06/31] FEC: Add support for iMX28 quirks Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 08/31] M28EVK: Enable FEC0 and FEC1 Marek Vasut
` (23 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
arch/arm/cpu/arm926ejs/mx28/mx28.c | 31 +++++++++++++++++++++++++++++++
1 files changed, 31 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c
index e3df76b..dca54d2 100644
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -129,3 +129,34 @@ int print_cpuinfo(void)
return 0;
}
#endif
+
+/*
+ * Initializes on-chip ethernet controllers.
+ */
+#ifdef CONFIG_CMD_NET
+int cpu_eth_init(bd_t *bis)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ /* Turn on ENET clocks */
+ clrbits_le32(&clkctrl_regs->hw_clkctrl_enet,
+ CLKCTRL_ENET_SLEEP | CLKCTRL_ENET_DISABLE);
+
+ /* Set up ENET PLL for 50 MHz */
+ /* Power on ENET PLL */
+ writel(CLKCTRL_PLL2CTRL0_POWER,
+ &clkctrl_regs->hw_clkctrl_pll2ctrl0_set);
+
+ udelay(10);
+
+ /* Gate on ENET PLL */
+ writel(CLKCTRL_PLL2CTRL0_CLKGATE,
+ &clkctrl_regs->hw_clkctrl_pll2ctrl0_clr);
+
+ /* Enable pad output */
+ setbits_le32(&clkctrl_regs->hw_clkctrl_enet, CLKCTRL_ENET_CLK_OUT_EN);
+
+ return 0;
+}
+#endif
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 08/31] M28EVK: Enable FEC0 and FEC1
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (6 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 07/31] iMX28: Add CPU-specific FEC ethernet init Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 09/31] iMX28: Add PINMUX control Marek Vasut
` (22 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
board/denx/m28evk/m28evk.c | 109 ++++++++++++++++++++++++++++++++++++++++++++
include/configs/m28evk.h | 22 +++++++--
2 files changed, 127 insertions(+), 4 deletions(-)
diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
index d3e6173..fea0227 100644
--- a/board/denx/m28evk/m28evk.c
+++ b/board/denx/m28evk/m28evk.c
@@ -28,10 +28,15 @@
#include <asm/arch/regs-common.h>
#include <asm/arch/regs-base.h>
#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/regs-ocotp.h>
#include <asm/arch/iomux-mx28.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clock.h>
#include <asm/arch/mx28.h>
+#include <linux/mii.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <errno.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -89,3 +94,107 @@ int board_mmc_init(bd_t *bis)
return mxsmmc_initialize(bis, 0, m28_mmc_wp);
}
#endif
+
+#ifdef CONFIG_CMD_NET
+
+#define MII_OPMODE_STRAP_OVERRIDE 0x16
+#define MII_PHY_CTRL1 0x1e
+#define MII_PHY_CTRL2 0x1f
+
+int fecmxc_mii_postcall(int phy)
+{
+ miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
+ miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
+ if (phy == 3)
+ miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8180);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ struct eth_device *dev;
+ int ret;
+
+ ret = cpu_eth_init(bis);
+
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
+ CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,
+ CLKCTRL_ENET_TIME_SEL_RMII_CLK);
+
+ ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
+ if (ret) {
+ printf("FEC MXS: Unable to init FEC0\n");
+ return ret;
+ }
+
+ ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
+ if (ret) {
+ printf("FEC MXS: Unable to init FEC1\n");
+ return ret;
+ }
+
+ dev = eth_get_dev_by_name("FEC0");
+ if (!dev) {
+ printf("FEC MXS: Unable to get FEC0 device entry\n");
+ return -EINVAL;
+ }
+
+ ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
+ if (ret) {
+ printf("FEC MXS: Unable to register FEC0 mii postcall\n");
+ return ret;
+ }
+
+ dev = eth_get_dev_by_name("FEC1");
+ if (!dev) {
+ printf("FEC MXS: Unable to get FEC1 device entry\n");
+ return -EINVAL;
+ }
+
+ ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
+ if (ret) {
+ printf("FEC MXS: Unable to register FEC1 mii postcall\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+#ifdef CONFIG_M28_FEC_MAC_IN_OCOTP
+
+#define MXS_OCOTP_MAX_TIMEOUT 1000000
+void imx_get_mac_from_fuse(char *mac)
+{
+ struct mx28_ocotp_regs *ocotp_regs =
+ (struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
+ uint32_t data;
+
+ memset(mac, 0, 6);
+
+ writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
+
+ if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
+ MXS_OCOTP_MAX_TIMEOUT)) {
+ printf("MXS FEC: Can't get MAC from OCOTP\n");
+ return;
+ }
+
+ data = readl(&ocotp_regs->hw_ocotp_cust0);
+
+ mac[0] = 0x00;
+ mac[1] = 0x04;
+ mac[2] = (data >> 24) & 0xff;
+ mac[3] = (data >> 16) & 0xff;
+ mac[4] = (data >> 8) & 0xff;
+ mac[5] = data & 0xff;
+}
+#else
+void imx_get_mac_from_fuse(char *mac)
+{
+ memset(mac, 0, 6);
+}
+#endif
+
+#endif
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 1b4db7b..9e0d705 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -44,13 +44,14 @@
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
+#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_PING
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
#define CONFIG_CMD_SETEXPR
/*
@@ -106,6 +107,19 @@
#endif
/*
+ * Ethernet on SOC (FEC)
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_NET_MULTI
+#define CONFIG_ETHPRIME "FEC0"
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_MXC_MULTI
+#define CONFIG_MII
+#define CONFIG_DISCOVER_PHY
+#define CONFIG_FEC_XCV_TYPE RMII
+#endif
+
+/*
* Boot Linux
*/
#define CONFIG_CMDLINE_TAG
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 09/31] iMX28: Add PINMUX control
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (7 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 08/31] M28EVK: Enable FEC0 and FEC1 Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 10/31] iMX28: Add RTC register definitions Marek Vasut
` (21 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Taken from Linux kernel with minor modifications:
commit bf985969e27b507f734435a99df8bf745a3dbb2b
Author: Shawn Guo <shawn.guo@freescale.com>
Date: Mon Dec 20 22:57:43 2010 +0800
ARM: mxs: Add iomux support
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
arch/arm/cpu/arm926ejs/mx28/Makefile | 2 +-
arch/arm/cpu/arm926ejs/mx28/iomux.c | 111 ++++++
arch/arm/include/asm/arch-mx28/iomux-mx28.h | 537 +++++++++++++++++++++++++++
arch/arm/include/asm/arch-mx28/iomux.h | 168 +++++++++
4 files changed, 817 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/mx28/iomux.c
create mode 100644 arch/arm/include/asm/arch-mx28/iomux-mx28.h
create mode 100644 arch/arm/include/asm/arch-mx28/iomux.h
diff --git a/arch/arm/cpu/arm926ejs/mx28/Makefile b/arch/arm/cpu/arm926ejs/mx28/Makefile
index 98504f9..7845310 100644
--- a/arch/arm/cpu/arm926ejs/mx28/Makefile
+++ b/arch/arm/cpu/arm926ejs/mx28/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS = clock.o mx28.o timer.o
+COBJS = clock.o mx28.o iomux.o timer.o
SRCS := $(START:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/arch/arm/cpu/arm926ejs/mx28/iomux.c b/arch/arm/cpu/arm926ejs/mx28/iomux.c
new file mode 100644
index 0000000..b086a9e
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx28/iomux.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/iomux.h>
+
+#if defined(CONFIG_MX23)
+#define DRIVE_OFFSET 0x200
+#define PULL_OFFSET 0x400
+#elif defined(CONFIG_MX28)
+#define DRIVE_OFFSET 0x300
+#define PULL_OFFSET 0x600
+#else
+#error "Please select CONFIG_MX23 or CONFIG_MX28"
+#endif
+
+/*
+ * configures a single pad in the iomuxer
+ */
+int mxs_iomux_setup_pad(iomux_cfg_t pad)
+{
+ u32 reg, ofs, bp, bm;
+ void *iomux_base = (void *)MXS_PINCTRL_BASE;
+ struct mx28_register *mxs_reg;
+
+ /* muxsel */
+ ofs = 0x100;
+ ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10;
+ bp = PAD_PIN(pad) % 16 * 2;
+ bm = 0x3 << bp;
+ reg = readl(iomux_base + ofs);
+ reg &= ~bm;
+ reg |= PAD_MUXSEL(pad) << bp;
+ writel(reg, iomux_base + ofs);
+
+ /* drive */
+ ofs = DRIVE_OFFSET;
+ ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10;
+ /* mA */
+ if (PAD_MA_VALID(pad)) {
+ bp = PAD_PIN(pad) % 8 * 4;
+ bm = 0x3 << bp;
+ reg = readl(iomux_base + ofs);
+ reg &= ~bm;
+ reg |= PAD_MA(pad) << bp;
+ writel(reg, iomux_base + ofs);
+ }
+ /* vol */
+ if (PAD_VOL_VALID(pad)) {
+ bp = PAD_PIN(pad) % 8 * 4 + 2;
+ mxs_reg = (struct mx28_register *)(iomux_base + ofs);
+ if (PAD_VOL(pad))
+ writel(1 << bp, &mxs_reg->reg_set);
+ else
+ writel(1 << bp, &mxs_reg->reg_clr);
+ }
+
+ /* pull */
+ if (PAD_PULL_VALID(pad)) {
+ ofs = PULL_OFFSET;
+ ofs += PAD_BANK(pad) * 0x10;
+ bp = PAD_PIN(pad);
+ mxs_reg = (struct mx28_register *)(iomux_base + ofs);
+ if (PAD_PULL(pad))
+ writel(1 << bp, &mxs_reg->reg_set);
+ else
+ writel(1 << bp, &mxs_reg->reg_clr);
+ }
+
+ return 0;
+}
+
+int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count)
+{
+ const iomux_cfg_t *p = pad_list;
+ int i;
+ int ret;
+
+ for (i = 0; i < count; i++) {
+ ret = mxs_iomux_setup_pad(*p);
+ if (ret)
+ return ret;
+ p++;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/include/asm/arch-mx28/iomux-mx28.h b/arch/arm/include/asm/arch-mx28/iomux-mx28.h
new file mode 100644
index 0000000..b42820d
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/iomux-mx28.h
@@ -0,0 +1,537 @@
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_IOMUX_MX28_H__
+#define __MACH_IOMUX_MX28_H__
+
+#include <asm/arch/iomux.h>
+
+/*
+ * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux.h
+ *
+ * BANK PIN MUX
+ */
+/* MUXSEL_0 */
+#define MX28_PAD_GPMI_D00__GPMI_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D01__GPMI_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D02__GPMI_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D03__GPMI_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D04__GPMI_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D05__GPMI_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D06__GPMI_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D07__GPMI_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
+
+#define MX28_PAD_LCD_D00__LCD_D0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D01__LCD_D1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D02__LCD_D2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D03__LCD_D3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D04__LCD_D4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D05__LCD_D5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D06__LCD_D6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D07__LCD_D7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D08__LCD_D8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D09__LCD_D9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D18__LCD_D18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D19__LCD_D19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D20__LCD_D20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D21__LCD_D21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D22__LCD_D22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D23__LCD_D23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RD_E__LCD_RD_E MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0)
+
+#define MX28_PAD_SSP0_DATA0__SSP0_D0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA1__SSP0_D1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA2__SSP0_D2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA3__SSP0_D3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA4__SSP0_D4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA5__SSP0_D5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA6__SSP0_D6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA7__SSP0_D7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_CMD__SSP0_CMD MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_SCK__SSP0_SCK MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_DATA0__SSP1_D0 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_DATA3__SSP1_D3 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SCK__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_MISO__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS0__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS1__SSP2_D4 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS2__SSP2_D5 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_SCK__SSP3_SCK MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_MISO__SSP3_D0 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_SS0__SSP3_D3 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
+
+#define MX28_PAD_AUART0_RX__AUART0_RX MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_TX__AUART0_TX MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_CTS__AUART0_CTS MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_RTS__AUART0_RTS MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_RX__AUART2_RX MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_TX__AUART2_TX MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_CTS__AUART2_CTS MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_RTS__AUART2_RTS MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_RX__AUART3_RX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_TX__AUART3_TX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_CTS__AUART3_CTS MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_RTS__AUART3_RTS MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
+#define MX28_PAD_PWM0__PWM_0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
+#define MX28_PAD_PWM1__PWM_1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
+#define MX28_PAD_PWM2__PWM_2 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0)
+#define MX28_PAD_I2C0_SCL__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0)
+#define MX28_PAD_I2C0_SDA__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0)
+#define MX28_PAD_SPDIF__SPDIF_TX MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0)
+#define MX28_PAD_PWM3__PWM_3 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0)
+#define MX28_PAD_PWM4__PWM_4 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0)
+
+#define MX28_PAD_ENET0_MDC__ENET0_MDC MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_COL__ENET0_COL MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_CRS__ENET0_CRS MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0)
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0)
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0)
+
+#define MX28_PAD_EMI_D00__EMI_DATA0 MXS_IOMUX_PAD_NAKED(5, 0, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D01__EMI_DATA1 MXS_IOMUX_PAD_NAKED(5, 1, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D02__EMI_DATA2 MXS_IOMUX_PAD_NAKED(5, 2, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D03__EMI_DATA3 MXS_IOMUX_PAD_NAKED(5, 3, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D04__EMI_DATA4 MXS_IOMUX_PAD_NAKED(5, 4, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D05__EMI_DATA5 MXS_IOMUX_PAD_NAKED(5, 5, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D06__EMI_DATA6 MXS_IOMUX_PAD_NAKED(5, 6, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D07__EMI_DATA7 MXS_IOMUX_PAD_NAKED(5, 7, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D08__EMI_DATA8 MXS_IOMUX_PAD_NAKED(5, 8, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D09__EMI_DATA9 MXS_IOMUX_PAD_NAKED(5, 9, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D10__EMI_DATA10 MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D11__EMI_DATA11 MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D12__EMI_DATA12 MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D13__EMI_DATA13 MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D14__EMI_DATA14 MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D15__EMI_DATA15 MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_ODT0__EMI_ODT0 MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_ODT1__EMI_ODT1 MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0)
+
+#define MX28_PAD_EMI_A00__EMI_ADDR0 MXS_IOMUX_PAD_NAKED(6, 0, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A01__EMI_ADDR1 MXS_IOMUX_PAD_NAKED(6, 1, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A02__EMI_ADDR2 MXS_IOMUX_PAD_NAKED(6, 2, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A03__EMI_ADDR3 MXS_IOMUX_PAD_NAKED(6, 3, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A04__EMI_ADDR4 MXS_IOMUX_PAD_NAKED(6, 4, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A05__EMI_ADDR5 MXS_IOMUX_PAD_NAKED(6, 5, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A06__EMI_ADDR6 MXS_IOMUX_PAD_NAKED(6, 6, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A07__EMI_ADDR7 MXS_IOMUX_PAD_NAKED(6, 7, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A08__EMI_ADDR8 MXS_IOMUX_PAD_NAKED(6, 8, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A09__EMI_ADDR9 MXS_IOMUX_PAD_NAKED(6, 9, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A10__EMI_ADDR10 MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A11__EMI_ADDR11 MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A12__EMI_ADDR12 MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A13__EMI_ADDR13 MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A14__EMI_ADDR14 MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA2__EMI_BA2 MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0)
+
+/* MUXSEL_1 */
+#define MX28_PAD_GPMI_D00__SSP1_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D01__SSP1_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D02__SSP1_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D03__SSP1_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D04__SSP1_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D05__SSP1_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D06__SSP1_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D07__SSP1_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE0N__SSP3_D0 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE1N__SSP3_D3 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE2N__CAN1_TX MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE3N__CAN1_RX MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY2__CAN0_TX MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY3__CAN0_RX MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDN__SSP3_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_WRN__SSP1_SCK MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_ALE__SSP3_D1 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CLE__SSP3_D2 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
+
+#define MX28_PAD_LCD_D03__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D04__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D08__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D09__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RS__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_CS__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
+
+#define MX28_PAD_SSP0_DATA4__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA5__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_SCK__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_CMD__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_DATA0__SSP2_D6 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_DATA3__SSP2_D7 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SCK__AUART2_RX MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_MOSI__AUART2_TX MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_MISO__AUART3_RX MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS0__AUART3_TX MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS1__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS2__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_SCK__AUART4_TX MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_MOSI__AUART4_RX MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_MISO__AUART4_RTS MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_SS0__AUART4_CTS MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1)
+
+#define MX28_PAD_AUART0_RX__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_TX__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_CTS__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_RTS__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_RTS__USB0_ID MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_RX__SSP3_D1 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_TX__SSP3_D2 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_CTS__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_RTS__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_RX__CAN0_TX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_TX__CAN0_RX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_CTS__CAN1_TX MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_RTS__CAN1_RX MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1)
+#define MX28_PAD_PWM0__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1)
+#define MX28_PAD_PWM1__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1)
+#define MX28_PAD_PWM2__USB0_ID MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_MCLK__PWM_3 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_LRCLK__PWM_4 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_BITCLK__PWM_5 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_SDATA0__PWM_6 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1)
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1)
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF1_SDATA0__PWM_7 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RESET__LCD_VSYNC MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1)
+
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1)
+
+/* MUXSEL_2 */
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY0__USB0_ID MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_ALE__SSP3_D4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_CLE__SSP3_D5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_LCD_D00__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D01__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D02__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D03__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D04__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D05__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D06__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D07__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D08__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D09__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D10__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D11__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D12__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D13__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D14__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D15__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D16__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D17__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D18__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D19__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D20__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D21__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D22__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D23__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_RD_E__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
+
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_AUART0_RX__DUART_CTS MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_TX__DUART_RTS MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_CTS__DUART_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_RTS__DUART_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_RX__PWM_0 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_TX__PWM_1 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_RX__SSP3_D4 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_TX__SSP3_D5 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2)
+#define MX28_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2)
+#define MX28_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2)
+#define MX28_PAD_PWM2__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2)
+#define MX28_PAD_I2C0_SCL__DUART_RX MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2)
+#define MX28_PAD_I2C0_SDA__DUART_TX MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2)
+#define MX28_PAD_SPDIF__ENET1_RX_ER MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2)
+
+/* MUXSEL_GPIO */
+#define MX28_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_WRN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_ALE__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CLE__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D18__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D19__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D20__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D21__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D22__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D23__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RD_E__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RS__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_CS__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31 MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_CMD__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_SCK__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_SCK__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_CMD__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SCK__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_MISO__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS0__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS1__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS2__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_SCK__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_MISO__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_SS0__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_AUART0_RX__GPIO_3_0 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_TX__GPIO_3_1 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_CTS__GPIO_3_2 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_RTS__GPIO_3_3 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_RX__GPIO_3_4 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_TX__GPIO_3_5 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_CTS__GPIO_3_6 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_RTS__GPIO_3_7 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_RX__GPIO_3_8 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_TX__GPIO_3_9 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_CTS__GPIO_3_10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_RTS__GPIO_3_11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_RX__GPIO_3_12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_TX__GPIO_3_13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_CTS__GPIO_3_14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_RTS__GPIO_3_15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM0__GPIO_3_16 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM1__GPIO_3_17 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM2__GPIO_3_18 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_I2C0_SCL__GPIO_3_24 MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_I2C0_SDA__GPIO_3_25 MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SPDIF__GPIO_3_27 MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM3__GPIO_3_28 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM4__GPIO_3_29 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RESET__GPIO_3_30 MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_ENET0_MDC__GPIO_4_0 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5 MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13 MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_COL__GPIO_4_14 MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_CRS__GPIO_4_15 MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET_CLK__GPIO_4_16 MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20 MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO)
+
+#endif /* __MACH_IOMUX_MX28_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/iomux.h b/arch/arm/include/asm/arch-mx28/iomux.h
new file mode 100644
index 0000000..7abdf58
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/iomux.h
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_MXS_IOMUX_H__
+#define __MACH_MXS_IOMUX_H__
+
+/*
+ * IOMUX/PAD Bit field definitions
+ *
+ * PAD_BANK: 0..2 (3)
+ * PAD_PIN: 3..7 (5)
+ * PAD_MUXSEL: 8..9 (2)
+ * PAD_MA: 10..11 (2)
+ * PAD_MA_VALID: 12 (1)
+ * PAD_VOL: 13 (1)
+ * PAD_VOL_VALID: 14 (1)
+ * PAD_PULL: 15 (1)
+ * PAD_PULL_VALID: 16 (1)
+ * RESERVED: 17..31 (15)
+ */
+typedef u32 iomux_cfg_t;
+
+#define MXS_PAD_BANK_SHIFT 0
+#define MXS_PAD_BANK_MASK ((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT)
+#define MXS_PAD_PIN_SHIFT 3
+#define MXS_PAD_PIN_MASK ((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT)
+#define MXS_PAD_MUXSEL_SHIFT 8
+#define MXS_PAD_MUXSEL_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT)
+#define MXS_PAD_MA_SHIFT 10
+#define MXS_PAD_MA_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT)
+#define MXS_PAD_MA_VALID_SHIFT 12
+#define MXS_PAD_MA_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT)
+#define MXS_PAD_VOL_SHIFT 13
+#define MXS_PAD_VOL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT)
+#define MXS_PAD_VOL_VALID_SHIFT 14
+#define MXS_PAD_VOL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT)
+#define MXS_PAD_PULL_SHIFT 15
+#define MXS_PAD_PULL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT)
+#define MXS_PAD_PULL_VALID_SHIFT 16
+#define MXS_PAD_PULL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT)
+
+#define PAD_MUXSEL_0 0
+#define PAD_MUXSEL_1 1
+#define PAD_MUXSEL_2 2
+#define PAD_MUXSEL_GPIO 3
+
+#define PAD_4MA 0
+#define PAD_8MA 1
+#define PAD_12MA 2
+#define PAD_16MA 3
+
+#define PAD_1V8 0
+#define PAD_3V3 1
+
+#define PAD_NOPULL 0
+#define PAD_PULLUP 1
+
+#define MXS_PAD_4MA ((PAD_4MA << MXS_PAD_MA_SHIFT) | \
+ MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_8MA ((PAD_8MA << MXS_PAD_MA_SHIFT) | \
+ MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_12MA ((PAD_12MA << MXS_PAD_MA_SHIFT) | \
+ MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_16MA ((PAD_16MA << MXS_PAD_MA_SHIFT) | \
+ MXS_PAD_MA_VALID_MASK)
+
+#define MXS_PAD_1V8 ((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \
+ MXS_PAD_VOL_VALID_MASK)
+#define MXS_PAD_3V3 ((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \
+ MXS_PAD_VOL_VALID_MASK)
+
+#define MXS_PAD_NOPULL ((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \
+ MXS_PAD_PULL_VALID_MASK)
+#define MXS_PAD_PULLUP ((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
+ MXS_PAD_PULL_VALID_MASK)
+
+/* generic pad control used in most cases */
+#define MXS_PAD_CTRL (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
+
+#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull) \
+ (((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) | \
+ ((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) | \
+ ((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) | \
+ ((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) | \
+ ((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) | \
+ ((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT))
+
+/*
+ * A pad becomes naked, when none of mA, vol or pull
+ * validity bits is set.
+ */
+#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \
+ MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0)
+
+static inline unsigned int PAD_BANK(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT;
+}
+
+static inline unsigned int PAD_PIN(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT;
+}
+
+static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT;
+}
+
+static inline unsigned int PAD_MA(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT;
+}
+
+static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT;
+}
+
+static inline unsigned int PAD_VOL(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT;
+}
+
+static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT;
+}
+
+static inline unsigned int PAD_PULL(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT;
+}
+
+static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT;
+}
+
+/*
+ * configures a single pad in the iomuxer
+ */
+int mxs_iomux_setup_pad(iomux_cfg_t pad);
+
+/*
+ * configures multiple pads
+ * convenient way to call the above function with tables
+ */
+int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
+
+#endif /* __MACH_MXS_IOMUX_H__*/
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 10/31] iMX28: Add RTC register definitions
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (8 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 09/31] iMX28: Add PINMUX control Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 11/31] iMX28: Add I2C " Marek Vasut
` (20 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
arch/arm/include/asm/arch-mx28/regs-rtc.h | 143 +++++++++++++++++++++++++++++
1 files changed, 143 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/asm/arch-mx28/regs-rtc.h
diff --git a/arch/arm/include/asm/arch-mx28/regs-rtc.h b/arch/arm/include/asm/arch-mx28/regs-rtc.h
new file mode 100644
index 0000000..412f32d
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-rtc.h
@@ -0,0 +1,143 @@
+/*
+ * Freescale i.MX28 RTC Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_RTC_H__
+#define __REGS_RTC_H__
+
+struct mx28_rtc_regs {
+ mx28_reg(hw_rtc_ctrl)
+ mx28_reg(hw_rtc_stat)
+ mx28_reg(hw_rtc_milliseconds)
+ mx28_reg(hw_rtc_seconds)
+ mx28_reg(hw_rtc_rtc_alarm)
+ mx28_reg(hw_rtc_watchdog)
+ mx28_reg(hw_rtc_persistent0)
+ mx28_reg(hw_rtc_persistent1)
+ mx28_reg(hw_rtc_persistent2)
+ mx28_reg(hw_rtc_persistent3)
+ mx28_reg(hw_rtc_persistent4)
+ mx28_reg(hw_rtc_persistent5)
+ mx28_reg(hw_rtc_debug)
+ mx28_reg(hw_rtc_version)
+};
+
+#define RTC_CTRL_SFTRST (1 << 31)
+#define RTC_CTRL_CLKGATE (1 << 30)
+#define RTC_CTRL_SUPPRESS_COPY2ANALOG (1 << 6)
+#define RTC_CTRL_FORCE_UPDATE (1 << 5)
+#define RTC_CTRL_WATCHDOGEN (1 << 4)
+#define RTC_CTRL_ONEMSEC_IRQ (1 << 3)
+#define RTC_CTRL_ALARM_IRQ (1 << 2)
+#define RTC_CTRL_ONEMSEC_IRQ_EN (1 << 1)
+#define RTC_CTRL_ALARM_IRQ_EN (1 << 0)
+
+#define RTC_STAT_RTC_PRESENT (1 << 31)
+#define RTC_STAT_ALARM_PRESENT (1 << 30)
+#define RTC_STAT_WATCHDOG_PRESENT (1 << 29)
+#define RTC_STAT_XTAL32000_PRESENT (1 << 28)
+#define RTC_STAT_XTAL32768_PRESENT (1 << 27)
+#define RTC_STAT_STALE_REGS_MASK (0xff << 16)
+#define RTC_STAT_STALE_REGS_OFFSET 16
+#define RTC_STAT_NEW_REGS_MASK (0xff << 8)
+#define RTC_STAT_NEW_REGS_OFFSET 8
+
+#define RTC_MILLISECONDS_COUNT_MASK 0xffffffff
+#define RTC_MILLISECONDS_COUNT_OFFSET 0
+
+#define RTC_SECONDS_COUNT_MASK 0xffffffff
+#define RTC_SECONDS_COUNT_OFFSET 0
+
+#define RTC_ALARM_VALUE_MASK 0xffffffff
+#define RTC_ALARM_VALUE_OFFSET 0
+
+#define RTC_WATCHDOG_COUNT_MASK 0xffffffff
+#define RTC_WATCHDOG_COUNT_OFFSET 0
+
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_MASK (0xf << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_OFFSET 28
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V83 (0x0 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V78 (0x1 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V73 (0x2 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V68 (0x3 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V62 (0x4 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V57 (0x5 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V52 (0x6 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V48 (0x7 << 28)
+#define RTC_PERSISTENT0_EXTERNAL_RESET (1 << 21)
+#define RTC_PERSISTENT0_THERMAL_RESET (1 << 20)
+#define RTC_PERSISTENT0_ENABLE_LRADC_PWRUP (1 << 18)
+#define RTC_PERSISTENT0_AUTO_RESTART (1 << 17)
+#define RTC_PERSISTENT0_DISABLE_PSWITCH (1 << 16)
+#define RTC_PERSISTENT0_LOWERBIAS_MASK (0xf << 14)
+#define RTC_PERSISTENT0_LOWERBIAS_OFFSET 14
+#define RTC_PERSISTENT0_LOWERBIAS_NOMINAL (0x0 << 14)
+#define RTC_PERSISTENT0_LOWERBIAS_M25P (0x1 << 14)
+#define RTC_PERSISTENT0_LOWERBIAS_M50P (0x3 << 14)
+#define RTC_PERSISTENT0_DISABLE_XTALOK (1 << 13)
+#define RTC_PERSISTENT0_MSEC_RES_MASK (0x1f << 8)
+#define RTC_PERSISTENT0_MSEC_RES_OFFSET 8
+#define RTC_PERSISTENT0_MSEC_RES_1MS (0x01 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_2MS (0x02 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_4MS (0x04 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_8MS (0x08 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_16MS (0x10 << 8)
+#define RTC_PERSISTENT0_ALARM_WAKE (1 << 7)
+#define RTC_PERSISTENT0_XTAL32_FREQ (1 << 6)
+#define RTC_PERSISTENT0_XTAL32KHZ_PWRUP (1 << 5)
+#define RTC_PERSISTENT0_XTAL24KHZ_PWRUP (1 << 4)
+#define RTC_PERSISTENT0_LCK_SECS (1 << 3)
+#define RTC_PERSISTENT0_ALARM_EN (1 << 2)
+#define RTC_PERSISTENT0_ALARM_WAKE_EN (1 << 1)
+#define RTC_PERSISTENT0_CLOCKSOURCE (1 << 0)
+
+#define RTC_PERSISTENT1_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT1_GENERAL_OFFSET 0
+#define RTC_PERSISTENT1_GENERAL_OTG_ALT_ROLE 0x0080
+#define RTC_PERSISTENT1_GENERAL_OTG_HNP 0x0100
+#define RTC_PERSISTENT1_GENERAL_USB_LPM 0x0200
+#define RTC_PERSISTENT1_GENERAL_SKIP_CHECKDISK 0x0400
+#define RTC_PERSISTENT1_GENERAL_USB_BOOT_PLAYER 0x0800
+#define RTC_PERSISTENT1_GENERAL_ENUM_500MA_2X 0x1000
+
+#define RTC_PERSISTENT2_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT2_GENERAL_OFFSET 0
+
+#define RTC_PERSISTENT3_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT3_GENERAL_OFFSET 0
+
+#define RTC_PERSISTENT4_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT4_GENERAL_OFFSET 0
+
+#define RTC_PERSISTENT5_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT5_GENERAL_OFFSET 0
+
+#define RTC_DEBUG_WATCHDOG_RESET_MASK (1 << 1)
+#define RTC_DEBUG_WATCHDOG_RESET (1 << 0)
+
+#define RTC_VERSION_MAJOR_MASK (0xff << 24)
+#define RTC_VERSION_MAJOR_OFFSET 24
+#define RTC_VERSION_MINOR_MASK (0xff << 16)
+#define RTC_VERSION_MINOR_OFFSET 16
+#define RTC_VERSION_STEP_MASK 0xffff
+#define RTC_VERSION_STEP_OFFSET 0
+
+#endif /* __REGS_RTC_H__ */
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 11/31] iMX28: Add I2C register definitions
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (9 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 10/31] iMX28: Add RTC register definitions Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-09 5:44 ` Heiko Schocher
2011-09-08 20:42 ` [U-Boot] [PATCH 12/31] iMX28: Add I2C bus driver Marek Vasut
` (19 subsequent siblings)
30 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
arch/arm/include/asm/arch-mx28/regs-i2c.h | 203 +++++++++++++++++++++++++++++
1 files changed, 203 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/asm/arch-mx28/regs-i2c.h
diff --git a/arch/arm/include/asm/arch-mx28/regs-i2c.h b/arch/arm/include/asm/arch-mx28/regs-i2c.h
new file mode 100644
index 0000000..1bb20c3
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-i2c.h
@@ -0,0 +1,203 @@
+/*
+ * Freescale i.MX28 I2C Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_I2C_H__
+#define __REGS_I2C_H__
+
+struct mx28_i2c_regs {
+ mx28_reg(hw_i2c_ctrl0)
+ mx28_reg(hw_i2c_timing0)
+ mx28_reg(hw_i2c_timing1)
+ mx28_reg(hw_i2c_timing2)
+ mx28_reg(hw_i2c_ctrl1)
+ mx28_reg(hw_i2c_stat)
+ mx28_reg(hw_i2c_queuectrl)
+ mx28_reg(hw_i2c_queuestat)
+ mx28_reg(hw_i2c_queuecmd)
+ mx28_reg(hw_i2c_queuedata)
+ mx28_reg(hw_i2c_data)
+ mx28_reg(hw_i2c_debug0)
+ mx28_reg(hw_i2c_debug1)
+ mx28_reg(hw_i2c_version)
+};
+
+#define I2C_CTRL_SFTRST (1 << 31)
+#define I2C_CTRL_CLKGATE (1 << 30)
+#define I2C_CTRL_RUN (1 << 29)
+#define I2C_CTRL_PREACK (1 << 27)
+#define I2C_CTRL_ACKNOWLEDGE (1 << 26)
+#define I2C_CTRL_SEND_NAK_ON_LAST (1 << 25)
+#define I2C_CTRL_MULTI_MASTER (1 << 23)
+#define I2C_CTRL_CLOCK_HELD (1 << 22)
+#define I2C_CTRL_RETAIN_CLOCK (1 << 21)
+#define I2C_CTRL_POST_SEND_STOP (1 << 20)
+#define I2C_CTRL_PRE_SEND_START (1 << 19)
+#define I2C_CTRL_SLAVE_ADDRESS_ENABLE (1 << 18)
+#define I2C_CTRL_MASTER_MODE (1 << 17)
+#define I2C_CTRL_DIRECTION (1 << 16)
+#define I2C_CTRL_XFER_COUNT_MASK 0xffff
+#define I2C_CTRL_XFER_COUNT_OFFSET 0
+
+#define I2C_TIMING0_HIGH_COUNT_MASK (0x3ff << 16)
+#define I2C_TIMING0_HIGH_COUNT_OFFSET 16
+#define I2C_TIMING0_RCV_COUNT_MASK 0x3ff
+#define I2C_TIMING0_RCV_COUNT_OFFSET 0
+
+#define I2C_TIMING1_LOW_COUNT_MASK (0x3ff << 16)
+#define I2C_TIMING1_LOW_COUNT_OFFSET 16
+#define I2C_TIMING1_XMIT_COUNT_MASK 0x3ff
+#define I2C_TIMING1_XMIT_COUNT_OFFSET 0
+
+#define I2C_TIMING2_BUS_FREE_MASK (0x3ff << 16)
+#define I2C_TIMING2_BUS_FREE_OFFSET 16
+#define I2C_TIMING2_LEADIN_COUNT_MASK 0x3ff
+#define I2C_TIMING2_LEADIN_COUNT_OFFSET 0
+
+#define I2C_CTRL1_RD_QUEUE_IRQ (1 << 30)
+#define I2C_CTRL1_WR_QUEUE_IRQ (1 << 29)
+#define I2C_CTRL1_CLR_GOT_A_NAK (1 << 28)
+#define I2C_CTRL1_ACK_MODE (1 << 27)
+#define I2C_CTRL1_FORCE_DATA_IDLE (1 << 26)
+#define I2C_CTRL1_FORCE_CLK_IDLE (1 << 25)
+#define I2C_CTRL1_BCAST_SLAVE_EN (1 << 24)
+#define I2C_CTRL1_SLAVE_ADDRESS_BYTE_MASK (0xff << 16)
+#define I2C_CTRL1_SLAVE_ADDRESS_BYTE_OFFSET 16
+#define I2C_CTRL1_BUS_FREE_IRQ_EN (1 << 15)
+#define I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ_EN (1 << 14)
+#define I2C_CTRL1_NO_SLAVE_ACK_IRQ_EN (1 << 13)
+#define I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ_EN (1 << 12)
+#define I2C_CTRL1_EARLY_TERM_IRQ_EN (1 << 11)
+#define I2C_CTRL1_MASTER_LOSS_IRQ_EN (1 << 10)
+#define I2C_CTRL1_SLAVE_STOP_IRQ_EN (1 << 9)
+#define I2C_CTRL1_SLAVE_IRQ_EN (1 << 8)
+#define I2C_CTRL1_BUS_FREE_IRQ (1 << 7)
+#define I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ (1 << 6)
+#define I2C_CTRL1_NO_SLAVE_ACK_IRQ (1 << 5)
+#define I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ (1 << 4)
+#define I2C_CTRL1_EARLY_TERM_IRQ (1 << 3)
+#define I2C_CTRL1_MASTER_LOSS_IRQ (1 << 2)
+#define I2C_CTRL1_SLAVE_STOP_IRQ (1 << 1)
+#define I2C_CTRL1_SLAVE_IRQ (1 << 0)
+
+#define I2C_STAT_MASTER_PRESENT (1 << 31)
+#define I2C_STAT_SLAVE_PRESENT (1 << 30)
+#define I2C_STAT_ANY_ENABLED_IRQ (1 << 29)
+#define I2C_STAT_GOT_A_NAK (1 << 28)
+#define I2C_STAT_RCVD_SLAVE_ADDR_MASK (0xff << 16)
+#define I2C_STAT_RCVD_SLAVE_ADDR_OFFSET 16
+#define I2C_STAT_SLAVE_ADDR_EQ_ZERO (1 << 15)
+#define I2C_STAT_SLAVE_FOUND (1 << 14)
+#define I2C_STAT_SLAVE_SEARCHING (1 << 13)
+#define I2C_STAT_DATA_ENGING_DMA_WAIT (1 << 12)
+#define I2C_STAT_BUS_BUSY (1 << 11)
+#define I2C_STAT_CLK_GEN_BUSY (1 << 10)
+#define I2C_STAT_DATA_ENGINE_BUSY (1 << 9)
+#define I2C_STAT_SLAVE_BUSY (1 << 8)
+#define I2C_STAT_BUS_FREE_IRQ_SUMMARY (1 << 7)
+#define I2C_STAT_DATA_ENGINE_CMPLT_IRQ_SUMMARY (1 << 6)
+#define I2C_STAT_NO_SLAVE_ACK_IRQ_SUMMARY (1 << 5)
+#define I2C_STAT_OVERSIZE_XFER_TERM_IRQ_SUMMARY (1 << 4)
+#define I2C_STAT_EARLY_TERM_IRQ_SUMMARY (1 << 3)
+#define I2C_STAT_MASTER_LOSS_IRQ_SUMMARY (1 << 2)
+#define I2C_STAT_SLAVE_STOP_IRQ_SUMMARY (1 << 1)
+#define I2C_STAT_SLAVE_IRQ_SUMMARY (1 << 0)
+
+#define I2C_QUEUECTRL_RD_THRESH_MASK (0x1f << 16)
+#define I2C_QUEUECTRL_RD_THRESH_OFFSET 16
+#define I2C_QUEUECTRL_WR_THRESH_MASK (0x1f << 8)
+#define I2C_QUEUECTRL_WR_THRESH_OFFSET 8
+#define I2C_QUEUECTRL_QUEUE_RUN (1 << 5)
+#define I2C_QUEUECTRL_RD_CLEAR (1 << 4)
+#define I2C_QUEUECTRL_WR_CLEAR (1 << 3)
+#define I2C_QUEUECTRL_PIO_QUEUE_MODE (1 << 2)
+#define I2C_QUEUECTRL_RD_QUEUE_IRQ_EN (1 << 1)
+#define I2C_QUEUECTRL_WR_QUEUE_IRQ_EN (1 << 0)
+
+#define I2C_QUEUESTAT_RD_QUEUE_FULL (1 << 14)
+#define I2C_QUEUESTAT_RD_QUEUE_EMPTY (1 << 13)
+#define I2C_QUEUESTAT_RD_QUEUE_CNT_MASK (0x1f << 8)
+#define I2C_QUEUESTAT_RD_QUEUE_CNT_OFFSET 8
+#define I2C_QUEUESTAT_WR_QUEUE_FULL (1 << 6)
+#define I2C_QUEUESTAT_WR_QUEUE_EMPTY (1 << 5)
+#define I2C_QUEUESTAT_WR_QUEUE_CNT_MASK 0x1f
+#define I2C_QUEUESTAT_WR_QUEUE_CNT_OFFSET 0
+
+#define I2C_QUEUECMD_PREACK (1 << 27)
+#define I2C_QUEUECMD_ACKNOWLEDGE (1 << 26)
+#define I2C_QUEUECMD_SEND_NAK_ON_LAST (1 << 25)
+#define I2C_QUEUECMD_MULTI_MASTER (1 << 23)
+#define I2C_QUEUECMD_CLOCK_HELD (1 << 22)
+#define I2C_QUEUECMD_RETAIN_CLOCK (1 << 21)
+#define I2C_QUEUECMD_POST_SEND_STOP (1 << 20)
+#define I2C_QUEUECMD_PRE_SEND_START (1 << 19)
+#define I2C_QUEUECMD_SLAVE_ADDRESS_ENABLE (1 << 18)
+#define I2C_QUEUECMD_MASTER_MODE (1 << 17)
+#define I2C_QUEUECMD_DIRECTION (1 << 16)
+#define I2C_QUEUECMD_XFER_COUNT_MASK 0xffff
+#define I2C_QUEUECMD_XFER_COUNT_OFFSET 0
+
+#define I2C_QUEUEDATA_DATA_MASK 0xffffffff
+#define I2C_QUEUEDATA_DATA_OFFSET 0
+
+#define I2C_DATA_DATA_MASK 0xffffffff
+#define I2C_DATA_DATA_OFFSET 0
+
+#define I2C_DEBUG0_DMAREQ (1 << 31)
+#define I2C_DEBUG0_DMAENDCMD (1 << 30)
+#define I2C_DEBUG0_DMAKICK (1 << 29)
+#define I2C_DEBUG0_DMATERMINATE (1 << 28)
+#define I2C_DEBUG0_STATE_VALUE_MASK (0x3 << 26)
+#define I2C_DEBUG0_STATE_VALUE_OFFSET 26
+#define I2C_DEBUG0_DMA_STATE_MASK (0x3ff << 16)
+#define I2C_DEBUG0_DMA_STATE_OFFSET 16
+#define I2C_DEBUG0_START_TOGGLE (1 << 15)
+#define I2C_DEBUG0_STOP_TOGGLE (1 << 14)
+#define I2C_DEBUG0_GRAB_TOGGLE (1 << 13)
+#define I2C_DEBUG0_CHANGE_TOGGLE (1 << 12)
+#define I2C_DEBUG0_STATE_LATCH (1 << 11)
+#define I2C_DEBUG0_SLAVE_HOLD_CLK (1 << 10)
+#define I2C_DEBUG0_STATE_STATE_MASK 0x3ff
+#define I2C_DEBUG0_STATE_STATE_OFFSET 0
+
+#define I2C_DEBUG1_I2C_CLK_IN (1 << 31)
+#define I2C_DEBUG1_I2C_DATA_IN (1 << 30)
+#define I2C_DEBUG1_DMA_BYTE_ENABLES_MASK (0xf << 24)
+#define I2C_DEBUG1_DMA_BYTE_ENABLES_OFFSET 24
+#define I2C_DEBUG1_CLK_GEN_STATE_MASK (0xff << 16)
+#define I2C_DEBUG1_CLK_GEN_STATE_OFFSET 16
+#define I2C_DEBUG1_LST_MODE_MASK (0x3 << 9)
+#define I2C_DEBUG1_LST_MODE_OFFSET 9
+#define I2C_DEBUG1_LOCAL_SLAVE_TEST (1 << 8)
+#define I2C_DEBUG1_FORCE_CLK_ON (1 << 4)
+#define I2C_DEBUG1_FORCE_ABR_LOSS (1 << 3)
+#define I2C_DEBUG1_FORCE_RCV_ACK (1 << 2)
+#define I2C_DEBUG1_FORCE_I2C_DATA_OE (1 << 1)
+#define I2C_DEBUG1_FORCE_I2C_CLK_OE (1 << 0)
+
+#define I2C_VERSION_MAJOR_MASK (0xff << 24)
+#define I2C_VERSION_MAJOR_OFFSET 24
+#define I2C_VERSION_MINOR_MASK (0xff << 16)
+#define I2C_VERSION_MINOR_OFFSET 16
+#define I2C_VERSION_STEP_MASK 0xffff
+#define I2C_VERSION_STEP_OFFSET 0
+
+#endif /* __REGS_I2C_H__ */
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 11/31] iMX28: Add I2C register definitions
2011-09-08 20:42 ` [U-Boot] [PATCH 11/31] iMX28: Add I2C " Marek Vasut
@ 2011-09-09 5:44 ` Heiko Schocher
0 siblings, 0 replies; 68+ messages in thread
From: Heiko Schocher @ 2011-09-09 5:44 UTC (permalink / raw)
To: u-boot
Hello Marek,
Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>
> ---
> arch/arm/include/asm/arch-mx28/regs-i2c.h | 203 +++++++++++++++++++++++++++++
> 1 files changed, 203 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-mx28/regs-i2c.h
Patch looks good to me, but one minor comment:
> diff --git a/arch/arm/include/asm/arch-mx28/regs-i2c.h b/arch/arm/include/asm/arch-mx28/regs-i2c.h
> new file mode 100644
> index 0000000..1bb20c3
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-mx28/regs-i2c.h
> @@ -0,0 +1,203 @@
> +/*
> + * Freescale i.MX28 I2C Register Definitions
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + */
> +
> +#ifndef __REGS_I2C_H__
> +#define __REGS_I2C_H__
Please use here a more driver specific name, for example __MX28_REGS_I2C__
If you change that, you get my:
Acked-by: Heiko Schocher<hs@denx.de>
(I think, Stefano pick up the complete Patchserie, or?)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 12/31] iMX28: Add I2C bus driver
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (10 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 11/31] iMX28: Add I2C " Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-09 5:45 ` Heiko Schocher
2011-09-08 20:42 ` [U-Boot] [PATCH 13/31] M28: Enable I2C, EEPROM and RTC Marek Vasut
` (18 subsequent siblings)
30 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
drivers/i2c/Makefile | 1 +
drivers/i2c/mxs_i2c.c | 243 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 244 insertions(+), 0 deletions(-)
create mode 100644 drivers/i2c/mxs_i2c.c
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index a48047a..2fb521e 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -31,6 +31,7 @@ COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o
COBJS-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
COBJS-$(CONFIG_I2C_MV) += mv_i2c.o
COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
+COBJS-$(CONFIG_I2C_MXS) += mxs_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
diff --git a/drivers/i2c/mxs_i2c.c b/drivers/i2c/mxs_i2c.c
new file mode 100644
index 0000000..cae50b1
--- /dev/null
+++ b/drivers/i2c/mxs_i2c.c
@@ -0,0 +1,243 @@
+/*
+ * Freescale i.MX28 I2C Driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-i2c.h>
+#include <asm/arch/mx28.h>
+
+#define MXS_I2C_MAX_TIMEOUT 1000000
+
+void mxs_i2c_reset(void)
+{
+ struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
+ int ret;
+
+ ret = mx28_reset_block(&i2c_regs->hw_i2c_ctrl0_reg);
+ if (ret) {
+ debug("MXS I2C: Block reset timeout\n");
+ return;
+ }
+
+ writel(I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ | I2C_CTRL1_NO_SLAVE_ACK_IRQ |
+ I2C_CTRL1_EARLY_TERM_IRQ | I2C_CTRL1_MASTER_LOSS_IRQ |
+ I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ,
+ &i2c_regs->hw_i2c_ctrl1_clr);
+
+ writel(I2C_QUEUECTRL_PIO_QUEUE_MODE, &i2c_regs->hw_i2c_queuectrl_set);
+}
+
+void mxs_i2c_setup_read(uint8_t chip, int len)
+{
+ struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
+
+ writel(I2C_QUEUECMD_RETAIN_CLOCK | I2C_QUEUECMD_PRE_SEND_START |
+ I2C_QUEUECMD_MASTER_MODE | I2C_QUEUECMD_DIRECTION |
+ (1 << I2C_QUEUECMD_XFER_COUNT_OFFSET),
+ &i2c_regs->hw_i2c_queuecmd);
+
+ writel((chip << 1) | 1, &i2c_regs->hw_i2c_data);
+
+ writel(I2C_QUEUECMD_SEND_NAK_ON_LAST | I2C_QUEUECMD_MASTER_MODE |
+ (len << I2C_QUEUECMD_XFER_COUNT_OFFSET) |
+ I2C_QUEUECMD_POST_SEND_STOP, &i2c_regs->hw_i2c_queuecmd);
+
+ writel(I2C_QUEUECTRL_QUEUE_RUN, &i2c_regs->hw_i2c_queuectrl_set);
+}
+
+void mxs_i2c_write(uchar chip, uint addr, int alen,
+ uchar *buf, int blen, int stop)
+{
+ struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
+ uint32_t data;
+ int i, remain, off;
+
+ if ((alen > 4) || (alen == 0)) {
+ debug("MXS I2C: Invalid address length\n");
+ return;
+ }
+
+ if (stop)
+ stop = I2C_QUEUECMD_POST_SEND_STOP;
+
+ writel(I2C_QUEUECMD_PRE_SEND_START |
+ I2C_QUEUECMD_MASTER_MODE | I2C_QUEUECMD_DIRECTION |
+ ((blen + alen + 1) << I2C_QUEUECMD_XFER_COUNT_OFFSET) | stop,
+ &i2c_regs->hw_i2c_queuecmd);
+
+ data = (chip << 1) << 24;
+
+ for (i = 0; i < alen; i++) {
+ data >>= 8;
+ data |= ((char *)&addr)[i] << 24;
+ if ((i & 3) == 2)
+ writel(data, &i2c_regs->hw_i2c_data);
+ }
+
+ off = i;
+ for (; i < off + blen; i++) {
+ data >>= 8;
+ data |= buf[i - off] << 24;
+ if ((i & 3) == 2)
+ writel(data, &i2c_regs->hw_i2c_data);
+ }
+
+ remain = 24 - ((i & 3) * 8);
+ if (remain)
+ writel(data >> remain, &i2c_regs->hw_i2c_data);
+
+ writel(I2C_QUEUECTRL_QUEUE_RUN, &i2c_regs->hw_i2c_queuectrl_set);
+}
+
+int mxs_i2c_wait_for_ack(void)
+{
+ struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
+ uint32_t tmp;
+ int timeout = MXS_I2C_MAX_TIMEOUT;
+
+ for (;;) {
+ tmp = readl(&i2c_regs->hw_i2c_ctrl1);
+ if (tmp & I2C_CTRL1_NO_SLAVE_ACK_IRQ) {
+ debug("MXS I2C: No slave ACK\n");
+ goto err;
+ }
+
+ if (tmp & (
+ I2C_CTRL1_EARLY_TERM_IRQ | I2C_CTRL1_MASTER_LOSS_IRQ |
+ I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ
+ )) {
+ debug("MXS I2C: Error (CTRL1 = %08x)\n", tmp);
+ goto err;
+ }
+
+ if (tmp & I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ)
+ break;
+
+ if (!timeout--) {
+ debug("MXS I2C: Operation timed out\n");
+ goto err;
+ }
+
+ udelay(1);
+ }
+
+ return 0;
+
+err:
+ mxs_i2c_reset();
+ return 1;
+}
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+ struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
+ uint32_t tmp = 0;
+ int ret;
+ int i;
+
+ mxs_i2c_write(chip, addr, alen, NULL, 0, 0);
+ ret = mxs_i2c_wait_for_ack();
+ if (ret) {
+ debug("MXS I2C: Failed writing address\n");
+ return ret;
+ }
+
+ mxs_i2c_setup_read(chip, len);
+ ret = mxs_i2c_wait_for_ack();
+ if (ret) {
+ debug("MXS I2C: Failed reading address\n");
+ return ret;
+ }
+
+ for (i = 0; i < len; i++) {
+ if (!(i & 3)) {
+ while (readl(&i2c_regs->hw_i2c_queuestat) &
+ I2C_QUEUESTAT_RD_QUEUE_EMPTY)
+ ;
+ tmp = readl(&i2c_regs->hw_i2c_queuedata);
+ }
+ buffer[i] = tmp & 0xff;
+ tmp >>= 8;
+ }
+
+ return 0;
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+ int ret;
+ mxs_i2c_write(chip, addr, alen, buffer, len, 1);
+ ret = mxs_i2c_wait_for_ack();
+ if (ret)
+ debug("MXS I2C: Failed writing address\n");
+
+ return ret;
+}
+
+int i2c_probe(uchar chip)
+{
+ int ret;
+ mxs_i2c_write(chip, 0, 1, NULL, 0, 1);
+ ret = mxs_i2c_wait_for_ack();
+ mxs_i2c_reset();
+ return ret;
+}
+
+void i2c_init(int speed, int slaveadd)
+{
+ struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
+
+ mxs_i2c_reset();
+
+ switch (speed) {
+ case 100000:
+ writel((0x0078 << I2C_TIMING0_HIGH_COUNT_OFFSET) |
+ (0x0030 << I2C_TIMING0_RCV_COUNT_OFFSET),
+ &i2c_regs->hw_i2c_timing0);
+ writel((0x0080 << I2C_TIMING1_LOW_COUNT_OFFSET) |
+ (0x0030 << I2C_TIMING1_XMIT_COUNT_OFFSET),
+ &i2c_regs->hw_i2c_timing1);
+ break;
+ case 400000:
+ writel((0x000f << I2C_TIMING0_HIGH_COUNT_OFFSET) |
+ (0x0007 << I2C_TIMING0_RCV_COUNT_OFFSET),
+ &i2c_regs->hw_i2c_timing0);
+ writel((0x001f << I2C_TIMING1_LOW_COUNT_OFFSET) |
+ (0x000f << I2C_TIMING1_XMIT_COUNT_OFFSET),
+ &i2c_regs->hw_i2c_timing1);
+ break;
+ default:
+ printf("MXS I2C: Invalid speed selected (%d Hz)\n", speed);
+ return;
+ }
+
+ writel((0x0015 << I2C_TIMING2_BUS_FREE_OFFSET) |
+ (0x000d << I2C_TIMING2_LEADIN_COUNT_OFFSET),
+ &i2c_regs->hw_i2c_timing2);
+
+ return;
+}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 12/31] iMX28: Add I2C bus driver
2011-09-08 20:42 ` [U-Boot] [PATCH 12/31] iMX28: Add I2C bus driver Marek Vasut
@ 2011-09-09 5:45 ` Heiko Schocher
2011-09-09 11:18 ` Marek Vasut
0 siblings, 1 reply; 68+ messages in thread
From: Heiko Schocher @ 2011-09-09 5:45 UTC (permalink / raw)
To: u-boot
Hello Marek,
Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>
> ---
> drivers/i2c/Makefile | 1 +
> drivers/i2c/mxs_i2c.c | 243 +++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 244 insertions(+), 0 deletions(-)
> create mode 100644 drivers/i2c/mxs_i2c.c
only one minor comment ...
[...]
> diff --git a/drivers/i2c/mxs_i2c.c b/drivers/i2c/mxs_i2c.c
> new file mode 100644
> index 0000000..cae50b1
> --- /dev/null
> +++ b/drivers/i2c/mxs_i2c.c
> @@ -0,0 +1,243 @@
[...]
> +int mxs_i2c_wait_for_ack(void)
> +{
> + struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
> + uint32_t tmp;
> + int timeout = MXS_I2C_MAX_TIMEOUT;
> +
> + for (;;) {
> + tmp = readl(&i2c_regs->hw_i2c_ctrl1);
> + if (tmp & I2C_CTRL1_NO_SLAVE_ACK_IRQ) {
> + debug("MXS I2C: No slave ACK\n");
> + goto err;
> + }
> +
> + if (tmp & (
> + I2C_CTRL1_EARLY_TERM_IRQ | I2C_CTRL1_MASTER_LOSS_IRQ |
> + I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ
> + )) {
Checkpatch don;t beats here, but I think, two line are not necessary
here, just do a:
I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ)) {
Beside of that, patch looks good to me, so:
Acked-by: Heiko Schocher<hs@denx.de>
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 12/31] iMX28: Add I2C bus driver
2011-09-09 5:45 ` Heiko Schocher
@ 2011-09-09 11:18 ` Marek Vasut
2011-09-09 11:26 ` Stefan Roese
0 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-09 11:18 UTC (permalink / raw)
To: u-boot
On Friday, September 09, 2011 07:45:13 AM Heiko Schocher wrote:
> Hello Marek,
>
> Marek Vasut wrote:
> > Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> > Cc: Heiko Schocher <hs@denx.de>
> > Cc: Stefano Babic <sbabic@denx.de>
> > Cc: Wolfgang Denk <wd@denx.de>
> > Cc: Detlev Zundel <dzu@denx.de>
> > ---
> >
> > drivers/i2c/Makefile | 1 +
> > drivers/i2c/mxs_i2c.c | 243
> > +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 244
> > insertions(+), 0 deletions(-)
> > create mode 100644 drivers/i2c/mxs_i2c.c
>
> only one minor comment ...
>
> [...]
>
> > diff --git a/drivers/i2c/mxs_i2c.c b/drivers/i2c/mxs_i2c.c
> > new file mode 100644
> > index 0000000..cae50b1
> > --- /dev/null
> > +++ b/drivers/i2c/mxs_i2c.c
> > @@ -0,0 +1,243 @@
>
> [...]
>
> > +int mxs_i2c_wait_for_ack(void)
> > +{
> > + struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
> > + uint32_t tmp;
> > + int timeout = MXS_I2C_MAX_TIMEOUT;
> > +
> > + for (;;) {
> > + tmp = readl(&i2c_regs->hw_i2c_ctrl1);
> > + if (tmp & I2C_CTRL1_NO_SLAVE_ACK_IRQ) {
> > + debug("MXS I2C: No slave ACK\n");
> > + goto err;
> > + }
> > +
> > + if (tmp & (
> > + I2C_CTRL1_EARLY_TERM_IRQ | I2C_CTRL1_MASTER_LOSS_IRQ |
> > + I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ
> > + )) {
>
> Checkpatch don;t beats here, but I think, two line are not necessary
> here, just do a:
>
> I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ)) {
>
> Beside of that, patch looks good to me, so:
I think it's more readable as it is ... what do the others think ?
>
> Acked-by: Heiko Schocher<hs@denx.de>
>
> bye,
> Heiko
^ permalink raw reply [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 12/31] iMX28: Add I2C bus driver
2011-09-09 11:18 ` Marek Vasut
@ 2011-09-09 11:26 ` Stefan Roese
2011-09-09 11:52 ` Marek Vasut
0 siblings, 1 reply; 68+ messages in thread
From: Stefan Roese @ 2011-09-09 11:26 UTC (permalink / raw)
To: u-boot
Hi Marek,
On Friday 09 September 2011 13:18:40 Marek Vasut wrote:
> > > + if (tmp & (
> > > + I2C_CTRL1_EARLY_TERM_IRQ | I2C_CTRL1_MASTER_LOSS_IRQ |
> > > + I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ
> > > + )) {
> >
> > Checkpatch don;t beats here, but I think, two line are not necessary
> >
> > here, just do a:
> > I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ)) {
> >
> > Beside of that, patch looks good to me, so:
> I think it's more readable as it is ... what do the others think ?
I'm definitely with Heiko here! ;)
Ciao,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
^ permalink raw reply [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 12/31] iMX28: Add I2C bus driver
2011-09-09 11:26 ` Stefan Roese
@ 2011-09-09 11:52 ` Marek Vasut
0 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-09 11:52 UTC (permalink / raw)
To: u-boot
On Friday, September 09, 2011 01:26:18 PM Stefan Roese wrote:
> Hi Marek,
>
> On Friday 09 September 2011 13:18:40 Marek Vasut wrote:
> > > > + if (tmp & (
> > > > + I2C_CTRL1_EARLY_TERM_IRQ |
I2C_CTRL1_MASTER_LOSS_IRQ |
> > > > + I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ
> > > > + )) {
> > >
> > > Checkpatch don;t beats here, but I think, two line are not necessary
> > >
> > > here, just do a:
> > > I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ)) {
> > >
> > > Beside of that, patch looks good to me, so:
> > I think it's more readable as it is ... what do the others think ?
>
> I'm definitely with Heiko here! ;)
Oh youuu ... grrrr ;-) V2 on the way :-)
>
> Ciao,
> Stefan
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 13/31] M28: Enable I2C, EEPROM and RTC
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (11 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 12/31] iMX28: Add I2C bus driver Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-09 5:45 ` Heiko Schocher
2011-09-08 20:42 ` [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL Marek Vasut
` (17 subsequent siblings)
30 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
include/configs/m28evk.h | 29 +++++++++++++++++++++++++++++
1 files changed, 29 insertions(+), 0 deletions(-)
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 9e0d705..7e664fc 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -44,9 +44,12 @@
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define CONFIG_CMD_NET
@@ -120,6 +123,32 @@
#endif
/*
+ * I2C
+ */
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_I2C_MXS
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED 400000
+#endif
+
+/*
+ * EEPROM
+ */
+#ifdef CONFIG_CMD_EEPROM
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#endif
+
+/*
+ * RTC
+ */
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_M41T62
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
+#endif
+
+/*
* Boot Linux
*/
#define CONFIG_CMDLINE_TAG
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 13/31] M28: Enable I2C, EEPROM and RTC
2011-09-08 20:42 ` [U-Boot] [PATCH 13/31] M28: Enable I2C, EEPROM and RTC Marek Vasut
@ 2011-09-09 5:45 ` Heiko Schocher
0 siblings, 0 replies; 68+ messages in thread
From: Heiko Schocher @ 2011-09-09 5:45 UTC (permalink / raw)
To: u-boot
Hello Marek,
Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Heiko Schocher <hs@denx.de>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>
> ---
> include/configs/m28evk.h | 29 +++++++++++++++++++++++++++++
> 1 files changed, 29 insertions(+), 0 deletions(-)
Acked-by: Heiko Schocher<hs@denx.de>
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (12 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 13/31] M28: Enable I2C, EEPROM and RTC Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-09 5:44 ` Chander Kashyap
[not found] ` <CANuQgHH_p-_HRf_jBKiPZz=br0+aCyWROWzHDZgV47xWg97aiQ@mail.gmail.com>
2011-09-08 20:42 ` [U-Boot] [PATCH 15/31] M28: Enable " Marek Vasut
` (16 subsequent siblings)
30 siblings, 2 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
mmc_spl/board/denx/m28evk/Makefile | 102 ++++
mmc_spl/board/denx/m28evk/m28_init.h | 36 ++
mmc_spl/board/denx/m28evk/mem_init.c | 218 ++++++++
mmc_spl/board/denx/m28evk/mmc_boot.c | 271 ++++++++++
mmc_spl/board/denx/m28evk/power_init.c | 915 ++++++++++++++++++++++++++++++++
mmc_spl/board/denx/m28evk/start.S | 402 ++++++++++++++
mmc_spl/board/denx/m28evk/u-boot.bd | 14 +
mmc_spl/board/denx/m28evk/u-boot.lds | 87 +++
8 files changed, 2045 insertions(+), 0 deletions(-)
create mode 100644 mmc_spl/board/denx/m28evk/Makefile
create mode 100644 mmc_spl/board/denx/m28evk/m28_init.h
create mode 100644 mmc_spl/board/denx/m28evk/mem_init.c
create mode 100644 mmc_spl/board/denx/m28evk/mmc_boot.c
create mode 100644 mmc_spl/board/denx/m28evk/power_init.c
create mode 100644 mmc_spl/board/denx/m28evk/start.S
create mode 100644 mmc_spl/board/denx/m28evk/u-boot.bd
create mode 100644 mmc_spl/board/denx/m28evk/u-boot.lds
diff --git a/mmc_spl/board/denx/m28evk/Makefile b/mmc_spl/board/denx/m28evk/Makefile
new file mode 100644
index 0000000..c08eac9
--- /dev/null
+++ b/mmc_spl/board/denx/m28evk/Makefile
@@ -0,0 +1,102 @@
+#
+# (C) Copyright 2006-2007
+# Stefan Roese, DENX Software Engineering, sr at denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# (C) Copyright 2011
+# Chander Kashyap, Samsung Electronics, <k.chander@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+CONFIG_MMC_SPL = y
+
+include $(TOPDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/mmc_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(mmcobj)u-boot.lds -Ttext 0x0 $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_MMC_SPL
+AFLAGS += -DCONFIG_SPL_BUILD
+CFLAGS += -DCONFIG_MMC_SPL
+CFLAGS += -DCONFIG_SPL_BUILD
+
+SOBJS = start.o _udivsi3.o _divsi3.o
+COBJS = mmc_boot.o iomux.o power_init.o mem_init.o div0.o
+
+SRCS := $($(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/mmc_spl/board/$(BOARDDIR)
+
+mmcobj := $(OBJTREE)/mmc_spl/
+
+
+ALL = $(mmcobj)u-boot-spl $(mmcobj)u-boot-spl.bin $(mmcobj)u-boot-mmc-spl.bin
+
+all: $(obj).depend $(ALL)
+
+$(mmcobj)u-boot-mmc-spl.bin: $(mmcobj)u-boot-spl.bin
+ cp $< $@
+
+$(mmcobj)u-boot-spl.bin: $(mmcobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(mmcobj)u-boot-spl: $(OBJS) $(mmcobj)u-boot.lds
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
+ -Map $(mmcobj)u-boot-spl.map \
+ -o $(mmcobj)u-boot-spl
+
+$(mmcobj)u-boot.lds: $(LDSCRIPT)
+ $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+
+# create symbolic links for common files
+
+# from cpu directory
+iomux.c:
+ @rm -f $@
+ @ln -s $(TOPDIR)/arch/arm/cpu/arm926ejs/mx28/iomux.c $@
+
+_udivsi3.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/arch/arm/lib/_udivsi3.S $@
+
+_divsi3.S:
+ @rm -f $@
+ @ln -s $(TOPDIR)/arch/arm/lib/_divsi3.S $@
+
+div0.c:
+ @rm -f $@
+ @ln -s $(TOPDIR)/arch/arm/lib/div0.c $@
+
+#########################################################################
+
+$(obj)%.o: %.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: %.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/mmc_spl/board/denx/m28evk/m28_init.h b/mmc_spl/board/denx/m28evk/m28_init.h
new file mode 100644
index 0000000..7f569e0
--- /dev/null
+++ b/mmc_spl/board/denx/m28evk/m28_init.h
@@ -0,0 +1,36 @@
+/*
+ * Freescale i.MX28 SPL functions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __M28_INIT_H__
+#define __M28_INIT_H__
+
+void early_delay(int delay);
+
+void mx28_power_init(void);
+void mx28_power_wait_pswitch(void);
+
+void mx28_mem_init(void);
+
+#endif /* __M28_INIT_H__ */
diff --git a/mmc_spl/board/denx/m28evk/mem_init.c b/mmc_spl/board/denx/m28evk/mem_init.c
new file mode 100644
index 0000000..4cd6fba
--- /dev/null
+++ b/mmc_spl/board/denx/m28evk/mem_init.c
@@ -0,0 +1,218 @@
+/*
+ * Freescale i.MX28 RAM init
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/regs-pinctrl.h>
+#include <asm/arch/regs-rtc.h>
+#include <asm/arch/regs-power.h>
+
+#include "m28_init.h"
+
+uint32_t dram_vals[] = {
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000100, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00010101, 0x01010101, 0x000f0f01, 0x0f02020a,
+ 0x00000000, 0x00010101, 0x00000100, 0x00000100, 0x00000000,
+ 0x00000002, 0x01010000, 0x05060302, 0x06005003, 0x0a0000c8,
+ 0x02009c40, 0x0000030c, 0x0036a609, 0x031a0612, 0x02030202,
+ 0x00c8001c, 0x00000000, 0x00000000, 0x00012100, 0xffff0303,
+ 0x00012100, 0xffff0303, 0x00012100, 0xffff0303, 0x00012100,
+ 0xffff0303, 0x00000003, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000612, 0x01000F02, 0x06120612, 0x00000200,
+ 0x00020007, 0xf5014b27, 0xf5014b27, 0xf5014b27, 0xf5014b27,
+ 0x07000300, 0x07000300, 0x07000300, 0x07000300, 0x00000006,
+ 0x00000000, 0x00000000, 0x01000000, 0x01020408, 0x08040201,
+ 0x000f1133, 0x00000000, 0x00001f04, 0x00001f04, 0x00001f04,
+ 0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00010000, 0x00020304, 0x00000004,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x01010000, 0x01000000, 0x03030000, 0x00010303,
+ 0x01020202, 0x00000000, 0x02040303, 0x21002103, 0x00061200,
+ 0x06120612, 0x04320432, 0x04320432, 0x00040004, 0x00040004,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00010001
+};
+
+void init_m28_200mhz_ddr2(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dram_vals); i++)
+ writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
+}
+
+void mx28_mem_init_clock(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ /* Gate EMI clock */
+ writel(CLKCTRL_FRAC0_CLKGATEEMI,
+ &clkctrl_regs->hw_clkctrl_frac0_set);
+
+ /* EMI = 205MHz */
+ writel(CLKCTRL_FRAC0_EMIFRAC_MASK,
+ &clkctrl_regs->hw_clkctrl_frac0_set);
+ writel((0x2a << CLKCTRL_FRAC0_EMIFRAC_OFFSET) &
+ CLKCTRL_FRAC0_EMIFRAC_MASK,
+ &clkctrl_regs->hw_clkctrl_frac0_clr);
+
+ /* Ungate EMI clock */
+ writel(CLKCTRL_FRAC0_CLKGATEEMI,
+ &clkctrl_regs->hw_clkctrl_frac0_clr);
+
+ early_delay(11000);
+
+ writel((2 << CLKCTRL_EMI_DIV_EMI_OFFSET) |
+ (1 << CLKCTRL_EMI_DIV_XTAL_OFFSET),
+ &clkctrl_regs->hw_clkctrl_emi);
+
+ /* Unbypass EMI */
+ writel(CLKCTRL_CLKSEQ_BYPASS_EMI,
+ &clkctrl_regs->hw_clkctrl_clkseq_clr);
+
+ early_delay(10000);
+}
+
+void mx28_mem_setup_cpu_and_hbus(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ /* CPU = 454MHz and ungate CPU clock */
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0,
+ CLKCTRL_FRAC0_CPUFRAC_MASK | CLKCTRL_FRAC0_CLKGATECPU,
+ 19 << CLKCTRL_FRAC0_CPUFRAC_OFFSET);
+
+ /* Set CPU bypass */
+ writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+ &clkctrl_regs->hw_clkctrl_clkseq_set);
+
+ /* HBUS = 151MHz */
+ writel(CLKCTRL_HBUS_DIV_MASK, &clkctrl_regs->hw_clkctrl_hbus_set);
+ writel(((~3) << CLKCTRL_HBUS_DIV_OFFSET) & CLKCTRL_HBUS_DIV_MASK,
+ &clkctrl_regs->hw_clkctrl_hbus_clr);
+
+ early_delay(10000);
+
+ /* CPU clock divider = 1 */
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_cpu,
+ CLKCTRL_CPU_DIV_CPU_MASK, 1);
+
+ /* Disable CPU bypass */
+ writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+ &clkctrl_regs->hw_clkctrl_clkseq_clr);
+}
+
+void mx28_mem_setup_vdda(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ writel((0xc << POWER_VDDACTRL_TRG_OFFSET) |
+ (0x7 << POWER_VDDACTRL_BO_OFFSET_OFFSET) |
+ POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW,
+ &power_regs->hw_power_vddactrl);
+}
+
+void mx28_mem_setup_vddd(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ writel((0x1c << POWER_VDDDCTRL_TRG_OFFSET) |
+ (0x7 << POWER_VDDDCTRL_BO_OFFSET_OFFSET) |
+ POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW,
+ &power_regs->hw_power_vdddctrl);
+}
+
+void mx28_mem_init(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ struct mx28_pinctrl_regs *pinctrl_regs =
+ (struct mx28_pinctrl_regs *)MXS_PINCTRL_BASE;
+
+ /* Set DDR2 mode */
+ writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2,
+ &pinctrl_regs->hw_pinctrl_emi_ds_ctrl_set);
+
+ /* Power up PLL0 */
+ writel(CLKCTRL_PLL0CTRL0_POWER,
+ &clkctrl_regs->hw_clkctrl_pll0ctrl0_set);
+
+ early_delay(11000);
+
+ mx28_mem_init_clock();
+
+ mx28_mem_setup_vdda();
+
+ /*
+ * Configure the DRAM registers
+ */
+
+ /* Clear START bit from DRAM_CTL16 */
+ clrbits_le32(MXS_DRAM_BASE + 0x40, 1);
+
+ init_m28_200mhz_ddr2();
+
+ /* Clear SREFRESH bit from DRAM_CTL17 */
+ clrbits_le32(MXS_DRAM_BASE + 0x44, 1);
+
+ /* Set START bit in DRAM_CTL16 */
+ setbits_le32(MXS_DRAM_BASE + 0x40, 1);
+
+ /* Wait for bit 20 (DRAM init complete) in DRAM_CTL58 */
+ while (!(readl(MXS_DRAM_BASE + 0xe8) & (1 << 20)))
+ ;
+
+ mx28_mem_setup_vddd();
+
+ early_delay(10000);
+
+ mx28_mem_setup_cpu_and_hbus();
+}
diff --git a/mmc_spl/board/denx/m28evk/mmc_boot.c b/mmc_spl/board/denx/m28evk/mmc_boot.c
new file mode 100644
index 0000000..4e670ea
--- /dev/null
+++ b/mmc_spl/board/denx/m28evk/mmc_boot.c
@@ -0,0 +1,271 @@
+/*
+ * Freescale i.MX28 Boot setup
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/iomux-mx28.h>
+
+#include "m28_init.h"
+
+/*
+ * This delay function is intended to be used only in early stage of boot, where
+ * clock are not set up yet. The timer used here is reset on every boot and
+ * takes a few seconds to roll. The boot doesn't take that long, so to keep the
+ * code simple, it doesn't take rolling into consideration.
+ */
+#define HW_DIGCTRL_MICROSECONDS 0x8001c0c0
+void early_delay(int delay)
+{
+ uint32_t st = readl(HW_DIGCTRL_MICROSECONDS);
+ st += delay;
+ while (st > readl(HW_DIGCTRL_MICROSECONDS))
+ ;
+}
+
+#define MUX_CONFIG_LED (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
+#define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA)
+#define MUX_CONFIG_TSC (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_GPMI (MXS_PAD_1V8 | MXS_PAD_4MA | MXS_PAD_NOPULL)
+#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
+
+const iomux_cfg_t iomux_setup[] = {
+ /* LED */
+ MX28_PAD_ENET0_RXD3__GPIO_4_10 | MUX_CONFIG_LED,
+
+ /* framebuffer */
+ MX28_PAD_LCD_D00__LCD_D0 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D01__LCD_D1 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D02__LCD_D2 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D03__LCD_D3 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D04__LCD_D4 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D05__LCD_D5 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D06__LCD_D6 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D07__LCD_D7 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D08__LCD_D8 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D09__LCD_D9 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D18__LCD_D18 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D19__LCD_D19 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D20__LCD_D20 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D21__LCD_D21 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D22__LCD_D22 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D23__LCD_D23 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_RD_E__LCD_VSYNC | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_RS__LCD_DOTCLK | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_CS__LCD_CS | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_VSYNC__LCD_VSYNC | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_HSYNC__LCD_HSYNC | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_ENABLE__GPIO_1_31 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_RESET__GPIO_3_30 | MUX_CONFIG_LCD,
+ MX28_PAD_PWM0__PWM_0 | MUX_CONFIG_LCD,
+
+ /* UART1 */
+ MX28_PAD_AUART0_CTS__DUART_RX,
+ MX28_PAD_AUART0_RTS__DUART_TX,
+ MX28_PAD_AUART0_TX__DUART_RTS,
+ MX28_PAD_AUART0_RX__DUART_CTS,
+
+ /* UART2 */
+ MX28_PAD_AUART1_RX__AUART1_RX,
+ MX28_PAD_AUART1_TX__AUART1_TX,
+ MX28_PAD_AUART1_RTS__AUART1_RTS,
+ MX28_PAD_AUART1_CTS__AUART1_CTS,
+
+ /* CAN */
+ MX28_PAD_GPMI_RDY2__CAN0_TX,
+ MX28_PAD_GPMI_RDY3__CAN0_RX,
+
+ /* I2C */
+ MX28_PAD_I2C0_SCL__I2C0_SCL,
+ MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+ /* TSC2007 */
+ MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MUX_CONFIG_TSC,
+
+ /* MMC0 */
+ MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+ (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
+ MX28_PAD_SSP0_SCK__SSP0_SCK |
+ (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
+ MX28_PAD_PWM3__GPIO_3_28 | MUX_CONFIG_SSP0, /* Power .. FIXME */
+ MX28_PAD_AUART2_CTS__GPIO_3_10, /* WP ... FIXME */
+
+ /* GPMI NAND */
+ MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RDN__GPMI_RDN |
+ (MXS_PAD_1V8 | MXS_PAD_8MA | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
+
+ /* FEC Ethernet */
+ MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
+
+ MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
+
+ /* I2C */
+ MX28_PAD_I2C0_SCL__I2C0_SCL,
+ MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+ /* EMI */
+ MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
+
+ MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
+
+ /* SPI2 (for flash) */
+ MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
+ MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
+ MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
+ MX28_PAD_SSP2_SS0__SSP2_D3 |
+ (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
+};
+
+void board_init_ll(void)
+{
+ mxs_iomux_setup_multiple_pads(iomux_setup, ARRAY_SIZE(iomux_setup));
+ mx28_power_init();
+ mx28_mem_init();
+ mx28_power_wait_pswitch();
+}
+
+/* Support aparatus */
+inline void board_init_f(unsigned long bootflag)
+{
+ for (;;)
+ ;
+}
+
+inline void board_init_r(gd_t *id, ulong dest_addr)
+{
+ for (;;)
+ ;
+}
+
+inline void lowlevel_init(void) {}
+
+inline void __coloured_LED_init(void) {}
+inline void __red_LED_on(void) {}
+void coloured_LED_init(void)
+ __attribute__((weak, alias("__coloured_LED_init")));
+void red_LED_on(void)
+ __attribute__((weak, alias("__red_LED_on")));
+void hang(void) __attribute__ ((noreturn));
+void hang(void)
+{
+ for (;;)
+ ;
+}
diff --git a/mmc_spl/board/denx/m28evk/power_init.c b/mmc_spl/board/denx/m28evk/power_init.c
new file mode 100644
index 0000000..419b452
--- /dev/null
+++ b/mmc_spl/board/denx/m28evk/power_init.c
@@ -0,0 +1,915 @@
+/*
+ * Freescale i.MX28 Boot PMIC init
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/regs-rtc.h>
+#include <asm/arch/regs-power.h>
+
+#include "m28_init.h"
+
+void mx28_power_clock2xtal(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ /* Set XTAL as CPU reference clock */
+ writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+ &clkctrl_regs->hw_clkctrl_clkseq_set);
+}
+
+void mx28_power_clock2pll(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ writel(CLKCTRL_PLL0CTRL0_POWER,
+ &clkctrl_regs->hw_clkctrl_pll0ctrl0_set);
+ early_delay(100);
+ writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+ &clkctrl_regs->hw_clkctrl_clkseq_clr);
+}
+
+void mx28_power_clear_auto_restart(void)
+{
+ struct mx28_rtc_regs *rtc_regs =
+ (struct mx28_rtc_regs *)MXS_RTC_BASE;
+
+ writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr);
+ while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST)
+ ;
+
+ writel(RTC_CTRL_CLKGATE, &rtc_regs->hw_rtc_ctrl_clr);
+ while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_CLKGATE)
+ ;
+
+ /*
+ * Due to the hardware design bug of mx28 EVK-A
+ * we need to set the AUTO_RESTART bit.
+ */
+ if (readl(&rtc_regs->hw_rtc_persistent0) & RTC_PERSISTENT0_AUTO_RESTART)
+ return;
+
+ while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
+ ;
+
+ setbits_le32(&rtc_regs->hw_rtc_persistent0,
+ RTC_PERSISTENT0_AUTO_RESTART);
+ writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_set);
+ writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_clr);
+ while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
+ ;
+ while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_STALE_REGS_MASK)
+ ;
+}
+
+void mx28_power_set_linreg(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ /* Set linear regulator 25mV below switching converter */
+ clrsetbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_LINREG_OFFSET_MASK,
+ POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
+
+ clrsetbits_le32(&power_regs->hw_power_vddactrl,
+ POWER_VDDACTRL_LINREG_OFFSET_MASK,
+ POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW);
+
+ clrsetbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_LINREG_OFFSET_MASK,
+ POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW);
+}
+
+void mx28_power_setup_5v_detect(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ /* Start 5V detection */
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_VBUSVALID_TRSH_MASK,
+ POWER_5VCTRL_VBUSVALID_TRSH_4V4 |
+ POWER_5VCTRL_PWRUP_VBUS_CMPS);
+}
+
+void mx28_src_power_init(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ /* Improve efficieny and reduce transient ripple */
+ writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST |
+ POWER_LOOPCTRL_EN_DF_HYST, &power_regs->hw_power_loopctrl_set);
+
+ clrsetbits_le32(&power_regs->hw_power_dclimits,
+ POWER_DCLIMITS_POSLIMIT_BUCK_MASK,
+ 0x30 << POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET);
+
+ setbits_le32(&power_regs->hw_power_battmonitor,
+ POWER_BATTMONITOR_EN_BATADJ);
+
+ /* Increase the RCSCALE level for quick DCDC response to dynamic load */
+ clrsetbits_le32(&power_regs->hw_power_loopctrl,
+ POWER_LOOPCTRL_EN_RCSCALE_MASK,
+ POWER_LOOPCTRL_RCSCALE_THRESH |
+ POWER_LOOPCTRL_EN_RCSCALE_8X);
+
+ clrsetbits_le32(&power_regs->hw_power_minpwr,
+ POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS);
+
+ /* 5V to battery handoff ... FIXME */
+ setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+ early_delay(30);
+ clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+}
+
+void mx28_power_init_4p2_params(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ /* Setup 4P2 parameters */
+ clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_CMPTRIP_MASK | POWER_DCDC4P2_TRG_MASK,
+ POWER_DCDC4P2_TRG_4V2 | (31 << POWER_DCDC4P2_CMPTRIP_OFFSET));
+
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_HEADROOM_ADJ_MASK,
+ 0x4 << POWER_5VCTRL_HEADROOM_ADJ_OFFSET);
+
+ clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_DROPOUT_CTRL_MASK,
+ POWER_DCDC4P2_DROPOUT_CTRL_100MV |
+ POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL);
+
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
+ 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+}
+
+void mx28_enable_4p2_dcdc_input(int xfer)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo;
+ uint32_t prev_5v_brnout, prev_5v_droop;
+
+ prev_5v_brnout = readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_PWDN_5VBRNOUT;
+ prev_5v_droop = readl(&power_regs->hw_power_ctrl) &
+ POWER_CTRL_ENIRQ_VDD5V_DROOP;
+
+ clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT);
+ writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
+ &power_regs->hw_power_reset);
+
+ clrbits_le32(&power_regs->hw_power_ctrl, POWER_CTRL_ENIRQ_VDD5V_DROOP);
+
+ if (xfer && (readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_ENABLE_DCDC)) {
+ return;
+ }
+
+ /*
+ * Recording orignal values that will be modified temporarlily
+ * to handle a chip bug. See chip errata for CQ ENGR00115837
+ */
+ tmp = readl(&power_regs->hw_power_5vctrl);
+ vbus_thresh = tmp & POWER_5VCTRL_VBUSVALID_TRSH_MASK;
+ vbus_5vdetect = tmp & POWER_5VCTRL_VBUSVALID_5VDETECT;
+
+ pwd_bo = readl(&power_regs->hw_power_minpwr) & POWER_MINPWR_PWD_BO;
+
+ /*
+ * Disable mechanisms that get erroneously tripped by when setting
+ * the DCDC4P2 EN_DCDC
+ */
+ clrbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_VBUSVALID_5VDETECT |
+ POWER_5VCTRL_VBUSVALID_TRSH_MASK);
+
+ writel(POWER_MINPWR_PWD_BO, &power_regs->hw_power_minpwr_set);
+
+ if (xfer) {
+ setbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_DCDC_XFER);
+ early_delay(20);
+ clrbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_DCDC_XFER);
+
+ setbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_ENABLE_DCDC);
+ } else {
+ setbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_ENABLE_DCDC);
+ }
+
+ early_delay(25);
+
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_VBUSVALID_TRSH_MASK, vbus_thresh);
+
+ if (vbus_5vdetect)
+ writel(vbus_5vdetect, &power_regs->hw_power_5vctrl_set);
+
+ if (!pwd_bo)
+ clrbits_le32(&power_regs->hw_power_minpwr, POWER_MINPWR_PWD_BO);
+
+ while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ)
+ clrbits_le32(&power_regs->hw_power_ctrl,
+ POWER_CTRL_VBUS_VALID_IRQ);
+
+ if (prev_5v_brnout) {
+ writel(POWER_5VCTRL_PWDN_5VBRNOUT,
+ &power_regs->hw_power_5vctrl_set);
+ writel(POWER_RESET_UNLOCK_KEY,
+ &power_regs->hw_power_reset);
+ } else {
+ writel(POWER_5VCTRL_PWDN_5VBRNOUT,
+ &power_regs->hw_power_5vctrl_clr);
+ writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
+ &power_regs->hw_power_reset);
+ }
+
+ while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VDD5V_DROOP_IRQ)
+ clrbits_le32(&power_regs->hw_power_ctrl,
+ POWER_CTRL_VDD5V_DROOP_IRQ);
+
+ if (prev_5v_droop)
+ clrbits_le32(&power_regs->hw_power_ctrl,
+ POWER_CTRL_ENIRQ_VDD5V_DROOP);
+ else
+ setbits_le32(&power_regs->hw_power_ctrl,
+ POWER_CTRL_ENIRQ_VDD5V_DROOP);
+}
+
+void mx28_power_init_4p2_regulator(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t tmp, tmp2;
+
+ setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2);
+
+ writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_set);
+
+ writel(POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
+ &power_regs->hw_power_5vctrl_clr);
+ clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_TRG_MASK);
+
+ /* Power up the 4p2 rail and logic/control */
+ writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+ &power_regs->hw_power_5vctrl_clr);
+
+ /*
+ * Start charging up the 4p2 capacitor. We ramp of this charge
+ * gradually to avoid large inrush current from the 5V cable which can
+ * cause transients/problems
+ */
+ mx28_enable_4p2_dcdc_input(0);
+
+ if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
+ /*
+ * If we arrived here, we were unable to recover from mx23 chip
+ * errata 5837. 4P2 is disabled and sufficient battery power is
+ * not present. Exiting to not enable DCDC power during 5V
+ * connected state.
+ */
+ clrbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_ENABLE_DCDC);
+ writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+ &power_regs->hw_power_5vctrl_set);
+ hang();
+ }
+
+ /*
+ * Here we set the 4p2 brownout level to something very close to 4.2V.
+ * We then check the brownout status. If the brownout status is false,
+ * the voltage is already close to the target voltage of 4.2V so we
+ * can go ahead and set the 4P2 current limit to our max target limit.
+ * If the brownout status is true, we need to ramp us the current limit
+ * so that we don't cause large inrush current issues. We step up the
+ * current limit until the brownout status is false or until we've
+ * reached our maximum defined 4p2 current limit.
+ */
+ clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_BO_MASK,
+ 22 << POWER_DCDC4P2_BO_OFFSET); /* 4.15V */
+
+ if (!(readl(&power_regs->hw_power_sts) & POWER_STS_DCDC_4P2_BO)) {
+ setbits_le32(&power_regs->hw_power_5vctrl,
+ 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+ } else {
+ tmp = (readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK) >>
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
+ while (tmp < 0x3f) {
+ if (!(readl(&power_regs->hw_power_sts) &
+ POWER_STS_DCDC_4P2_BO)) {
+ tmp = readl(&power_regs->hw_power_5vctrl);
+ tmp |= POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
+ early_delay(100);
+ writel(tmp, &power_regs->hw_power_5vctrl);
+ break;
+ } else {
+ tmp++;
+ tmp2 = readl(&power_regs->hw_power_5vctrl);
+ tmp2 &= ~POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
+ tmp2 |= tmp <<
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
+ writel(tmp2, &power_regs->hw_power_5vctrl);
+ early_delay(100);
+ }
+ }
+ }
+
+ clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK);
+ writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+}
+
+void mx28_power_init_dcdc_4p2_source(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ if (!(readl(&power_regs->hw_power_dcdc4p2) &
+ POWER_DCDC4P2_ENABLE_DCDC)) {
+ hang();
+ }
+
+ mx28_enable_4p2_dcdc_input(1);
+
+ if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
+ clrbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_ENABLE_DCDC);
+ writel(POWER_5VCTRL_ENABLE_DCDC,
+ &power_regs->hw_power_5vctrl_clr);
+ writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+ &power_regs->hw_power_5vctrl_set);
+ }
+}
+
+void mx28_power_enable_4p2(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t vdddctrl, vddactrl, vddioctrl;
+ uint32_t tmp;
+
+ vdddctrl = readl(&power_regs->hw_power_vdddctrl);
+ vddactrl = readl(&power_regs->hw_power_vddactrl);
+ vddioctrl = readl(&power_regs->hw_power_vddioctrl);
+
+ setbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
+ POWER_VDDDCTRL_PWDN_BRNOUT);
+
+ setbits_le32(&power_regs->hw_power_vddactrl,
+ POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG |
+ POWER_VDDACTRL_PWDN_BRNOUT);
+
+ setbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_DISABLE_FET | POWER_VDDIOCTRL_PWDN_BRNOUT);
+
+ mx28_power_init_4p2_params();
+ mx28_power_init_4p2_regulator();
+
+ /* Shutdown battery (none present) */
+ clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK);
+ writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+ writel(POWER_CTRL_ENIRQ_DCDC4P2_BO, &power_regs->hw_power_ctrl_clr);
+
+ mx28_power_init_dcdc_4p2_source();
+
+ writel(vdddctrl, &power_regs->hw_power_vdddctrl);
+ early_delay(20);
+ writel(vddactrl, &power_regs->hw_power_vddactrl);
+ early_delay(20);
+ writel(vddioctrl, &power_regs->hw_power_vddioctrl);
+
+ /*
+ * Check if FET is enabled on either powerout and if so,
+ * disable load.
+ */
+ tmp = 0;
+ tmp |= !(readl(&power_regs->hw_power_vdddctrl) &
+ POWER_VDDDCTRL_DISABLE_FET);
+ tmp |= !(readl(&power_regs->hw_power_vddactrl) &
+ POWER_VDDACTRL_DISABLE_FET);
+ tmp |= !(readl(&power_regs->hw_power_vddioctrl) &
+ POWER_VDDIOCTRL_DISABLE_FET);
+ if (tmp)
+ writel(POWER_CHARGE_ENABLE_LOAD,
+ &power_regs->hw_power_charge_clr);
+}
+
+void mx28_boot_valid_5v(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ /*
+ * Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V
+ * disconnect event. FIXME
+ */
+ writel(POWER_5VCTRL_VBUSVALID_5VDETECT,
+ &power_regs->hw_power_5vctrl_set);
+
+ /* Configure polarity to check for 5V disconnection. */
+ writel(POWER_CTRL_POLARITY_VBUSVALID |
+ POWER_CTRL_POLARITY_VDD5V_GT_VDDIO,
+ &power_regs->hw_power_ctrl_clr);
+
+ writel(POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_VDD5V_GT_VDDIO_IRQ,
+ &power_regs->hw_power_ctrl_clr);
+
+ mx28_power_enable_4p2();
+}
+
+void mx28_powerdown(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset);
+ writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
+ &power_regs->hw_power_reset);
+}
+
+void mx28_handle_5v_conflict(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t tmp;
+
+ setbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_BO_OFFSET_MASK);
+
+ for (;;) {
+ tmp = readl(&power_regs->hw_power_sts);
+
+ if (tmp & POWER_STS_VDDIO_BO) {
+ mx28_powerdown();
+ break;
+ }
+
+ if (tmp & POWER_STS_VDD5V_GT_VDDIO) {
+ mx28_boot_valid_5v();
+ break;
+ } else {
+ mx28_powerdown();
+ break;
+ }
+ }
+}
+
+int mx28_get_batt_volt(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t volt = readl(&power_regs->hw_power_battmonitor);
+ volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
+ volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
+ volt *= 8;
+ return volt;
+}
+
+int mx28_is_batt_ready(void)
+{
+ return (mx28_get_batt_volt() >= 3600);
+}
+
+void mx28_5v_boot(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ /*
+ * NOTE: In original IMX-Bootlets, this also checks for VBUSVALID,
+ * but their implementation always returns 1 so we omit it here.
+ */
+ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ mx28_boot_valid_5v();
+ return;
+ }
+
+ early_delay(1000);
+ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ mx28_boot_valid_5v();
+ return;
+ }
+
+ mx28_handle_5v_conflict();
+}
+
+void mx28_init_batt_bo(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ /* Brownout at 3V */
+ clrsetbits_le32(&power_regs->hw_power_battmonitor,
+ POWER_BATTMONITOR_BRWNOUT_LVL_MASK,
+ 15 << POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET);
+
+ writel(POWER_CTRL_BATT_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+ writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr);
+}
+
+void mx28_switch_vddd_to_dcdc_source(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ clrsetbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_LINREG_OFFSET_MASK,
+ POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
+
+ clrbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
+ POWER_VDDDCTRL_DISABLE_STEPPING);
+}
+
+int mx28_is_batt_good(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t volt;
+
+ volt = readl(&power_regs->hw_power_battmonitor);
+ volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
+ volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
+ volt *= 8;
+
+ if ((volt >= 2400) && (volt <= 4300))
+ return 1;
+
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
+ 0x3 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+ writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+ &power_regs->hw_power_5vctrl_clr);
+
+ clrsetbits_le32(&power_regs->hw_power_charge,
+ POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
+ POWER_CHARGE_STOP_ILIMIT_10MA | 0x3);
+
+ writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_clr);
+ writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+ &power_regs->hw_power_5vctrl_clr);
+
+ early_delay(500000);
+
+ volt = readl(&power_regs->hw_power_battmonitor);
+ volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
+ volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
+ volt *= 8;
+
+ if (volt >= 3500)
+ return 0;
+
+ if (volt >= 2400)
+ return 1;
+
+ writel(POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
+ &power_regs->hw_power_charge_clr);
+ writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set);
+
+ return 0;
+}
+
+void mx28_power_configure_power_source(void)
+{
+ mx28_src_power_init();
+
+ mx28_5v_boot();
+ mx28_power_clock2pll();
+
+ mx28_init_batt_bo();
+ mx28_switch_vddd_to_dcdc_source();
+}
+
+void mx28_enable_output_rail_protection(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
+ POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+
+ setbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_PWDN_BRNOUT);
+
+ setbits_le32(&power_regs->hw_power_vddactrl,
+ POWER_VDDACTRL_PWDN_BRNOUT);
+
+ setbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_PWDN_BRNOUT);
+}
+
+int mx28_get_vddio_power_source_off(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t tmp;
+
+ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ tmp = readl(&power_regs->hw_power_vddioctrl);
+ if (tmp & POWER_VDDIOCTRL_DISABLE_FET) {
+ if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
+ POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
+ return 1;
+ }
+ }
+
+ if (!(readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_ENABLE_DCDC)) {
+ if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
+ POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
+ return 1;
+ }
+ }
+ }
+
+ return 0;
+
+}
+
+int mx28_get_vddd_power_source_off(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t tmp;
+
+ tmp = readl(&power_regs->hw_power_vdddctrl);
+ if (tmp & POWER_VDDDCTRL_DISABLE_FET) {
+ if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
+ POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
+ return 1;
+ }
+ }
+
+ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ if (!(readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_ENABLE_DCDC)) {
+ return 1;
+ }
+ }
+
+ if (!(tmp & POWER_VDDDCTRL_ENABLE_LINREG)) {
+ if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
+ POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW) {
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+void mx28_power_set_vddio(uint32_t new_target, uint32_t new_brownout)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t cur_target, diff, bo_int = 0;
+ uint32_t powered_by_linreg = 0;
+
+ new_brownout = new_target - new_brownout;
+
+ cur_target = readl(&power_regs->hw_power_vddioctrl);
+ cur_target &= POWER_VDDIOCTRL_TRG_MASK;
+ cur_target *= 50; /* 50 mV step*/
+ cur_target += 2800; /* 2800 mV lowest */
+
+ powered_by_linreg = mx28_get_vddio_power_source_off();
+ if (new_target > cur_target) {
+
+ if (powered_by_linreg) {
+ bo_int = readl(&power_regs->hw_power_vddioctrl);
+ clrbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_CTRL_ENIRQ_VDDIO_BO);
+ }
+
+ setbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_BO_OFFSET_MASK);
+ do {
+ if (new_target - cur_target > 100)
+ diff = cur_target + 100;
+ else
+ diff = new_target;
+
+ diff -= 2800;
+ diff /= 50;
+
+ clrsetbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_TRG_MASK, diff);
+
+ if (powered_by_linreg)
+ early_delay(1500);
+ else {
+ while (!(readl(&power_regs->hw_power_sts) &
+ POWER_STS_DC_OK))
+ ;
+
+ }
+
+ cur_target = readl(&power_regs->hw_power_vddioctrl);
+ cur_target &= POWER_VDDIOCTRL_TRG_MASK;
+ cur_target *= 50; /* 50 mV step*/
+ cur_target += 2800; /* 2800 mV lowest */
+ } while (new_target > cur_target);
+
+ if (powered_by_linreg) {
+ writel(POWER_CTRL_VDDIO_BO_IRQ,
+ &power_regs->hw_power_ctrl_clr);
+ if (bo_int & POWER_CTRL_ENIRQ_VDDIO_BO)
+ setbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_CTRL_ENIRQ_VDDIO_BO);
+ }
+ } else {
+ do {
+ if (cur_target - new_target > 100)
+ diff = cur_target - 100;
+ else
+ diff = new_target;
+
+ diff -= 2800;
+ diff /= 50;
+
+ clrsetbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_TRG_MASK, diff);
+
+ if (powered_by_linreg)
+ early_delay(1500);
+ else {
+ while (!(readl(&power_regs->hw_power_sts) &
+ POWER_STS_DC_OK))
+ ;
+
+ }
+
+ cur_target = readl(&power_regs->hw_power_vddioctrl);
+ cur_target &= POWER_VDDIOCTRL_TRG_MASK;
+ cur_target *= 50; /* 50 mV step*/
+ cur_target += 2800; /* 2800 mV lowest */
+ } while (new_target < cur_target);
+ }
+
+ clrsetbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDDCTRL_BO_OFFSET_MASK,
+ new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET);
+}
+
+void mx28_power_set_vddd(uint32_t new_target, uint32_t new_brownout)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t cur_target, diff, bo_int = 0;
+ uint32_t powered_by_linreg = 0;
+
+ new_brownout = new_target - new_brownout;
+
+ cur_target = readl(&power_regs->hw_power_vdddctrl);
+ cur_target &= POWER_VDDDCTRL_TRG_MASK;
+ cur_target *= 25; /* 25 mV step*/
+ cur_target += 800; /* 800 mV lowest */
+
+ powered_by_linreg = mx28_get_vddd_power_source_off();
+ if (new_target > cur_target) {
+ if (powered_by_linreg) {
+ bo_int = readl(&power_regs->hw_power_vdddctrl);
+ clrbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_CTRL_ENIRQ_VDDD_BO);
+ }
+
+ setbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_BO_OFFSET_MASK);
+
+ do {
+ if (new_target - cur_target > 100)
+ diff = cur_target + 100;
+ else
+ diff = new_target;
+
+ diff -= 800;
+ diff /= 25;
+
+ clrsetbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_TRG_MASK, diff);
+
+ if (powered_by_linreg)
+ early_delay(1500);
+ else {
+ while (!(readl(&power_regs->hw_power_sts) &
+ POWER_STS_DC_OK))
+ ;
+
+ }
+
+ cur_target = readl(&power_regs->hw_power_vdddctrl);
+ cur_target &= POWER_VDDDCTRL_TRG_MASK;
+ cur_target *= 25; /* 25 mV step*/
+ cur_target += 800; /* 800 mV lowest */
+ } while (new_target > cur_target);
+
+ if (powered_by_linreg) {
+ writel(POWER_CTRL_VDDD_BO_IRQ,
+ &power_regs->hw_power_ctrl_clr);
+ if (bo_int & POWER_CTRL_ENIRQ_VDDD_BO)
+ setbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_CTRL_ENIRQ_VDDD_BO);
+ }
+ } else {
+ do {
+ if (cur_target - new_target > 100)
+ diff = cur_target - 100;
+ else
+ diff = new_target;
+
+ diff -= 800;
+ diff /= 25;
+
+ clrsetbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_TRG_MASK, diff);
+
+ if (powered_by_linreg)
+ early_delay(1500);
+ else {
+ while (!(readl(&power_regs->hw_power_sts) &
+ POWER_STS_DC_OK))
+ ;
+
+ }
+
+ cur_target = readl(&power_regs->hw_power_vdddctrl);
+ cur_target &= POWER_VDDDCTRL_TRG_MASK;
+ cur_target *= 25; /* 25 mV step*/
+ cur_target += 800; /* 800 mV lowest */
+ } while (new_target < cur_target);
+ }
+
+ clrsetbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_BO_OFFSET_MASK,
+ new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET);
+}
+
+void mx28_power_init(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ mx28_power_clock2xtal();
+ mx28_power_clear_auto_restart();
+ mx28_power_set_linreg();
+ mx28_power_setup_5v_detect();
+ mx28_power_configure_power_source();
+ mx28_enable_output_rail_protection();
+
+ mx28_power_set_vddio(3300, 3150);
+
+ mx28_power_set_vddd(1350, 1200);
+
+ writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
+ POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |
+ POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ |
+ POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+
+ writel(POWER_5VCTRL_PWDN_5VBRNOUT, &power_regs->hw_power_5vctrl_set);
+
+ early_delay(1000);
+}
+
+void mx28_power_wait_pswitch(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK))
+ ;
+}
diff --git a/mmc_spl/board/denx/m28evk/start.S b/mmc_spl/board/denx/m28evk/start.S
new file mode 100644
index 0000000..48c2be6
--- /dev/null
+++ b/mmc_spl/board/denx/m28evk/start.S
@@ -0,0 +1,402 @@
+/*
+ * armboot - Startup Code for ARM926EJS CPU-core
+ *
+ * Copyright (c) 2003 Texas Instruments
+ *
+ * ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
+ *
+ * Copyright (c) 2001 Marius Groger <mag@sysgo.de>
+ * Copyright (c) 2002 Alex Zupke <azu@sysgo.de>
+ * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
+ * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
+ * Copyright (c) 2003 Kshitij <kshitij@ti.com>
+ * Copyright (c) 2010 Albert Aribaud <albert.u.boot@aribaud.net>
+ *
+ * Change to support call back into iMX28 bootrom
+ * Copyright (c) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <common.h>
+#include <version.h>
+
+#if defined(CONFIG_OMAP1610)
+#include <./configs/omap1510.h>
+#elif defined(CONFIG_OMAP730)
+#include <./configs/omap730.h>
+#endif
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+
+.globl _start
+_start:
+ b reset
+#ifdef CONFIG_SPL_BUILD
+/* No exception handlers in preloader */
+ ldr pc, _hang
+ ldr pc, _hang
+ ldr pc, _hang
+ ldr pc, _hang
+ b reset
+ ldr pc, _hang
+ ldr pc, _hang
+
+_hang:
+ .word do_hang
+/* pad to 64 byte boundary */
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+#else
+ ldr pc, _undefined_instruction
+ ldr pc, _software_interrupt
+ ldr pc, _prefetch_abort
+ ldr pc, _data_abort
+ ldr pc, _not_used
+ ldr pc, _irq
+ ldr pc, _fiq
+
+_undefined_instruction:
+ .word undefined_instruction
+_software_interrupt:
+ .word software_interrupt
+_prefetch_abort:
+ .word prefetch_abort
+_data_abort:
+ .word data_abort
+_not_used:
+ .word not_used
+_irq:
+ .word irq
+_fiq:
+ .word fiq
+
+#endif /* CONFIG_SPL_BUILD */
+ .balignl 16,0xdeadbeef
+
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+.globl _TEXT_BASE
+_TEXT_BASE:
+ .word CONFIG_SYS_TEXT_BASE
+
+/*
+ * These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
+ */
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .word __bss_start - _start
+
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .word __bss_end__ - _start
+
+.globl _end_ofs
+_end_ofs:
+ .word _end - _start
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+ .word 0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+ .word 0x0badc0de
+#endif
+
+/* IRQ stack memory (calculated at run-time) + 8 bytes */
+.globl IRQ_STACK_START_IN
+IRQ_STACK_START_IN:
+ .word 0x0badc0de
+
+/*
+ * the actual reset code
+ */
+
+reset:
+ /*
+ * Store all registers on old stack pointer, this will allow us later to
+ * return to the BootROM and let the BootROM load U-Boot into RAM.
+ */
+ push {r0-r12,r14}
+
+ /*
+ * set the cpu to SVC32 mode
+ */
+ mrs r0,cpsr
+ bic r0,r0,#0x1f
+ orr r0,r0,#0xd3
+ msr cpsr,r0
+
+ /*
+ * we do sys-critical inits only at reboot,
+ * not when booting from ram!
+ */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ bl cpu_init_crit
+#endif
+
+ bl board_init_ll
+
+ pop {r0-r12,r14}
+ bx lr
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+cpu_init_crit:
+ /*
+ * flush v4 I/D caches
+ */
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
+ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
+
+ /*
+ * disable MMU stuff and caches
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */
+ bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */
+ orr r0, r0, #0x00000002 /* set bit 2 (A) Align */
+ orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */
+ mcr p15, 0, r0, c1, c0, 0
+
+ /*
+ * Go setup Memory and board specific bits prior to relocation.
+ */
+ mov ip, lr /* perserve link reg across call */
+ bl lowlevel_init /* go setup pll,mux,memory */
+ mov lr, ip /* restore link */
+ mov pc, lr /* back to my caller */
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE 72
+
+#define S_OLD_R0 68
+#define S_PSR 64
+#define S_PC 60
+#define S_LR 56
+#define S_SP 52
+
+#define S_IP 48
+#define S_FP 44
+#define S_R10 40
+#define S_R9 36
+#define S_R8 32
+#define S_R7 28
+#define S_R6 24
+#define S_R5 20
+#define S_R4 16
+#define S_R3 12
+#define S_R2 8
+#define S_R1 4
+#define S_R0 0
+
+#define MODE_SVC 0x13
+#define I_BIT 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+ .macro bad_save_user_regs
+ @ carve out a frame on current user stack
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
+ ldr r2, IRQ_STACK_START_IN
+ @ get values for "aborted" pc and cpsr (into parm regs)
+ ldmia r2, {r2 - r3}
+ add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
+ add r5, sp, #S_SP
+ mov r1, lr
+ stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
+ mov r0, sp @ save current stack into r0 (param register)
+ .endm
+
+ .macro irq_save_user_regs
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Calling r0-r12
+ @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
+ add r8, sp, #S_PC
+ stmdb r8, {sp, lr}^ @ Calling SP, LR
+ str lr, [r8, #0] @ Save calling PC
+ mrs r6, spsr
+ str r6, [r8, #4] @ Save CPSR
+ str r0, [r8, #8] @ Save OLD_R0
+ mov r0, sp
+ .endm
+
+ .macro irq_restore_user_regs
+ ldmia sp, {r0 - lr}^ @ Calling r0 - lr
+ mov r0, r0
+ ldr lr, [sp, #S_PC] @ Get PC
+ add sp, sp, #S_FRAME_SIZE
+ subs pc, lr, #4 @ return & move spsr_svc into cpsr
+ .endm
+
+ .macro get_bad_stack
+ ldr r13, IRQ_STACK_START_IN @ setup our mode stack
+
+ str lr, [r13] @ save caller lr in position 0 of saved stack
+ mrs lr, spsr @ get the spsr
+ str lr, [r13, #4] @ save spsr in position 1 of saved stack
+ mov r13, #MODE_SVC @ prepare SVC-Mode
+ @ msr spsr_c, r13
+ msr spsr, r13 @ switch modes, make sure moves will execute
+ mov lr, pc @ capture return pc
+ movs pc, lr @ jump to next instruction & switch modes.
+ .endm
+
+ .macro get_irq_stack @ setup IRQ stack
+ ldr sp, IRQ_STACK_START
+ .endm
+
+ .macro get_fiq_stack @ setup FIQ stack
+ ldr sp, FIQ_STACK_START
+ .endm
+#endif /* CONFIG_SPL_BUILD */
+
+/*
+ * exception handlers
+ */
+#ifdef CONFIG_SPL_BUILD
+ .align 5
+do_hang:
+ ldr sp, _TEXT_BASE /* switch to abort stack */
+1:
+ bl 1b /* hang and never return */
+#else /* !CONFIG_SPL_BUILD */
+ .align 5
+undefined_instruction:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_undefined_instruction
+
+ .align 5
+software_interrupt:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_software_interrupt
+
+ .align 5
+prefetch_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_prefetch_abort
+
+ .align 5
+data_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_data_abort
+
+ .align 5
+not_used:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+ .align 5
+irq:
+ get_irq_stack
+ irq_save_user_regs
+ bl do_irq
+ irq_restore_user_regs
+
+ .align 5
+fiq:
+ get_fiq_stack
+ /* someone ought to write a more effiction fiq_save_user_regs */
+ irq_save_user_regs
+ bl do_fiq
+ irq_restore_user_regs
+
+#else
+
+ .align 5
+irq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_irq
+
+ .align 5
+fiq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_fiq
+
+#endif
+#endif /* CONFIG_SPL_BUILD */
diff --git a/mmc_spl/board/denx/m28evk/u-boot.bd b/mmc_spl/board/denx/m28evk/u-boot.bd
new file mode 100644
index 0000000..3ddffbc
--- /dev/null
+++ b/mmc_spl/board/denx/m28evk/u-boot.bd
@@ -0,0 +1,14 @@
+sources {
+ u_boot_spl="mmc_spl/u-boot-spl.bin";
+ u_boot="u-boot.bin";
+}
+
+section (0) {
+ load u_boot_spl > 0x0000;
+ load ivt (entry = 0x0014) > 0x8000;
+ hab call 0x8000;
+
+ load u_boot > 0x40000100;
+ load ivt (entry = 0x40000100) > 0x8000;
+ hab call 0x8000;
+}
diff --git a/mmc_spl/board/denx/m28evk/u-boot.lds b/mmc_spl/board/denx/m28evk/u-boot.lds
new file mode 100644
index 0000000..f491bb5
--- /dev/null
+++ b/mmc_spl/board/denx/m28evk/u-boot.lds
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data)
+ }
+
+ . = ALIGN(4);
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ _end = .;
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ }
+
+ /DISCARD/ : { *(.bss*) }
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynsym*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.hash*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL
2011-09-08 20:42 ` [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL Marek Vasut
@ 2011-09-09 5:44 ` Chander Kashyap
2011-09-09 7:33 ` Wolfgang Denk
[not found] ` <CANuQgHH_p-_HRf_jBKiPZz=br0+aCyWROWzHDZgV47xWg97aiQ@mail.gmail.com>
1 sibling, 1 reply; 68+ messages in thread
From: Chander Kashyap @ 2011-09-09 5:44 UTC (permalink / raw)
To: u-boot
Dear Marek Vasut,
Please use newly added spl framework to add mmc spl support.
On 9 September 2011 02:12, Marek Vasut <marek.vasut@gmail.com> wrote:
>
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Andy Fleming <afleming@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>
> ---
> ?mmc_spl/board/denx/m28evk/Makefile ? ? | ?102 ++++
> ?mmc_spl/board/denx/m28evk/m28_init.h ? | ? 36 ++
> ?mmc_spl/board/denx/m28evk/mem_init.c ? | ?218 ++++++++
> ?mmc_spl/board/denx/m28evk/mmc_boot.c ? | ?271 ++++++++++
> ?mmc_spl/board/denx/m28evk/power_init.c | ?915 ++++++++++++++++++++++++++++++++
> ?mmc_spl/board/denx/m28evk/start.S ? ? ?| ?402 ++++++++++++++
> ?mmc_spl/board/denx/m28evk/u-boot.bd ? ?| ? 14 +
> ?mmc_spl/board/denx/m28evk/u-boot.lds ? | ? 87 +++
> ?8 files changed, 2045 insertions(+), 0 deletions(-)
> ?create mode 100644 mmc_spl/board/denx/m28evk/Makefile
> ?create mode 100644 mmc_spl/board/denx/m28evk/m28_init.h
> ?create mode 100644 mmc_spl/board/denx/m28evk/mem_init.c
> ?create mode 100644 mmc_spl/board/denx/m28evk/mmc_boot.c
> ?create mode 100644 mmc_spl/board/denx/m28evk/power_init.c
> ?create mode 100644 mmc_spl/board/denx/m28evk/start.S
> ?create mode 100644 mmc_spl/board/denx/m28evk/u-boot.bd
> ?create mode 100644 mmc_spl/board/denx/m28evk/u-boot.lds
>
> diff --git a/mmc_spl/board/denx/m28evk/Makefile b/mmc_spl/board/denx/m28evk/Makefile
> new file mode 100644
> index 0000000..c08eac9
> --- /dev/null
> +++ b/mmc_spl/board/denx/m28evk/Makefile
> @@ -0,0 +1,102 @@
> +#
> +# (C) Copyright 2006-2007
> +# Stefan Roese, DENX Software Engineering, sr at denx.de.
> +#
> +# (C) Copyright 2008
> +# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
> +#
> +# (C) Copyright 2011
> +# Chander Kashyap, Samsung Electronics, <k.chander@samsung.com>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +CONFIG_MMC_SPL = y
> +
> +include $(TOPDIR)/config.mk
> +
> +LDSCRIPT= $(TOPDIR)/mmc_spl/board/$(BOARDDIR)/u-boot.lds
> +LDFLAGS ? ? ? ?= -Bstatic -T $(mmcobj)u-boot.lds -Ttext 0x0 $(PLATFORM_LDFLAGS)
> +AFLAGS += -DCONFIG_MMC_SPL
> +AFLAGS += -DCONFIG_SPL_BUILD
> +CFLAGS += -DCONFIG_MMC_SPL
> +CFLAGS += -DCONFIG_SPL_BUILD
> +
> +SOBJS ?= start.o _udivsi3.o _divsi3.o
> +COBJS ?= mmc_boot.o iomux.o power_init.o mem_init.o div0.o
> +
> +SRCS ? := $($(SOBJS:.o=.S) $(COBJS:.o=.c))
> +OBJS ? := $(addprefix $(obj),$(SOBJS) $(COBJS))
> +__OBJS := $(SOBJS) $(COBJS)
> +LNDIR ?:= $(OBJTREE)/mmc_spl/board/$(BOARDDIR)
> +
> +mmcobj := $(OBJTREE)/mmc_spl/
> +
> +
> +ALL = $(mmcobj)u-boot-spl $(mmcobj)u-boot-spl.bin ?$(mmcobj)u-boot-mmc-spl.bin
> +
> +all: ? ?$(obj).depend $(ALL)
> +
> +$(mmcobj)u-boot-mmc-spl.bin: ? $(mmcobj)u-boot-spl.bin
> + ? ? ? cp $< $@
> +
> +$(mmcobj)u-boot-spl.bin: ? ? ? $(mmcobj)u-boot-spl
> + ? ? ? $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
> +
> +$(mmcobj)u-boot-spl: ? $(OBJS) $(mmcobj)u-boot.lds
> + ? ? ? cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \
> + ? ? ? ? ? ? ? -Map $(mmcobj)u-boot-spl.map \
> + ? ? ? ? ? ? ? -o $(mmcobj)u-boot-spl
> +
> +$(mmcobj)u-boot.lds: $(LDSCRIPT)
> + ? ? ? $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
> +
> +# create symbolic links for common files
> +
> +# from cpu directory
> +iomux.c:
> + ? ? ? @rm -f $@
> + ? ? ? @ln -s $(TOPDIR)/arch/arm/cpu/arm926ejs/mx28/iomux.c $@
> +
> +_udivsi3.S:
> + ? ? ? @rm -f $@
> + ? ? ? @ln -s $(TOPDIR)/arch/arm/lib/_udivsi3.S $@
> +
> +_divsi3.S:
> + ? ? ? @rm -f $@
> + ? ? ? @ln -s $(TOPDIR)/arch/arm/lib/_divsi3.S $@
> +
> +div0.c:
> + ? ? ? @rm -f $@
> + ? ? ? @ln -s $(TOPDIR)/arch/arm/lib/div0.c $@
> +
> +#########################################################################
> +
> +$(obj)%.o: ? ? %.S
> + ? ? ? $(CC) $(AFLAGS) -c -o $@ $<
> +
> +$(obj)%.o: ? ? %.c
> + ? ? ? $(CC) $(CFLAGS) -c -o $@ $<
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/mmc_spl/board/denx/m28evk/m28_init.h b/mmc_spl/board/denx/m28evk/m28_init.h
> new file mode 100644
> index 0000000..7f569e0
> --- /dev/null
> +++ b/mmc_spl/board/denx/m28evk/m28_init.h
> @@ -0,0 +1,36 @@
> +/*
> + * Freescale i.MX28 SPL functions
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef ? ? ? ?__M28_INIT_H__
> +#define ? ? ? ?__M28_INIT_H__
> +
> +void early_delay(int delay);
> +
> +void mx28_power_init(void);
> +void mx28_power_wait_pswitch(void);
> +
> +void mx28_mem_init(void);
> +
> +#endif /* __M28_INIT_H__ */
> diff --git a/mmc_spl/board/denx/m28evk/mem_init.c b/mmc_spl/board/denx/m28evk/mem_init.c
> new file mode 100644
> index 0000000..4cd6fba
> --- /dev/null
> +++ b/mmc_spl/board/denx/m28evk/mem_init.c
> @@ -0,0 +1,218 @@
> +/*
> + * Freescale i.MX28 RAM init
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <config.h>
> +#include <asm/io.h>
> +#include <asm/arch/iomux-mx28.h>
> +#include <asm/arch/regs-common.h>
> +#include <asm/arch/regs-base.h>
> +#include <asm/arch/regs-clkctrl.h>
> +#include <asm/arch/regs-pinctrl.h>
> +#include <asm/arch/regs-rtc.h>
> +#include <asm/arch/regs-power.h>
> +
> +#include "m28_init.h"
> +
> +uint32_t dram_vals[] = {
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000100, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00010101, 0x01010101, 0x000f0f01, 0x0f02020a,
> + ? ? ? 0x00000000, 0x00010101, 0x00000100, 0x00000100, 0x00000000,
> + ? ? ? 0x00000002, 0x01010000, 0x05060302, 0x06005003, 0x0a0000c8,
> + ? ? ? 0x02009c40, 0x0000030c, 0x0036a609, 0x031a0612, 0x02030202,
> + ? ? ? 0x00c8001c, 0x00000000, 0x00000000, 0x00012100, 0xffff0303,
> + ? ? ? 0x00012100, 0xffff0303, 0x00012100, 0xffff0303, 0x00012100,
> + ? ? ? 0xffff0303, 0x00000003, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000612, 0x01000F02, 0x06120612, 0x00000200,
> + ? ? ? 0x00020007, 0xf5014b27, 0xf5014b27, 0xf5014b27, 0xf5014b27,
> + ? ? ? 0x07000300, 0x07000300, 0x07000300, 0x07000300, 0x00000006,
> + ? ? ? 0x00000000, 0x00000000, 0x01000000, 0x01020408, 0x08040201,
> + ? ? ? 0x000f1133, 0x00000000, 0x00001f04, 0x00001f04, 0x00001f04,
> + ? ? ? 0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x00000000, 0x00010000, 0x00020304, 0x00000004,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
> + ? ? ? 0x00000000, 0x01010000, 0x01000000, 0x03030000, 0x00010303,
> + ? ? ? 0x01020202, 0x00000000, 0x02040303, 0x21002103, 0x00061200,
> + ? ? ? 0x06120612, 0x04320432, 0x04320432, 0x00040004, 0x00040004,
> + ? ? ? 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00010001
> +};
> +
> +void init_m28_200mhz_ddr2(void)
> +{
> + ? ? ? int i;
> +
> + ? ? ? for (i = 0; i < ARRAY_SIZE(dram_vals); i++)
> + ? ? ? ? ? ? ? writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
> +}
> +
> +void mx28_mem_init_clock(void)
> +{
> + ? ? ? struct mx28_clkctrl_regs *clkctrl_regs =
> + ? ? ? ? ? ? ? (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
> +
> + ? ? ? /* Gate EMI clock */
> + ? ? ? writel(CLKCTRL_FRAC0_CLKGATEEMI,
> + ? ? ? ? ? ? ? &clkctrl_regs->hw_clkctrl_frac0_set);
> +
> + ? ? ? /* EMI = 205MHz */
> + ? ? ? writel(CLKCTRL_FRAC0_EMIFRAC_MASK,
> + ? ? ? ? ? ? ? &clkctrl_regs->hw_clkctrl_frac0_set);
> + ? ? ? writel((0x2a << CLKCTRL_FRAC0_EMIFRAC_OFFSET) &
> + ? ? ? ? ? ? ? CLKCTRL_FRAC0_EMIFRAC_MASK,
> + ? ? ? ? ? ? ? &clkctrl_regs->hw_clkctrl_frac0_clr);
> +
> + ? ? ? /* Ungate EMI clock */
> + ? ? ? writel(CLKCTRL_FRAC0_CLKGATEEMI,
> + ? ? ? ? ? ? ? &clkctrl_regs->hw_clkctrl_frac0_clr);
> +
> + ? ? ? early_delay(11000);
> +
> + ? ? ? writel((2 << CLKCTRL_EMI_DIV_EMI_OFFSET) |
> + ? ? ? ? ? ? ? (1 << CLKCTRL_EMI_DIV_XTAL_OFFSET),
> + ? ? ? ? ? ? ? &clkctrl_regs->hw_clkctrl_emi);
> +
> + ? ? ? /* Unbypass EMI */
> + ? ? ? writel(CLKCTRL_CLKSEQ_BYPASS_EMI,
> + ? ? ? ? ? ? ? &clkctrl_regs->hw_clkctrl_clkseq_clr);
> +
> + ? ? ? early_delay(10000);
> +}
> +
> +void mx28_mem_setup_cpu_and_hbus(void)
> +{
> + ? ? ? struct mx28_clkctrl_regs *clkctrl_regs =
> + ? ? ? ? ? ? ? (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
> +
> + ? ? ? /* CPU = 454MHz and ungate CPU clock */
> + ? ? ? clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0,
> + ? ? ? ? ? ? ? CLKCTRL_FRAC0_CPUFRAC_MASK | CLKCTRL_FRAC0_CLKGATECPU,
> + ? ? ? ? ? ? ? 19 << CLKCTRL_FRAC0_CPUFRAC_OFFSET);
> +
> + ? ? ? /* Set CPU bypass */
> + ? ? ? writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
> + ? ? ? ? ? ? ? &clkctrl_regs->hw_clkctrl_clkseq_set);
> +
> + ? ? ? /* HBUS = 151MHz */
> + ? ? ? writel(CLKCTRL_HBUS_DIV_MASK, &clkctrl_regs->hw_clkctrl_hbus_set);
> + ? ? ? writel(((~3) << CLKCTRL_HBUS_DIV_OFFSET) & CLKCTRL_HBUS_DIV_MASK,
> + ? ? ? ? ? ? ? &clkctrl_regs->hw_clkctrl_hbus_clr);
> +
> + ? ? ? early_delay(10000);
> +
> + ? ? ? /* CPU clock divider = 1 */
> + ? ? ? clrsetbits_le32(&clkctrl_regs->hw_clkctrl_cpu,
> + ? ? ? ? ? ? ? ? ? ? ? CLKCTRL_CPU_DIV_CPU_MASK, 1);
> +
> + ? ? ? /* Disable CPU bypass */
> + ? ? ? writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
> + ? ? ? ? ? ? ? &clkctrl_regs->hw_clkctrl_clkseq_clr);
> +}
> +
> +void mx28_mem_setup_vdda(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + ? ? ? writel((0xc << POWER_VDDACTRL_TRG_OFFSET) |
> + ? ? ? ? ? ? ? (0x7 << POWER_VDDACTRL_BO_OFFSET_OFFSET) |
> + ? ? ? ? ? ? ? POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW,
> + ? ? ? ? ? ? ? &power_regs->hw_power_vddactrl);
> +}
> +
> +void mx28_mem_setup_vddd(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + ? ? ? writel((0x1c << POWER_VDDDCTRL_TRG_OFFSET) |
> + ? ? ? ? ? ? ? (0x7 << POWER_VDDDCTRL_BO_OFFSET_OFFSET) |
> + ? ? ? ? ? ? ? POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW,
> + ? ? ? ? ? ? ? &power_regs->hw_power_vdddctrl);
> +}
> +
> +void mx28_mem_init(void)
> +{
> + ? ? ? struct mx28_clkctrl_regs *clkctrl_regs =
> + ? ? ? ? ? ? ? (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
> + ? ? ? struct mx28_pinctrl_regs *pinctrl_regs =
> + ? ? ? ? ? ? ? (struct mx28_pinctrl_regs *)MXS_PINCTRL_BASE;
> +
> + ? ? ? /* Set DDR2 mode */
> + ? ? ? writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2,
> + ? ? ? ? ? ? ? &pinctrl_regs->hw_pinctrl_emi_ds_ctrl_set);
> +
> + ? ? ? /* Power up PLL0 */
> + ? ? ? writel(CLKCTRL_PLL0CTRL0_POWER,
> + ? ? ? ? ? ? ? &clkctrl_regs->hw_clkctrl_pll0ctrl0_set);
> +
> + ? ? ? early_delay(11000);
> +
> + ? ? ? mx28_mem_init_clock();
> +
> + ? ? ? mx28_mem_setup_vdda();
> +
> + ? ? ? /*
> + ? ? ? ?* Configure the DRAM registers
> + ? ? ? ?*/
> +
> + ? ? ? /* Clear START bit from DRAM_CTL16 */
> + ? ? ? clrbits_le32(MXS_DRAM_BASE + 0x40, 1);
> +
> + ? ? ? init_m28_200mhz_ddr2();
> +
> + ? ? ? /* Clear SREFRESH bit from DRAM_CTL17 */
> + ? ? ? clrbits_le32(MXS_DRAM_BASE + 0x44, 1);
> +
> + ? ? ? /* Set START bit in DRAM_CTL16 */
> + ? ? ? setbits_le32(MXS_DRAM_BASE + 0x40, 1);
> +
> + ? ? ? /* Wait for bit 20 (DRAM init complete) in DRAM_CTL58 */
> + ? ? ? while (!(readl(MXS_DRAM_BASE + 0xe8) & (1 << 20)))
> + ? ? ? ? ? ? ? ;
> +
> + ? ? ? mx28_mem_setup_vddd();
> +
> + ? ? ? early_delay(10000);
> +
> + ? ? ? mx28_mem_setup_cpu_and_hbus();
> +}
> diff --git a/mmc_spl/board/denx/m28evk/mmc_boot.c b/mmc_spl/board/denx/m28evk/mmc_boot.c
> new file mode 100644
> index 0000000..4e670ea
> --- /dev/null
> +++ b/mmc_spl/board/denx/m28evk/mmc_boot.c
> @@ -0,0 +1,271 @@
> +/*
> + * Freescale i.MX28 Boot setup
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <config.h>
> +#include <asm/io.h>
> +#include <asm/arch/iomux-mx28.h>
> +
> +#include "m28_init.h"
> +
> +/*
> + * This delay function is intended to be used only in early stage of boot, where
> + * clock are not set up yet. The timer used here is reset on every boot and
> + * takes a few seconds to roll. The boot doesn't take that long, so to keep the
> + * code simple, it doesn't take rolling into consideration.
> + */
> +#define ? ? ? ?HW_DIGCTRL_MICROSECONDS 0x8001c0c0
> +void early_delay(int delay)
> +{
> + ? ? ? uint32_t st = readl(HW_DIGCTRL_MICROSECONDS);
> + ? ? ? st += delay;
> + ? ? ? while (st > readl(HW_DIGCTRL_MICROSECONDS))
> + ? ? ? ? ? ? ? ;
> +}
> +
> +#define ? ? ? ?MUX_CONFIG_LED ?(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
> +#define ? ? ? ?MUX_CONFIG_LCD ?(MXS_PAD_3V3 | MXS_PAD_4MA)
> +#define ? ? ? ?MUX_CONFIG_TSC ?(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
> +#define ? ? ? ?MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
> +#define ? ? ? ?MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
> +#define ? ? ? ?MUX_CONFIG_GPMI (MXS_PAD_1V8 | MXS_PAD_4MA | MXS_PAD_NOPULL)
> +#define ? ? ? ?MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
> +#define ? ? ? ?MUX_CONFIG_EMI ?(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
> +
> +const iomux_cfg_t iomux_setup[] = {
> + ? ? ? /* LED */
> + ? ? ? MX28_PAD_ENET0_RXD3__GPIO_4_10 | MUX_CONFIG_LED,
> +
> + ? ? ? /* framebuffer */
> + ? ? ? MX28_PAD_LCD_D00__LCD_D0 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D01__LCD_D1 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D02__LCD_D2 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D03__LCD_D3 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D04__LCD_D4 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D05__LCD_D5 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D06__LCD_D6 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D07__LCD_D7 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D08__LCD_D8 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D09__LCD_D9 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D18__LCD_D18 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D19__LCD_D19 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D20__LCD_D20 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D21__LCD_D21 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D22__LCD_D22 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_D23__LCD_D23 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_RD_E__LCD_VSYNC | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_RS__LCD_DOTCLK | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_CS__LCD_CS | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_VSYNC__LCD_VSYNC | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_HSYNC__LCD_HSYNC | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_ENABLE__GPIO_1_31 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_LCD_RESET__GPIO_3_30 | MUX_CONFIG_LCD,
> + ? ? ? MX28_PAD_PWM0__PWM_0 | MUX_CONFIG_LCD,
> +
> + ? ? ? /* UART1 */
> + ? ? ? MX28_PAD_AUART0_CTS__DUART_RX,
> + ? ? ? MX28_PAD_AUART0_RTS__DUART_TX,
> + ? ? ? MX28_PAD_AUART0_TX__DUART_RTS,
> + ? ? ? MX28_PAD_AUART0_RX__DUART_CTS,
> +
> + ? ? ? /* UART2 */
> + ? ? ? MX28_PAD_AUART1_RX__AUART1_RX,
> + ? ? ? MX28_PAD_AUART1_TX__AUART1_TX,
> + ? ? ? MX28_PAD_AUART1_RTS__AUART1_RTS,
> + ? ? ? MX28_PAD_AUART1_CTS__AUART1_CTS,
> +
> + ? ? ? /* CAN */
> + ? ? ? MX28_PAD_GPMI_RDY2__CAN0_TX,
> + ? ? ? MX28_PAD_GPMI_RDY3__CAN0_RX,
> +
> + ? ? ? /* I2C */
> + ? ? ? MX28_PAD_I2C0_SCL__I2C0_SCL,
> + ? ? ? MX28_PAD_I2C0_SDA__I2C0_SDA,
> +
> + ? ? ? /* TSC2007 */
> + ? ? ? MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MUX_CONFIG_TSC,
> +
> + ? ? ? /* MMC0 */
> + ? ? ? MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
> + ? ? ? MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
> + ? ? ? MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
> + ? ? ? MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
> + ? ? ? MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0,
> + ? ? ? MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0,
> + ? ? ? MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0,
> + ? ? ? MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0,
> + ? ? ? MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
> + ? ? ? MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
> + ? ? ? ? ? ? ? (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
> + ? ? ? MX28_PAD_SSP0_SCK__SSP0_SCK |
> + ? ? ? ? ? ? ? (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
> + ? ? ? MX28_PAD_PWM3__GPIO_3_28 | MUX_CONFIG_SSP0, ? ? /* Power .. FIXME */
> + ? ? ? MX28_PAD_AUART2_CTS__GPIO_3_10, /* WP ... FIXME */
> +
> + ? ? ? /* GPMI NAND */
> + ? ? ? MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
> + ? ? ? MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
> + ? ? ? MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
> + ? ? ? MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
> + ? ? ? MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
> + ? ? ? MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
> + ? ? ? MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
> + ? ? ? MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
> + ? ? ? MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
> + ? ? ? MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
> + ? ? ? MX28_PAD_GPMI_RDN__GPMI_RDN |
> + ? ? ? ? ? ? ? (MXS_PAD_1V8 | MXS_PAD_8MA | MXS_PAD_PULLUP),
> + ? ? ? MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
> + ? ? ? MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
> + ? ? ? MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
> + ? ? ? MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
> +
> + ? ? ? /* FEC Ethernet */
> + ? ? ? MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
> + ? ? ? MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
> + ? ? ? MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
> + ? ? ? MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
> + ? ? ? MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
> + ? ? ? MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
> + ? ? ? MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
> + ? ? ? MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
> + ? ? ? MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
> +
> + ? ? ? MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET,
> + ? ? ? MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET,
> + ? ? ? MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET,
> + ? ? ? MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
> + ? ? ? MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
> + ? ? ? MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
> +
> + ? ? ? /* I2C */
> + ? ? ? MX28_PAD_I2C0_SCL__I2C0_SCL,
> + ? ? ? MX28_PAD_I2C0_SDA__I2C0_SDA,
> +
> + ? ? ? /* EMI */
> + ? ? ? MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
> +
> + ? ? ? MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
> + ? ? ? MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
> +
> + ? ? ? /* SPI2 (for flash) */
> + ? ? ? MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
> + ? ? ? MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
> + ? ? ? MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
> + ? ? ? MX28_PAD_SSP2_SS0__SSP2_D3 |
> + ? ? ? ? ? ? ? (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
> +};
> +
> +void board_init_ll(void)
> +{
> + ? ? ? mxs_iomux_setup_multiple_pads(iomux_setup, ARRAY_SIZE(iomux_setup));
> + ? ? ? mx28_power_init();
> + ? ? ? mx28_mem_init();
> + ? ? ? mx28_power_wait_pswitch();
> +}
> +
> +/* Support aparatus */
> +inline void board_init_f(unsigned long bootflag)
> +{
> + ? ? ? for (;;)
> + ? ? ? ? ? ? ? ;
> +}
> +
> +inline void board_init_r(gd_t *id, ulong dest_addr)
> +{
> + ? ? ? for (;;)
> + ? ? ? ? ? ? ? ;
> +}
> +
> +inline void lowlevel_init(void) {}
> +
> +inline void __coloured_LED_init(void) {}
> +inline void __red_LED_on(void) {}
> +void coloured_LED_init(void)
> + ? ? ? __attribute__((weak, alias("__coloured_LED_init")));
> +void red_LED_on(void)
> + ? ? ? __attribute__((weak, alias("__red_LED_on")));
> +void hang(void) __attribute__ ((noreturn));
> +void hang(void)
> +{
> + ? ? ? for (;;)
> + ? ? ? ? ? ? ? ;
> +}
> diff --git a/mmc_spl/board/denx/m28evk/power_init.c b/mmc_spl/board/denx/m28evk/power_init.c
> new file mode 100644
> index 0000000..419b452
> --- /dev/null
> +++ b/mmc_spl/board/denx/m28evk/power_init.c
> @@ -0,0 +1,915 @@
> +/*
> + * Freescale i.MX28 Boot PMIC init
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <config.h>
> +#include <asm/io.h>
> +#include <asm/arch/regs-common.h>
> +#include <asm/arch/regs-base.h>
> +#include <asm/arch/regs-clkctrl.h>
> +#include <asm/arch/regs-rtc.h>
> +#include <asm/arch/regs-power.h>
> +
> +#include "m28_init.h"
> +
> +void mx28_power_clock2xtal(void)
> +{
> + ? ? ? struct mx28_clkctrl_regs *clkctrl_regs =
> + ? ? ? ? ? ? ? (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
> +
> + ? ? ? /* Set XTAL as CPU reference clock */
> + ? ? ? writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
> + ? ? ? ? ? ? ? &clkctrl_regs->hw_clkctrl_clkseq_set);
> +}
> +
> +void mx28_power_clock2pll(void)
> +{
> + ? ? ? struct mx28_clkctrl_regs *clkctrl_regs =
> + ? ? ? ? ? ? ? (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
> +
> + ? ? ? writel(CLKCTRL_PLL0CTRL0_POWER,
> + ? ? ? ? ? ? ? &clkctrl_regs->hw_clkctrl_pll0ctrl0_set);
> + ? ? ? early_delay(100);
> + ? ? ? writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
> + ? ? ? ? ? ? ? &clkctrl_regs->hw_clkctrl_clkseq_clr);
> +}
> +
> +void mx28_power_clear_auto_restart(void)
> +{
> + ? ? ? struct mx28_rtc_regs *rtc_regs =
> + ? ? ? ? ? ? ? (struct mx28_rtc_regs *)MXS_RTC_BASE;
> +
> + ? ? ? writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr);
> + ? ? ? while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST)
> + ? ? ? ? ? ? ? ;
> +
> + ? ? ? writel(RTC_CTRL_CLKGATE, &rtc_regs->hw_rtc_ctrl_clr);
> + ? ? ? while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_CLKGATE)
> + ? ? ? ? ? ? ? ;
> +
> + ? ? ? /*
> + ? ? ? ?* Due to the hardware design bug of mx28 EVK-A
> + ? ? ? ?* we need to set the AUTO_RESTART bit.
> + ? ? ? ?*/
> + ? ? ? if (readl(&rtc_regs->hw_rtc_persistent0) & RTC_PERSISTENT0_AUTO_RESTART)
> + ? ? ? ? ? ? ? return;
> +
> + ? ? ? while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
> + ? ? ? ? ? ? ? ;
> +
> + ? ? ? setbits_le32(&rtc_regs->hw_rtc_persistent0,
> + ? ? ? ? ? ? ? ? ? ? ? RTC_PERSISTENT0_AUTO_RESTART);
> + ? ? ? writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_set);
> + ? ? ? writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_clr);
> + ? ? ? while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
> + ? ? ? ? ? ? ? ;
> + ? ? ? while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_STALE_REGS_MASK)
> + ? ? ? ? ? ? ? ;
> +}
> +
> +void mx28_power_set_linreg(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + ? ? ? /* Set linear regulator 25mV below switching converter */
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_vdddctrl,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDDCTRL_LINREG_OFFSET_MASK,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
> +
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_vddactrl,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDACTRL_LINREG_OFFSET_MASK,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW);
> +
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_vddioctrl,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDIOCTRL_LINREG_OFFSET_MASK,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW);
> +}
> +
> +void mx28_power_setup_5v_detect(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + ? ? ? /* Start 5V detection */
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_5vctrl,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_5VCTRL_VBUSVALID_TRSH_MASK,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_5VCTRL_VBUSVALID_TRSH_4V4 |
> + ? ? ? ? ? ? ? ? ? ? ? POWER_5VCTRL_PWRUP_VBUS_CMPS);
> +}
> +
> +void mx28_src_power_init(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + ? ? ? /* Improve efficieny and reduce transient ripple */
> + ? ? ? writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST |
> + ? ? ? ? ? ? ? POWER_LOOPCTRL_EN_DF_HYST, &power_regs->hw_power_loopctrl_set);
> +
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_dclimits,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_DCLIMITS_POSLIMIT_BUCK_MASK,
> + ? ? ? ? ? ? ? ? ? ? ? 0x30 << POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET);
> +
> + ? ? ? setbits_le32(&power_regs->hw_power_battmonitor,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_BATTMONITOR_EN_BATADJ);
> +
> + ? ? ? /* Increase the RCSCALE level for quick DCDC response to dynamic load */
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_loopctrl,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_LOOPCTRL_EN_RCSCALE_MASK,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_LOOPCTRL_RCSCALE_THRESH |
> + ? ? ? ? ? ? ? ? ? ? ? POWER_LOOPCTRL_EN_RCSCALE_8X);
> +
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_minpwr,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS);
> +
> + ? ? ? /* 5V to battery handoff ... FIXME */
> + ? ? ? setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
> + ? ? ? early_delay(30);
> + ? ? ? clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
> +}
> +
> +void mx28_power_init_4p2_params(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + ? ? ? /* Setup 4P2 parameters */
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
> + ? ? ? ? ? ? ? POWER_DCDC4P2_CMPTRIP_MASK | POWER_DCDC4P2_TRG_MASK,
> + ? ? ? ? ? ? ? POWER_DCDC4P2_TRG_4V2 | (31 << POWER_DCDC4P2_CMPTRIP_OFFSET));
> +
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_5vctrl,
> + ? ? ? ? ? ? ? POWER_5VCTRL_HEADROOM_ADJ_MASK,
> + ? ? ? ? ? ? ? 0x4 << POWER_5VCTRL_HEADROOM_ADJ_OFFSET);
> +
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
> + ? ? ? ? ? ? ? POWER_DCDC4P2_DROPOUT_CTRL_MASK,
> + ? ? ? ? ? ? ? POWER_DCDC4P2_DROPOUT_CTRL_100MV |
> + ? ? ? ? ? ? ? POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL);
> +
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_5vctrl,
> + ? ? ? ? ? ? ? POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
> + ? ? ? ? ? ? ? 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
> +}
> +
> +void mx28_enable_4p2_dcdc_input(int xfer)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> + ? ? ? uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo;
> + ? ? ? uint32_t prev_5v_brnout, prev_5v_droop;
> +
> + ? ? ? prev_5v_brnout = readl(&power_regs->hw_power_5vctrl) &
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_5VCTRL_PWDN_5VBRNOUT;
> + ? ? ? prev_5v_droop = readl(&power_regs->hw_power_ctrl) &
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_CTRL_ENIRQ_VDD5V_DROOP;
> +
> + ? ? ? clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT);
> + ? ? ? writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
> + ? ? ? ? ? ? ? &power_regs->hw_power_reset);
> +
> + ? ? ? clrbits_le32(&power_regs->hw_power_ctrl, POWER_CTRL_ENIRQ_VDD5V_DROOP);
> +
> + ? ? ? if (xfer && (readl(&power_regs->hw_power_5vctrl) &
> + ? ? ? ? ? ? ? ? ? ? ? POWER_5VCTRL_ENABLE_DCDC)) {
> + ? ? ? ? ? ? ? return;
> + ? ? ? }
> +
> + ? ? ? /*
> + ? ? ? ?* Recording orignal values that will be modified temporarlily
> + ? ? ? ?* to handle a chip bug. See chip errata for CQ ENGR00115837
> + ? ? ? ?*/
> + ? ? ? tmp = readl(&power_regs->hw_power_5vctrl);
> + ? ? ? vbus_thresh = tmp & POWER_5VCTRL_VBUSVALID_TRSH_MASK;
> + ? ? ? vbus_5vdetect = tmp & POWER_5VCTRL_VBUSVALID_5VDETECT;
> +
> + ? ? ? pwd_bo = readl(&power_regs->hw_power_minpwr) & POWER_MINPWR_PWD_BO;
> +
> + ? ? ? /*
> + ? ? ? ?* Disable mechanisms that get erroneously tripped by when setting
> + ? ? ? ?* the DCDC4P2 EN_DCDC
> + ? ? ? ?*/
> + ? ? ? clrbits_le32(&power_regs->hw_power_5vctrl,
> + ? ? ? ? ? ? ? POWER_5VCTRL_VBUSVALID_5VDETECT |
> + ? ? ? ? ? ? ? POWER_5VCTRL_VBUSVALID_TRSH_MASK);
> +
> + ? ? ? writel(POWER_MINPWR_PWD_BO, &power_regs->hw_power_minpwr_set);
> +
> + ? ? ? if (xfer) {
> + ? ? ? ? ? ? ? setbits_le32(&power_regs->hw_power_5vctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_5VCTRL_DCDC_XFER);
> + ? ? ? ? ? ? ? early_delay(20);
> + ? ? ? ? ? ? ? clrbits_le32(&power_regs->hw_power_5vctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_5VCTRL_DCDC_XFER);
> +
> + ? ? ? ? ? ? ? setbits_le32(&power_regs->hw_power_5vctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_5VCTRL_ENABLE_DCDC);
> + ? ? ? } else {
> + ? ? ? ? ? ? ? setbits_le32(&power_regs->hw_power_dcdc4p2,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_DCDC4P2_ENABLE_DCDC);
> + ? ? ? }
> +
> + ? ? ? early_delay(25);
> +
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_5vctrl,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_5VCTRL_VBUSVALID_TRSH_MASK, vbus_thresh);
> +
> + ? ? ? if (vbus_5vdetect)
> + ? ? ? ? ? ? ? writel(vbus_5vdetect, &power_regs->hw_power_5vctrl_set);
> +
> + ? ? ? if (!pwd_bo)
> + ? ? ? ? ? ? ? clrbits_le32(&power_regs->hw_power_minpwr, POWER_MINPWR_PWD_BO);
> +
> + ? ? ? while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ)
> + ? ? ? ? ? ? ? clrbits_le32(&power_regs->hw_power_ctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_CTRL_VBUS_VALID_IRQ);
> +
> + ? ? ? if (prev_5v_brnout) {
> + ? ? ? ? ? ? ? writel(POWER_5VCTRL_PWDN_5VBRNOUT,
> + ? ? ? ? ? ? ? ? ? ? ? &power_regs->hw_power_5vctrl_set);
> + ? ? ? ? ? ? ? writel(POWER_RESET_UNLOCK_KEY,
> + ? ? ? ? ? ? ? ? ? ? ? &power_regs->hw_power_reset);
> + ? ? ? } else {
> + ? ? ? ? ? ? ? writel(POWER_5VCTRL_PWDN_5VBRNOUT,
> + ? ? ? ? ? ? ? ? ? ? ? &power_regs->hw_power_5vctrl_clr);
> + ? ? ? ? ? ? ? writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
> + ? ? ? ? ? ? ? ? ? ? ? &power_regs->hw_power_reset);
> + ? ? ? }
> +
> + ? ? ? while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VDD5V_DROOP_IRQ)
> + ? ? ? ? ? ? ? clrbits_le32(&power_regs->hw_power_ctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_CTRL_VDD5V_DROOP_IRQ);
> +
> + ? ? ? if (prev_5v_droop)
> + ? ? ? ? ? ? ? clrbits_le32(&power_regs->hw_power_ctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_CTRL_ENIRQ_VDD5V_DROOP);
> + ? ? ? else
> + ? ? ? ? ? ? ? setbits_le32(&power_regs->hw_power_ctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_CTRL_ENIRQ_VDD5V_DROOP);
> +}
> +
> +void mx28_power_init_4p2_regulator(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> + ? ? ? uint32_t tmp, tmp2;
> +
> + ? ? ? setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2);
> +
> + ? ? ? writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_set);
> +
> + ? ? ? writel(POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
> + ? ? ? ? ? ? ? &power_regs->hw_power_5vctrl_clr);
> + ? ? ? clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_TRG_MASK);
> +
> + ? ? ? /* Power up the 4p2 rail and logic/control */
> + ? ? ? writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
> + ? ? ? ? ? ? ? &power_regs->hw_power_5vctrl_clr);
> +
> + ? ? ? /*
> + ? ? ? ?* Start charging up the 4p2 capacitor. We ramp of this charge
> + ? ? ? ?* gradually to avoid large inrush current from the 5V cable which can
> + ? ? ? ?* cause transients/problems
> + ? ? ? ?*/
> + ? ? ? mx28_enable_4p2_dcdc_input(0);
> +
> + ? ? ? if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
> + ? ? ? ? ? ? ? /*
> + ? ? ? ? ? ? ? ?* If we arrived here, we were unable to recover from mx23 chip
> + ? ? ? ? ? ? ? ?* errata 5837. 4P2 is disabled and sufficient battery power is
> + ? ? ? ? ? ? ? ?* not present. Exiting to not enable DCDC power during 5V
> + ? ? ? ? ? ? ? ?* connected state.
> + ? ? ? ? ? ? ? ?*/
> + ? ? ? ? ? ? ? clrbits_le32(&power_regs->hw_power_dcdc4p2,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_DCDC4P2_ENABLE_DCDC);
> + ? ? ? ? ? ? ? writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
> + ? ? ? ? ? ? ? ? ? ? ? &power_regs->hw_power_5vctrl_set);
> + ? ? ? ? ? ? ? hang();
> + ? ? ? }
> +
> + ? ? ? /*
> + ? ? ? ?* Here we set the 4p2 brownout level to something very close to 4.2V.
> + ? ? ? ?* We then check the brownout status. If the brownout status is false,
> + ? ? ? ?* the voltage is already close to the target voltage of 4.2V so we
> + ? ? ? ?* can go ahead and set the 4P2 current limit to our max target limit.
> + ? ? ? ?* If the brownout status is true, we need to ramp us the current limit
> + ? ? ? ?* so that we don't cause large inrush current issues. We step up the
> + ? ? ? ?* current limit until the brownout status is false or until we've
> + ? ? ? ?* reached our maximum defined 4p2 current limit.
> + ? ? ? ?*/
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_DCDC4P2_BO_MASK,
> + ? ? ? ? ? ? ? ? ? ? ? 22 << POWER_DCDC4P2_BO_OFFSET); /* 4.15V */
> +
> + ? ? ? if (!(readl(&power_regs->hw_power_sts) & POWER_STS_DCDC_4P2_BO)) {
> + ? ? ? ? ? ? ? setbits_le32(&power_regs->hw_power_5vctrl,
> + ? ? ? ? ? ? ? ? ? ? ? 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
> + ? ? ? } else {
> + ? ? ? ? ? ? ? tmp = (readl(&power_regs->hw_power_5vctrl) &
> + ? ? ? ? ? ? ? ? ? ? ? POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK) >>
> + ? ? ? ? ? ? ? ? ? ? ? POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
> + ? ? ? ? ? ? ? while (tmp < 0x3f) {
> + ? ? ? ? ? ? ? ? ? ? ? if (!(readl(&power_regs->hw_power_sts) &
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_STS_DCDC_4P2_BO)) {
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? tmp = readl(&power_regs->hw_power_5vctrl);
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? tmp |= POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? early_delay(100);
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? writel(tmp, &power_regs->hw_power_5vctrl);
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? break;
> + ? ? ? ? ? ? ? ? ? ? ? } else {
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? tmp++;
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? tmp2 = readl(&power_regs->hw_power_5vctrl);
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? tmp2 &= ~POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? tmp2 |= tmp <<
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? writel(tmp2, &power_regs->hw_power_5vctrl);
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? early_delay(100);
> + ? ? ? ? ? ? ? ? ? ? ? }
> + ? ? ? ? ? ? ? }
> + ? ? ? }
> +
> + ? ? ? clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK);
> + ? ? ? writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
> +}
> +
> +void mx28_power_init_dcdc_4p2_source(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + ? ? ? if (!(readl(&power_regs->hw_power_dcdc4p2) &
> + ? ? ? ? ? ? ? POWER_DCDC4P2_ENABLE_DCDC)) {
> + ? ? ? ? ? ? ? hang();
> + ? ? ? }
> +
> + ? ? ? mx28_enable_4p2_dcdc_input(1);
> +
> + ? ? ? if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
> + ? ? ? ? ? ? ? clrbits_le32(&power_regs->hw_power_dcdc4p2,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_DCDC4P2_ENABLE_DCDC);
> + ? ? ? ? ? ? ? writel(POWER_5VCTRL_ENABLE_DCDC,
> + ? ? ? ? ? ? ? ? ? ? ? &power_regs->hw_power_5vctrl_clr);
> + ? ? ? ? ? ? ? writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
> + ? ? ? ? ? ? ? ? ? ? ? &power_regs->hw_power_5vctrl_set);
> + ? ? ? }
> +}
> +
> +void mx28_power_enable_4p2(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> + ? ? ? uint32_t vdddctrl, vddactrl, vddioctrl;
> + ? ? ? uint32_t tmp;
> +
> + ? ? ? vdddctrl = readl(&power_regs->hw_power_vdddctrl);
> + ? ? ? vddactrl = readl(&power_regs->hw_power_vddactrl);
> + ? ? ? vddioctrl = readl(&power_regs->hw_power_vddioctrl);
> +
> + ? ? ? setbits_le32(&power_regs->hw_power_vdddctrl,
> + ? ? ? ? ? ? ? POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
> + ? ? ? ? ? ? ? POWER_VDDDCTRL_PWDN_BRNOUT);
> +
> + ? ? ? setbits_le32(&power_regs->hw_power_vddactrl,
> + ? ? ? ? ? ? ? POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG |
> + ? ? ? ? ? ? ? POWER_VDDACTRL_PWDN_BRNOUT);
> +
> + ? ? ? setbits_le32(&power_regs->hw_power_vddioctrl,
> + ? ? ? ? ? ? ? POWER_VDDIOCTRL_DISABLE_FET | POWER_VDDIOCTRL_PWDN_BRNOUT);
> +
> + ? ? ? mx28_power_init_4p2_params();
> + ? ? ? mx28_power_init_4p2_regulator();
> +
> + ? ? ? /* Shutdown battery (none present) */
> + ? ? ? clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK);
> + ? ? ? writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
> + ? ? ? writel(POWER_CTRL_ENIRQ_DCDC4P2_BO, &power_regs->hw_power_ctrl_clr);
> +
> + ? ? ? mx28_power_init_dcdc_4p2_source();
> +
> + ? ? ? writel(vdddctrl, &power_regs->hw_power_vdddctrl);
> + ? ? ? early_delay(20);
> + ? ? ? writel(vddactrl, &power_regs->hw_power_vddactrl);
> + ? ? ? early_delay(20);
> + ? ? ? writel(vddioctrl, &power_regs->hw_power_vddioctrl);
> +
> + ? ? ? /*
> + ? ? ? ?* Check if FET is enabled on either powerout and if so,
> + ? ? ? ?* disable load.
> + ? ? ? ?*/
> + ? ? ? tmp = 0;
> + ? ? ? tmp |= !(readl(&power_regs->hw_power_vdddctrl) &
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDDCTRL_DISABLE_FET);
> + ? ? ? tmp |= !(readl(&power_regs->hw_power_vddactrl) &
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDACTRL_DISABLE_FET);
> + ? ? ? tmp |= !(readl(&power_regs->hw_power_vddioctrl) &
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDIOCTRL_DISABLE_FET);
> + ? ? ? if (tmp)
> + ? ? ? ? ? ? ? writel(POWER_CHARGE_ENABLE_LOAD,
> + ? ? ? ? ? ? ? ? ? ? ? &power_regs->hw_power_charge_clr);
> +}
> +
> +void mx28_boot_valid_5v(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + ? ? ? /*
> + ? ? ? ?* Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V
> + ? ? ? ?* disconnect event. FIXME
> + ? ? ? ?*/
> + ? ? ? writel(POWER_5VCTRL_VBUSVALID_5VDETECT,
> + ? ? ? ? ? ? ? &power_regs->hw_power_5vctrl_set);
> +
> + ? ? ? /* Configure polarity to check for 5V disconnection. */
> + ? ? ? writel(POWER_CTRL_POLARITY_VBUSVALID |
> + ? ? ? ? ? ? ? POWER_CTRL_POLARITY_VDD5V_GT_VDDIO,
> + ? ? ? ? ? ? ? &power_regs->hw_power_ctrl_clr);
> +
> + ? ? ? writel(POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_VDD5V_GT_VDDIO_IRQ,
> + ? ? ? ? ? ? ? &power_regs->hw_power_ctrl_clr);
> +
> + ? ? ? mx28_power_enable_4p2();
> +}
> +
> +void mx28_powerdown(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> + ? ? ? writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset);
> + ? ? ? writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
> + ? ? ? ? ? ? ? &power_regs->hw_power_reset);
> +}
> +
> +void mx28_handle_5v_conflict(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> + ? ? ? uint32_t tmp;
> +
> + ? ? ? setbits_le32(&power_regs->hw_power_vddioctrl,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDIOCTRL_BO_OFFSET_MASK);
> +
> + ? ? ? for (;;) {
> + ? ? ? ? ? ? ? tmp = readl(&power_regs->hw_power_sts);
> +
> + ? ? ? ? ? ? ? if (tmp & POWER_STS_VDDIO_BO) {
> + ? ? ? ? ? ? ? ? ? ? ? mx28_powerdown();
> + ? ? ? ? ? ? ? ? ? ? ? break;
> + ? ? ? ? ? ? ? }
> +
> + ? ? ? ? ? ? ? if (tmp & POWER_STS_VDD5V_GT_VDDIO) {
> + ? ? ? ? ? ? ? ? ? ? ? mx28_boot_valid_5v();
> + ? ? ? ? ? ? ? ? ? ? ? break;
> + ? ? ? ? ? ? ? } else {
> + ? ? ? ? ? ? ? ? ? ? ? mx28_powerdown();
> + ? ? ? ? ? ? ? ? ? ? ? break;
> + ? ? ? ? ? ? ? }
> + ? ? ? }
> +}
> +
> +int mx28_get_batt_volt(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> + ? ? ? uint32_t volt = readl(&power_regs->hw_power_battmonitor);
> + ? ? ? volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
> + ? ? ? volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
> + ? ? ? volt *= 8;
> + ? ? ? return volt;
> +}
> +
> +int mx28_is_batt_ready(void)
> +{
> + ? ? ? return (mx28_get_batt_volt() >= 3600);
> +}
> +
> +void mx28_5v_boot(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + ? ? ? /*
> + ? ? ? ?* NOTE: In original IMX-Bootlets, this also checks for VBUSVALID,
> + ? ? ? ?* but their implementation always returns 1 so we omit it here.
> + ? ? ? ?*/
> + ? ? ? if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
> + ? ? ? ? ? ? ? mx28_boot_valid_5v();
> + ? ? ? ? ? ? ? return;
> + ? ? ? }
> +
> + ? ? ? early_delay(1000);
> + ? ? ? if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
> + ? ? ? ? ? ? ? mx28_boot_valid_5v();
> + ? ? ? ? ? ? ? return;
> + ? ? ? }
> +
> + ? ? ? mx28_handle_5v_conflict();
> +}
> +
> +void mx28_init_batt_bo(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + ? ? ? /* Brownout at 3V */
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_battmonitor,
> + ? ? ? ? ? ? ? POWER_BATTMONITOR_BRWNOUT_LVL_MASK,
> + ? ? ? ? ? ? ? 15 << POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET);
> +
> + ? ? ? writel(POWER_CTRL_BATT_BO_IRQ, &power_regs->hw_power_ctrl_clr);
> + ? ? ? writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr);
> +}
> +
> +void mx28_switch_vddd_to_dcdc_source(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_vdddctrl,
> + ? ? ? ? ? ? ? POWER_VDDDCTRL_LINREG_OFFSET_MASK,
> + ? ? ? ? ? ? ? POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
> +
> + ? ? ? clrbits_le32(&power_regs->hw_power_vdddctrl,
> + ? ? ? ? ? ? ? POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
> + ? ? ? ? ? ? ? POWER_VDDDCTRL_DISABLE_STEPPING);
> +}
> +
> +int mx28_is_batt_good(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> + ? ? ? uint32_t volt;
> +
> + ? ? ? volt = readl(&power_regs->hw_power_battmonitor);
> + ? ? ? volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
> + ? ? ? volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
> + ? ? ? volt *= 8;
> +
> + ? ? ? if ((volt >= 2400) && (volt <= 4300))
> + ? ? ? ? ? ? ? return 1;
> +
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_5vctrl,
> + ? ? ? ? ? ? ? POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
> + ? ? ? ? ? ? ? 0x3 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
> + ? ? ? writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
> + ? ? ? ? ? ? ? &power_regs->hw_power_5vctrl_clr);
> +
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_charge,
> + ? ? ? ? ? ? ? POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
> + ? ? ? ? ? ? ? POWER_CHARGE_STOP_ILIMIT_10MA | 0x3);
> +
> + ? ? ? writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_clr);
> + ? ? ? writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
> + ? ? ? ? ? ? ? &power_regs->hw_power_5vctrl_clr);
> +
> + ? ? ? early_delay(500000);
> +
> + ? ? ? volt = readl(&power_regs->hw_power_battmonitor);
> + ? ? ? volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
> + ? ? ? volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
> + ? ? ? volt *= 8;
> +
> + ? ? ? if (volt >= 3500)
> + ? ? ? ? ? ? ? return 0;
> +
> + ? ? ? if (volt >= 2400)
> + ? ? ? ? ? ? ? return 1;
> +
> + ? ? ? writel(POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
> + ? ? ? ? ? ? ? &power_regs->hw_power_charge_clr);
> + ? ? ? writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set);
> +
> + ? ? ? return 0;
> +}
> +
> +void mx28_power_configure_power_source(void)
> +{
> + ? ? ? mx28_src_power_init();
> +
> + ? ? ? mx28_5v_boot();
> + ? ? ? mx28_power_clock2pll();
> +
> + ? ? ? mx28_init_batt_bo();
> + ? ? ? mx28_switch_vddd_to_dcdc_source();
> +}
> +
> +void mx28_enable_output_rail_protection(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + ? ? ? writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
> + ? ? ? ? ? ? ? POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr);
> +
> + ? ? ? setbits_le32(&power_regs->hw_power_vdddctrl,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDDCTRL_PWDN_BRNOUT);
> +
> + ? ? ? setbits_le32(&power_regs->hw_power_vddactrl,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDACTRL_PWDN_BRNOUT);
> +
> + ? ? ? setbits_le32(&power_regs->hw_power_vddioctrl,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDIOCTRL_PWDN_BRNOUT);
> +}
> +
> +int mx28_get_vddio_power_source_off(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> + ? ? ? uint32_t tmp;
> +
> + ? ? ? if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
> + ? ? ? ? ? ? ? tmp = readl(&power_regs->hw_power_vddioctrl);
> + ? ? ? ? ? ? ? if (tmp & POWER_VDDIOCTRL_DISABLE_FET) {
> + ? ? ? ? ? ? ? ? ? ? ? if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? return 1;
> + ? ? ? ? ? ? ? ? ? ? ? }
> + ? ? ? ? ? ? ? }
> +
> + ? ? ? ? ? ? ? if (!(readl(&power_regs->hw_power_5vctrl) &
> + ? ? ? ? ? ? ? ? ? ? ? POWER_5VCTRL_ENABLE_DCDC)) {
> + ? ? ? ? ? ? ? ? ? ? ? if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? return 1;
> + ? ? ? ? ? ? ? ? ? ? ? }
> + ? ? ? ? ? ? ? }
> + ? ? ? }
> +
> + ? ? ? return 0;
> +
> +}
> +
> +int mx28_get_vddd_power_source_off(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> + ? ? ? uint32_t tmp;
> +
> + ? ? ? tmp = readl(&power_regs->hw_power_vdddctrl);
> + ? ? ? if (tmp & POWER_VDDDCTRL_DISABLE_FET) {
> + ? ? ? ? ? ? ? if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
> + ? ? ? ? ? ? ? ? ? ? ? return 1;
> + ? ? ? ? ? ? ? }
> + ? ? ? }
> +
> + ? ? ? if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
> + ? ? ? ? ? ? ? if (!(readl(&power_regs->hw_power_5vctrl) &
> + ? ? ? ? ? ? ? ? ? ? ? POWER_5VCTRL_ENABLE_DCDC)) {
> + ? ? ? ? ? ? ? ? ? ? ? return 1;
> + ? ? ? ? ? ? ? }
> + ? ? ? }
> +
> + ? ? ? if (!(tmp & POWER_VDDDCTRL_ENABLE_LINREG)) {
> + ? ? ? ? ? ? ? if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW) {
> + ? ? ? ? ? ? ? ? ? ? ? return 1;
> + ? ? ? ? ? ? ? }
> + ? ? ? }
> +
> + ? ? ? return 0;
> +}
> +
> +void mx28_power_set_vddio(uint32_t new_target, uint32_t new_brownout)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> + ? ? ? uint32_t cur_target, diff, bo_int = 0;
> + ? ? ? uint32_t powered_by_linreg = 0;
> +
> + ? ? ? new_brownout = new_target - new_brownout;
> +
> + ? ? ? cur_target = readl(&power_regs->hw_power_vddioctrl);
> + ? ? ? cur_target &= POWER_VDDIOCTRL_TRG_MASK;
> + ? ? ? cur_target *= 50; ? ? ? /* 50 mV step*/
> + ? ? ? cur_target += 2800; ? ? /* 2800 mV lowest */
> +
> + ? ? ? powered_by_linreg = mx28_get_vddio_power_source_off();
> + ? ? ? if (new_target > cur_target) {
> +
> + ? ? ? ? ? ? ? if (powered_by_linreg) {
> + ? ? ? ? ? ? ? ? ? ? ? bo_int = readl(&power_regs->hw_power_vddioctrl);
> + ? ? ? ? ? ? ? ? ? ? ? clrbits_le32(&power_regs->hw_power_vddioctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_CTRL_ENIRQ_VDDIO_BO);
> + ? ? ? ? ? ? ? }
> +
> + ? ? ? ? ? ? ? setbits_le32(&power_regs->hw_power_vddioctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_VDDIOCTRL_BO_OFFSET_MASK);
> + ? ? ? ? ? ? ? do {
> + ? ? ? ? ? ? ? ? ? ? ? if (new_target - cur_target > 100)
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? diff = cur_target + 100;
> + ? ? ? ? ? ? ? ? ? ? ? else
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? diff = new_target;
> +
> + ? ? ? ? ? ? ? ? ? ? ? diff -= 2800;
> + ? ? ? ? ? ? ? ? ? ? ? diff /= 50;
> +
> + ? ? ? ? ? ? ? ? ? ? ? clrsetbits_le32(&power_regs->hw_power_vddioctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_VDDIOCTRL_TRG_MASK, diff);
> +
> + ? ? ? ? ? ? ? ? ? ? ? if (powered_by_linreg)
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? early_delay(1500);
> + ? ? ? ? ? ? ? ? ? ? ? else {
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? while (!(readl(&power_regs->hw_power_sts) &
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_STS_DC_OK))
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ;
> +
> + ? ? ? ? ? ? ? ? ? ? ? }
> +
> + ? ? ? ? ? ? ? ? ? ? ? cur_target = readl(&power_regs->hw_power_vddioctrl);
> + ? ? ? ? ? ? ? ? ? ? ? cur_target &= POWER_VDDIOCTRL_TRG_MASK;
> + ? ? ? ? ? ? ? ? ? ? ? cur_target *= 50; ? ? ? /* 50 mV step*/
> + ? ? ? ? ? ? ? ? ? ? ? cur_target += 2800; ? ? /* 2800 mV lowest */
> + ? ? ? ? ? ? ? } while (new_target > cur_target);
> +
> + ? ? ? ? ? ? ? if (powered_by_linreg) {
> + ? ? ? ? ? ? ? ? ? ? ? writel(POWER_CTRL_VDDIO_BO_IRQ,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? &power_regs->hw_power_ctrl_clr);
> + ? ? ? ? ? ? ? ? ? ? ? if (bo_int & POWER_CTRL_ENIRQ_VDDIO_BO)
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? setbits_le32(&power_regs->hw_power_vddioctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_CTRL_ENIRQ_VDDIO_BO);
> + ? ? ? ? ? ? ? }
> + ? ? ? } else {
> + ? ? ? ? ? ? ? do {
> + ? ? ? ? ? ? ? ? ? ? ? if (cur_target - new_target > 100)
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? diff = cur_target - 100;
> + ? ? ? ? ? ? ? ? ? ? ? else
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? diff = new_target;
> +
> + ? ? ? ? ? ? ? ? ? ? ? diff -= 2800;
> + ? ? ? ? ? ? ? ? ? ? ? diff /= 50;
> +
> + ? ? ? ? ? ? ? ? ? ? ? clrsetbits_le32(&power_regs->hw_power_vddioctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_VDDIOCTRL_TRG_MASK, diff);
> +
> + ? ? ? ? ? ? ? ? ? ? ? if (powered_by_linreg)
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? early_delay(1500);
> + ? ? ? ? ? ? ? ? ? ? ? else {
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? while (!(readl(&power_regs->hw_power_sts) &
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_STS_DC_OK))
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ;
> +
> + ? ? ? ? ? ? ? ? ? ? ? }
> +
> + ? ? ? ? ? ? ? ? ? ? ? cur_target = readl(&power_regs->hw_power_vddioctrl);
> + ? ? ? ? ? ? ? ? ? ? ? cur_target &= POWER_VDDIOCTRL_TRG_MASK;
> + ? ? ? ? ? ? ? ? ? ? ? cur_target *= 50; ? ? ? /* 50 mV step*/
> + ? ? ? ? ? ? ? ? ? ? ? cur_target += 2800; ? ? /* 2800 mV lowest */
> + ? ? ? ? ? ? ? } while (new_target < cur_target);
> + ? ? ? }
> +
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_vddioctrl,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDDCTRL_BO_OFFSET_MASK,
> + ? ? ? ? ? ? ? ? ? ? ? new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET);
> +}
> +
> +void mx28_power_set_vddd(uint32_t new_target, uint32_t new_brownout)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> + ? ? ? uint32_t cur_target, diff, bo_int = 0;
> + ? ? ? uint32_t powered_by_linreg = 0;
> +
> + ? ? ? new_brownout = new_target - new_brownout;
> +
> + ? ? ? cur_target = readl(&power_regs->hw_power_vdddctrl);
> + ? ? ? cur_target &= POWER_VDDDCTRL_TRG_MASK;
> + ? ? ? cur_target *= 25; ? ? ? /* 25 mV step*/
> + ? ? ? cur_target += 800; ? ? ?/* 800 mV lowest */
> +
> + ? ? ? powered_by_linreg = mx28_get_vddd_power_source_off();
> + ? ? ? if (new_target > cur_target) {
> + ? ? ? ? ? ? ? if (powered_by_linreg) {
> + ? ? ? ? ? ? ? ? ? ? ? bo_int = readl(&power_regs->hw_power_vdddctrl);
> + ? ? ? ? ? ? ? ? ? ? ? clrbits_le32(&power_regs->hw_power_vdddctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_CTRL_ENIRQ_VDDD_BO);
> + ? ? ? ? ? ? ? }
> +
> + ? ? ? ? ? ? ? setbits_le32(&power_regs->hw_power_vdddctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_VDDDCTRL_BO_OFFSET_MASK);
> +
> + ? ? ? ? ? ? ? do {
> + ? ? ? ? ? ? ? ? ? ? ? if (new_target - cur_target > 100)
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? diff = cur_target + 100;
> + ? ? ? ? ? ? ? ? ? ? ? else
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? diff = new_target;
> +
> + ? ? ? ? ? ? ? ? ? ? ? diff -= 800;
> + ? ? ? ? ? ? ? ? ? ? ? diff /= 25;
> +
> + ? ? ? ? ? ? ? ? ? ? ? clrsetbits_le32(&power_regs->hw_power_vdddctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_VDDDCTRL_TRG_MASK, diff);
> +
> + ? ? ? ? ? ? ? ? ? ? ? if (powered_by_linreg)
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? early_delay(1500);
> + ? ? ? ? ? ? ? ? ? ? ? else {
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? while (!(readl(&power_regs->hw_power_sts) &
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_STS_DC_OK))
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ;
> +
> + ? ? ? ? ? ? ? ? ? ? ? }
> +
> + ? ? ? ? ? ? ? ? ? ? ? cur_target = readl(&power_regs->hw_power_vdddctrl);
> + ? ? ? ? ? ? ? ? ? ? ? cur_target &= POWER_VDDDCTRL_TRG_MASK;
> + ? ? ? ? ? ? ? ? ? ? ? cur_target *= 25; ? ? ? /* 25 mV step*/
> + ? ? ? ? ? ? ? ? ? ? ? cur_target += 800; ? ? ?/* 800 mV lowest */
> + ? ? ? ? ? ? ? } while (new_target > cur_target);
> +
> + ? ? ? ? ? ? ? if (powered_by_linreg) {
> + ? ? ? ? ? ? ? ? ? ? ? writel(POWER_CTRL_VDDD_BO_IRQ,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? &power_regs->hw_power_ctrl_clr);
> + ? ? ? ? ? ? ? ? ? ? ? if (bo_int & POWER_CTRL_ENIRQ_VDDD_BO)
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? setbits_le32(&power_regs->hw_power_vdddctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_CTRL_ENIRQ_VDDD_BO);
> + ? ? ? ? ? ? ? }
> + ? ? ? } else {
> + ? ? ? ? ? ? ? do {
> + ? ? ? ? ? ? ? ? ? ? ? if (cur_target - new_target > 100)
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? diff = cur_target - 100;
> + ? ? ? ? ? ? ? ? ? ? ? else
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? diff = new_target;
> +
> + ? ? ? ? ? ? ? ? ? ? ? diff -= 800;
> + ? ? ? ? ? ? ? ? ? ? ? diff /= 25;
> +
> + ? ? ? ? ? ? ? ? ? ? ? clrsetbits_le32(&power_regs->hw_power_vdddctrl,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_VDDDCTRL_TRG_MASK, diff);
> +
> + ? ? ? ? ? ? ? ? ? ? ? if (powered_by_linreg)
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? early_delay(1500);
> + ? ? ? ? ? ? ? ? ? ? ? else {
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? while (!(readl(&power_regs->hw_power_sts) &
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? POWER_STS_DC_OK))
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ;
> +
> + ? ? ? ? ? ? ? ? ? ? ? }
> +
> + ? ? ? ? ? ? ? ? ? ? ? cur_target = readl(&power_regs->hw_power_vdddctrl);
> + ? ? ? ? ? ? ? ? ? ? ? cur_target &= POWER_VDDDCTRL_TRG_MASK;
> + ? ? ? ? ? ? ? ? ? ? ? cur_target *= 25; ? ? ? /* 25 mV step*/
> + ? ? ? ? ? ? ? ? ? ? ? cur_target += 800; ? ? ?/* 800 mV lowest */
> + ? ? ? ? ? ? ? } while (new_target < cur_target);
> + ? ? ? }
> +
> + ? ? ? clrsetbits_le32(&power_regs->hw_power_vdddctrl,
> + ? ? ? ? ? ? ? ? ? ? ? POWER_VDDDCTRL_BO_OFFSET_MASK,
> + ? ? ? ? ? ? ? ? ? ? ? new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET);
> +}
> +
> +void mx28_power_init(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + ? ? ? mx28_power_clock2xtal();
> + ? ? ? mx28_power_clear_auto_restart();
> + ? ? ? mx28_power_set_linreg();
> + ? ? ? mx28_power_setup_5v_detect();
> + ? ? ? mx28_power_configure_power_source();
> + ? ? ? mx28_enable_output_rail_protection();
> +
> + ? ? ? mx28_power_set_vddio(3300, 3150);
> +
> + ? ? ? mx28_power_set_vddd(1350, 1200);
> +
> + ? ? ? writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
> + ? ? ? ? ? ? ? POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |
> + ? ? ? ? ? ? ? POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ |
> + ? ? ? ? ? ? ? POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
> +
> + ? ? ? writel(POWER_5VCTRL_PWDN_5VBRNOUT, &power_regs->hw_power_5vctrl_set);
> +
> + ? ? ? early_delay(1000);
> +}
> +
> +void mx28_power_wait_pswitch(void)
> +{
> + ? ? ? struct mx28_power_regs *power_regs =
> + ? ? ? ? ? ? ? (struct mx28_power_regs *)MXS_POWER_BASE;
> +
> + ? ? ? while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK))
> + ? ? ? ? ? ? ? ;
> +}
> diff --git a/mmc_spl/board/denx/m28evk/start.S b/mmc_spl/board/denx/m28evk/start.S
> new file mode 100644
> index 0000000..48c2be6
> --- /dev/null
> +++ b/mmc_spl/board/denx/m28evk/start.S
> @@ -0,0 +1,402 @@
> +/*
> + * ?armboot - Startup Code for ARM926EJS CPU-core
> + *
> + * ?Copyright (c) 2003 ?Texas Instruments
> + *
> + * ?----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
> + *
> + * ?Copyright (c) 2001 Marius Groger <mag@sysgo.de>
> + * ?Copyright (c) 2002 Alex Zupke <azu@sysgo.de>
> + * ?Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
> + * ?Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
> + * ?Copyright (c) 2003 Kshitij <kshitij@ti.com>
> + * ?Copyright (c) 2010 Albert Aribaud <albert.u.boot@aribaud.net>
> + *
> + * Change to support call back into iMX28 bootrom
> + * Copyright (c) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <asm-offsets.h>
> +#include <config.h>
> +#include <common.h>
> +#include <version.h>
> +
> +#if defined(CONFIG_OMAP1610)
> +#include <./configs/omap1510.h>
> +#elif defined(CONFIG_OMAP730)
> +#include <./configs/omap730.h>
> +#endif
> +
> +/*
> + *************************************************************************
> + *
> + * Jump vector table as in table 3.1 in [1]
> + *
> + *************************************************************************
> + */
> +
> +
> +.globl _start
> +_start:
> + ? ? ? b ? ? ? reset
> +#ifdef CONFIG_SPL_BUILD
> +/* No exception handlers in preloader */
> + ? ? ? ldr ? ? pc, _hang
> + ? ? ? ldr ? ? pc, _hang
> + ? ? ? ldr ? ? pc, _hang
> + ? ? ? ldr ? ? pc, _hang
> + ? ? ? b ? ? ? reset
> + ? ? ? ldr ? ? pc, _hang
> + ? ? ? ldr ? ? pc, _hang
> +
> +_hang:
> + ? ? ? .word ? do_hang
> +/* pad to 64 byte boundary */
> + ? ? ? .word ? 0x12345678
> + ? ? ? .word ? 0x12345678
> + ? ? ? .word ? 0x12345678
> + ? ? ? .word ? 0x12345678
> + ? ? ? .word ? 0x12345678
> + ? ? ? .word ? 0x12345678
> + ? ? ? .word ? 0x12345678
> +#else
> + ? ? ? ldr ? ? pc, _undefined_instruction
> + ? ? ? ldr ? ? pc, _software_interrupt
> + ? ? ? ldr ? ? pc, _prefetch_abort
> + ? ? ? ldr ? ? pc, _data_abort
> + ? ? ? ldr ? ? pc, _not_used
> + ? ? ? ldr ? ? pc, _irq
> + ? ? ? ldr ? ? pc, _fiq
> +
> +_undefined_instruction:
> + ? ? ? .word undefined_instruction
> +_software_interrupt:
> + ? ? ? .word software_interrupt
> +_prefetch_abort:
> + ? ? ? .word prefetch_abort
> +_data_abort:
> + ? ? ? .word data_abort
> +_not_used:
> + ? ? ? .word not_used
> +_irq:
> + ? ? ? .word irq
> +_fiq:
> + ? ? ? .word fiq
> +
> +#endif /* CONFIG_SPL_BUILD */
> + ? ? ? .balignl 16,0xdeadbeef
> +
> +
> +/*
> + *************************************************************************
> + *
> + * Startup Code (reset vector)
> + *
> + * do important init only if we don't start from memory!
> + * setup Memory and board specific bits prior to relocation.
> + * relocate armboot to ram
> + * setup stack
> + *
> + *************************************************************************
> + */
> +
> +.globl _TEXT_BASE
> +_TEXT_BASE:
> + ? ? ? .word ? CONFIG_SYS_TEXT_BASE
> +
> +/*
> + * These are defined in the board-specific linker script.
> + * Subtracting _start from them lets the linker put their
> + * relative position in the executable instead of leaving
> + * them null.
> + */
> +.globl _bss_start_ofs
> +_bss_start_ofs:
> + ? ? ? .word __bss_start - _start
> +
> +.globl _bss_end_ofs
> +_bss_end_ofs:
> + ? ? ? .word __bss_end__ - _start
> +
> +.globl _end_ofs
> +_end_ofs:
> + ? ? ? .word _end - _start
> +
> +#ifdef CONFIG_USE_IRQ
> +/* IRQ stack memory (calculated at run-time) */
> +.globl IRQ_STACK_START
> +IRQ_STACK_START:
> + ? ? ? .word ? 0x0badc0de
> +
> +/* IRQ stack memory (calculated at run-time) */
> +.globl FIQ_STACK_START
> +FIQ_STACK_START:
> + ? ? ? .word 0x0badc0de
> +#endif
> +
> +/* IRQ stack memory (calculated at run-time) + 8 bytes */
> +.globl IRQ_STACK_START_IN
> +IRQ_STACK_START_IN:
> + ? ? ? .word ? 0x0badc0de
> +
> +/*
> + * the actual reset code
> + */
> +
> +reset:
> + ? ? ? /*
> + ? ? ? ?* Store all registers on old stack pointer, this will allow us later to
> + ? ? ? ?* return to the BootROM and let the BootROM load U-Boot into RAM.
> + ? ? ? ?*/
> + ? ? ? push ? ?{r0-r12,r14}
> +
> + ? ? ? /*
> + ? ? ? ?* set the cpu to SVC32 mode
> + ? ? ? ?*/
> + ? ? ? mrs ? ? r0,cpsr
> + ? ? ? bic ? ? r0,r0,#0x1f
> + ? ? ? orr ? ? r0,r0,#0xd3
> + ? ? ? msr ? ? cpsr,r0
> +
> + ? ? ? /*
> + ? ? ? ?* we do sys-critical inits only at reboot,
> + ? ? ? ?* not when booting from ram!
> + ? ? ? ?*/
> +#ifndef CONFIG_SKIP_LOWLEVEL_INIT
> + ? ? ? bl ? ? ?cpu_init_crit
> +#endif
> +
> + ? ? ? bl ? ? ?board_init_ll
> +
> + ? ? ? pop ? ? {r0-r12,r14}
> + ? ? ? bx ? ? ?lr
> +
> +/*
> + *************************************************************************
> + *
> + * CPU_init_critical registers
> + *
> + * setup important registers
> + * setup memory timing
> + *
> + *************************************************************************
> + */
> +#ifndef CONFIG_SKIP_LOWLEVEL_INIT
> +cpu_init_crit:
> + ? ? ? /*
> + ? ? ? ?* flush v4 I/D caches
> + ? ? ? ?*/
> + ? ? ? mov ? ? r0, #0
> + ? ? ? mcr ? ? p15, 0, r0, c7, c7, 0 ? /* flush v3/v4 cache */
> + ? ? ? mcr ? ? p15, 0, r0, c8, c7, 0 ? /* flush v4 TLB */
> +
> + ? ? ? /*
> + ? ? ? ?* disable MMU stuff and caches
> + ? ? ? ?*/
> + ? ? ? mrc ? ? p15, 0, r0, c1, c0, 0
> + ? ? ? bic ? ? r0, r0, #0x00002300 ? ? /* clear bits 13, 9:8 (--V- --RS) */
> + ? ? ? bic ? ? r0, r0, #0x00000087 ? ? /* clear bits 7, 2:0 (B--- -CAM) */
> + ? ? ? orr ? ? r0, r0, #0x00000002 ? ? /* set bit 2 (A) Align */
> + ? ? ? orr ? ? r0, r0, #0x00001000 ? ? /* set bit 12 (I) I-Cache */
> + ? ? ? mcr ? ? p15, 0, r0, c1, c0, 0
> +
> + ? ? ? /*
> + ? ? ? ?* Go setup Memory and board specific bits prior to relocation.
> + ? ? ? ?*/
> + ? ? ? mov ? ? ip, lr ? ? ? ? ?/* perserve link reg across call */
> + ? ? ? bl ? ? ?lowlevel_init ? /* go setup pll,mux,memory */
> + ? ? ? mov ? ? lr, ip ? ? ? ? ?/* restore link */
> + ? ? ? mov ? ? pc, lr ? ? ? ? ?/* back to my caller */
> +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
> +
> +#ifndef CONFIG_SPL_BUILD
> +/*
> + *************************************************************************
> + *
> + * Interrupt handling
> + *
> + *************************************************************************
> + */
> +
> +@
> +@ IRQ stack frame.
> +@
> +#define S_FRAME_SIZE ? 72
> +
> +#define S_OLD_R0 ? ? ? 68
> +#define S_PSR ? ? ? ? ?64
> +#define S_PC ? ? ? ? ? 60
> +#define S_LR ? ? ? ? ? 56
> +#define S_SP ? ? ? ? ? 52
> +
> +#define S_IP ? ? ? ? ? 48
> +#define S_FP ? ? ? ? ? 44
> +#define S_R10 ? ? ? ? ?40
> +#define S_R9 ? ? ? ? ? 36
> +#define S_R8 ? ? ? ? ? 32
> +#define S_R7 ? ? ? ? ? 28
> +#define S_R6 ? ? ? ? ? 24
> +#define S_R5 ? ? ? ? ? 20
> +#define S_R4 ? ? ? ? ? 16
> +#define S_R3 ? ? ? ? ? 12
> +#define S_R2 ? ? ? ? ? 8
> +#define S_R1 ? ? ? ? ? 4
> +#define S_R0 ? ? ? ? ? 0
> +
> +#define MODE_SVC 0x13
> +#define I_BIT ? 0x80
> +
> +/*
> + * use bad_save_user_regs for abort/prefetch/undef/swi ...
> + * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
> + */
> +
> + ? ? ? .macro ?bad_save_user_regs
> + ? ? ? @ carve out a frame on current user stack
> + ? ? ? sub ? ? sp, sp, #S_FRAME_SIZE
> + ? ? ? stmia ? sp, {r0 - r12} ?@ Save user registers (now in svc mode) r0-r12
> + ? ? ? ldr ? ? r2, IRQ_STACK_START_IN
> + ? ? ? @ get values for "aborted" pc and cpsr (into parm regs)
> + ? ? ? ldmia ? r2, {r2 - r3}
> + ? ? ? add ? ? r0, sp, #S_FRAME_SIZE ? ? ? ? ? @ grab pointer to old stack
> + ? ? ? add ? ? r5, sp, #S_SP
> + ? ? ? mov ? ? r1, lr
> + ? ? ? stmia ? r5, {r0 - r3} ? @ save sp_SVC, lr_SVC, pc, cpsr
> + ? ? ? mov ? ? r0, sp ? ? ? ? ?@ save current stack into r0 (param register)
> + ? ? ? .endm
> +
> + ? ? ? .macro ?irq_save_user_regs
> + ? ? ? sub ? ? sp, sp, #S_FRAME_SIZE
> + ? ? ? stmia ? sp, {r0 - r12} ? ? ? ? ? ? ? ? ?@ Calling r0-r12
> + ? ? ? @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
> + ? ? ? add ? ? r8, sp, #S_PC
> + ? ? ? stmdb ? r8, {sp, lr}^ ? ? ? ? ? @ Calling SP, LR
> + ? ? ? str ? ? lr, [r8, #0] ? ? ? ? ? ?@ Save calling PC
> + ? ? ? mrs ? ? r6, spsr
> + ? ? ? str ? ? r6, [r8, #4] ? ? ? ? ? ?@ Save CPSR
> + ? ? ? str ? ? r0, [r8, #8] ? ? ? ? ? ?@ Save OLD_R0
> + ? ? ? mov ? ? r0, sp
> + ? ? ? .endm
> +
> + ? ? ? .macro ?irq_restore_user_regs
> + ? ? ? ldmia ? sp, {r0 - lr}^ ? ? ? ? ? ? ? ? ?@ Calling r0 - lr
> + ? ? ? mov ? ? r0, r0
> + ? ? ? ldr ? ? lr, [sp, #S_PC] ? ? ? ? ? ? ? ? @ Get PC
> + ? ? ? add ? ? sp, sp, #S_FRAME_SIZE
> + ? ? ? subs ? ?pc, lr, #4 ? ? ? ? ? ? ?@ return & move spsr_svc into cpsr
> + ? ? ? .endm
> +
> + ? ? ? .macro get_bad_stack
> + ? ? ? ldr ? ? r13, IRQ_STACK_START_IN ? ? ? ? @ setup our mode stack
> +
> + ? ? ? str ? ? lr, [r13] ? ? ? @ save caller lr in position 0 of saved stack
> + ? ? ? mrs ? ? lr, spsr ? ? ? ?@ get the spsr
> + ? ? ? str ? ? lr, [r13, #4] ? @ save spsr in position 1 of saved stack
> + ? ? ? mov ? ? r13, #MODE_SVC ?@ prepare SVC-Mode
> + ? ? ? @ msr ? spsr_c, r13
> + ? ? ? msr ? ? spsr, r13 ? ? ? @ switch modes, make sure moves will execute
> + ? ? ? mov ? ? lr, pc ? ? ? ? ?@ capture return pc
> + ? ? ? movs ? ?pc, lr ? ? ? ? ?@ jump to next instruction & switch modes.
> + ? ? ? .endm
> +
> + ? ? ? .macro get_irq_stack ? ? ? ? ? ? ? ? ? ?@ setup IRQ stack
> + ? ? ? ldr ? ? sp, IRQ_STACK_START
> + ? ? ? .endm
> +
> + ? ? ? .macro get_fiq_stack ? ? ? ? ? ? ? ? ? ?@ setup FIQ stack
> + ? ? ? ldr ? ? sp, FIQ_STACK_START
> + ? ? ? .endm
> +#endif /* CONFIG_SPL_BUILD */
> +
> +/*
> + * exception handlers
> + */
> +#ifdef CONFIG_SPL_BUILD
> + ? ? ? .align ?5
> +do_hang:
> + ? ? ? ldr ? ? sp, _TEXT_BASE ? ? ? ? ? ? ? ? ?/* switch to abort stack */
> +1:
> + ? ? ? bl ? ? ?1b ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?/* hang and never return */
> +#else ?/* !CONFIG_SPL_BUILD */
> + ? ? ? .align ?5
> +undefined_instruction:
> + ? ? ? get_bad_stack
> + ? ? ? bad_save_user_regs
> + ? ? ? bl ? ? ?do_undefined_instruction
> +
> + ? ? ? .align ?5
> +software_interrupt:
> + ? ? ? get_bad_stack
> + ? ? ? bad_save_user_regs
> + ? ? ? bl ? ? ?do_software_interrupt
> +
> + ? ? ? .align ?5
> +prefetch_abort:
> + ? ? ? get_bad_stack
> + ? ? ? bad_save_user_regs
> + ? ? ? bl ? ? ?do_prefetch_abort
> +
> + ? ? ? .align ?5
> +data_abort:
> + ? ? ? get_bad_stack
> + ? ? ? bad_save_user_regs
> + ? ? ? bl ? ? ?do_data_abort
> +
> + ? ? ? .align ?5
> +not_used:
> + ? ? ? get_bad_stack
> + ? ? ? bad_save_user_regs
> + ? ? ? bl ? ? ?do_not_used
> +
> +#ifdef CONFIG_USE_IRQ
> +
> + ? ? ? .align ?5
> +irq:
> + ? ? ? get_irq_stack
> + ? ? ? irq_save_user_regs
> + ? ? ? bl ? ? ?do_irq
> + ? ? ? irq_restore_user_regs
> +
> + ? ? ? .align ?5
> +fiq:
> + ? ? ? get_fiq_stack
> + ? ? ? /* someone ought to write a more effiction fiq_save_user_regs */
> + ? ? ? irq_save_user_regs
> + ? ? ? bl ? ? ?do_fiq
> + ? ? ? irq_restore_user_regs
> +
> +#else
> +
> + ? ? ? .align ?5
> +irq:
> + ? ? ? get_bad_stack
> + ? ? ? bad_save_user_regs
> + ? ? ? bl ? ? ?do_irq
> +
> + ? ? ? .align ?5
> +fiq:
> + ? ? ? get_bad_stack
> + ? ? ? bad_save_user_regs
> + ? ? ? bl ? ? ?do_fiq
> +
> +#endif
> +#endif /* CONFIG_SPL_BUILD */
> diff --git a/mmc_spl/board/denx/m28evk/u-boot.bd b/mmc_spl/board/denx/m28evk/u-boot.bd
> new file mode 100644
> index 0000000..3ddffbc
> --- /dev/null
> +++ b/mmc_spl/board/denx/m28evk/u-boot.bd
> @@ -0,0 +1,14 @@
> +sources {
> + ? ? ? u_boot_spl="mmc_spl/u-boot-spl.bin";
> + ? ? ? u_boot="u-boot.bin";
> +}
> +
> +section (0) {
> + ? ? ? ?load u_boot_spl > 0x0000;
> + ? ? ? ?load ivt (entry = 0x0014) > 0x8000;
> + ? ? ? hab call 0x8000;
> +
> + ? ? ? ?load u_boot > 0x40000100;
> + ? ? ? ?load ivt (entry = 0x40000100) > 0x8000;
> + ? ? ? hab call 0x8000;
> +}
> diff --git a/mmc_spl/board/denx/m28evk/u-boot.lds b/mmc_spl/board/denx/m28evk/u-boot.lds
> new file mode 100644
> index 0000000..f491bb5
> --- /dev/null
> +++ b/mmc_spl/board/denx/m28evk/u-boot.lds
> @@ -0,0 +1,87 @@
> +/*
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * January 2004 - Changed to support H4 device
> + * Copyright (c) 2004-2008 Texas Instruments
> + *
> + * (C) Copyright 2002
> + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
> +OUTPUT_ARCH(arm)
> +ENTRY(_start)
> +SECTIONS
> +{
> + ? ? ? . = 0x00000000;
> +
> + ? ? ? . = ALIGN(4);
> + ? ? ? .text ? :
> + ? ? ? {
> + ? ? ? ? ? ? ? start.o (.text)
> + ? ? ? ? ? ? ? *(.text)
> + ? ? ? }
> +
> + ? ? ? . = ALIGN(4);
> + ? ? ? .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
> +
> + ? ? ? . = ALIGN(4);
> + ? ? ? .data : {
> + ? ? ? ? ? ? ? *(.data)
> + ? ? ? }
> +
> + ? ? ? . = ALIGN(4);
> + ? ? ? __u_boot_cmd_start = .;
> + ? ? ? .u_boot_cmd : { *(.u_boot_cmd) }
> + ? ? ? __u_boot_cmd_end = .;
> +
> + ? ? ? . = ALIGN(4);
> +
> + ? ? ? .rel.dyn : {
> + ? ? ? ? ? ? ? __rel_dyn_start = .;
> + ? ? ? ? ? ? ? *(.rel*)
> + ? ? ? ? ? ? ? __rel_dyn_end = .;
> + ? ? ? }
> +
> + ? ? ? .dynsym : {
> + ? ? ? ? ? ? ? __dynsym_start = .;
> + ? ? ? ? ? ? ? *(.dynsym)
> + ? ? ? }
> +
> + ? ? ? _end = .;
> +
> + ? ? ? .bss __rel_dyn_start (OVERLAY) : {
> + ? ? ? ? ? ? ? __bss_start = .;
> + ? ? ? ? ? ? ? *(.bss)
> + ? ? ? ? ? ? ? ?. = ALIGN(4);
> + ? ? ? ? ? ? ? __bss_end__ = .;
> + ? ? ? }
> +
> + ? ? ? /DISCARD/ : { *(.bss*) }
> + ? ? ? /DISCARD/ : { *(.dynstr*) }
> + ? ? ? /DISCARD/ : { *(.dynsym*) }
> + ? ? ? /DISCARD/ : { *(.dynamic*) }
> + ? ? ? /DISCARD/ : { *(.hash*) }
> + ? ? ? /DISCARD/ : { *(.plt*) }
> + ? ? ? /DISCARD/ : { *(.interp*) }
> + ? ? ? /DISCARD/ : { *(.gnu*) }
> +}
> --
> 1.7.5.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
with warm regards,
Chander Kashyap
^ permalink raw reply [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL
2011-09-09 5:44 ` Chander Kashyap
@ 2011-09-09 7:33 ` Wolfgang Denk
0 siblings, 0 replies; 68+ messages in thread
From: Wolfgang Denk @ 2011-09-09 7:33 UTC (permalink / raw)
To: u-boot
Dear Chander Kashyap,
In message <CANuQgHE26ewWMXqW=wwhRy6J8n3bzmvKKRVCnm_Y+79x3oKVfw@mail.gmail.com> you wrote:
> Dear Marek Vasut,
> Please use newly added spl framework to add mmc spl support.
Please STOP top posting / full quoting!!!
Please read http://www.netmeister.org/news/learn2quote.html
It makes _zero_ sense to quote 2500 lines just for your single line
remark.
And please always send plain text only; never use HTML.
Thanks.
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Always leave room to add an explanation if it doesn't work out.
^ permalink raw reply [flat|nested] 68+ messages in thread
[parent not found: <CANuQgHH_p-_HRf_jBKiPZz=br0+aCyWROWzHDZgV47xWg97aiQ@mail.gmail.com>]
* [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL
[not found] ` <CANuQgHH_p-_HRf_jBKiPZz=br0+aCyWROWzHDZgV47xWg97aiQ@mail.gmail.com>
@ 2011-09-09 12:49 ` Marek Vasut
2011-09-09 13:14 ` Chander Kashyap
0 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-09 12:49 UTC (permalink / raw)
To: u-boot
On Friday, September 09, 2011 07:02:24 AM Chander Kashyap wrote:
> Dear Marek Vasut,
> Please use newly added spl framework to add mmc spl support.
>
Hi,
if you could possibly elaborate more on this matter, I'd be grateful. Especially
how am I supposed to convert it to new SPL framework. I don't see many examples,
only an empty directory.
Cheers
^ permalink raw reply [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL
2011-09-09 12:49 ` Marek Vasut
@ 2011-09-09 13:14 ` Chander Kashyap
2011-09-10 20:58 ` Marek Vasut
0 siblings, 1 reply; 68+ messages in thread
From: Chander Kashyap @ 2011-09-09 13:14 UTC (permalink / raw)
To: u-boot
2011/9/9 Marek Vasut <marek.vasut@gmail.com>:
> On Friday, September 09, 2011 07:02:24 AM Chander Kashyap wrote:
>> Dear Marek Vasut,
>> Please use newly added spl framework to add mmc spl support.
>>
>
> Hi,
>
> if you could possibly elaborate more on this matter, I'd be grateful. Especially
> how am I supposed to convert it to new SPL framework. I don't see many examples,
> only an empty directory.
Please see the implementation of origen board(board/samsung/origen).
Its newly added.
May be you can move mmc_spl/board/denx/m28evk/* to board/denx/m28evk/*
define CONFIG_SPL_LDSCRIPT to the ldscript you want to use (Please
read spl/Makefile line 64 onward).
>
> Cheers
>
--
with warm regards,
Chander Kashyap
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL
2011-09-09 13:14 ` Chander Kashyap
@ 2011-09-10 20:58 ` Marek Vasut
2011-09-10 21:04 ` Marek Vasut
0 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-10 20:58 UTC (permalink / raw)
To: u-boot
On Friday, September 09, 2011 03:14:06 PM Chander Kashyap wrote:
> 2011/9/9 Marek Vasut <marek.vasut@gmail.com>:
> > On Friday, September 09, 2011 07:02:24 AM Chander Kashyap wrote:
> >> Dear Marek Vasut,
> >> Please use newly added spl framework to add mmc spl support.
> >
> > Hi,
> >
> > if you could possibly elaborate more on this matter, I'd be grateful.
> > Especially how am I supposed to convert it to new SPL framework. I don't
> > see many examples, only an empty directory.
>
> Please see the implementation of origen board(board/samsung/origen).
> Its newly added.
> May be you can move mmc_spl/board/denx/m28evk/* to board/denx/m28evk/*
> define CONFIG_SPL_LDSCRIPT to the ldscript you want to use (Please
> read spl/Makefile line 64 onward).
Ok, I went through it (partly). Why do you create executables with .exe suffix
there ? Is that some kind of a new trend in embedded linux industry?
>
> > Cheers
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL
2011-09-10 20:58 ` Marek Vasut
@ 2011-09-10 21:04 ` Marek Vasut
0 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-10 21:04 UTC (permalink / raw)
To: u-boot
On Saturday, September 10, 2011 10:58:48 PM Marek Vasut wrote:
> On Friday, September 09, 2011 03:14:06 PM Chander Kashyap wrote:
> > 2011/9/9 Marek Vasut <marek.vasut@gmail.com>:
> > > On Friday, September 09, 2011 07:02:24 AM Chander Kashyap wrote:
> > >> Dear Marek Vasut,
> > >> Please use newly added spl framework to add mmc spl support.
> > >
> > > Hi,
> > >
> > > if you could possibly elaborate more on this matter, I'd be grateful.
> > > Especially how am I supposed to convert it to new SPL framework. I
> > > don't see many examples, only an empty directory.
> >
> > Please see the implementation of origen board(board/samsung/origen).
> > Its newly added.
> > May be you can move mmc_spl/board/denx/m28evk/* to board/denx/m28evk/*
> > define CONFIG_SPL_LDSCRIPT to the ldscript you want to use (Please
> > read spl/Makefile line 64 onward).
>
> Ok, I went through it (partly). Why do you create executables with .exe
> suffix there ? Is that some kind of a new trend in embedded linux
> industry?
Oh, one more thing -- is it possible to use custom start.S with the new "spl
framework"? I somehow need it.
Thanks!
>
> > > Cheers
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 15/31] M28: Enable MMC SPL
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (13 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 14/31] iMX28: Add MMC SPL Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 16/31] iMX28: Add GPIO control Marek Vasut
` (15 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
include/configs/m28evk.h | 11 +++++++++--
1 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 7e664fc..edacf3d 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -69,8 +69,14 @@
#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */
#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR 0x18000
-#define CONFIG_SYS_TEXT_BASE 0x40000000
+/* Point initial SP in SRAM so SPL can use it too. */
+#define CONFIG_SYS_INIT_SP_ADDR 0x00002000
+/*
+ * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
+ * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
+ * binary. In case there was more of this mess, 0x100 bytes are skipped.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x40000100
/*
* U-Boot general configurations
@@ -107,6 +113,7 @@
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_MXS_MMC
+#define CONFIG_MMC_U_BOOT
#endif
/*
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 16/31] iMX28: Add GPIO control
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (14 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 15/31] M28: Enable " Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-09 8:46 ` Stefano Babic
2011-09-08 20:42 ` [U-Boot] [PATCH 17/31] M28: Enable use of GPIO configurators Marek Vasut
` (14 subsequent siblings)
30 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
arch/arm/cpu/arm926ejs/mx28/Makefile | 2 +-
arch/arm/cpu/arm926ejs/mx28/gpio.c | 108 +++++++++++++++++++++++++++++++++
arch/arm/cpu/arm926ejs/mx28/mx28.c | 10 +++
arch/arm/include/asm/arch-mx28/gpio.h | 32 ++++++++++
4 files changed, 151 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/mx28/gpio.c
create mode 100644 arch/arm/include/asm/arch-mx28/gpio.h
diff --git a/arch/arm/cpu/arm926ejs/mx28/Makefile b/arch/arm/cpu/arm926ejs/mx28/Makefile
index 7845310..e3f0a12 100644
--- a/arch/arm/cpu/arm926ejs/mx28/Makefile
+++ b/arch/arm/cpu/arm926ejs/mx28/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS = clock.o mx28.o iomux.o timer.o
+COBJS = clock.o mx28.o gpio.o iomux.o timer.o
SRCS := $(START:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/arch/arm/cpu/arm926ejs/mx28/gpio.c b/arch/arm/cpu/arm926ejs/mx28/gpio.c
new file mode 100644
index 0000000..00d2cca
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx28/gpio.c
@@ -0,0 +1,108 @@
+/*
+ * Freescale i.MX28 GPIO control code
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/iomux.h>
+
+#if defined(CONFIG_MX23)
+#define PINCTRL_BANKS 3
+#define PINCTRL_DOUT(n) (0x0500 + ((n) * 0x10))
+#define PINCTRL_DIN(n) (0x0600 + ((n) * 0x10))
+#define PINCTRL_DOE(n) (0x0700 + ((n) * 0x10))
+#define PINCTRL_PIN2IRQ(n) (0x0800 + ((n) * 0x10))
+#define PINCTRL_IRQEN(n) (0x0900 + ((n) * 0x10))
+#define PINCTRL_IRQSTAT(n) (0x0c00 + ((n) * 0x10))
+#elif defined(CONFIG_MX28)
+#define PINCTRL_BANKS 5
+#define PINCTRL_DOUT(n) (0x0700 + ((n) * 0x10))
+#define PINCTRL_DIN(n) (0x0900 + ((n) * 0x10))
+#define PINCTRL_DOE(n) (0x0b00 + ((n) * 0x10))
+#define PINCTRL_PIN2IRQ(n) (0x1000 + ((n) * 0x10))
+#define PINCTRL_IRQEN(n) (0x1100 + ((n) * 0x10))
+#define PINCTRL_IRQSTAT(n) (0x1400 + ((n) * 0x10))
+#else
+#error "Please select CONFIG_MX23 or CONFIG_MX28"
+#endif
+
+#define GPIO_INT_FALL_EDGE 0x0
+#define GPIO_INT_LOW_LEV 0x1
+#define GPIO_INT_RISE_EDGE 0x2
+#define GPIO_INT_HIGH_LEV 0x3
+#define GPIO_INT_LEV_MASK (1 << 0)
+#define GPIO_INT_POL_MASK (1 << 1)
+
+void mxs_gpio_direction(iomux_cfg_t pad, int output)
+{
+ uint32_t bank = PAD_BANK(pad);
+ uint32_t offset = PINCTRL_DOE(bank);
+ struct mx28_register *reg =
+ (struct mx28_register *)(MXS_PINCTRL_BASE + offset);
+
+ if (output)
+ writel(1 << PAD_PIN(pad), ®->reg_set);
+ else
+ writel(1 << PAD_PIN(pad), ®->reg_clr);
+}
+
+int mxs_gpio_get(iomux_cfg_t pad)
+{
+ uint32_t bank = PAD_BANK(pad);
+ uint32_t offset = PINCTRL_DIN(bank);
+ struct mx28_register *reg =
+ (struct mx28_register *)(MXS_PINCTRL_BASE + offset);
+
+ return (readl(®->reg) >> PAD_PIN(pad)) & 1;
+}
+
+void mxs_gpio_set(iomux_cfg_t pad, int value)
+{
+ uint32_t bank = PAD_BANK(pad);
+ uint32_t offset = PINCTRL_DOUT(bank);
+ struct mx28_register *reg =
+ (struct mx28_register *)(MXS_PINCTRL_BASE + offset);
+
+ if (value)
+ writel(1 << PAD_PIN(pad), ®->reg_set);
+ else
+ writel(1 << PAD_PIN(pad), ®->reg_clr);
+}
+
+void mxs_gpio_init(void)
+{
+ int i;
+
+ for (i = 0; i < PINCTRL_BANKS; i++) {
+ writel(0, MXS_PINCTRL_BASE + PINCTRL_PIN2IRQ(i));
+ writel(0, MXS_PINCTRL_BASE + PINCTRL_IRQEN(i));
+ /* Use SCT address here to clear the IRQSTAT bits */
+ writel(0xffffffff, MXS_PINCTRL_BASE + PINCTRL_IRQSTAT(i) + 8);
+ }
+}
diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c
index dca54d2..68f0da3 100644
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -30,6 +30,8 @@
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/gpio.h>
#include <asm/arch/regs-common.h>
#include <asm/arch/regs-base.h>
#include <asm/arch/regs-clkctrl.h>
@@ -118,6 +120,14 @@ int mx28_reset_block(struct mx28_register *reg)
return 0;
}
+#ifdef CONFIG_ARCH_CPU_INIT
+int arch_cpu_init(void)
+{
+ mxs_gpio_init();
+ return 0;
+}
+#endif
+
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
diff --git a/arch/arm/include/asm/arch-mx28/gpio.h b/arch/arm/include/asm/arch-mx28/gpio.h
new file mode 100644
index 0000000..9435538
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/gpio.h
@@ -0,0 +1,32 @@
+/*
+ * Freescale i.MX28 GPIO
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __GPIO_H__
+#define __GPIO_H__
+
+void mxs_gpio_set(iomux_cfg_t pad, int value);
+int mxs_gpio_get(iomux_cfg_t pad);
+void mxs_gpio_direction(iomux_cfg_t pad, int output);
+
+void mxs_gpio_init(void);
+
+#endif /* __GPIO_H__ */
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 16/31] iMX28: Add GPIO control
2011-09-08 20:42 ` [U-Boot] [PATCH 16/31] iMX28: Add GPIO control Marek Vasut
@ 2011-09-09 8:46 ` Stefano Babic
0 siblings, 0 replies; 68+ messages in thread
From: Stefano Babic @ 2011-09-09 8:46 UTC (permalink / raw)
To: u-boot
On 09/08/2011 10:42 PM, Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>
> ---
> arch/arm/cpu/arm926ejs/mx28/Makefile | 2 +-
> arch/arm/cpu/arm926ejs/mx28/gpio.c | 108 +++++++++++++++++++++++++++++++++
> arch/arm/cpu/arm926ejs/mx28/mx28.c | 10 +++
> arch/arm/include/asm/arch-mx28/gpio.h | 32 ++++++++++
> 4 files changed, 151 insertions(+), 1 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/mx28/gpio.c
> create mode 100644 arch/arm/include/asm/arch-mx28/gpio.h
>
> diff --git a/arch/arm/cpu/arm926ejs/mx28/Makefile b/arch/arm/cpu/arm926ejs/mx28/Makefile
> index 7845310..e3f0a12 100644
> --- a/arch/arm/cpu/arm926ejs/mx28/Makefile
> +++ b/arch/arm/cpu/arm926ejs/mx28/Makefile
> @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
>
> LIB = $(obj)lib$(SOC).o
>
> -COBJS = clock.o mx28.o iomux.o timer.o
> +COBJS = clock.o mx28.o gpio.o iomux.o timer.o
>
> SRCS := $(START:.o=.S) $(COBJS:.o=.c)
> OBJS := $(addprefix $(obj),$(COBJS))
> diff --git a/arch/arm/cpu/arm926ejs/mx28/gpio.c b/arch/arm/cpu/arm926ejs/mx28/gpio.c
No. All drivers go into the drivers directory (we try to follow the
Linux's rule..).
See drivers/gpio/.
As name, I suggest you steal the name from kernel (mxs_gpio.c seems to
me appropriate).
As remark: in the kernel, the structure for this SOC are identified by
the prefix mxs. This is valid for both MX28 and MX23. I want only to
point out how it is done in the kernel, I know we have not (yet) support
for MX23 in u-boot. Any chance to uniform names with the kernel ?
> new file mode 100644
> index 0000000..00d2cca
> --- /dev/null
> +++ b/arch/arm/cpu/arm926ejs/mx28/gpio.c
> @@ -0,0 +1,108 @@
> +/*
> + * Freescale i.MX28 GPIO control code
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <netdev.h>
> +#include <asm/errno.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/regs-common.h>
> +#include <asm/arch/regs-base.h>
> +#include <asm/arch/iomux.h>
> +
> +#if defined(CONFIG_MX23)
Ok. So you *want* to add support for MX23, too. Thanks for doing that !
Then probably the name "mxs" is not very far to be used....
> +#define PINCTRL_BANKS 3
> +#define PINCTRL_DOUT(n) (0x0500 + ((n) * 0x10))
> +#define PINCTRL_DIN(n) (0x0600 + ((n) * 0x10))
> +#define PINCTRL_DOE(n) (0x0700 + ((n) * 0x10))
> +#define PINCTRL_PIN2IRQ(n) (0x0800 + ((n) * 0x10))
> +#define PINCTRL_IRQEN(n) (0x0900 + ((n) * 0x10))
> +#define PINCTRL_IRQSTAT(n) (0x0c00 + ((n) * 0x10))
No structures for that ?
> +void mxs_gpio_direction(iomux_cfg_t pad, int output)
> +{
This is not correct. Blackfin addes as first a common way to use gpio,
and we try to uniform the other SOC to the same rule. We should have not
special SOC_something_gpio_function.
The interface is in asm/asm/gpio.h. Each SOC must implement (you can
check on other i.MX SOCs) only those functions:
int gpio_request(int gp, const char *label);
void gpio_free(int gp);
void gpio_toggle_value(int gp);
int gpio_direction_input(int gp);
int gpio_direction_output(int gp, int value);
int gpio_get_value(int gp);
void gpio_set_value(int gp, int value);
This is the common interface - special definition for each SOC can be
put into asm/arch/gpio.h
> +void mxs_gpio_init(void)
> +{
> + int i;
> +
> + for (i = 0; i < PINCTRL_BANKS; i++) {
> + writel(0, MXS_PINCTRL_BASE + PINCTRL_PIN2IRQ(i));
> + writel(0, MXS_PINCTRL_BASE + PINCTRL_IRQEN(i));
> + /* Use SCT address here to clear the IRQSTAT bits */
> + writel(0xffffffff, MXS_PINCTRL_BASE + PINCTRL_IRQSTAT(i) + 8);
> + }
I am not sure this stuff should be done here. It should be
responsibility of the board maintainer to execute it - not only, to
decide how to set up the pinmux at all.
> diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c
> index dca54d2..68f0da3 100644
> --- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
> +++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
> @@ -30,6 +30,8 @@
> #include <asm/errno.h>
> #include <asm/io.h>
> #include <asm/arch/clock.h>
> +#include <asm/arch/iomux.h>
> +#include <asm/arch/gpio.h>
> #include <asm/arch/regs-common.h>
> #include <asm/arch/regs-base.h>
> #include <asm/arch/regs-clkctrl.h>
> @@ -118,6 +120,14 @@ int mx28_reset_block(struct mx28_register *reg)
> return 0;
> }
>
> +#ifdef CONFIG_ARCH_CPU_INIT
> +int arch_cpu_init(void)
> +{
> + mxs_gpio_init();
> + return 0;
> +}
Please squash your patches - I am already confused after a few patches.
> +#endif
> +
> #if defined(CONFIG_DISPLAY_CPUINFO)
> int print_cpuinfo(void)
> {
> diff --git a/arch/arm/include/asm/arch-mx28/gpio.h b/arch/arm/include/asm/arch-mx28/gpio.h
> new file mode 100644
> index 0000000..9435538
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-mx28/gpio.h
> @@ -0,0 +1,32 @@
> +/*
> + * Freescale i.MX28 GPIO
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + */
> +
> +#ifndef __GPIO_H__
> +#define __GPIO_H__
> +
> +void mxs_gpio_set(iomux_cfg_t pad, int value);
> +int mxs_gpio_get(iomux_cfg_t pad);
> +void mxs_gpio_direction(iomux_cfg_t pad, int output);
No. This file should be dropped, it is not required.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 17/31] M28: Enable use of GPIO configurators
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (15 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 16/31] iMX28: Add GPIO control Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 18/31] iMX28: Add SPI driver Marek Vasut
` (13 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
include/configs/m28evk.h | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index edacf3d..b48fdd4 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -35,6 +35,7 @@
#define CONFIG_SYS_ICACHE_OFF
#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ARCH_CPU_INIT
/*
* U-Boot Commands
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 18/31] iMX28: Add SPI driver
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (16 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 17/31] M28: Enable use of GPIO configurators Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-09 8:51 ` Stefano Babic
2011-09-08 20:42 ` [U-Boot] [PATCH 19/31] M28EVK: Enable SPI and SPI flash Marek Vasut
` (12 subsequent siblings)
30 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
drivers/spi/Makefile | 1 +
drivers/spi/mxs_spi.c | 174 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 175 insertions(+), 0 deletions(-)
create mode 100644 drivers/spi/mxs_spi.c
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 96c9642..9a0c475 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -36,6 +36,7 @@ COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o
COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
+COBJS-$(CONFIG_MXS_SPI) += mxs_spi.o
COBJS-$(CONFIG_OC_TINY_SPI) += oc_tiny_spi.o
COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o
COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
new file mode 100644
index 0000000..b9c2f06
--- /dev/null
+++ b/drivers/spi/mxs_spi.c
@@ -0,0 +1,174 @@
+/*
+ * Freescale i.MX28 SPI driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/regs-ssp.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mx28.h>
+
+#define MXS_SPI_MAX_TIMEOUT 1000000
+
+static inline struct mx28_ssp_regs *to_mxs_regs(struct spi_slave *slave)
+{
+ return (struct mx28_ssp_regs *)(MXS_SSP0_BASE + (slave->bus * 0x2000));
+}
+
+void spi_init(void)
+{
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct spi_slave *slave;
+ struct mx28_ssp_regs *ssp_regs;
+ uint32_t reg = 0;
+
+ if (bus > 3) {
+ printf("MXS SPI: Max bus number is 3\n");
+ return NULL;
+ }
+
+ slave = malloc(sizeof(struct spi_slave));
+ if (!slave)
+ return NULL;
+
+ slave->bus = bus;
+ slave->cs = cs;
+
+ ssp_regs = to_mxs_regs(slave);
+
+ mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
+
+ writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT, &ssp_regs->hw_ssp_ctrl0);
+
+ reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS;
+ reg |= (mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0;
+ reg |= (mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0;
+ writel(reg, &ssp_regs->hw_ssp_ctrl1);
+
+ writel(0, &ssp_regs->hw_ssp_cmd0);
+
+ mx28_set_ssp_busclock(bus, max_hz / 1000);
+
+ return slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ free(slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+}
+
+void mxs_spi_start_xfer(struct spi_slave *slave)
+{
+ struct mx28_ssp_regs *ssp_regs = to_mxs_regs(slave);
+ writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_set);
+ writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_clr);
+}
+
+void mxs_spi_end_xfer(struct spi_slave *slave)
+{
+ struct mx28_ssp_regs *ssp_regs = to_mxs_regs(slave);
+ writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_clr);
+ writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_set);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct mx28_ssp_regs *ssp_regs = to_mxs_regs(slave);
+ int len = bitlen / 8;
+ const char *tx = dout;
+ char *rx = din;
+
+ if (bitlen == 0)
+ return 0;
+
+ if (!rx && !tx)
+ return 0;
+
+ if (flags & SPI_XFER_BEGIN)
+ mxs_spi_start_xfer(slave);
+
+ while (len--) {
+ /* We transfer 1 byte */
+ writel(1, &ssp_regs->hw_ssp_xfer_size);
+
+ if ((flags & SPI_XFER_END) && !len)
+ mxs_spi_end_xfer(slave);
+
+ if (tx)
+ writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_clr);
+ else
+ writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_set);
+
+ writel(SSP_CTRL0_RUN, &ssp_regs->hw_ssp_ctrl0_set);
+
+ if (mx28_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg,
+ SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
+ printf("MXS SPI: Timeout waiting for start\n");
+ return -1;
+ }
+
+ if (tx)
+ writel(*tx++, &ssp_regs->hw_ssp_data);
+
+ writel(SSP_CTRL0_DATA_XFER, &ssp_regs->hw_ssp_ctrl0_set);
+
+ if (rx) {
+ if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_status_reg,
+ SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) {
+ printf("MXS SPI: Timeout waiting for data\n");
+ return -1;
+ }
+
+ *rx = readl(&ssp_regs->hw_ssp_data);
+ rx++;
+ }
+
+ if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg,
+ SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
+ printf("MXS SPI: Timeout waiting for finish\n");
+ return -1;
+ }
+ }
+
+ return 0;
+}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 18/31] iMX28: Add SPI driver
2011-09-08 20:42 ` [U-Boot] [PATCH 18/31] iMX28: Add SPI driver Marek Vasut
@ 2011-09-09 8:51 ` Stefano Babic
2011-09-09 11:50 ` Marek Vasut
0 siblings, 1 reply; 68+ messages in thread
From: Stefano Babic @ 2011-09-09 8:51 UTC (permalink / raw)
To: u-boot
On 09/08/2011 10:42 PM, Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>
> ---
> drivers/spi/Makefile | 1 +
> drivers/spi/mxs_spi.c | 174 +++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 175 insertions(+), 0 deletions(-)
> create mode 100644 drivers/spi/mxs_spi.c
> diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
> new file mode 100644
> index 0000000..b9c2f06
> --- /dev/null
> +++ b/drivers/spi/mxs_spi.c
Ok - now I am sure and I agree with your choice. Please then use mxs
consequently in all files.
> @@ -0,0 +1,174 @@
> +/*
> + * Freescale i.MX28 SPI driver
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <malloc.h>
> +#include <spi.h>
> +#include <asm/errno.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/regs-common.h>
> +#include <asm/arch/regs-base.h>
> +#include <asm/arch/regs-clkctrl.h>
> +#include <asm/arch/regs-ssp.h>
> +#include <asm/arch/iomux-mx28.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/arch/mx28.h>
General comment: drop this stuff and include only imx-regs.h
> +
> +#define MXS_SPI_MAX_TIMEOUT 1000000
> +
> +static inline struct mx28_ssp_regs *to_mxs_regs(struct spi_slave *slave)
> +{
> + return (struct mx28_ssp_regs *)(MXS_SSP0_BASE + (slave->bus * 0x2000));
> +}
> +
> +void spi_init(void)
> +{
> +}
> +
> +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
> + unsigned int max_hz, unsigned int mode)
> +{
Only the CS supplied in the SOC are supported, it is not possible to use
a GPIO. Please add a comment to explain that.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 18/31] iMX28: Add SPI driver
2011-09-09 8:51 ` Stefano Babic
@ 2011-09-09 11:50 ` Marek Vasut
2011-09-09 12:34 ` Stefano Babic
0 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-09 11:50 UTC (permalink / raw)
To: u-boot
On Friday, September 09, 2011 10:51:17 AM Stefano Babic wrote:
> On 09/08/2011 10:42 PM, Marek Vasut wrote:
> > Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> > Cc: Stefano Babic <sbabic@denx.de>
> > Cc: Wolfgang Denk <wd@denx.de>
> > Cc: Detlev Zundel <dzu@denx.de>
> > ---
> >
> > drivers/spi/Makefile | 1 +
> > drivers/spi/mxs_spi.c | 174
> > +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 175
> > insertions(+), 0 deletions(-)
> > create mode 100644 drivers/spi/mxs_spi.c
> >
> > diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
> > new file mode 100644
> > index 0000000..b9c2f06
> > --- /dev/null
> > +++ b/drivers/spi/mxs_spi.c
>
> Ok - now I am sure and I agree with your choice. Please then use mxs
> consequently in all files.
>
> > @@ -0,0 +1,174 @@
> > +/*
> > + * Freescale i.MX28 SPI driver
> > + *
> > + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> > + * on behalf of DENX Software Engineering GmbH
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 of
> > + * the License, or (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> > + * MA 02111-1307 USA
> > + */
> > +
> > +#include <common.h>
> > +#include <malloc.h>
> > +#include <spi.h>
> > +#include <asm/errno.h>
> > +#include <asm/io.h>
> > +#include <asm/arch/clock.h>
> > +#include <asm/arch/regs-common.h>
> > +#include <asm/arch/regs-base.h>
> > +#include <asm/arch/regs-clkctrl.h>
> > +#include <asm/arch/regs-ssp.h>
> > +#include <asm/arch/iomux-mx28.h>
> > +#include <asm/arch/gpio.h>
> > +#include <asm/arch/mx28.h>
>
> General comment: drop this stuff and include only imx-regs.h
>
> > +
> > +#define MXS_SPI_MAX_TIMEOUT 1000000
> > +
> > +static inline struct mx28_ssp_regs *to_mxs_regs(struct spi_slave *slave)
> > +{
> > + return (struct mx28_ssp_regs *)(MXS_SSP0_BASE + (slave->bus * 0x2000));
> > +}
> > +
> > +void spi_init(void)
> > +{
> > +}
> > +
> > +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
> > + unsigned int max_hz, unsigned int mode)
> > +{
>
> Only the CS supplied in the SOC are supported, it is not possible to use
> a GPIO. Please add a comment to explain that.
I don't think I understand here.
>
> Best regards,
> Stefano Babic
^ permalink raw reply [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 18/31] iMX28: Add SPI driver
2011-09-09 11:50 ` Marek Vasut
@ 2011-09-09 12:34 ` Stefano Babic
2011-09-09 12:50 ` Marek Vasut
0 siblings, 1 reply; 68+ messages in thread
From: Stefano Babic @ 2011-09-09 12:34 UTC (permalink / raw)
To: u-boot
On 09/09/2011 01:50 PM, Marek Vasut wrote:
>>
>> Only the CS supplied in the SOC are supported, it is not possible to use
>> a GPIO. Please add a comment to explain that.
If you see other SPI drivers (mxc_spi.c, or blackfin, and other, too)
the CS is or can be implemented with a gpio. Some architecture have a
board specific spi_cs_activate.
In your driver, only the CS of the SPI controller are supported. My only
remark is if we can add a comment to explain this.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 18/31] iMX28: Add SPI driver
2011-09-09 12:34 ` Stefano Babic
@ 2011-09-09 12:50 ` Marek Vasut
0 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-09 12:50 UTC (permalink / raw)
To: u-boot
On Friday, September 09, 2011 02:34:05 PM Stefano Babic wrote:
> On 09/09/2011 01:50 PM, Marek Vasut wrote:
> >> Only the CS supplied in the SOC are supported, it is not possible to use
> >> a GPIO. Please add a comment to explain that.
>
> If you see other SPI drivers (mxc_spi.c, or blackfin, and other, too)
> the CS is or can be implemented with a gpio. Some architecture have a
> board specific spi_cs_activate.
>
> In your driver, only the CS of the SPI controller are supported. My only
> remark is if we can add a comment to explain this.
>
Done,cheers
> Best regards,
> Stefano Babic
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 19/31] M28EVK: Enable SPI and SPI flash
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (17 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 18/31] iMX28: Add SPI driver Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 20/31] iMX28: Add APBH DMA driver Marek Vasut
` (11 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
include/configs/m28evk.h | 27 +++++++++++++++++++++++++++
1 files changed, 27 insertions(+), 0 deletions(-)
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index b48fdd4..dee276c 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -57,6 +57,8 @@
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
/*
* Memory configurations
@@ -157,6 +159,31 @@
#endif
/*
+ * SPI
+ */
+#ifdef CONFIG_CMD_SPI
+#define CONFIG_HARD_SPI
+#define CONFIG_MXS_SPI
+#define CONFIG_SPI_HALF_DUPLEX
+#define CONFIG_DEFAULT_SPI_BUS 2
+#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
+
+/* SPI FLASH */
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_CS 2
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 24000000
+
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_BUS 2
+#define CONFIG_ENV_SPI_MAX_HZ 24000000
+#define CONFIG_ENV_SPI_MODE SPI_MODE_0
+#endif
+#endif
+
+/*
* Boot Linux
*/
#define CONFIG_CMDLINE_TAG
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 20/31] iMX28: Add APBH DMA driver
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (18 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 19/31] M28EVK: Enable SPI and SPI flash Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 21/31] iMX28: Add BCH and GPMI register definitions Marek Vasut
` (10 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
arch/arm/include/asm/arch-mx28/dma.h | 170 +++++++
arch/arm/include/asm/arch-mx28/regs-apbh.h | 462 ++++++++++++++++++
drivers/dma/Makefile | 1 +
drivers/dma/apbh_dma.c | 693 ++++++++++++++++++++++++++++
4 files changed, 1326 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/asm/arch-mx28/dma.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-apbh.h
create mode 100644 drivers/dma/apbh_dma.c
diff --git a/arch/arm/include/asm/arch-mx28/dma.h b/arch/arm/include/asm/arch-mx28/dma.h
new file mode 100644
index 0000000..7061e7c
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/dma.h
@@ -0,0 +1,170 @@
+/*
+ * Freescale i.MX28 APBH DMA
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __DMA_H__
+#define __DMA_H__
+
+#include <linux/list.h>
+
+#ifndef CONFIG_ARCH_DMA_PIO_WORDS
+#define DMA_PIO_WORDS 15
+#else
+#define DMA_PIO_WORDS CONFIG_ARCH_DMA_PIO_WORDS
+#endif
+
+#define MXS_DMA_ALIGNMENT 32
+
+/*
+ * MXS DMA channels
+ */
+enum {
+ MXS_DMA_CHANNEL_AHB_APBH_SSP0 = 0,
+ MXS_DMA_CHANNEL_AHB_APBH_SSP1,
+ MXS_DMA_CHANNEL_AHB_APBH_SSP2,
+ MXS_DMA_CHANNEL_AHB_APBH_SSP3,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI0,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI1,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI2,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI3,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI4,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI5,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI6,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI7,
+ MXS_DMA_CHANNEL_AHB_APBH_SSP,
+ MXS_MAX_DMA_CHANNELS,
+};
+
+/*
+ * MXS DMA hardware command.
+ *
+ * This structure describes the in-memory layout of an entire DMA command,
+ * including space for the maximum number of PIO accesses. See the appropriate
+ * reference manual for a detailed description of what these fields mean to the
+ * DMA hardware.
+ */
+#define MXS_DMA_DESC_COMMAND_MASK 0x3
+#define MXS_DMA_DESC_COMMAND_OFFSET 0
+#define MXS_DMA_DESC_COMMAND_NO_DMAXFER 0x0
+#define MXS_DMA_DESC_COMMAND_DMA_WRITE 0x1
+#define MXS_DMA_DESC_COMMAND_DMA_READ 0x2
+#define MXS_DMA_DESC_COMMAND_DMA_SENSE 0x3
+#define MXS_DMA_DESC_CHAIN (1 << 2)
+#define MXS_DMA_DESC_IRQ (1 << 3)
+#define MXS_DMA_DESC_NAND_LOCK (1 << 4)
+#define MXS_DMA_DESC_NAND_WAIT_4_READY (1 << 5)
+#define MXS_DMA_DESC_DEC_SEM (1 << 6)
+#define MXS_DMA_DESC_WAIT4END (1 << 7)
+#define MXS_DMA_DESC_HALT_ON_TERMINATE (1 << 8)
+#define MXS_DMA_DESC_TERMINATE_FLUSH (1 << 9)
+#define MXS_DMA_DESC_PIO_WORDS_MASK (0xf << 12)
+#define MXS_DMA_DESC_PIO_WORDS_OFFSET 12
+#define MXS_DMA_DESC_BYTES_MASK (0xffff << 16)
+#define MXS_DMA_DESC_BYTES_OFFSET 16
+
+struct mxs_dma_cmd {
+ unsigned long next;
+ unsigned long data;
+ union {
+ dma_addr_t address;
+ unsigned long alternate;
+ };
+ unsigned long pio_words[DMA_PIO_WORDS];
+};
+
+/*
+ * MXS DMA command descriptor.
+ *
+ * This structure incorporates an MXS DMA hardware command structure, along
+ * with metadata.
+ */
+#define MXS_DMA_DESC_FIRST (1 << 0)
+#define MXS_DMA_DESC_LAST (1 << 1)
+#define MXS_DMA_DESC_READY (1 << 31)
+
+struct mxs_dma_desc {
+ struct mxs_dma_cmd cmd;
+ unsigned int flags;
+ dma_addr_t address;
+ void *buffer;
+ struct list_head node;
+};
+
+/**
+ * MXS DMA channel
+ *
+ * This structure represents a single DMA channel. The MXS platform code
+ * maintains an array of these structures to represent every DMA channel in the
+ * system (see mxs_dma_channels).
+ */
+#define MXS_DMA_FLAGS_IDLE 0
+#define MXS_DMA_FLAGS_BUSY (1 << 0)
+#define MXS_DMA_FLAGS_FREE 0
+#define MXS_DMA_FLAGS_ALLOCATED (1 << 16)
+#define MXS_DMA_FLAGS_VALID (1 << 31)
+
+struct mxs_dma_chan {
+ const char *name;
+ unsigned long dev;
+ struct mxs_dma_device *dma;
+ unsigned int flags;
+ unsigned int active_num;
+ unsigned int pending_num;
+ struct list_head active;
+ struct list_head done;
+};
+
+/* Hardware management ops */
+int mxs_dma_enable(int channel);
+int mxs_dma_disable(int channel);
+int mxs_dma_reset(int channel);
+int mxs_dma_freeze(int channel);
+int mxs_dma_unfreeze(int channel);
+int mxs_dma_read_semaphore(int channel);
+int mxs_dma_enable_irq(int channel, int enable);
+int mxs_dma_irq_is_pending(int channel);
+int mxs_dma_ack_irq(int channel);
+
+/* Channel management ops */
+int mxs_dma_request(int channel);
+int mxs_dma_release(int channel);
+
+/* Descriptor management ops */
+struct mxs_dma_desc *mxs_dma_desc_alloc(void);
+void mxs_dma_desc_free(struct mxs_dma_desc *);
+
+unsigned int mxs_dma_cmd_address(struct mxs_dma_desc *desc);
+int mxs_dma_desc_pending(struct mxs_dma_desc *pdesc);
+
+int mxs_dma_desc_append(int channel, struct mxs_dma_desc *pdesc);
+
+int mxs_dma_get_finished(int channel, struct list_head *head);
+int mxs_dma_finish(int channel, struct list_head *head);
+
+int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan);
+int mxs_dma_go(int chan);
+
+int mxs_dma_init(void);
+
+#endif /* __DMA_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-apbh.h b/arch/arm/include/asm/arch-mx28/regs-apbh.h
new file mode 100644
index 0000000..4edca3c
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-apbh.h
@@ -0,0 +1,462 @@
+/*
+ * Freescale i.MX28 APBH Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_APBH_H__
+#define __REGS_APBH_H__
+
+struct mx28_apbh_regs {
+ mx28_reg(hw_apbh_ctrl0)
+ mx28_reg(hw_apbh_ctrl1)
+ mx28_reg(hw_apbh_ctrl2)
+ mx28_reg(hw_apbh_channel_ctrl)
+ mx28_reg(hw_apbh_devsel)
+ mx28_reg(hw_apbh_dma_burst_size)
+ mx28_reg(hw_apbh_debug)
+
+ uint32_t reserved[36];
+
+ union {
+ struct {
+ mx28_reg(hw_apbh_ch_curcmdar)
+ mx28_reg(hw_apbh_ch_nxtcmdar)
+ mx28_reg(hw_apbh_ch_cmd)
+ mx28_reg(hw_apbh_ch_bar)
+ mx28_reg(hw_apbh_ch_sema)
+ mx28_reg(hw_apbh_ch_debug1)
+ mx28_reg(hw_apbh_ch_debug2)
+ } ch[16];
+ struct {
+ mx28_reg(hw_apbh_ch0_curcmdar)
+ mx28_reg(hw_apbh_ch0_nxtcmdar)
+ mx28_reg(hw_apbh_ch0_cmd)
+ mx28_reg(hw_apbh_ch0_bar)
+ mx28_reg(hw_apbh_ch0_sema)
+ mx28_reg(hw_apbh_ch0_debug1)
+ mx28_reg(hw_apbh_ch0_debug2)
+ mx28_reg(hw_apbh_ch1_curcmdar)
+ mx28_reg(hw_apbh_ch1_nxtcmdar)
+ mx28_reg(hw_apbh_ch1_cmd)
+ mx28_reg(hw_apbh_ch1_bar)
+ mx28_reg(hw_apbh_ch1_sema)
+ mx28_reg(hw_apbh_ch1_debug1)
+ mx28_reg(hw_apbh_ch1_debug2)
+ mx28_reg(hw_apbh_ch2_curcmdar)
+ mx28_reg(hw_apbh_ch2_nxtcmdar)
+ mx28_reg(hw_apbh_ch2_cmd)
+ mx28_reg(hw_apbh_ch2_bar)
+ mx28_reg(hw_apbh_ch2_sema)
+ mx28_reg(hw_apbh_ch2_debug1)
+ mx28_reg(hw_apbh_ch2_debug2)
+ mx28_reg(hw_apbh_ch3_curcmdar)
+ mx28_reg(hw_apbh_ch3_nxtcmdar)
+ mx28_reg(hw_apbh_ch3_cmd)
+ mx28_reg(hw_apbh_ch3_bar)
+ mx28_reg(hw_apbh_ch3_sema)
+ mx28_reg(hw_apbh_ch3_debug1)
+ mx28_reg(hw_apbh_ch3_debug2)
+ mx28_reg(hw_apbh_ch4_curcmdar)
+ mx28_reg(hw_apbh_ch4_nxtcmdar)
+ mx28_reg(hw_apbh_ch4_cmd)
+ mx28_reg(hw_apbh_ch4_bar)
+ mx28_reg(hw_apbh_ch4_sema)
+ mx28_reg(hw_apbh_ch4_debug1)
+ mx28_reg(hw_apbh_ch4_debug2)
+ mx28_reg(hw_apbh_ch5_curcmdar)
+ mx28_reg(hw_apbh_ch5_nxtcmdar)
+ mx28_reg(hw_apbh_ch5_cmd)
+ mx28_reg(hw_apbh_ch5_bar)
+ mx28_reg(hw_apbh_ch5_sema)
+ mx28_reg(hw_apbh_ch5_debug1)
+ mx28_reg(hw_apbh_ch5_debug2)
+ mx28_reg(hw_apbh_ch6_curcmdar)
+ mx28_reg(hw_apbh_ch6_nxtcmdar)
+ mx28_reg(hw_apbh_ch6_cmd)
+ mx28_reg(hw_apbh_ch6_bar)
+ mx28_reg(hw_apbh_ch6_sema)
+ mx28_reg(hw_apbh_ch6_debug1)
+ mx28_reg(hw_apbh_ch6_debug2)
+ mx28_reg(hw_apbh_ch7_curcmdar)
+ mx28_reg(hw_apbh_ch7_nxtcmdar)
+ mx28_reg(hw_apbh_ch7_cmd)
+ mx28_reg(hw_apbh_ch7_bar)
+ mx28_reg(hw_apbh_ch7_sema)
+ mx28_reg(hw_apbh_ch7_debug1)
+ mx28_reg(hw_apbh_ch7_debug2)
+ mx28_reg(hw_apbh_ch8_curcmdar)
+ mx28_reg(hw_apbh_ch8_nxtcmdar)
+ mx28_reg(hw_apbh_ch8_cmd)
+ mx28_reg(hw_apbh_ch8_bar)
+ mx28_reg(hw_apbh_ch8_sema)
+ mx28_reg(hw_apbh_ch8_debug1)
+ mx28_reg(hw_apbh_ch8_debug2)
+ mx28_reg(hw_apbh_ch9_curcmdar)
+ mx28_reg(hw_apbh_ch9_nxtcmdar)
+ mx28_reg(hw_apbh_ch9_cmd)
+ mx28_reg(hw_apbh_ch9_bar)
+ mx28_reg(hw_apbh_ch9_sema)
+ mx28_reg(hw_apbh_ch9_debug1)
+ mx28_reg(hw_apbh_ch9_debug2)
+ mx28_reg(hw_apbh_ch10_curcmdar)
+ mx28_reg(hw_apbh_ch10_nxtcmdar)
+ mx28_reg(hw_apbh_ch10_cmd)
+ mx28_reg(hw_apbh_ch10_bar)
+ mx28_reg(hw_apbh_ch10_sema)
+ mx28_reg(hw_apbh_ch10_debug1)
+ mx28_reg(hw_apbh_ch10_debug2)
+ mx28_reg(hw_apbh_ch11_curcmdar)
+ mx28_reg(hw_apbh_ch11_nxtcmdar)
+ mx28_reg(hw_apbh_ch11_cmd)
+ mx28_reg(hw_apbh_ch11_bar)
+ mx28_reg(hw_apbh_ch11_sema)
+ mx28_reg(hw_apbh_ch11_debug1)
+ mx28_reg(hw_apbh_ch11_debug2)
+ mx28_reg(hw_apbh_ch12_curcmdar)
+ mx28_reg(hw_apbh_ch12_nxtcmdar)
+ mx28_reg(hw_apbh_ch12_cmd)
+ mx28_reg(hw_apbh_ch12_bar)
+ mx28_reg(hw_apbh_ch12_sema)
+ mx28_reg(hw_apbh_ch12_debug1)
+ mx28_reg(hw_apbh_ch12_debug2)
+ mx28_reg(hw_apbh_ch13_curcmdar)
+ mx28_reg(hw_apbh_ch13_nxtcmdar)
+ mx28_reg(hw_apbh_ch13_cmd)
+ mx28_reg(hw_apbh_ch13_bar)
+ mx28_reg(hw_apbh_ch13_sema)
+ mx28_reg(hw_apbh_ch13_debug1)
+ mx28_reg(hw_apbh_ch13_debug2)
+ mx28_reg(hw_apbh_ch14_curcmdar)
+ mx28_reg(hw_apbh_ch14_nxtcmdar)
+ mx28_reg(hw_apbh_ch14_cmd)
+ mx28_reg(hw_apbh_ch14_bar)
+ mx28_reg(hw_apbh_ch14_sema)
+ mx28_reg(hw_apbh_ch14_debug1)
+ mx28_reg(hw_apbh_ch14_debug2)
+ mx28_reg(hw_apbh_ch15_curcmdar)
+ mx28_reg(hw_apbh_ch15_nxtcmdar)
+ mx28_reg(hw_apbh_ch15_cmd)
+ mx28_reg(hw_apbh_ch15_bar)
+ mx28_reg(hw_apbh_ch15_sema)
+ mx28_reg(hw_apbh_ch15_debug1)
+ mx28_reg(hw_apbh_ch15_debug2)
+ };
+ };
+ mx28_reg(hw_apbh_version)
+};
+
+#define APBH_CTRL0_SFTRST (1 << 31)
+#define APBH_CTRL0_CLKGATE (1 << 30)
+#define APBH_CTRL0_AHB_BURST8_EN (1 << 29)
+#define APBH_CTRL0_APB_BURST_EN (1 << 28)
+#define APBH_CTRL0_RSVD0_MASK (0xfff << 16)
+#define APBH_CTRL0_RSVD0_OFFSET 16
+#define APBH_CTRL0_CLKGATE_CHANNEL_MASK 0xffff
+#define APBH_CTRL0_CLKGATE_CHANNEL_OFFSET 0
+#define APBH_CTRL0_CLKGATE_CHANNEL_SSP0 0x0001
+#define APBH_CTRL0_CLKGATE_CHANNEL_SSP1 0x0002
+#define APBH_CTRL0_CLKGATE_CHANNEL_SSP2 0x0004
+#define APBH_CTRL0_CLKGATE_CHANNEL_SSP3 0x0008
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND0 0x0010
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND1 0x0020
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND2 0x0040
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND3 0x0080
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND4 0x0100
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND5 0x0200
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND6 0x0400
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND7 0x0800
+#define APBH_CTRL0_CLKGATE_CHANNEL_HSADC 0x1000
+#define APBH_CTRL0_CLKGATE_CHANNEL_LCDIF 0x2000
+
+#define APBH_CTRL1_CH15_CMDCMPLT_IRQ_EN (1 << 31)
+#define APBH_CTRL1_CH14_CMDCMPLT_IRQ_EN (1 << 30)
+#define APBH_CTRL1_CH13_CMDCMPLT_IRQ_EN (1 << 29)
+#define APBH_CTRL1_CH12_CMDCMPLT_IRQ_EN (1 << 28)
+#define APBH_CTRL1_CH11_CMDCMPLT_IRQ_EN (1 << 27)
+#define APBH_CTRL1_CH10_CMDCMPLT_IRQ_EN (1 << 26)
+#define APBH_CTRL1_CH9_CMDCMPLT_IRQ_EN (1 << 25)
+#define APBH_CTRL1_CH8_CMDCMPLT_IRQ_EN (1 << 24)
+#define APBH_CTRL1_CH7_CMDCMPLT_IRQ_EN (1 << 23)
+#define APBH_CTRL1_CH6_CMDCMPLT_IRQ_EN (1 << 22)
+#define APBH_CTRL1_CH5_CMDCMPLT_IRQ_EN (1 << 21)
+#define APBH_CTRL1_CH4_CMDCMPLT_IRQ_EN (1 << 20)
+#define APBH_CTRL1_CH3_CMDCMPLT_IRQ_EN (1 << 19)
+#define APBH_CTRL1_CH2_CMDCMPLT_IRQ_EN (1 << 18)
+#define APBH_CTRL1_CH1_CMDCMPLT_IRQ_EN (1 << 17)
+#define APBH_CTRL1_CH0_CMDCMPLT_IRQ_EN (1 << 16)
+#define APBH_CTRL1_CH_CMDCMPLT_IRQ_EN_OFFSET 16
+#define APBH_CTRL1_CH_CMDCMPLT_IRQ_EN_MASK (0xffff << 16)
+#define APBH_CTRL1_CH15_CMDCMPLT_IRQ (1 << 15)
+#define APBH_CTRL1_CH14_CMDCMPLT_IRQ (1 << 14)
+#define APBH_CTRL1_CH13_CMDCMPLT_IRQ (1 << 13)
+#define APBH_CTRL1_CH12_CMDCMPLT_IRQ (1 << 12)
+#define APBH_CTRL1_CH11_CMDCMPLT_IRQ (1 << 11)
+#define APBH_CTRL1_CH10_CMDCMPLT_IRQ (1 << 10)
+#define APBH_CTRL1_CH9_CMDCMPLT_IRQ (1 << 9)
+#define APBH_CTRL1_CH8_CMDCMPLT_IRQ (1 << 8)
+#define APBH_CTRL1_CH7_CMDCMPLT_IRQ (1 << 7)
+#define APBH_CTRL1_CH6_CMDCMPLT_IRQ (1 << 6)
+#define APBH_CTRL1_CH5_CMDCMPLT_IRQ (1 << 5)
+#define APBH_CTRL1_CH4_CMDCMPLT_IRQ (1 << 4)
+#define APBH_CTRL1_CH3_CMDCMPLT_IRQ (1 << 3)
+#define APBH_CTRL1_CH2_CMDCMPLT_IRQ (1 << 2)
+#define APBH_CTRL1_CH1_CMDCMPLT_IRQ (1 << 1)
+#define APBH_CTRL1_CH0_CMDCMPLT_IRQ (1 << 0)
+
+#define APBH_CTRL2_CH15_ERROR_STATUS (1 << 31)
+#define APBH_CTRL2_CH14_ERROR_STATUS (1 << 30)
+#define APBH_CTRL2_CH13_ERROR_STATUS (1 << 29)
+#define APBH_CTRL2_CH12_ERROR_STATUS (1 << 28)
+#define APBH_CTRL2_CH11_ERROR_STATUS (1 << 27)
+#define APBH_CTRL2_CH10_ERROR_STATUS (1 << 26)
+#define APBH_CTRL2_CH9_ERROR_STATUS (1 << 25)
+#define APBH_CTRL2_CH8_ERROR_STATUS (1 << 24)
+#define APBH_CTRL2_CH7_ERROR_STATUS (1 << 23)
+#define APBH_CTRL2_CH6_ERROR_STATUS (1 << 22)
+#define APBH_CTRL2_CH5_ERROR_STATUS (1 << 21)
+#define APBH_CTRL2_CH4_ERROR_STATUS (1 << 20)
+#define APBH_CTRL2_CH3_ERROR_STATUS (1 << 19)
+#define APBH_CTRL2_CH2_ERROR_STATUS (1 << 18)
+#define APBH_CTRL2_CH1_ERROR_STATUS (1 << 17)
+#define APBH_CTRL2_CH0_ERROR_STATUS (1 << 16)
+#define APBH_CTRL2_CH15_ERROR_IRQ (1 << 15)
+#define APBH_CTRL2_CH14_ERROR_IRQ (1 << 14)
+#define APBH_CTRL2_CH13_ERROR_IRQ (1 << 13)
+#define APBH_CTRL2_CH12_ERROR_IRQ (1 << 12)
+#define APBH_CTRL2_CH11_ERROR_IRQ (1 << 11)
+#define APBH_CTRL2_CH10_ERROR_IRQ (1 << 10)
+#define APBH_CTRL2_CH9_ERROR_IRQ (1 << 9)
+#define APBH_CTRL2_CH8_ERROR_IRQ (1 << 8)
+#define APBH_CTRL2_CH7_ERROR_IRQ (1 << 7)
+#define APBH_CTRL2_CH6_ERROR_IRQ (1 << 6)
+#define APBH_CTRL2_CH5_ERROR_IRQ (1 << 5)
+#define APBH_CTRL2_CH4_ERROR_IRQ (1 << 4)
+#define APBH_CTRL2_CH3_ERROR_IRQ (1 << 3)
+#define APBH_CTRL2_CH2_ERROR_IRQ (1 << 2)
+#define APBH_CTRL2_CH1_ERROR_IRQ (1 << 1)
+#define APBH_CTRL2_CH0_ERROR_IRQ (1 << 0)
+
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_MASK (0xffff << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET 16
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP0 (0x0001 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP1 (0x0002 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP2 (0x0004 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP3 (0x0008 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND0 (0x0010 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND1 (0x0020 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND2 (0x0040 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND3 (0x0080 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND4 (0x0100 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND5 (0x0200 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND6 (0x0400 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND7 (0x0800 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_HSADC (0x1000 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_LCDIF (0x2000 << 16)
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_MASK 0xffff
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_OFFSET 0
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP0 0x0001
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP1 0x0002
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP2 0x0004
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP3 0x0008
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND0 0x0010
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND1 0x0020
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND2 0x0040
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND3 0x0080
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND4 0x0100
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND5 0x0200
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND6 0x0400
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND7 0x0800
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_HSADC 0x1000
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_LCDIF 0x2000
+
+#define APBH_DEVSEL_CH15_MASK (0x3 << 30)
+#define APBH_DEVSEL_CH15_OFFSET 30
+#define APBH_DEVSEL_CH14_MASK (0x3 << 28)
+#define APBH_DEVSEL_CH14_OFFSET 28
+#define APBH_DEVSEL_CH13_MASK (0x3 << 26)
+#define APBH_DEVSEL_CH13_OFFSET 26
+#define APBH_DEVSEL_CH12_MASK (0x3 << 24)
+#define APBH_DEVSEL_CH12_OFFSET 24
+#define APBH_DEVSEL_CH11_MASK (0x3 << 22)
+#define APBH_DEVSEL_CH11_OFFSET 22
+#define APBH_DEVSEL_CH10_MASK (0x3 << 20)
+#define APBH_DEVSEL_CH10_OFFSET 20
+#define APBH_DEVSEL_CH9_MASK (0x3 << 18)
+#define APBH_DEVSEL_CH9_OFFSET 18
+#define APBH_DEVSEL_CH8_MASK (0x3 << 16)
+#define APBH_DEVSEL_CH8_OFFSET 16
+#define APBH_DEVSEL_CH7_MASK (0x3 << 14)
+#define APBH_DEVSEL_CH7_OFFSET 14
+#define APBH_DEVSEL_CH6_MASK (0x3 << 12)
+#define APBH_DEVSEL_CH6_OFFSET 12
+#define APBH_DEVSEL_CH5_MASK (0x3 << 10)
+#define APBH_DEVSEL_CH5_OFFSET 10
+#define APBH_DEVSEL_CH4_MASK (0x3 << 8)
+#define APBH_DEVSEL_CH4_OFFSET 8
+#define APBH_DEVSEL_CH3_MASK (0x3 << 6)
+#define APBH_DEVSEL_CH3_OFFSET 6
+#define APBH_DEVSEL_CH2_MASK (0x3 << 4)
+#define APBH_DEVSEL_CH2_OFFSET 4
+#define APBH_DEVSEL_CH1_MASK (0x3 << 2)
+#define APBH_DEVSEL_CH1_OFFSET 2
+#define APBH_DEVSEL_CH0_MASK (0x3 << 0)
+#define APBH_DEVSEL_CH0_OFFSET 0
+
+#define APBH_DMA_BURST_SIZE_CH15_MASK (0x3 << 30)
+#define APBH_DMA_BURST_SIZE_CH15_OFFSET 30
+#define APBH_DMA_BURST_SIZE_CH14_MASK (0x3 << 28)
+#define APBH_DMA_BURST_SIZE_CH14_OFFSET 28
+#define APBH_DMA_BURST_SIZE_CH13_MASK (0x3 << 26)
+#define APBH_DMA_BURST_SIZE_CH13_OFFSET 26
+#define APBH_DMA_BURST_SIZE_CH12_MASK (0x3 << 24)
+#define APBH_DMA_BURST_SIZE_CH12_OFFSET 24
+#define APBH_DMA_BURST_SIZE_CH11_MASK (0x3 << 22)
+#define APBH_DMA_BURST_SIZE_CH11_OFFSET 22
+#define APBH_DMA_BURST_SIZE_CH10_MASK (0x3 << 20)
+#define APBH_DMA_BURST_SIZE_CH10_OFFSET 20
+#define APBH_DMA_BURST_SIZE_CH9_MASK (0x3 << 18)
+#define APBH_DMA_BURST_SIZE_CH9_OFFSET 18
+#define APBH_DMA_BURST_SIZE_CH8_MASK (0x3 << 16)
+#define APBH_DMA_BURST_SIZE_CH8_OFFSET 16
+#define APBH_DMA_BURST_SIZE_CH8_BURST0 (0x0 << 16)
+#define APBH_DMA_BURST_SIZE_CH8_BURST4 (0x1 << 16)
+#define APBH_DMA_BURST_SIZE_CH8_BURST8 (0x2 << 16)
+#define APBH_DMA_BURST_SIZE_CH7_MASK (0x3 << 14)
+#define APBH_DMA_BURST_SIZE_CH7_OFFSET 14
+#define APBH_DMA_BURST_SIZE_CH6_MASK (0x3 << 12)
+#define APBH_DMA_BURST_SIZE_CH6_OFFSET 12
+#define APBH_DMA_BURST_SIZE_CH5_MASK (0x3 << 10)
+#define APBH_DMA_BURST_SIZE_CH5_OFFSET 10
+#define APBH_DMA_BURST_SIZE_CH4_MASK (0x3 << 8)
+#define APBH_DMA_BURST_SIZE_CH4_OFFSET 8
+#define APBH_DMA_BURST_SIZE_CH3_MASK (0x3 << 6)
+#define APBH_DMA_BURST_SIZE_CH3_OFFSET 6
+#define APBH_DMA_BURST_SIZE_CH3_BURST0 (0x0 << 6)
+#define APBH_DMA_BURST_SIZE_CH3_BURST4 (0x1 << 6)
+#define APBH_DMA_BURST_SIZE_CH3_BURST8 (0x2 << 6)
+
+#define APBH_DMA_BURST_SIZE_CH2_MASK (0x3 << 4)
+#define APBH_DMA_BURST_SIZE_CH2_OFFSET 4
+#define APBH_DMA_BURST_SIZE_CH2_BURST0 (0x0 << 4)
+#define APBH_DMA_BURST_SIZE_CH2_BURST4 (0x1 << 4)
+#define APBH_DMA_BURST_SIZE_CH2_BURST8 (0x2 << 4)
+#define APBH_DMA_BURST_SIZE_CH1_MASK (0x3 << 2)
+#define APBH_DMA_BURST_SIZE_CH1_OFFSET 2
+#define APBH_DMA_BURST_SIZE_CH1_BURST0 (0x0 << 2)
+#define APBH_DMA_BURST_SIZE_CH1_BURST4 (0x1 << 2)
+#define APBH_DMA_BURST_SIZE_CH1_BURST8 (0x2 << 2)
+
+#define APBH_DMA_BURST_SIZE_CH0_MASK 0x3
+#define APBH_DMA_BURST_SIZE_CH0_OFFSET 0
+#define APBH_DMA_BURST_SIZE_CH0_BURST0 0x0
+#define APBH_DMA_BURST_SIZE_CH0_BURST4 0x1
+#define APBH_DMA_BURST_SIZE_CH0_BURST8 0x2
+
+#define APBH_DEBUG_GPMI_ONE_FIFO (1 << 0)
+
+#define APBH_CHn_CURCMDAR_CMD_ADDR_MASK 0xffffffff
+#define APBH_CHn_CURCMDAR_CMD_ADDR_OFFSET 0
+
+#define APBH_CHn_NXTCMDAR_CMD_ADDR_MASK 0xffffffff
+#define APBH_CHn_NXTCMDAR_CMD_ADDR_OFFSET 0
+
+#define APBH_CHn_CMD_XFER_COUNT_MASK (0xffff << 16)
+#define APBH_CHn_CMD_XFER_COUNT_OFFSET 16
+#define APBH_CHn_CMD_CMDWORDS_MASK (0xf << 12)
+#define APBH_CHn_CMD_CMDWORDS_OFFSET 12
+#define APBH_CHn_CMD_HALTONTERMINATE (1 << 8)
+#define APBH_CHn_CMD_WAIT4ENDCMD (1 << 7)
+#define APBH_CHn_CMD_SEMAPHORE (1 << 6)
+#define APBH_CHn_CMD_NANDWAIT4READY (1 << 5)
+#define APBH_CHn_CMD_NANDLOCK (1 << 4)
+#define APBH_CHn_CMD_IRQONCMPLT (1 << 3)
+#define APBH_CHn_CMD_CHAIN (1 << 2)
+#define APBH_CHn_CMD_COMMAND_MASK 0x3
+#define APBH_CHn_CMD_COMMAND_OFFSET 0
+#define APBH_CHn_CMD_COMMAND_NO_DMA_XFER 0x0
+#define APBH_CHn_CMD_COMMAND_DMA_WRITE 0x1
+#define APBH_CHn_CMD_COMMAND_DMA_READ 0x2
+#define APBH_CHn_CMD_COMMAND_DMA_SENSE 0x3
+
+#define APBH_CHn_BAR_ADDRESS_MASK 0xffffffff
+#define APBH_CHn_BAR_ADDRESS_OFFSET 0
+
+#define APBH_CHn_SEMA_RSVD2_MASK (0xff << 24)
+#define APBH_CHn_SEMA_RSVD2_OFFSET 24
+#define APBH_CHn_SEMA_PHORE_MASK (0xff << 16)
+#define APBH_CHn_SEMA_PHORE_OFFSET 16
+#define APBH_CHn_SEMA_RSVD1_MASK (0xff << 8)
+#define APBH_CHn_SEMA_RSVD1_OFFSET 8
+#define APBH_CHn_SEMA_INCREMENT_SEMA_MASK (0xff << 0)
+#define APBH_CHn_SEMA_INCREMENT_SEMA_OFFSET 0
+
+#define APBH_CHn_DEBUG1_REQ (1 << 31)
+#define APBH_CHn_DEBUG1_BURST (1 << 30)
+#define APBH_CHn_DEBUG1_KICK (1 << 29)
+#define APBH_CHn_DEBUG1_END (1 << 28)
+#define APBH_CHn_DEBUG1_SENSE (1 << 27)
+#define APBH_CHn_DEBUG1_READY (1 << 26)
+#define APBH_CHn_DEBUG1_LOCK (1 << 25)
+#define APBH_CHn_DEBUG1_NEXTCMDADDRVALID (1 << 24)
+#define APBH_CHn_DEBUG1_RD_FIFO_EMPTY (1 << 23)
+#define APBH_CHn_DEBUG1_RD_FIFO_FULL (1 << 22)
+#define APBH_CHn_DEBUG1_WR_FIFO_EMPTY (1 << 21)
+#define APBH_CHn_DEBUG1_WR_FIFO_FULL (1 << 20)
+#define APBH_CHn_DEBUG1_RSVD1_MASK (0x7fff << 5)
+#define APBH_CHn_DEBUG1_RSVD1_OFFSET 5
+#define APBH_CHn_DEBUG1_STATEMACHINE_MASK 0x1f
+#define APBH_CHn_DEBUG1_STATEMACHINE_OFFSET 0
+#define APBH_CHn_DEBUG1_STATEMACHINE_IDLE 0x00
+#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD1 0x01
+#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD3 0x02
+#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD2 0x03
+#define APBH_CHn_DEBUG1_STATEMACHINE_XFER_DECODE 0x04
+#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_WAIT 0x05
+#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD4 0x06
+#define APBH_CHn_DEBUG1_STATEMACHINE_PIO_REQ 0x07
+#define APBH_CHn_DEBUG1_STATEMACHINE_READ_FLUSH 0x08
+#define APBH_CHn_DEBUG1_STATEMACHINE_READ_WAIT 0x09
+#define APBH_CHn_DEBUG1_STATEMACHINE_WRITE 0x0c
+#define APBH_CHn_DEBUG1_STATEMACHINE_READ_REQ 0x0d
+#define APBH_CHn_DEBUG1_STATEMACHINE_CHECK_CHAIN 0x0e
+#define APBH_CHn_DEBUG1_STATEMACHINE_XFER_COMPLETE 0x0f
+#define APBH_CHn_DEBUG1_STATEMACHINE_TERMINATE 0x14
+#define APBH_CHn_DEBUG1_STATEMACHINE_WAIT_END 0x15
+#define APBH_CHn_DEBUG1_STATEMACHINE_WRITE_WAIT 0x1c
+#define APBH_CHn_DEBUG1_STATEMACHINE_HALT_AFTER_TERM 0x1d
+#define APBH_CHn_DEBUG1_STATEMACHINE_CHECK_WAIT 0x1e
+#define APBH_CHn_DEBUG1_STATEMACHINE_WAIT_READY 0x1f
+
+#define APBH_CHn_DEBUG2_APB_BYTES_MASK (0xffff << 16)
+#define APBH_CHn_DEBUG2_APB_BYTES_OFFSET 16
+#define APBH_CHn_DEBUG2_AHB_BYTES_MASK 0xffff
+#define APBH_CHn_DEBUG2_AHB_BYTES_OFFSET 0
+
+#define APBH_VERSION_MAJOR_MASK (0xff << 24)
+#define APBH_VERSION_MAJOR_OFFSET 24
+#define APBH_VERSION_MINOR_MASK (0xff << 16)
+#define APBH_VERSION_MINOR_OFFSET 16
+#define APBH_VERSION_STEP_MASK 0xffff
+#define APBH_VERSION_STEP_OFFSET 0
+
+#endif /* __REGS_APBH_H__ */
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 9d945a0..514828b 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libdma.o
COBJS-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o
+COBJS-$(CONFIG_APBH_DMA) += apbh_dma.o
COBJS-$(CONFIG_FSL_DMA) += fsl_dma.o
COBJS := $(COBJS-y)
diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c
new file mode 100644
index 0000000..38a7e8b
--- /dev/null
+++ b/drivers/dma/apbh_dma.c
@@ -0,0 +1,693 @@
+/*
+ * Freescale i.MX28 APBH DMA driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/list.h>
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-apbh.h>
+#include <asm/arch/mx28.h>
+#include <asm/arch/dma.h>
+
+static struct mxs_dma_chan mxs_dma_channels[MXS_MAX_DMA_CHANNELS];
+
+/*
+ * Test is the DMA channel is valid channel
+ */
+int mxs_dma_validate_chan(int channel)
+{
+ struct mxs_dma_chan *pchan;
+
+ if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS))
+ return -EINVAL;
+
+ pchan = mxs_dma_channels + channel;
+ if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED))
+ return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * Enable a DMA channel.
+ *
+ * If the given channel has any DMA descriptors on its active list, this
+ * function causes the DMA hardware to begin processing them.
+ *
+ * This function marks the DMA channel as "busy," whether or not there are any
+ * descriptors to process.
+ */
+int mxs_dma_enable(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ unsigned int sem;
+ struct mxs_dma_chan *pchan;
+ struct mxs_dma_desc *pdesc;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ pchan = mxs_dma_channels + channel;
+
+ if (pchan->pending_num == 0) {
+ pchan->flags |= MXS_DMA_FLAGS_BUSY;
+ return 0;
+ }
+
+ pdesc = list_first_entry(&pchan->active, struct mxs_dma_desc, node);
+ if (pdesc == NULL)
+ return -EFAULT;
+
+ if (pchan->flags & MXS_DMA_FLAGS_BUSY) {
+ if (!(pdesc->cmd.data & MXS_DMA_DESC_CHAIN))
+ return 0;
+
+ sem = mxs_dma_read_semaphore(channel);
+ if (sem == 0)
+ return 0;
+
+ if (sem == 1) {
+ pdesc = list_entry(pdesc->node.next,
+ struct mxs_dma_desc, node);
+ writel(mxs_dma_cmd_address(pdesc),
+ &apbh_regs->ch[channel].hw_apbh_ch_nxtcmdar);
+ }
+ writel(pchan->pending_num,
+ &apbh_regs->ch[channel].hw_apbh_ch_sema);
+ pchan->active_num += pchan->pending_num;
+ pchan->pending_num = 0;
+ } else {
+ pchan->active_num += pchan->pending_num;
+ pchan->pending_num = 0;
+ writel(mxs_dma_cmd_address(pdesc),
+ &apbh_regs->ch[channel].hw_apbh_ch_nxtcmdar);
+ writel(pchan->active_num,
+ &apbh_regs->ch[channel].hw_apbh_ch_sema);
+ writel(1 << (channel + APBH_CTRL0_CLKGATE_CHANNEL_OFFSET),
+ &apbh_regs->hw_apbh_ctrl0_clr);
+ }
+
+ pchan->flags |= MXS_DMA_FLAGS_BUSY;
+ return 0;
+}
+
+/*
+ * Disable a DMA channel.
+ *
+ * This function shuts down a DMA channel and marks it as "not busy." Any
+ * descriptors on the active list are immediately moved to the head of the
+ * "done" list, whether or not they have actually been processed by the
+ * hardware. The "ready" flags of these descriptors are NOT cleared, so they
+ * still appear to be active.
+ *
+ * This function immediately shuts down a DMA channel's hardware, aborting any
+ * I/O that may be in progress, potentially leaving I/O hardware in an undefined
+ * state. It is unwise to call this function if there is ANY chance the hardware
+ * is still processing a command.
+ */
+int mxs_dma_disable(int channel)
+{
+ struct mxs_dma_chan *pchan;
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ pchan = mxs_dma_channels + channel;
+
+ if (!(pchan->flags & MXS_DMA_FLAGS_BUSY))
+ return -EINVAL;
+
+ writel(1 << (channel + APBH_CTRL0_CLKGATE_CHANNEL_OFFSET),
+ &apbh_regs->hw_apbh_ctrl0_set);
+
+ pchan->flags &= ~MXS_DMA_FLAGS_BUSY;
+ pchan->active_num = 0;
+ pchan->pending_num = 0;
+ list_splice_init(&pchan->active, &pchan->done);
+
+ return 0;
+}
+
+/*
+ * Resets the DMA channel hardware.
+ */
+int mxs_dma_reset(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ writel(1 << (channel + APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET),
+ &apbh_regs->hw_apbh_channel_ctrl_set);
+
+ return 0;
+}
+
+/*
+ * Freeze a DMA channel.
+ *
+ * This function causes the channel to continuously fail arbitration for bus
+ * access, which halts all forward progress without losing any state. A call to
+ * mxs_dma_unfreeze() will cause the channel to continue its current operation
+ * with no ill effect.
+ */
+int mxs_dma_freeze(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ writel(1 << (channel + APBH_CHANNEL_CTRL_FREEZE_CHANNEL_OFFSET),
+ &apbh_regs->hw_apbh_channel_ctrl_set);
+
+ return 0;
+}
+
+/*
+ * Unfreeze a DMA channel.
+ *
+ * This function reverses the effect of mxs_dma_freeze(), enabling the DMA
+ * channel to continue from where it was frozen.
+ */
+int mxs_dma_unfreeze(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ writel(1 << (channel + APBH_CHANNEL_CTRL_FREEZE_CHANNEL_OFFSET),
+ &apbh_regs->hw_apbh_channel_ctrl_clr);
+
+ return 0;
+}
+
+/*
+ * Read a DMA channel's hardware semaphore.
+ *
+ * As used by the MXS platform's DMA software, the DMA channel's hardware
+ * semaphore reflects the number of DMA commands the hardware will process, but
+ * has not yet finished. This is a volatile value read directly from hardware,
+ * so it must be be viewed as immediately stale.
+ *
+ * If the channel is not marked busy, or has finished processing all its
+ * commands, this value should be zero.
+ *
+ * See mxs_dma_append() for details on how DMA command blocks must be configured
+ * to maintain the expected behavior of the semaphore's value.
+ */
+int mxs_dma_read_semaphore(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ uint32_t tmp;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ tmp = readl(&apbh_regs->ch[channel].hw_apbh_ch_sema);
+
+ tmp &= APBH_CHn_SEMA_PHORE_MASK;
+ tmp >>= APBH_CHn_SEMA_PHORE_OFFSET;
+
+ return tmp;
+}
+
+/*
+ * Enable or disable DMA interrupt.
+ *
+ * This function enables the given DMA channel to interrupt the CPU.
+ */
+int mxs_dma_enable_irq(int channel, int enable)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ if (enable)
+ writel(1 << (channel + APBH_CTRL1_CH_CMDCMPLT_IRQ_EN_OFFSET),
+ &apbh_regs->hw_apbh_ctrl1_set);
+ else
+ writel(1 << (channel + APBH_CTRL1_CH_CMDCMPLT_IRQ_EN_OFFSET),
+ &apbh_regs->hw_apbh_ctrl1_clr);
+
+ return 0;
+}
+
+/*
+ * Check if a DMA interrupt is pending.
+ */
+int mxs_dma_irq_is_pending(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ uint32_t tmp;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ tmp = readl(&apbh_regs->hw_apbh_ctrl1);
+ tmp |= readl(&apbh_regs->hw_apbh_ctrl2);
+
+ return (tmp >> channel) & 1;
+}
+
+/*
+ * Clear DMA interrupt.
+ *
+ * The software that is using the DMA channel must register to receive its
+ * interrupts and, when they arrive, must call this function to clear them.
+ */
+int mxs_dma_ack_irq(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ writel(1 << channel, &apbh_regs->hw_apbh_ctrl1_clr);
+ writel(1 << channel, &apbh_regs->hw_apbh_ctrl2_clr);
+
+ return 0;
+}
+
+/*
+ * Request to reserve a DMA channel
+ */
+int mxs_dma_request(int channel)
+{
+ struct mxs_dma_chan *pchan;
+
+ if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS))
+ return -EINVAL;
+
+ pchan = mxs_dma_channels + channel;
+ if ((pchan->flags & MXS_DMA_FLAGS_VALID) != MXS_DMA_FLAGS_VALID)
+ return -ENODEV;
+
+ if (pchan->flags & MXS_DMA_FLAGS_ALLOCATED)
+ return -EBUSY;
+
+ pchan->flags |= MXS_DMA_FLAGS_ALLOCATED;
+ pchan->active_num = 0;
+ pchan->pending_num = 0;
+
+ INIT_LIST_HEAD(&pchan->active);
+ INIT_LIST_HEAD(&pchan->done);
+
+ return 0;
+}
+
+/*
+ * Release a DMA channel.
+ *
+ * This function releases a DMA channel from its current owner.
+ *
+ * The channel will NOT be released if it's marked "busy" (see
+ * mxs_dma_enable()).
+ */
+int mxs_dma_release(int channel)
+{
+ struct mxs_dma_chan *pchan;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ pchan = mxs_dma_channels + channel;
+
+ if (pchan->flags & MXS_DMA_FLAGS_BUSY)
+ return -EBUSY;
+
+ pchan->dev = 0;
+ pchan->active_num = 0;
+ pchan->pending_num = 0;
+ pchan->flags &= ~MXS_DMA_FLAGS_ALLOCATED;
+
+ return 0;
+}
+
+/*
+ * Allocate DMA descriptor
+ */
+struct mxs_dma_desc *mxs_dma_desc_alloc(void)
+{
+ struct mxs_dma_desc *pdesc;
+
+ pdesc = memalign(MXS_DMA_ALIGNMENT, sizeof(struct mxs_dma_desc));
+
+ if (pdesc == NULL)
+ return NULL;
+
+ memset(pdesc, 0, sizeof(*pdesc));
+ pdesc->address = (dma_addr_t)pdesc;
+
+ return pdesc;
+};
+
+/*
+ * Free DMA descriptor
+ */
+void mxs_dma_desc_free(struct mxs_dma_desc *pdesc)
+{
+ if (pdesc == NULL)
+ return;
+
+ free(pdesc);
+}
+
+/*
+ * Return the address of the command within a descriptor.
+ */
+unsigned int mxs_dma_cmd_address(struct mxs_dma_desc *desc)
+{
+ return desc->address + offsetof(struct mxs_dma_desc, cmd);
+}
+
+/*
+ * Check if descriptor is on a channel's active list.
+ *
+ * This function returns the state of a descriptor's "ready" flag. This flag is
+ * usually set only if the descriptor appears on a channel's active list. The
+ * descriptor may or may not have already been processed by the hardware.
+ *
+ * The "ready" flag is set when the descriptor is submitted to a channel by a
+ * call to mxs_dma_append() or mxs_dma_append_list(). The "ready" flag is
+ * cleared when a processed descriptor is moved off the active list by a call
+ * to mxs_dma_finish(). The "ready" flag is NOT cleared if the descriptor is
+ * aborted by a call to mxs_dma_disable().
+ */
+int mxs_dma_desc_pending(struct mxs_dma_desc *pdesc)
+{
+ return pdesc->flags & MXS_DMA_DESC_READY;
+}
+
+/*
+ * Add a DMA descriptor to a channel.
+ *
+ * If the descriptor list for this channel is not empty, this function sets the
+ * CHAIN bit and the NEXTCMD_ADDR fields in the last descriptor's DMA command so
+ * it will chain to the new descriptor's command.
+ *
+ * Then, this function marks the new descriptor as "ready," adds it to the end
+ * of the active descriptor list, and increments the count of pending
+ * descriptors.
+ *
+ * The MXS platform DMA software imposes some rules on DMA commands to maintain
+ * important invariants. These rules are NOT checked, but they must be carefully
+ * applied by software that uses MXS DMA channels.
+ *
+ * Invariant:
+ * The DMA channel's hardware semaphore must reflect the number of DMA
+ * commands the hardware will process, but has not yet finished.
+ *
+ * Explanation:
+ * A DMA channel begins processing commands when its hardware semaphore is
+ * written with a value greater than zero, and it stops processing commands
+ * when the semaphore returns to zero.
+ *
+ * When a channel finishes a DMA command, it will decrement its semaphore if
+ * the DECREMENT_SEMAPHORE bit is set in that command's flags bits.
+ *
+ * In principle, it's not necessary for the DECREMENT_SEMAPHORE to be set,
+ * unless it suits the purposes of the software. For example, one could
+ * construct a series of five DMA commands, with the DECREMENT_SEMAPHORE
+ * bit set only in the last one. Then, setting the DMA channel's hardware
+ * semaphore to one would cause the entire series of five commands to be
+ * processed. However, this example would violate the invariant given above.
+ *
+ * Rule:
+ * ALL DMA commands MUST have the DECREMENT_SEMAPHORE bit set so that the DMA
+ * channel's hardware semaphore will be decremented EVERY time a command is
+ * processed.
+ */
+int mxs_dma_desc_append(int channel, struct mxs_dma_desc *pdesc)
+{
+ struct mxs_dma_chan *pchan;
+ struct mxs_dma_desc *last;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ pchan = mxs_dma_channels + channel;
+
+ pdesc->cmd.next = mxs_dma_cmd_address(pdesc);
+ pdesc->flags |= MXS_DMA_DESC_FIRST | MXS_DMA_DESC_LAST;
+
+ if (!list_empty(&pchan->active)) {
+ last = list_entry(pchan->active.prev, struct mxs_dma_desc,
+ node);
+
+ pdesc->flags &= ~MXS_DMA_DESC_FIRST;
+ last->flags &= ~MXS_DMA_DESC_LAST;
+
+ last->cmd.next = mxs_dma_cmd_address(pdesc);
+ last->cmd.data |= MXS_DMA_DESC_CHAIN;
+ }
+ pdesc->flags |= MXS_DMA_DESC_READY;
+ if (pdesc->flags & MXS_DMA_DESC_FIRST)
+ pchan->pending_num++;
+ list_add_tail(&pdesc->node, &pchan->active);
+
+ return ret;
+}
+
+/*
+ * Retrieve processed DMA descriptors.
+ *
+ * This function moves all the descriptors from the DMA channel's "done" list to
+ * the head of the given list.
+ */
+int mxs_dma_get_finished(int channel, struct list_head *head)
+{
+ struct mxs_dma_chan *pchan;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ if (head == NULL)
+ return 0;
+
+ pchan = mxs_dma_channels + channel;
+
+ list_splice(&pchan->done, head);
+
+ return 0;
+}
+
+/*
+ * Clean up processed DMA descriptors.
+ *
+ * This function removes processed DMA descriptors from the "active" list. Pass
+ * in a non-NULL list head to get the descriptors moved to your list. Pass NULL
+ * to get the descriptors moved to the channel's "done" list. Descriptors on
+ * the "done" list can be retrieved with mxs_dma_get_finished().
+ *
+ * This function marks the DMA channel as "not busy" if no unprocessed
+ * descriptors remain on the "active" list.
+ */
+int mxs_dma_finish(int channel, struct list_head *head)
+{
+ int sem;
+ struct mxs_dma_chan *pchan;
+ struct list_head *p, *q;
+ struct mxs_dma_desc *pdesc;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ pchan = mxs_dma_channels + channel;
+
+ sem = mxs_dma_read_semaphore(channel);
+ if (sem < 0)
+ return sem;
+
+ if (sem == pchan->active_num)
+ return 0;
+
+ list_for_each_safe(p, q, &pchan->active) {
+ if ((pchan->active_num) <= sem)
+ break;
+
+ pdesc = list_entry(p, struct mxs_dma_desc, node);
+ pdesc->flags &= ~MXS_DMA_DESC_READY;
+
+ if (head)
+ list_move_tail(p, head);
+ else
+ list_move_tail(p, &pchan->done);
+
+ if (pdesc->flags & MXS_DMA_DESC_LAST)
+ pchan->active_num--;
+ }
+
+ if (sem == 0)
+ pchan->flags &= ~MXS_DMA_FLAGS_BUSY;
+
+ return 0;
+}
+
+/*
+ * Wait for DMA channel to complete
+ */
+int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ int ret;
+
+ ret = mxs_dma_validate_chan(chan);
+ if (ret)
+ return ret;
+
+ if (mx28_wait_mask_set(&apbh_regs->hw_apbh_ctrl1_reg,
+ 1 << chan, timeout)) {
+ ret = -ETIMEDOUT;
+ mxs_dma_reset(chan);
+ }
+
+ return 0;
+}
+
+/*
+ * Execute the DMA channel
+ */
+int mxs_dma_go(int chan)
+{
+ uint32_t timeout = 10000;
+ int ret;
+
+ LIST_HEAD(tmp_desc_list);
+
+ mxs_dma_enable_irq(chan, 1);
+ mxs_dma_enable(chan);
+
+ /* Wait for DMA to finish. */
+ ret = mxs_dma_wait_complete(timeout, chan);
+
+ /* Clear out the descriptors we just ran. */
+ mxs_dma_finish(chan, &tmp_desc_list);
+
+ /* Shut the DMA channel down. */
+ mxs_dma_ack_irq(chan);
+ mxs_dma_reset(chan);
+ mxs_dma_enable_irq(chan, 0);
+ mxs_dma_disable(chan);
+
+ return ret;
+}
+
+/*
+ * Initialize the DMA hardware
+ */
+int mxs_dma_init(void)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ struct mxs_dma_chan *pchan;
+ int ret, channel;
+
+ mx28_reset_block(&apbh_regs->hw_apbh_ctrl0_reg);
+
+#ifdef CONFIG_APBH_DMA_BURST8
+ writel(APBH_CTRL0_AHB_BURST8_EN,
+ &apbh_regs->hw_apbh_ctrl0_set);
+#else
+ writel(APBH_CTRL0_AHB_BURST8_EN,
+ &apbh_regs->hw_apbh_ctrl0_clr);
+#endif
+
+#ifdef CONFIG_APBH_DMA_BURST
+ writel(APBH_CTRL0_APB_BURST_EN,
+ &apbh_regs->hw_apbh_ctrl0_set);
+#else
+ writel(APBH_CTRL0_APB_BURST_EN,
+ &apbh_regs->hw_apbh_ctrl0_clr);
+#endif
+
+ for (channel = 0; channel < MXS_MAX_DMA_CHANNELS; channel++) {
+ pchan = mxs_dma_channels + channel;
+ pchan->flags = MXS_DMA_FLAGS_VALID;
+
+ ret = mxs_dma_request(channel);
+
+ if (ret) {
+ printf("MXS DMA: Can't acquire DMA channel %i\n",
+ channel);
+
+ goto err;
+ }
+
+ mxs_dma_reset(channel);
+ mxs_dma_ack_irq(channel);
+ }
+
+ return 0;
+
+err:
+ while (--channel >= 0)
+ mxs_dma_release(channel);
+ return ret;
+}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 21/31] iMX28: Add BCH and GPMI register definitions
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (19 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 20/31] iMX28: Add APBH DMA driver Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 22/31] iMX28: Add GPMI NAND driver Marek Vasut
` (9 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
arch/arm/include/asm/arch-mx28/regs-bch.h | 226 ++++++++++++++++++++++++++++
arch/arm/include/asm/arch-mx28/regs-gpmi.h | 218 +++++++++++++++++++++++++++
2 files changed, 444 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/asm/arch-mx28/regs-bch.h
create mode 100644 arch/arm/include/asm/arch-mx28/regs-gpmi.h
diff --git a/arch/arm/include/asm/arch-mx28/regs-bch.h b/arch/arm/include/asm/arch-mx28/regs-bch.h
new file mode 100644
index 0000000..b788895
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-bch.h
@@ -0,0 +1,226 @@
+/*
+ * Freescale i.MX28 BCH Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_BCH_H__
+#define __REGS_BCH_H__
+
+struct mx28_bch_regs {
+ mx28_reg(hw_bch_ctrl)
+ mx28_reg(hw_bch_status0)
+ mx28_reg(hw_bch_mode)
+ mx28_reg(hw_bch_encodeptr)
+ mx28_reg(hw_bch_dataptr)
+ mx28_reg(hw_bch_metaptr)
+
+ uint32_t reserved[4];
+
+ mx28_reg(hw_bch_layoutselect)
+ mx28_reg(hw_bch_flash0layout0)
+ mx28_reg(hw_bch_flash0layout1)
+ mx28_reg(hw_bch_flash1layout0)
+ mx28_reg(hw_bch_flash1layout1)
+ mx28_reg(hw_bch_flash2layout0)
+ mx28_reg(hw_bch_flash2layout1)
+ mx28_reg(hw_bch_flash3layout0)
+ mx28_reg(hw_bch_flash3layout1)
+ mx28_reg(hw_bch_dbgkesread)
+ mx28_reg(hw_bch_dbgcsferead)
+ mx28_reg(hw_bch_dbgsyndegread)
+ mx28_reg(hw_bch_dbgahbmread)
+ mx28_reg(hw_bch_blockname)
+ mx28_reg(hw_bch_version)
+};
+
+#define BCH_CTRL_SFTRST (1 << 31)
+#define BCH_CTRL_CLKGATE (1 << 30)
+#define BCH_CTRL_DEBUGSYNDROME (1 << 22)
+#define BCH_CTRL_M2M_LAYOUT_MASK (0x3 << 18)
+#define BCH_CTRL_M2M_LAYOUT_OFFSET 18
+#define BCH_CTRL_M2M_ENCODE (1 << 17)
+#define BCH_CTRL_M2M_ENABLE (1 << 16)
+#define BCH_CTRL_DEBUG_STALL_IRQ_EN (1 << 10)
+#define BCH_CTRL_COMPLETE_IRQ_EN (1 << 8)
+#define BCH_CTRL_BM_ERROR_IRQ (1 << 3)
+#define BCH_CTRL_DEBUG_STALL_IRQ (1 << 2)
+#define BCH_CTRL_COMPLETE_IRQ (1 << 0)
+
+#define BCH_STATUS0_HANDLE_MASK (0xfff << 20)
+#define BCH_STATUS0_HANDLE_OFFSET 20
+#define BCH_STATUS0_COMPLETED_CE_MASK (0xf << 16)
+#define BCH_STATUS0_COMPLETED_CE_OFFSET 16
+#define BCH_STATUS0_STATUS_BLK0_MASK (0xff << 8)
+#define BCH_STATUS0_STATUS_BLK0_OFFSET 8
+#define BCH_STATUS0_STATUS_BLK0_ZERO (0x00 << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERROR1 (0x01 << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERROR2 (0x02 << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERROR3 (0x03 << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERROR4 (0x04 << 8)
+#define BCH_STATUS0_STATUS_BLK0_UNCORRECTABLE (0xfe << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERASED (0xff << 8)
+#define BCH_STATUS0_ALLONES (1 << 4)
+#define BCH_STATUS0_CORRECTED (1 << 3)
+#define BCH_STATUS0_UNCORRECTABLE (1 << 2)
+
+#define BCH_MODE_ERASE_THRESHOLD_MASK 0xff
+#define BCH_MODE_ERASE_THRESHOLD_OFFSET 0
+
+#define BCH_ENCODEPTR_ADDR_MASK 0xffffffff
+#define BCH_ENCODEPTR_ADDR_OFFSET 0
+
+#define BCH_DATAPTR_ADDR_MASK 0xffffffff
+#define BCH_DATAPTR_ADDR_OFFSET 0
+
+#define BCH_METAPTR_ADDR_MASK 0xffffffff
+#define BCH_METAPTR_ADDR_OFFSET 0
+
+#define BCH_LAYOUTSELECT_CS15_SELECT_MASK (0x3 << 30)
+#define BCH_LAYOUTSELECT_CS15_SELECT_OFFSET 30
+#define BCH_LAYOUTSELECT_CS14_SELECT_MASK (0x3 << 28)
+#define BCH_LAYOUTSELECT_CS14_SELECT_OFFSET 28
+#define BCH_LAYOUTSELECT_CS13_SELECT_MASK (0x3 << 26)
+#define BCH_LAYOUTSELECT_CS13_SELECT_OFFSET 26
+#define BCH_LAYOUTSELECT_CS12_SELECT_MASK (0x3 << 24)
+#define BCH_LAYOUTSELECT_CS12_SELECT_OFFSET 24
+#define BCH_LAYOUTSELECT_CS11_SELECT_MASK (0x3 << 22)
+#define BCH_LAYOUTSELECT_CS11_SELECT_OFFSET 22
+#define BCH_LAYOUTSELECT_CS10_SELECT_MASK (0x3 << 20)
+#define BCH_LAYOUTSELECT_CS10_SELECT_OFFSET 20
+#define BCH_LAYOUTSELECT_CS9_SELECT_MASK (0x3 << 18)
+#define BCH_LAYOUTSELECT_CS9_SELECT_OFFSET 18
+#define BCH_LAYOUTSELECT_CS8_SELECT_MASK (0x3 << 16)
+#define BCH_LAYOUTSELECT_CS8_SELECT_OFFSET 16
+#define BCH_LAYOUTSELECT_CS7_SELECT_MASK (0x3 << 14)
+#define BCH_LAYOUTSELECT_CS7_SELECT_OFFSET 14
+#define BCH_LAYOUTSELECT_CS6_SELECT_MASK (0x3 << 12)
+#define BCH_LAYOUTSELECT_CS6_SELECT_OFFSET 12
+#define BCH_LAYOUTSELECT_CS5_SELECT_MASK (0x3 << 10)
+#define BCH_LAYOUTSELECT_CS5_SELECT_OFFSET 10
+#define BCH_LAYOUTSELECT_CS4_SELECT_MASK (0x3 << 8)
+#define BCH_LAYOUTSELECT_CS4_SELECT_OFFSET 8
+#define BCH_LAYOUTSELECT_CS3_SELECT_MASK (0x3 << 6)
+#define BCH_LAYOUTSELECT_CS3_SELECT_OFFSET 6
+#define BCH_LAYOUTSELECT_CS2_SELECT_MASK (0x3 << 4)
+#define BCH_LAYOUTSELECT_CS2_SELECT_OFFSET 4
+#define BCH_LAYOUTSELECT_CS1_SELECT_MASK (0x3 << 2)
+#define BCH_LAYOUTSELECT_CS1_SELECT_OFFSET 2
+#define BCH_LAYOUTSELECT_CS0_SELECT_MASK (0x3 << 0)
+#define BCH_LAYOUTSELECT_CS0_SELECT_OFFSET 0
+
+#define BCH_FLASHLAYOUT0_NBLOCKS_MASK (0xff << 24)
+#define BCH_FLASHLAYOUT0_NBLOCKS_OFFSET 24
+#define BCH_FLASHLAYOUT0_META_SIZE_MASK (0xff << 16)
+#define BCH_FLASHLAYOUT0_META_SIZE_OFFSET 16
+#define BCH_FLASHLAYOUT0_ECC0_MASK (0xf << 12)
+#define BCH_FLASHLAYOUT0_ECC0_OFFSET 12
+#define BCH_FLASHLAYOUT0_ECC0_NONE (0x0 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC2 (0x1 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC4 (0x2 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC6 (0x3 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC8 (0x4 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC10 (0x5 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC12 (0x6 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC14 (0x7 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC16 (0x8 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC18 (0x9 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC20 (0xa << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC22 (0xb << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC24 (0xc << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC26 (0xd << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC28 (0xe << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC30 (0xf << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC32 (0x10 << 12)
+#define BCH_FLASHLAYOUT0_GF13_0_GF14_1 (1 << 10)
+#define BCH_FLASHLAYOUT0_DATA0_SIZE_MASK 0xfff
+#define BCH_FLASHLAYOUT0_DATA0_SIZE_OFFSET 0
+
+#define BCH_FLASHLAYOUT1_PAGE_SIZE_MASK (0xffff << 16)
+#define BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET 16
+#define BCH_FLASHLAYOUT1_ECCN_MASK (0xf << 12)
+#define BCH_FLASHLAYOUT1_ECCN_OFFSET 12
+#define BCH_FLASHLAYOUT1_ECCN_NONE (0x0 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC2 (0x1 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC4 (0x2 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC6 (0x3 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC8 (0x4 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC10 (0x5 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC12 (0x6 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC14 (0x7 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC16 (0x8 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC18 (0x9 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC20 (0xa << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC22 (0xb << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC24 (0xc << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC26 (0xd << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC28 (0xe << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC30 (0xf << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC32 (0x10 << 12)
+#define BCH_FLASHLAYOUT1_GF13_0_GF14_1 (1 << 10)
+#define BCH_FLASHLAYOUT1_DATAN_SIZE_MASK 0xfff
+#define BCH_FLASHLAYOUT1_DATAN_SIZE_OFFSET 0
+
+#define BCH_DEBUG0_RSVD1_MASK (0x1f << 27)
+#define BCH_DEBUG0_RSVD1_OFFSET 27
+#define BCH_DEBUG0_ROM_BIST_ENABLE (1 << 26)
+#define BCH_DEBUG0_ROM_BIST_COMPLETE (1 << 25)
+#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_MASK (0x1ff << 16)
+#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_OFFSET 16
+#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_NORMAL (0x0 << 16)
+#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_TEST_MODE (0x1 << 16)
+#define BCH_DEBUG0_KES_DEBUG_SHIFT_SYND (1 << 15)
+#define BCH_DEBUG0_KES_DEBUG_PAYLOAD_FLAG (1 << 14)
+#define BCH_DEBUG0_KES_DEBUG_MODE4K (1 << 13)
+#define BCH_DEBUG0_KES_DEBUG_KICK (1 << 12)
+#define BCH_DEBUG0_KES_STANDALONE (1 << 11)
+#define BCH_DEBUG0_KES_DEBUG_STEP (1 << 10)
+#define BCH_DEBUG0_KES_DEBUG_STALL (1 << 9)
+#define BCH_DEBUG0_BM_KES_TEST_BYPASS (1 << 8)
+#define BCH_DEBUG0_RSVD0_MASK (0x3 << 6)
+#define BCH_DEBUG0_RSVD0_OFFSET 6
+#define BCH_DEBUG0_DEBUG_REG_SELECT_MASK 0x3f
+#define BCH_DEBUG0_DEBUG_REG_SELECT_OFFSET 0
+
+#define BCH_DBGKESREAD_VALUES_MASK 0xffffffff
+#define BCH_DBGKESREAD_VALUES_OFFSET 0
+
+#define BCH_DBGCSFEREAD_VALUES_MASK 0xffffffff
+#define BCH_DBGCSFEREAD_VALUES_OFFSET 0
+
+#define BCH_DBGSYNDGENREAD_VALUES_MASK 0xffffffff
+#define BCH_DBGSYNDGENREAD_VALUES_OFFSET 0
+
+#define BCH_DBGAHBMREAD_VALUES_MASK 0xffffffff
+#define BCH_DBGAHBMREAD_VALUES_OFFSET 0
+
+#define BCH_BLOCKNAME_NAME_MASK 0xffffffff
+#define BCH_BLOCKNAME_NAME_OFFSET 0
+
+#define BCH_VERSION_MAJOR_MASK (0xff << 24)
+#define BCH_VERSION_MAJOR_OFFSET 24
+#define BCH_VERSION_MINOR_MASK (0xff << 16)
+#define BCH_VERSION_MINOR_OFFSET 16
+#define BCH_VERSION_STEP_MASK 0xffff
+#define BCH_VERSION_STEP_OFFSET 0
+
+#endif /* __REGS_BCH_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-gpmi.h b/arch/arm/include/asm/arch-mx28/regs-gpmi.h
new file mode 100644
index 0000000..ae56cd6
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-gpmi.h
@@ -0,0 +1,218 @@
+/*
+ * Freescale i.MX28 GPMI Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_GPMI_H__
+#define __REGS_GPMI_H__
+
+struct mx28_gpmi_regs {
+ mx28_reg(hw_gpmi_ctrl0)
+ mx28_reg(hw_gpmi_compare)
+ mx28_reg(hw_gpmi_eccctrl)
+ mx28_reg(hw_gpmi_ecccount)
+ mx28_reg(hw_gpmi_payload)
+ mx28_reg(hw_gpmi_auxiliary)
+ mx28_reg(hw_gpmi_ctrl1)
+ mx28_reg(hw_gpmi_timing0)
+ mx28_reg(hw_gpmi_timing1)
+
+ uint32_t reserved[4];
+
+ mx28_reg(hw_gpmi_data)
+ mx28_reg(hw_gpmi_stat)
+ mx28_reg(hw_gpmi_debug)
+ mx28_reg(hw_gpmi_version)
+};
+
+#define GPMI_CTRL0_SFTRST (1 << 31)
+#define GPMI_CTRL0_CLKGATE (1 << 30)
+#define GPMI_CTRL0_RUN (1 << 29)
+#define GPMI_CTRL0_DEV_IRQ_EN (1 << 28)
+#define GPMI_CTRL0_LOCK_CS (1 << 27)
+#define GPMI_CTRL0_UDMA (1 << 26)
+#define GPMI_CTRL0_COMMAND_MODE_MASK (0x3 << 24)
+#define GPMI_CTRL0_COMMAND_MODE_OFFSET 24
+#define GPMI_CTRL0_COMMAND_MODE_WRITE (0x0 << 24)
+#define GPMI_CTRL0_COMMAND_MODE_READ (0x1 << 24)
+#define GPMI_CTRL0_COMMAND_MODE_READ_AND_COMPARE (0x2 << 24)
+#define GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY (0x3 << 24)
+#define GPMI_CTRL0_WORD_LENGTH (1 << 23)
+#define GPMI_CTRL0_CS_MASK (0x7 << 20)
+#define GPMI_CTRL0_CS_OFFSET 20
+#define GPMI_CTRL0_ADDRESS_MASK (0x7 << 17)
+#define GPMI_CTRL0_ADDRESS_OFFSET 17
+#define GPMI_CTRL0_ADDRESS_NAND_DATA (0x0 << 17)
+#define GPMI_CTRL0_ADDRESS_NAND_CLE (0x1 << 17)
+#define GPMI_CTRL0_ADDRESS_NAND_ALE (0x2 << 17)
+#define GPMI_CTRL0_ADDRESS_INCREMENT (1 << 16)
+#define GPMI_CTRL0_XFER_COUNT_MASK 0xffff
+#define GPMI_CTRL0_XFER_COUNT_OFFSET 0
+
+#define GPMI_COMPARE_MASK_MASK (0xffff << 16)
+#define GPMI_COMPARE_MASK_OFFSET 16
+#define GPMI_COMPARE_REFERENCE_MASK 0xffff
+#define GPMI_COMPARE_REFERENCE_OFFSET 0
+
+#define GPMI_ECCCTRL_HANDLE_MASK (0xffff << 16)
+#define GPMI_ECCCTRL_HANDLE_OFFSET 16
+#define GPMI_ECCCTRL_ECC_CMD_MASK (0x3 << 13)
+#define GPMI_ECCCTRL_ECC_CMD_OFFSET 13
+#define GPMI_ECCCTRL_ECC_CMD_DECODE (0x0 << 13)
+#define GPMI_ECCCTRL_ECC_CMD_ENCODE (0x1 << 13)
+#define GPMI_ECCCTRL_ENABLE_ECC (1 << 12)
+#define GPMI_ECCCTRL_BUFFER_MASK_MASK 0x1ff
+#define GPMI_ECCCTRL_BUFFER_MASK_OFFSET 0
+#define GPMI_ECCCTRL_BUFFER_MASK_BCH_AUXONLY 0x100
+#define GPMI_ECCCTRL_BUFFER_MASK_BCH_PAGE 0x1ff
+
+#define GPMI_ECCCOUNT_COUNT_MASK 0xffff
+#define GPMI_ECCCOUNT_COUNT_OFFSET 0
+
+#define GPMI_PAYLOAD_ADDRESS_MASK (0x3fffffff << 2)
+#define GPMI_PAYLOAD_ADDRESS_OFFSET 2
+
+#define GPMI_AUXILIARY_ADDRESS_MASK (0x3fffffff << 2)
+#define GPMI_AUXILIARY_ADDRESS_OFFSET 2
+
+#define GPMI_CTRL1_DECOUPLE_CS (1 << 24)
+#define GPMI_CTRL1_WRN_DLY_SEL_MASK (0x3 << 22)
+#define GPMI_CTRL1_WRN_DLY_SEL_OFFSET 22
+#define GPMI_CTRL1_TIMEOUT_IRQ_EN (1 << 20)
+#define GPMI_CTRL1_GANGED_RDYBUSY (1 << 19)
+#define GPMI_CTRL1_BCH_MODE (1 << 18)
+#define GPMI_CTRL1_DLL_ENABLE (1 << 17)
+#define GPMI_CTRL1_HALF_PERIOD (1 << 16)
+#define GPMI_CTRL1_RDN_DELAY_MASK (0xf << 12)
+#define GPMI_CTRL1_RDN_DELAY_OFFSET 12
+#define GPMI_CTRL1_DMA2ECC_MODE (1 << 11)
+#define GPMI_CTRL1_DEV_IRQ (1 << 10)
+#define GPMI_CTRL1_TIMEOUT_IRQ (1 << 9)
+#define GPMI_CTRL1_BURST_EN (1 << 8)
+#define GPMI_CTRL1_ABORT_WAIT_REQUEST (1 << 7)
+#define GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL_MASK (0x7 << 4)
+#define GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL_OFFSET 4
+#define GPMI_CTRL1_DEV_RESET (1 << 3)
+#define GPMI_CTRL1_ATA_IRQRDY_POLARITY (1 << 2)
+#define GPMI_CTRL1_CAMERA_MODE (1 << 1)
+#define GPMI_CTRL1_GPMI_MODE (1 << 0)
+
+#define GPMI_TIMING0_ADDRESS_SETUP_MASK (0xff << 16)
+#define GPMI_TIMING0_ADDRESS_SETUP_OFFSET 16
+#define GPMI_TIMING0_DATA_HOLD_MASK (0xff << 8)
+#define GPMI_TIMING0_DATA_HOLD_OFFSET 8
+#define GPMI_TIMING0_DATA_SETUP_MASK 0xff
+#define GPMI_TIMING0_DATA_SETUP_OFFSET 0
+
+#define GPMI_TIMING1_DEVICE_BUSY_TIMEOUT_MASK (0xffff << 16)
+#define GPMI_TIMING1_DEVICE_BUSY_TIMEOUT_OFFSET 16
+
+#define GPMI_TIMING2_UDMA_TRP_MASK (0xff << 24)
+#define GPMI_TIMING2_UDMA_TRP_OFFSET 24
+#define GPMI_TIMING2_UDMA_ENV_MASK (0xff << 16)
+#define GPMI_TIMING2_UDMA_ENV_OFFSET 16
+#define GPMI_TIMING2_UDMA_HOLD_MASK (0xff << 8)
+#define GPMI_TIMING2_UDMA_HOLD_OFFSET 8
+#define GPMI_TIMING2_UDMA_SETUP_MASK 0xff
+#define GPMI_TIMING2_UDMA_SETUP_OFFSET 0
+
+#define GPMI_DATA_DATA_MASK 0xffffffff
+#define GPMI_DATA_DATA_OFFSET 0
+
+#define GPMI_STAT_READY_BUSY_MASK (0xff << 24)
+#define GPMI_STAT_READY_BUSY_OFFSET 24
+#define GPMI_STAT_RDY_TIMEOUT_MASK (0xff << 16)
+#define GPMI_STAT_RDY_TIMEOUT_OFFSET 16
+#define GPMI_STAT_DEV7_ERROR (1 << 15)
+#define GPMI_STAT_DEV6_ERROR (1 << 14)
+#define GPMI_STAT_DEV5_ERROR (1 << 13)
+#define GPMI_STAT_DEV4_ERROR (1 << 12)
+#define GPMI_STAT_DEV3_ERROR (1 << 11)
+#define GPMI_STAT_DEV2_ERROR (1 << 10)
+#define GPMI_STAT_DEV1_ERROR (1 << 9)
+#define GPMI_STAT_DEV0_ERROR (1 << 8)
+#define GPMI_STAT_ATA_IRQ (1 << 4)
+#define GPMI_STAT_INVALID_BUFFER_MASK (1 << 3)
+#define GPMI_STAT_FIFO_EMPTY (1 << 2)
+#define GPMI_STAT_FIFO_FULL (1 << 1)
+#define GPMI_STAT_PRESENT (1 << 0)
+
+#define GPMI_DEBUG_WAIT_FOR_READY_END_MASK (0xff << 24)
+#define GPMI_DEBUG_WAIT_FOR_READY_END_OFFSET 24
+#define GPMI_DEBUG_DMA_SENSE_MASK (0xff << 16)
+#define GPMI_DEBUG_DMA_SENSE_OFFSET 16
+#define GPMI_DEBUG_DMAREQ_MASK (0xff << 8)
+#define GPMI_DEBUG_DMAREQ_OFFSET 8
+#define GPMI_DEBUG_CMD_END_MASK 0xff
+#define GPMI_DEBUG_CMD_END_OFFSET 0
+
+#define GPMI_VERSION_MAJOR_MASK (0xff << 24)
+#define GPMI_VERSION_MAJOR_OFFSET 24
+#define GPMI_VERSION_MINOR_MASK (0xff << 16)
+#define GPMI_VERSION_MINOR_OFFSET 16
+#define GPMI_VERSION_STEP_MASK 0xffff
+#define GPMI_VERSION_STEP_OFFSET 0
+
+#define GPMI_DEBUG2_UDMA_STATE_MASK (0xf << 24)
+#define GPMI_DEBUG2_UDMA_STATE_OFFSET 24
+#define GPMI_DEBUG2_BUSY (1 << 23)
+#define GPMI_DEBUG2_PIN_STATE_MASK (0x7 << 20)
+#define GPMI_DEBUG2_PIN_STATE_OFFSET 20
+#define GPMI_DEBUG2_PIN_STATE_PSM_IDLE (0x0 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_BYTCNT (0x1 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_ADDR (0x2 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_STALL (0x3 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_STROBE (0x4 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_ATARDY (0x5 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_DHOLD (0x6 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_DONE (0x7 << 20)
+#define GPMI_DEBUG2_MAIN_STATE_MASK (0xf << 16)
+#define GPMI_DEBUG2_MAIN_STATE_OFFSET 16
+#define GPMI_DEBUG2_MAIN_STATE_MSM_IDLE (0x0 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_BYTCNT (0x1 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFE (0x2 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFR (0x3 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_DMAREQ (0x4 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_DMAACK (0x5 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFF (0x6 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_LDFIFO (0x7 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_LDDMAR (0x8 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_RDCMP (0x9 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_DONE (0xa << 16)
+#define GPMI_DEBUG2_SYND2GPMI_BE_MASK (0xf << 12)
+#define GPMI_DEBUG2_SYND2GPMI_BE_OFFSET 12
+#define GPMI_DEBUG2_GPMI2SYND_VALID (1 << 11)
+#define GPMI_DEBUG2_GPMI2SYND_READY (1 << 10)
+#define GPMI_DEBUG2_SYND2GPMI_VALID (1 << 9)
+#define GPMI_DEBUG2_SYND2GPMI_READY (1 << 8)
+#define GPMI_DEBUG2_VIEW_DELAYED_RDN (1 << 7)
+#define GPMI_DEBUG2_UPDATE_WINDOW (1 << 6)
+#define GPMI_DEBUG2_RDN_TAP_MASK 0x3f
+#define GPMI_DEBUG2_RDN_TAP_OFFSET 0
+
+#define GPMI_DEBUG3_APB_WORD_CNTR_MASK (0xffff << 16)
+#define GPMI_DEBUG3_APB_WORD_CNTR_OFFSET 16
+#define GPMI_DEBUG3_DEV_WORD_CNTR_MASK 0xffff
+#define GPMI_DEBUG3_DEV_WORD_CNTR_OFFSET 0
+
+#endif /* __REGS_GPMI_H__ */
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 22/31] iMX28: Add GPMI NAND driver
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (20 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 21/31] iMX28: Add BCH and GPMI register definitions Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 23/31] M28: Enable NAND Marek Vasut
` (8 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/mxs_nand.c | 1163 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 1164 insertions(+), 0 deletions(-)
create mode 100644 drivers/mtd/nand/mxs_nand.c
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 8b598f6..8b6e8bf 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -43,6 +43,7 @@ COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
COBJS-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
COBJS-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o
COBJS-$(CONFIG_NAND_MXC) += mxc_nand.o
+COBJS-$(CONFIG_NAND_MXS) += mxs_nand.o
COBJS-$(CONFIG_NAND_NDFC) += ndfc.o
COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o
COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
new file mode 100644
index 0000000..4995e0b
--- /dev/null
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -0,0 +1,1163 @@
+/*
+ * Freescale i.MX28 NAND flash driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Freescale GPMI NFC NAND Flash Driver
+ *
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/types.h>
+#include <common.h>
+#include <malloc.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-apbh.h>
+#include <asm/arch/regs-bch.h>
+#include <asm/arch/regs-gpmi.h>
+#include <asm/arch/mx28.h>
+#include <asm/arch/dma.h>
+
+#define MXS_NAND_DMA_DESCRIPTOR_COUNT 4
+
+#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE 512
+#define MXS_NAND_METADATA_SIZE 10
+
+#define MXS_NAND_COMMAND_BUFFER_SIZE 32
+
+#define MXS_NAND_BCH_TIMEOUT 10000
+
+struct mxs_nand_info {
+ int cur_chip;
+
+ uint32_t cmd_queue_len;
+
+ uint8_t *cmd_buf;
+ uint8_t *data_buf;
+ uint8_t *oob_buf;
+
+ uint8_t marking_block_bad;
+ uint8_t raw_oob_mode;
+
+ /* Functions with altered behaviour */
+ int (*hooked_read_oob)(struct mtd_info *mtd,
+ loff_t from, struct mtd_oob_ops *ops);
+ int (*hooked_write_oob)(struct mtd_info *mtd,
+ loff_t to, struct mtd_oob_ops *ops);
+ int (*hooked_block_markbad)(struct mtd_info *mtd,
+ loff_t ofs);
+
+ /* DMA descriptors */
+ struct mxs_dma_desc **desc;
+ uint32_t desc_index;
+};
+
+struct nand_ecclayout fake_ecc_layout;
+
+static struct mxs_dma_desc *mxs_nand_get_dma_desc(struct mxs_nand_info *info)
+{
+ struct mxs_dma_desc *desc;
+
+ if (info->desc_index >= MXS_NAND_DMA_DESCRIPTOR_COUNT) {
+ printf("MXS NAND: Too many DMA descriptors requested\n");
+ return NULL;
+ }
+
+ desc = info->desc[info->desc_index];
+ info->desc_index++;
+
+ return desc;
+}
+
+static void mxs_nand_return_dma_descs(struct mxs_nand_info *info)
+{
+ int i = info->desc_index;
+ struct mxs_dma_desc *desc;
+
+ for (--i; i >= 0; i--) {
+ desc = info->desc[i];
+ memset(desc, 0, sizeof(struct mxs_dma_desc));
+ desc->address = (dma_addr_t)desc;
+ }
+
+ info->desc_index = 0;
+}
+
+static inline uint32_t mxs_nand_ecc_chunk_cnt(uint32_t page_data_size)
+{
+ return page_data_size / MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+}
+
+static inline uint32_t mxs_nand_ecc_size_in_bits(uint32_t ecc_strength)
+{
+ return ecc_strength * 13;
+}
+
+static inline uint32_t mxs_nand_aux_status_offset(void)
+{
+ return (MXS_NAND_METADATA_SIZE + 0x3) & ~0x3;
+}
+
+static inline uint32_t mxs_nand_aux_size(uint32_t page_size)
+{
+ uint32_t aux_status_off = mxs_nand_aux_status_offset();
+ uint32_t ecc_chunk_cnt =
+ (mxs_nand_ecc_chunk_cnt(page_size) + 0x3) & ~0x3;
+
+ return ecc_chunk_cnt + aux_status_off;
+}
+
+static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size,
+ uint32_t page_oob_size)
+{
+ if (page_data_size == 2048)
+ return 8;
+
+ if (page_data_size == 4096) {
+ if (page_oob_size == 128)
+ return 8;
+
+ if (page_oob_size == 218)
+ return 16;
+ }
+
+ return 0;
+}
+
+static inline uint32_t mxs_nand_get_mark_offset(uint32_t page_data_size,
+ uint32_t ecc_strength)
+{
+ uint32_t chunk_data_size_in_bits;
+ uint32_t chunk_ecc_size_in_bits;
+ uint32_t chunk_total_size_in_bits;
+ uint32_t block_mark_chunk_number;
+ uint32_t block_mark_chunk_bit_offset;
+ uint32_t block_mark_bit_offset;
+
+ chunk_data_size_in_bits = MXS_NAND_CHUNK_DATA_CHUNK_SIZE * 8;
+ chunk_ecc_size_in_bits = mxs_nand_ecc_size_in_bits(ecc_strength);
+
+ chunk_total_size_in_bits =
+ chunk_data_size_in_bits + chunk_ecc_size_in_bits;
+
+ /* Compute the bit offset of the block mark within the physical page. */
+ block_mark_bit_offset = page_data_size * 8;
+
+ /* Subtract the metadata bits. */
+ block_mark_bit_offset -= MXS_NAND_METADATA_SIZE * 8;
+
+ /*
+ * Compute the chunk number (starting at zero) in which the block mark
+ * appears.
+ */
+ block_mark_chunk_number =
+ block_mark_bit_offset / chunk_total_size_in_bits;
+
+ /*
+ * Compute the bit offset of the block mark within its chunk, and
+ * validate it.
+ */
+ block_mark_chunk_bit_offset = block_mark_bit_offset -
+ (block_mark_chunk_number * chunk_total_size_in_bits);
+
+ if (block_mark_chunk_bit_offset > chunk_data_size_in_bits)
+ return 1;
+
+ /*
+ * Now that we know the chunk number in which the block mark appears,
+ * we can subtract all the ECC bits that appear before it.
+ */
+ block_mark_bit_offset -=
+ block_mark_chunk_number * chunk_ecc_size_in_bits;
+
+ return block_mark_bit_offset;
+}
+
+static inline uint32_t mxs_nand_mark_byte_offset(struct mtd_info *mtd)
+{
+ uint32_t ecc_strength;
+ ecc_strength = mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize);
+ return mxs_nand_get_mark_offset(mtd->writesize, ecc_strength) >> 3;
+}
+
+static inline uint32_t mxs_nand_mark_bit_offset(struct mtd_info *mtd)
+{
+ uint32_t ecc_strength;
+ ecc_strength = mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize);
+ return mxs_nand_get_mark_offset(mtd->writesize, ecc_strength) & 0x7;
+}
+
+/*
+ * Wait for BCH complete IRQ and clear the IRQ
+ */
+static int mxs_nand_wait_for_bch_complete(void)
+{
+ struct mx28_bch_regs *bch_regs = (struct mx28_bch_regs *)MXS_BCH_BASE;
+ int timeout = MXS_NAND_BCH_TIMEOUT;
+ int ret;
+
+ ret = mx28_wait_mask_set(&bch_regs->hw_bch_ctrl_reg,
+ BCH_CTRL_COMPLETE_IRQ, timeout);
+
+ writel(BCH_CTRL_COMPLETE_IRQ, &bch_regs->hw_bch_ctrl_clr);
+
+ return ret;
+}
+
+/*
+ * This is the function that we install in the cmd_ctrl function pointer of the
+ * owning struct nand_chip. The only functions in the reference implementation
+ * that use these functions pointers are cmdfunc and select_chip.
+ *
+ * In this driver, we implement our own select_chip, so this function will only
+ * be called by the reference implementation's cmdfunc. For this reason, we can
+ * ignore the chip enable bit and concentrate only on sending bytes to the
+ * NAND Flash.
+ */
+static void mxs_nand_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mxs_nand_info *nand_info = nand->priv;
+ struct mxs_dma_desc *d;
+ uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
+ int ret;
+
+ /*
+ * If this condition is true, something is _VERY_ wrong in MTD
+ * subsystem!
+ */
+ if (nand_info->cmd_queue_len == MXS_NAND_COMMAND_BUFFER_SIZE) {
+ printf("MXS NAND: Command queue too long\n");
+ return;
+ }
+
+ /*
+ * Every operation begins with a command byte and a series of zero or
+ * more address bytes. These are distinguished by either the Address
+ * Latch Enable (ALE) or Command Latch Enable (CLE) signals being
+ * asserted. When MTD is ready to execute the command, it will
+ * deasert both latch enables.
+ *
+ * Rather than run a separate DMA operation for every single byte, we
+ * queue them up and run a single DMA operation for the entire series
+ * of command and data bytes.
+ */
+ if (ctrl & (NAND_ALE | NAND_CLE)) {
+ if (data != NAND_CMD_NONE)
+ nand_info->cmd_buf[nand_info->cmd_queue_len++] = data;
+ return;
+ }
+
+ /*
+ * If control arrives here, MTD has deasserted both the ALE and CLE,
+ * which means it's ready to run an operation. Check if we have any
+ * bytes to send.
+ */
+ if (nand_info->cmd_queue_len == 0)
+ return;
+
+ /* Compile the DMA descriptor -- a descriptor that sends command. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ |
+ MXS_DMA_DESC_CHAIN | MXS_DMA_DESC_DEC_SEM |
+ MXS_DMA_DESC_WAIT4END | (3 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+ (nand_info->cmd_queue_len << MXS_DMA_DESC_BYTES_OFFSET);
+
+ d->cmd.address = (dma_addr_t)nand_info->cmd_buf;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_WRITE |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_CLE |
+ GPMI_CTRL0_ADDRESS_INCREMENT |
+ nand_info->cmd_queue_len;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Execute the DMA chain. */
+ ret = mxs_dma_go(channel);
+ if (ret)
+ printf("MXS NAND: Error sending command\n");
+
+ mxs_nand_return_dma_descs(nand_info);
+
+ /* Reset the command queue. */
+ nand_info->cmd_queue_len = 0;
+}
+
+/*
+ * Test if the NAND flash is ready.
+ */
+static int mxs_nand_device_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mxs_nand_info *nand_info = chip->priv;
+ struct mx28_gpmi_regs *gpmi_regs =
+ (struct mx28_gpmi_regs *)MXS_GPMI_BASE;
+ uint32_t tmp;
+
+ tmp = readl(&gpmi_regs->hw_gpmi_stat);
+ tmp >>= (GPMI_STAT_READY_BUSY_OFFSET + nand_info->cur_chip);
+
+ return tmp & 1;
+}
+
+/*
+ * Select the NAND chip.
+ */
+static void mxs_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mxs_nand_info *nand_info = nand->priv;
+
+ nand_info->cur_chip = chip;
+}
+
+/*
+ * Handle block mark swapping.
+ *
+ * Note that, when this function is called, it doesn't know whether it's
+ * swapping the block mark, or swapping it *back* -- but it doesn't matter
+ * because the the operation is the same.
+ */
+static void mxs_nand_swap_block_mark(struct mtd_info *mtd,
+ uint8_t *data_buf, uint8_t *oob_buf)
+{
+ uint32_t bit_offset;
+ uint32_t buf_offset;
+
+ uint32_t src;
+ uint32_t dst;
+
+ bit_offset = mxs_nand_mark_bit_offset(mtd);
+ buf_offset = mxs_nand_mark_byte_offset(mtd);
+
+ /*
+ * Get the byte from the data area that overlays the block mark. Since
+ * the ECC engine applies its own view to the bits in the page, the
+ * physical block mark won't (in general) appear on a byte boundary in
+ * the data.
+ */
+ src = data_buf[buf_offset] >> bit_offset;
+ src |= data_buf[buf_offset + 1] << (8 - bit_offset);
+
+ dst = oob_buf[0];
+
+ oob_buf[0] = src;
+
+ data_buf[buf_offset] &= ~(0xff << bit_offset);
+ data_buf[buf_offset + 1] &= 0xff << bit_offset;
+
+ data_buf[buf_offset] |= dst << bit_offset;
+ data_buf[buf_offset + 1] |= dst >> (8 - bit_offset);
+}
+
+/*
+ * Read data from NAND.
+ */
+static void mxs_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int length)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mxs_nand_info *nand_info = nand->priv;
+ struct mxs_dma_desc *d;
+ uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
+ int ret;
+
+ if (length > NAND_MAX_PAGESIZE) {
+ printf("MXS NAND: DMA buffer too big\n");
+ return;
+ }
+
+ if (!buf) {
+ printf("MXS NAND: DMA buffer is NULL\n");
+ return;
+ }
+
+ /* Compile the DMA descriptor - a descriptor that reads data. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_DMA_WRITE | MXS_DMA_DESC_IRQ |
+ MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END |
+ (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+ (length << MXS_DMA_DESC_BYTES_OFFSET);
+
+ d->cmd.address = (dma_addr_t)nand_info->data_buf;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_READ |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_DATA |
+ length;
+
+ mxs_dma_desc_append(channel, d);
+
+ /*
+ * A DMA descriptor that waits for the command to end and the chip to
+ * become ready.
+ *
+ * I think we actually should *not* be waiting for the chip to become
+ * ready because, after all, we don't care. I think the original code
+ * did that and no one has re-thought it yet.
+ */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ |
+ MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_DEC_SEM |
+ MXS_DMA_DESC_WAIT4END | (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+
+ d->cmd.address = 0;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_DATA;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Execute the DMA chain. */
+ ret = mxs_dma_go(channel);
+ if (ret) {
+ printf("MXS NAND: DMA read error\n");
+ goto rtn;
+ }
+
+ memcpy(buf, nand_info->data_buf, length);
+
+rtn:
+ mxs_nand_return_dma_descs(nand_info);
+}
+
+/*
+ * Write data to NAND.
+ */
+static void mxs_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf,
+ int length)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mxs_nand_info *nand_info = nand->priv;
+ struct mxs_dma_desc *d;
+ uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
+ int ret;
+
+ if (length > NAND_MAX_PAGESIZE) {
+ printf("MXS NAND: DMA buffer too big\n");
+ return;
+ }
+
+ if (!buf) {
+ printf("MXS NAND: DMA buffer is NULL\n");
+ return;
+ }
+
+ memcpy(nand_info->data_buf, buf, length);
+
+ /* Compile the DMA descriptor - a descriptor that writes data. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ |
+ MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END |
+ (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+ (length << MXS_DMA_DESC_BYTES_OFFSET);
+
+ d->cmd.address = (dma_addr_t)nand_info->data_buf;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_WRITE |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_DATA |
+ length;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Execute the DMA chain. */
+ ret = mxs_dma_go(channel);
+ if (ret)
+ printf("MXS NAND: DMA write error\n");
+
+ mxs_nand_return_dma_descs(nand_info);
+}
+
+/*
+ * Read a single byte from NAND.
+ */
+static uint8_t mxs_nand_read_byte(struct mtd_info *mtd)
+{
+ uint8_t buf;
+ mxs_nand_read_buf(mtd, &buf, 1);
+ return buf;
+}
+
+/*
+ * Read a page from NAND.
+ */
+static int mxs_nand_ecc_read_page(struct mtd_info *mtd, struct nand_chip *nand,
+ uint8_t *buf, int page)
+{
+ struct mxs_nand_info *nand_info = nand->priv;
+ struct mxs_dma_desc *d;
+ uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
+ uint32_t corrected = 0, failed = 0;
+ uint8_t *status;
+ int i, ret;
+
+ /* Compile the DMA descriptor - wait for ready. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN |
+ MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_WAIT4END |
+ (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+
+ d->cmd.address = 0;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_DATA;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Compile the DMA descriptor - enable the BCH block and read. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN |
+ MXS_DMA_DESC_WAIT4END | (6 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+
+ d->cmd.address = 0;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_READ |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_DATA |
+ (mtd->writesize + mtd->oobsize);
+ d->cmd.pio_words[1] = 0;
+ d->cmd.pio_words[2] =
+ GPMI_ECCCTRL_ENABLE_ECC |
+ GPMI_ECCCTRL_ECC_CMD_DECODE |
+ GPMI_ECCCTRL_BUFFER_MASK_BCH_PAGE;
+ d->cmd.pio_words[3] = mtd->writesize + mtd->oobsize;
+ d->cmd.pio_words[4] = (dma_addr_t)nand_info->data_buf;
+ d->cmd.pio_words[5] = (dma_addr_t)nand_info->oob_buf;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Compile the DMA descriptor - disable the BCH block. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN |
+ MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_WAIT4END |
+ (3 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+
+ d->cmd.address = 0;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_DATA |
+ (mtd->writesize + mtd->oobsize);
+ d->cmd.pio_words[1] = 0;
+ d->cmd.pio_words[2] = 0;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Compile the DMA descriptor - deassert the NAND lock and interrupt. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ |
+ MXS_DMA_DESC_DEC_SEM;
+
+ d->cmd.address = 0;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Execute the DMA chain. */
+ ret = mxs_dma_go(channel);
+ if (ret) {
+ printf("MXS NAND: DMA read error\n");
+ goto rtn;
+ }
+
+ ret = mxs_nand_wait_for_bch_complete();
+ if (ret) {
+ printf("MXS NAND: BCH read timeout\n");
+ goto rtn;
+ }
+
+ /* Read DMA completed, now do the mark swapping. */
+ mxs_nand_swap_block_mark(mtd, nand_info->data_buf, nand_info->oob_buf);
+
+ /* Loop over status bytes, accumulating ECC status. */
+ status = nand_info->oob_buf + mxs_nand_aux_status_offset();
+ for (i = 0; i < mxs_nand_ecc_chunk_cnt(mtd->writesize); i++) {
+ if (status[i] == 0x00)
+ continue;
+
+ if (status[i] == 0xff)
+ continue;
+
+ if (status[i] == 0xfe) {
+ failed++;
+ continue;
+ }
+
+ corrected += status[i];
+ }
+
+ /* Propagate ECC status to the owning MTD. */
+ mtd->ecc_stats.failed += failed;
+ mtd->ecc_stats.corrected += corrected;
+
+ /*
+ * It's time to deliver the OOB bytes. See mxs_nand_ecc_read_oob() for
+ * details about our policy for delivering the OOB.
+ *
+ * We fill the caller's buffer with set bits, and then copy the block
+ * mark to th caller's buffer. Note that, if block mark swapping was
+ * necessary, it has already been done, so we can rely on the first
+ * byte of the auxiliary buffer to contain the block mark.
+ */
+ memset(nand->oob_poi, 0xff, mtd->oobsize);
+
+ nand->oob_poi[0] = nand_info->oob_buf[0];
+
+ memcpy(buf, nand_info->data_buf, mtd->writesize);
+
+rtn:
+ mxs_nand_return_dma_descs(nand_info);
+
+ return ret;
+}
+
+/*
+ * Write a page to NAND.
+ */
+static void mxs_nand_ecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *nand, const uint8_t *buf)
+{
+ struct mxs_nand_info *nand_info = nand->priv;
+ struct mxs_dma_desc *d;
+ uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
+ int ret;
+
+ memcpy(nand_info->data_buf, buf, mtd->writesize);
+ memcpy(nand_info->oob_buf, nand->oob_poi, mtd->oobsize);
+
+ /* Handle block mark swapping. */
+ mxs_nand_swap_block_mark(mtd, nand_info->data_buf, nand_info->oob_buf);
+
+ /* Compile the DMA descriptor - write data. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ |
+ MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END |
+ (6 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+
+ d->cmd.address = 0;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_WRITE |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_DATA;
+ d->cmd.pio_words[1] = 0;
+ d->cmd.pio_words[2] =
+ GPMI_ECCCTRL_ENABLE_ECC |
+ GPMI_ECCCTRL_ECC_CMD_ENCODE |
+ GPMI_ECCCTRL_BUFFER_MASK_BCH_PAGE;
+ d->cmd.pio_words[3] = (mtd->writesize + mtd->oobsize);
+ d->cmd.pio_words[4] = (dma_addr_t)nand_info->data_buf;
+ d->cmd.pio_words[5] = (dma_addr_t)nand_info->oob_buf;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Execute the DMA chain. */
+ ret = mxs_dma_go(channel);
+ if (ret) {
+ printf("MXS NAND: DMA write error\n");
+ goto rtn;
+ }
+
+ ret = mxs_nand_wait_for_bch_complete();
+ if (ret) {
+ printf("MXS NAND: BCH write timeout\n");
+ goto rtn;
+ }
+
+rtn:
+ mxs_nand_return_dma_descs(nand_info);
+}
+
+/*
+ * Read OOB from NAND.
+ *
+ * This function is a veneer that replaces the function originally installed by
+ * the NAND Flash MTD code.
+ */
+static int mxs_nand_hook_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mxs_nand_info *nand_info = chip->priv;
+ int ret;
+
+ if (ops->mode == MTD_OOB_RAW)
+ nand_info->raw_oob_mode = 1;
+ else
+ nand_info->raw_oob_mode = 0;
+
+ ret = nand_info->hooked_read_oob(mtd, from, ops);
+
+ nand_info->raw_oob_mode = 0;
+
+ return ret;
+}
+
+/*
+ * Write OOB to NAND.
+ *
+ * This function is a veneer that replaces the function originally installed by
+ * the NAND Flash MTD code.
+ */
+static int mxs_nand_hook_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mxs_nand_info *nand_info = chip->priv;
+ int ret;
+
+ if (ops->mode == MTD_OOB_RAW)
+ nand_info->raw_oob_mode = 1;
+ else
+ nand_info->raw_oob_mode = 0;
+
+ ret = nand_info->hooked_write_oob(mtd, to, ops);
+
+ nand_info->raw_oob_mode = 0;
+
+ return ret;
+}
+
+/*
+ * Mark a block bad in NAND.
+ *
+ * This function is a veneer that replaces the function originally installed by
+ * the NAND Flash MTD code.
+ */
+static int mxs_nand_hook_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mxs_nand_info *nand_info = chip->priv;
+ int ret;
+
+ nand_info->marking_block_bad = 1;
+
+ ret = nand_info->hooked_block_markbad(mtd, ofs);
+
+ nand_info->marking_block_bad = 0;
+
+ return ret;
+}
+
+/*
+ * There are several places in this driver where we have to handle the OOB and
+ * block marks. This is the function where things are the most complicated, so
+ * this is where we try to explain it all. All the other places refer back to
+ * here.
+ *
+ * These are the rules, in order of decreasing importance:
+ *
+ * 1) Nothing the caller does can be allowed to imperil the block mark, so all
+ * write operations take measures to protect it.
+ *
+ * 2) In read operations, the first byte of the OOB we return must reflect the
+ * true state of the block mark, no matter where that block mark appears in
+ * the physical page.
+ *
+ * 3) ECC-based read operations return an OOB full of set bits (since we never
+ * allow ECC-based writes to the OOB, it doesn't matter what ECC-based reads
+ * return).
+ *
+ * 4) "Raw" read operations return a direct view of the physical bytes in the
+ * page, using the conventional definition of which bytes are data and which
+ * are OOB. This gives the caller a way to see the actual, physical bytes
+ * in the page, without the distortions applied by our ECC engine.
+ *
+ *
+ * What we do for this specific read operation depends on two questions:
+ *
+ * 1) Are we doing a "raw" read, or an ECC-based read?
+ *
+ * 2) Are we using block mark swapping or transcription?
+ *
+ * There are four cases, illustrated by the following Karnaugh map:
+ *
+ * | Raw | ECC-based |
+ * -------------+-------------------------+-------------------------+
+ * | Read the conventional | |
+ * | OOB at the end of the | |
+ * Swapping | page and return it. It | |
+ * | contains exactly what | |
+ * | we want. | Read the block mark and |
+ * -------------+-------------------------+ return it in a buffer |
+ * | Read the conventional | full of set bits. |
+ * | OOB at the end of the | |
+ * | page and also the block | |
+ * Transcribing | mark in the metadata. | |
+ * | Copy the block mark | |
+ * | into the first byte of | |
+ * | the OOB. | |
+ * -------------+-------------------------+-------------------------+
+ *
+ * Note that we break rule #4 in the Transcribing/Raw case because we're not
+ * giving an accurate view of the actual, physical bytes in the page (we're
+ * overwriting the block mark). That's OK because it's more important to follow
+ * rule #2.
+ *
+ * It turns out that knowing whether we want an "ECC-based" or "raw" read is not
+ * easy. When reading a page, for example, the NAND Flash MTD code calls our
+ * ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an
+ * ECC-based or raw view of the page is implicit in which function it calls
+ * (there is a similar pair of ECC-based/raw functions for writing).
+ *
+ * Since MTD assumes the OOB is not covered by ECC, there is no pair of
+ * ECC-based/raw functions for reading or or writing the OOB. The fact that the
+ * caller wants an ECC-based or raw view of the page is not propagated down to
+ * this driver.
+ *
+ * Since our OOB *is* covered by ECC, we need this information. So, we hook the
+ * ecc.read_oob and ecc.write_oob function pointers in the owning
+ * struct mtd_info with our own functions. These hook functions set the
+ * raw_oob_mode field so that, when control finally arrives here, we'll know
+ * what to do.
+ */
+static int mxs_nand_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *nand,
+ int page, int cmd)
+{
+ struct mxs_nand_info *nand_info = nand->priv;
+
+ /*
+ * First, fill in the OOB buffer. If we're doing a raw read, we need to
+ * get the bytes from the physical page. If we're not doing a raw read,
+ * we need to fill the buffer with set bits.
+ */
+ if (nand_info->raw_oob_mode) {
+ /*
+ * If control arrives here, we're doing a "raw" read. Send the
+ * command to read the conventional OOB and read it.
+ */
+ nand->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+ nand->read_buf(mtd, nand->oob_poi, mtd->oobsize);
+ } else {
+ /*
+ * If control arrives here, we're not doing a "raw" read. Fill
+ * the OOB buffer with set bits and correct the block mark.
+ */
+ memset(nand->oob_poi, 0xff, mtd->oobsize);
+
+ nand->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+ mxs_nand_read_buf(mtd, nand->oob_poi, 1);
+ }
+
+ return 0;
+
+}
+
+/*
+ * Write OOB data to NAND.
+ */
+static int mxs_nand_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *nand,
+ int page)
+{
+ struct mxs_nand_info *nand_info = nand->priv;
+ uint8_t block_mark = 0;
+
+ /*
+ * There are fundamental incompatibilities between the i.MX GPMI NFC and
+ * the NAND Flash MTD model that make it essentially impossible to write
+ * the out-of-band bytes.
+ *
+ * We permit *ONE* exception. If the *intent* of writing the OOB is to
+ * mark a block bad, we can do that.
+ */
+
+ if (nand_info->marking_block_bad) {
+ printf("NXS NAND: Writing OOB isn't supported\n");
+ return -EIO;
+ }
+
+ /* Write the block mark. */
+ nand->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+ nand->write_buf(mtd, &block_mark, 1);
+ nand->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ /* Check if it worked. */
+ if (nand->waitfunc(mtd, nand) & NAND_STATUS_FAIL)
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * Claims all blocks are good.
+ *
+ * In principle, this function is *only* called when the NAND Flash MTD system
+ * isn't allowed to keep an in-memory bad block table, so it is forced to ask
+ * the driver for bad block information.
+ *
+ * In fact, we permit the NAND Flash MTD system to have an in-memory BBT, so
+ * this function is *only* called when we take it away.
+ *
+ * We take away the in-memory BBT when the user sets the "ignorebad" parameter,
+ * which indicates that all blocks should be reported good.
+ *
+ * Thus, this function is only called when we want *all* blocks to look good,
+ * so it *always* return success.
+ */
+static int mxs_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+ return 0;
+}
+
+/*
+ * Nominally, the purpose of this function is to look for or create the bad
+ * block table. In fact, since the HIL calls this function at the very end of
+ * the initialization process started by nand_scan(), and the HIL doesn't have a
+ * more formal mechanism, everyone "hooks" this function to continue the
+ * initialization process.
+ *
+ * At this point, the physical NAND Flash chips have been identified and
+ * counted, so we know the physical geometry. This enables us to make some
+ * important configuration decisions.
+ *
+ * The return value of this function propogates directly back to this driver's
+ * call to nand_scan(). Anything other than zero will cause this driver to
+ * tear everything down and declare failure.
+ */
+static int mxs_nand_scan_bbt(struct mtd_info *mtd)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mxs_nand_info *nand_info = nand->priv;
+ struct mx28_bch_regs *bch_regs = (struct mx28_bch_regs *)MXS_BCH_BASE;
+ uint32_t tmp;
+
+ /* Configure BCH and set NFC geometry */
+ mx28_reset_block(&bch_regs->hw_bch_ctrl_reg);
+
+ /* Configure layout 0 */
+ tmp = (mxs_nand_ecc_chunk_cnt(mtd->writesize) - 1)
+ << BCH_FLASHLAYOUT0_NBLOCKS_OFFSET;
+ tmp |= MXS_NAND_METADATA_SIZE << BCH_FLASHLAYOUT0_META_SIZE_OFFSET;
+ tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
+ << BCH_FLASHLAYOUT0_ECC0_OFFSET;
+ tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+ writel(tmp, &bch_regs->hw_bch_flash0layout0);
+
+ tmp = (mtd->writesize + mtd->oobsize)
+ << BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET;
+ tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
+ << BCH_FLASHLAYOUT1_ECCN_OFFSET;
+ tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+ writel(tmp, &bch_regs->hw_bch_flash0layout1);
+
+ /* Set *all* chip selects to use layout 0 */
+ writel(0, &bch_regs->hw_bch_layoutselect);
+
+ /* Enable BCH complete interrupt */
+ writel(BCH_CTRL_COMPLETE_IRQ_EN, &bch_regs->hw_bch_ctrl_set);
+
+ /* Hook some operations at the MTD level. */
+ if (mtd->read_oob != mxs_nand_hook_read_oob) {
+ nand_info->hooked_read_oob = mtd->read_oob;
+ mtd->read_oob = mxs_nand_hook_read_oob;
+ }
+
+ if (mtd->write_oob != mxs_nand_hook_write_oob) {
+ nand_info->hooked_write_oob = mtd->write_oob;
+ mtd->write_oob = mxs_nand_hook_write_oob;
+ }
+
+ if (mtd->block_markbad != mxs_nand_hook_block_markbad) {
+ nand_info->hooked_block_markbad = mtd->block_markbad;
+ mtd->block_markbad = mxs_nand_hook_block_markbad;
+ }
+
+ /* We use the reference implementation for bad block management. */
+ return nand_default_bbt(mtd);
+}
+
+/*
+ * Allocate DMA buffers
+ */
+int mxs_nand_alloc_buffers(struct mxs_nand_info *nand_info)
+{
+ uint8_t *buf;
+ const int size = NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE;
+
+ /* DMA buffers */
+ buf = memalign(MXS_DMA_ALIGNMENT, size);
+ if (!buf) {
+ printf("MXS NAND: Error allocating DMA buffers\n");
+ return -ENOMEM;
+ }
+
+ memset(buf, 0, size);
+
+ nand_info->data_buf = buf;
+ nand_info->oob_buf = buf + NAND_MAX_PAGESIZE;
+
+ /* Command buffers */
+ nand_info->cmd_buf = memalign(MXS_DMA_ALIGNMENT,
+ MXS_NAND_COMMAND_BUFFER_SIZE);
+ if (!nand_info->cmd_buf) {
+ free(buf);
+ printf("MXS NAND: Error allocating command buffers\n");
+ return -ENOMEM;
+ }
+ memset(nand_info->cmd_buf, 0, MXS_NAND_COMMAND_BUFFER_SIZE);
+ nand_info->cmd_queue_len = 0;
+
+ return 0;
+}
+
+/*
+ * Initializes the NFC hardware.
+ */
+int mxs_nand_init(struct mxs_nand_info *info)
+{
+ struct mx28_gpmi_regs *gpmi_regs =
+ (struct mx28_gpmi_regs *)MXS_GPMI_BASE;
+ int i = 0;
+
+ info->desc = malloc(sizeof(struct mxs_dma_desc *) *
+ MXS_NAND_DMA_DESCRIPTOR_COUNT);
+ if (!info->desc)
+ goto err1;
+
+ /* Allocate the DMA descriptors. */
+ for (i = 0; i < MXS_NAND_DMA_DESCRIPTOR_COUNT; i++) {
+ info->desc[i] = mxs_dma_desc_alloc();
+ if (!info->desc[i])
+ goto err2;
+ }
+
+ /* Init the DMA controller. */
+ mxs_dma_init();
+
+ /* Reset the GPMI block. */
+ mx28_reset_block(&gpmi_regs->hw_gpmi_ctrl0_reg);
+
+ /*
+ * Choose NAND mode, set IRQ polarity, disable write protection and
+ * select BCH ECC.
+ */
+ clrsetbits_le32(&gpmi_regs->hw_gpmi_ctrl1,
+ GPMI_CTRL1_GPMI_MODE,
+ GPMI_CTRL1_ATA_IRQRDY_POLARITY | GPMI_CTRL1_DEV_RESET |
+ GPMI_CTRL1_BCH_MODE);
+
+ return 0;
+
+err2:
+ free(info->desc);
+err1:
+ for (--i; i >= 0; i--)
+ mxs_dma_desc_free(info->desc[i]);
+ printf("MXS NAND: Unable to allocate DMA descriptors\n");
+ return -ENOMEM;
+}
+
+/*!
+ * This function is called during the driver binding process.
+ *
+ * @param pdev the device structure used to store device specific
+ * information that is used by the suspend, resume and
+ * remove functions
+ *
+ * @return The function always returns 0.
+ */
+int board_nand_init(struct nand_chip *nand)
+{
+ struct mxs_nand_info *nand_info;
+ int err;
+
+ nand_info = malloc(sizeof(struct mxs_nand_info));
+ if (!nand_info) {
+ printf("MXS NAND: Failed to allocate private data\n");
+ return -ENOMEM;
+ }
+ memset(nand_info, 0, sizeof(struct mxs_nand_info));
+
+ err = mxs_nand_alloc_buffers(nand_info);
+ if (err)
+ goto err1;
+
+ err = mxs_nand_init(nand_info);
+ if (err)
+ goto err2;
+
+ memset(&fake_ecc_layout, 0, sizeof(fake_ecc_layout));
+
+ nand->priv = nand_info;
+ nand->options |= NAND_NO_SUBPAGE_WRITE;
+
+ nand->cmd_ctrl = mxs_nand_cmd_ctrl;
+
+ nand->dev_ready = mxs_nand_device_ready;
+ nand->select_chip = mxs_nand_select_chip;
+ nand->block_bad = mxs_nand_block_bad;
+ nand->scan_bbt = mxs_nand_scan_bbt;
+
+ nand->read_byte = mxs_nand_read_byte;
+
+ nand->read_buf = mxs_nand_read_buf;
+ nand->write_buf = mxs_nand_write_buf;
+
+ nand->ecc.read_page = mxs_nand_ecc_read_page;
+ nand->ecc.write_page = mxs_nand_ecc_write_page;
+ nand->ecc.read_oob = mxs_nand_ecc_read_oob;
+ nand->ecc.write_oob = mxs_nand_ecc_write_oob;
+
+ nand->ecc.layout = &fake_ecc_layout;
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.bytes = 9;
+ nand->ecc.size = 512;
+
+ return 0;
+
+err2:
+ free(nand_info->data_buf);
+ free(nand_info->cmd_buf);
+err1:
+ free(nand_info);
+ return err;
+}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 23/31] M28: Enable NAND
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (21 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 22/31] iMX28: Add GPMI NAND driver Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 24/31] iMX28: Add driver for internal RTC Marek Vasut
` (7 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
include/configs/m28evk.h | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index dee276c..5cf62a2 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -53,6 +53,7 @@
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
@@ -120,6 +121,18 @@
#endif
/*
+ * NAND
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_MXS
+#define CONFIG_APBH_DMA
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x60000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define NAND_MAX_CHIPS 8
+#endif
+
+/*
* Ethernet on SOC (FEC)
*/
#ifdef CONFIG_CMD_NET
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 24/31] iMX28: Add driver for internal RTC
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (22 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 23/31] M28: Enable NAND Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 25/31] M28: Enable the internal RTC instead of the M41T62 Marek Vasut
` (6 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
drivers/rtc/Makefile | 1 +
drivers/rtc/mxsrtc.c | 88 ++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 89 insertions(+), 0 deletions(-)
create mode 100644 drivers/rtc/mxsrtc.c
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index ca27745..5d7da6a 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -56,6 +56,7 @@ COBJS-$(CONFIG_RTC_MK48T59) += mk48t59.o
COBJS-$(CONFIG_RTC_MPC5200) += mpc5xxx.o
COBJS-$(CONFIG_RTC_MPC8xx) += mpc8xx.o
COBJS-$(CONFIG_RTC_MV) += mvrtc.o
+COBJS-$(CONFIG_RTC_MXS) += mxsrtc.o
COBJS-$(CONFIG_RTC_PCF8563) += pcf8563.o
COBJS-$(CONFIG_RTC_PL031) += pl031.o
COBJS-$(CONFIG_RTC_PT7C4338) += pt7c4338.o
diff --git a/drivers/rtc/mxsrtc.c b/drivers/rtc/mxsrtc.c
new file mode 100644
index 0000000..648653d
--- /dev/null
+++ b/drivers/rtc/mxsrtc.c
@@ -0,0 +1,88 @@
+/*
+ * Freescale i.MX28 RTC Driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <rtc.h>
+#include <asm/io.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-rtc.h>
+#include <asm/arch/mx28.h>
+
+#define MXS_RTC_MAX_TIMEOUT 1000000
+
+/* Set time in seconds since 1970-01-01 */
+int mxs_rtc_set_time(uint32_t secs)
+{
+ struct mx28_rtc_regs *rtc_regs = (struct mx28_rtc_regs *)MXS_RTC_BASE;
+ int ret;
+
+ writel(secs, &rtc_regs->hw_rtc_seconds);
+
+ /*
+ * The 0x80 here means seconds were copied to analog. This information
+ * is taken from the linux kernel driver for the STMP37xx RTC since
+ * documentation doesn't mention it.
+ */
+ ret = mx28_wait_mask_clr(&rtc_regs->hw_rtc_stat_reg,
+ 0x80 << RTC_STAT_STALE_REGS_OFFSET, MXS_RTC_MAX_TIMEOUT);
+
+ if (ret)
+ printf("MXS RTC: Timeout waiting for update\n");
+
+ return ret;
+}
+
+int rtc_get(struct rtc_time *time)
+{
+ struct mx28_rtc_regs *rtc_regs = (struct mx28_rtc_regs *)MXS_RTC_BASE;
+ uint32_t secs;
+
+ secs = readl(&rtc_regs->hw_rtc_seconds);
+ to_tm(secs, time);
+
+ return 0;
+}
+
+int rtc_set(struct rtc_time *time)
+{
+ uint32_t secs;
+
+ secs = mktime(time->tm_year, time->tm_mon, time->tm_mday,
+ time->tm_hour, time->tm_min, time->tm_sec);
+
+ return mxs_rtc_set_time(secs);
+}
+
+void rtc_reset(void)
+{
+ struct mx28_rtc_regs *rtc_regs = (struct mx28_rtc_regs *)MXS_RTC_BASE;
+ int ret;
+
+ /* Set time to 1970-01-01 */
+ mxs_rtc_set_time(0);
+
+ /* Reset the RTC block */
+ ret = mx28_reset_block(&rtc_regs->hw_rtc_ctrl_reg);
+ if (ret)
+ printf("MXS RTC: Block reset timeout\n");
+}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 25/31] M28: Enable the internal RTC instead of the M41T62
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (23 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 24/31] iMX28: Add driver for internal RTC Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-09 12:45 ` Stefano Babic
2011-09-08 20:42 ` [U-Boot] [PATCH 26/31] M28: Enable UBI and UBIFS Marek Vasut
` (5 subsequent siblings)
30 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
include/configs/m28evk.h | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 5cf62a2..dbeb37e 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -166,10 +166,16 @@
* RTC
*/
#ifdef CONFIG_CMD_DATE
+/* Use the internal RTC in the MXS chip */
+#define CONFIG_RTC_INTERNAL
+#ifdef CONFIG_RTC_INTERNAL
+#define CONFIG_RTC_MXS
+#else
#define CONFIG_RTC_M41T62
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
#define CONFIG_SYS_M41T11_BASE_YEAR 2000
#endif
+#endif
/*
* SPI
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 25/31] M28: Enable the internal RTC instead of the M41T62
2011-09-08 20:42 ` [U-Boot] [PATCH 25/31] M28: Enable the internal RTC instead of the M41T62 Marek Vasut
@ 2011-09-09 12:45 ` Stefano Babic
2011-09-09 12:51 ` Marek Vasut
0 siblings, 1 reply; 68+ messages in thread
From: Stefano Babic @ 2011-09-09 12:45 UTC (permalink / raw)
To: u-boot
On 09/08/2011 10:42 PM, Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>
> ---
Only to remember: we have already agree you will squash your patches
together regarding m28evk. I will only set this patch (and the other
similar patches) in state "Change requested" on patchwork.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 25/31] M28: Enable the internal RTC instead of the M41T62
2011-09-09 12:45 ` Stefano Babic
@ 2011-09-09 12:51 ` Marek Vasut
2011-09-09 12:55 ` Stefano Babic
0 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-09 12:51 UTC (permalink / raw)
To: u-boot
On Friday, September 09, 2011 02:45:16 PM Stefano Babic wrote:
> On 09/08/2011 10:42 PM, Marek Vasut wrote:
> > Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> > Cc: Stefano Babic <sbabic@denx.de>
> > Cc: Wolfgang Denk <wd@denx.de>
> > Cc: Detlev Zundel <dzu@denx.de>
> > ---
>
> Only to remember: we have already agree you will squash your patches
> together regarding m28evk. I will only set this patch (and the other
> similar patches) in state "Change requested" on patchwork.
Yea sure, I'll squash them ... have it like:
* Add CPU support
* ... drivers ...
* M28EVK
* README.m28
>
> Best regards,
> Stefano Babic
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 25/31] M28: Enable the internal RTC instead of the M41T62
2011-09-09 12:51 ` Marek Vasut
@ 2011-09-09 12:55 ` Stefano Babic
0 siblings, 0 replies; 68+ messages in thread
From: Stefano Babic @ 2011-09-09 12:55 UTC (permalink / raw)
To: u-boot
On 09/09/2011 02:51 PM, Marek Vasut wrote:
> On Friday, September 09, 2011 02:45:16 PM Stefano Babic wrote:
>> On 09/08/2011 10:42 PM, Marek Vasut wrote:
>>> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
>>> Cc: Stefano Babic <sbabic@denx.de>
>>> Cc: Wolfgang Denk <wd@denx.de>
>>> Cc: Detlev Zundel <dzu@denx.de>
>>> ---
>>
>> Only to remember: we have already agree you will squash your patches
>> together regarding m28evk. I will only set this patch (and the other
>> similar patches) in state "Change requested" on patchwork.
>
> Yea sure, I'll squash them ... have it like:
> * Add CPU support
> * ... drivers ...
> * M28EVK
> * README.m28
That's fine with me.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 26/31] M28: Enable UBI and UBIFS
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (24 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 25/31] M28: Enable the internal RTC instead of the M41T62 Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 27/31] M28: Save environment in NAND Marek Vasut
` (4 subsequent siblings)
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
include/configs/m28evk.h | 16 ++++++++++++++++
1 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index dbeb37e..0d4a0a3 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -130,6 +130,22 @@
#define CONFIG_SYS_NAND_BASE 0x60000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define NAND_MAX_CHIPS 8
+
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT "nand0=gpmi-nand.0"
+#define MTDPARTS_DEFAULT \
+ "mtdparts=gpmi-nand.0:" \
+ "3m(bootloader)ro," \
+ "128k(environment)," \
+ "128k(redundant-environment)," \
+ "4m(kernel)," \
+ "-(filesystem)"
#endif
/*
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 27/31] M28: Save environment in NAND
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (25 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 26/31] M28: Enable UBI and UBIFS Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-16 19:15 ` Scott Wood
2011-09-17 7:10 ` Fabio Estevam
2011-09-08 20:42 ` [U-Boot] [PATCH 28/31] iMX28: Add image header generator tool Marek Vasut
` (3 subsequent siblings)
30 siblings, 2 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
include/configs/m28evk.h | 11 +++++++++--
1 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 0d4a0a3..c120c63 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -131,6 +131,15 @@
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define NAND_MAX_CHIPS 8
+/* Environment is in NAND */
+#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_SIZE (16 * 1024)
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+#define CONFIG_ENV_OFFSET 0x300000
+#define CONFIG_ENV_OFFSET_REDUND \
+ (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
+
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_CMD_MTDPARTS
@@ -230,6 +239,4 @@
#define CONFIG_LOADADDR 0x42000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_ENV_IS_NOWHERE 1
-
#endif /* __M28_H__ */
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 27/31] M28: Save environment in NAND
2011-09-08 20:42 ` [U-Boot] [PATCH 27/31] M28: Save environment in NAND Marek Vasut
@ 2011-09-16 19:15 ` Scott Wood
2011-09-17 8:20 ` Marek Vasut
2011-09-17 7:10 ` Fabio Estevam
1 sibling, 1 reply; 68+ messages in thread
From: Scott Wood @ 2011-09-16 19:15 UTC (permalink / raw)
To: u-boot
On 09/08/2011 03:42 PM, Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>
> ---
> include/configs/m28evk.h | 11 +++++++++--
> 1 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
> index 0d4a0a3..c120c63 100644
> --- a/include/configs/m28evk.h
> +++ b/include/configs/m28evk.h
> @@ -131,6 +131,15 @@
> #define CONFIG_SYS_NAND_5_ADDR_CYCLE
> #define NAND_MAX_CHIPS 8
>
> +/* Environment is in NAND */
> +#define CONFIG_ENV_IS_IN_NAND 1
> +#define CONFIG_ENV_SECT_SIZE (128 * 1024)
> +#define CONFIG_ENV_SIZE (16 * 1024)
> +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
> +#define CONFIG_ENV_OFFSET 0x300000
> +#define CONFIG_ENV_OFFSET_REDUND \
> + (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
> +
> #define CONFIG_CMD_UBI
> #define CONFIG_CMD_UBIFS
> #define CONFIG_CMD_MTDPARTS
> @@ -230,6 +239,4 @@
> #define CONFIG_LOADADDR 0x42000000
> #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
>
> -#define CONFIG_ENV_IS_NOWHERE 1
> -
> #endif /* __M28_H__ */
Consider using CONFIG_ENV_RANGE to allow for bad blocks.
-Scott
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 27/31] M28: Save environment in NAND
2011-09-16 19:15 ` Scott Wood
@ 2011-09-17 8:20 ` Marek Vasut
2011-09-19 17:54 ` Scott Wood
0 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-17 8:20 UTC (permalink / raw)
To: u-boot
On Friday, September 16, 2011 09:15:12 PM Scott Wood wrote:
> On 09/08/2011 03:42 PM, Marek Vasut wrote:
> > Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> > Cc: Stefano Babic <sbabic@denx.de>
> > Cc: Wolfgang Denk <wd@denx.de>
> > Cc: Detlev Zundel <dzu@denx.de>
> > ---
> >
> > include/configs/m28evk.h | 11 +++++++++--
> > 1 files changed, 9 insertions(+), 2 deletions(-)
> >
> > diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
> > index 0d4a0a3..c120c63 100644
> > --- a/include/configs/m28evk.h
> > +++ b/include/configs/m28evk.h
> > @@ -131,6 +131,15 @@
> >
> > #define CONFIG_SYS_NAND_5_ADDR_CYCLE
> > #define NAND_MAX_CHIPS 8
> >
> > +/* Environment is in NAND */
> > +#define CONFIG_ENV_IS_IN_NAND 1
> > +#define CONFIG_ENV_SECT_SIZE (128 * 1024)
> > +#define CONFIG_ENV_SIZE (16 * 1024)
> > +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
> > +#define CONFIG_ENV_OFFSET 0x300000
> > +#define CONFIG_ENV_OFFSET_REDUND \
> > + (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
> > +
> >
> > #define CONFIG_CMD_UBI
> > #define CONFIG_CMD_UBIFS
> > #define CONFIG_CMD_MTDPARTS
> >
> > @@ -230,6 +239,4 @@
> >
> > #define CONFIG_LOADADDR 0x42000000
> > #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> >
> > -#define CONFIG_ENV_IS_NOWHERE 1
> > -
> >
> > #endif /* __M28_H__ */
>
> Consider using CONFIG_ENV_RANGE to allow for bad blocks.
How does this actually play with CONFIG_MTDPARTS ?
For you see -- I now have
CONFIG_MTDPARTS "...128k(environment), 128k(redundant-environment)..."
and CONFIG_ENV_SECT_SIZE (128 * 1024).
So what exactly am I supposed to set into CONFIG_ENV_RANGE and do I have to
modify the CONFIG_MTDPARTS?
Thanks, cheers!
>
> -Scott
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 27/31] M28: Save environment in NAND
2011-09-17 8:20 ` Marek Vasut
@ 2011-09-19 17:54 ` Scott Wood
0 siblings, 0 replies; 68+ messages in thread
From: Scott Wood @ 2011-09-19 17:54 UTC (permalink / raw)
To: u-boot
On 09/17/2011 03:20 AM, Marek Vasut wrote:
> On Friday, September 16, 2011 09:15:12 PM Scott Wood wrote:
>> Consider using CONFIG_ENV_RANGE to allow for bad blocks.
>
> How does this actually play with CONFIG_MTDPARTS ?
I don't think there's any direct interaction between the environment
code and mtdparts.
> For you see -- I now have
> CONFIG_MTDPARTS "...128k(environment), 128k(redundant-environment)..."
> and CONFIG_ENV_SECT_SIZE (128 * 1024).
>
> So what exactly am I supposed to set into CONFIG_ENV_RANGE and do I have to
> modify the CONFIG_MTDPARTS?
You'd have to make the environment partitions larger -- the idea is to
provide an extra block or two in case of bad blocks. CONFIG_ENV_RANGE
would be set to the partition size.
-Scott
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 27/31] M28: Save environment in NAND
2011-09-08 20:42 ` [U-Boot] [PATCH 27/31] M28: Save environment in NAND Marek Vasut
2011-09-16 19:15 ` Scott Wood
@ 2011-09-17 7:10 ` Fabio Estevam
1 sibling, 0 replies; 68+ messages in thread
From: Fabio Estevam @ 2011-09-17 7:10 UTC (permalink / raw)
To: u-boot
On Thu, Sep 8, 2011 at 5:42 PM, Marek Vasut <marek.vasut@gmail.com> wrote:
...
> +/* Environment is in NAND */
> +#define ? ? ? ?CONFIG_ENV_IS_IN_NAND ? ? ? ? ? 1
You should remove the "1".
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 28/31] iMX28: Add image header generator tool
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (26 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 27/31] M28: Save environment in NAND Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-09 8:58 ` Stefano Babic
2011-09-08 20:42 ` [U-Boot] [PATCH 29/31] M28: Add NAND update scripts Marek Vasut
` (2 subsequent siblings)
30 siblings, 1 reply; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
This tool can now generate proper image for "BootStream" files.
NOTE: This tool now works only for NAND.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
tools/Makefile | 6 +
tools/mxsboot.c | 687 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 693 insertions(+), 0 deletions(-)
create mode 100644 tools/mxsboot.c
diff --git a/tools/Makefile b/tools/Makefile
index fc741d3..2caac78 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -67,6 +67,7 @@ BIN_FILES-$(CONFIG_CMD_NET) += gen_eth_addr$(SFX)
BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX)
BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX)
BIN_FILES-y += mkimage$(SFX)
+BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX)
BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX)
BIN_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX)
@@ -90,6 +91,7 @@ NOPED_OBJ_FILES-y += kwbimage.o
NOPED_OBJ_FILES-y += imximage.o
NOPED_OBJ_FILES-y += omapimage.o
NOPED_OBJ_FILES-y += mkimage.o
+OBJ_FILES-$(CONFIG_MX28) += mxsboot.o
OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o
NOPED_OBJ_FILES-y += os_support.o
OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o
@@ -204,6 +206,10 @@ $(obj)mpc86x_clk$(SFX): $(obj)mpc86x_clk.o
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
$(HOSTSTRIP) $@
+$(obj)mxsboot$(SFX): $(obj)mxsboot.o
+ $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
+ $(HOSTSTRIP) $@
+
$(obj)ncb$(SFX): $(obj)ncb.o
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
$(HOSTSTRIP) $@
diff --git a/tools/mxsboot.c b/tools/mxsboot.c
new file mode 100644
index 0000000..2feda19
--- /dev/null
+++ b/tools/mxsboot.c
@@ -0,0 +1,687 @@
+/*
+ * Freescale i.MX28 image generator
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <fcntl.h>
+#include <malloc.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+/*
+ * Default BCB layout.
+ *
+ * TWEAK this if you have blown any OCOTP fuses.
+ */
+#define STRIDE_PAGES 64
+#define STRIDE_COUNT 4
+
+/*
+ * Layout for 256Mb big NAND with 2048b page size, 64b OOB size and
+ * 128kb erase size.
+ *
+ * TWEAK this if you have different kind of NAND chip.
+ */
+uint32_t nand_writesize = 2048;
+uint32_t nand_oobsize = 64;
+uint32_t nand_erasesize = 128 * 1024;
+
+/*
+ * Sector on which the SigmaTel boot partition (0x53) starts.
+ */
+uint32_t sd_sector = 2048;
+
+/*
+ * Each of the U-Boot bootstreams is at maximum 1MB big.
+ *
+ * TWEAK this if, for some wild reason, you need to boot bigger image.
+ */
+#define MAX_BOOTSTREAM_SIZE (1 * 1024 * 1024)
+
+/* i.MX28 NAND controller-specific constants. DO NOT TWEAK! */
+#define MXS_NAND_DMA_DESCRIPTOR_COUNT 4
+#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE 512
+#define MXS_NAND_METADATA_SIZE 10
+#define MXS_NAND_COMMAND_BUFFER_SIZE 32
+
+struct mx28_nand_fcb {
+ uint32_t checksum;
+ uint32_t fingerprint;
+ uint32_t version;
+ struct {
+ uint8_t data_setup;
+ uint8_t data_hold;
+ uint8_t address_setup;
+ uint8_t dsample_time;
+ uint8_t nand_timing_state;
+ uint8_t rea;
+ uint8_t rloh;
+ uint8_t rhoh;
+ } timing;
+ uint32_t page_data_size;
+ uint32_t total_page_size;
+ uint32_t sectors_per_block;
+ uint32_t number_of_nands; /* Ignored */
+ uint32_t total_internal_die; /* Ignored */
+ uint32_t cell_type; /* Ignored */
+ uint32_t ecc_block_n_ecc_type;
+ uint32_t ecc_block_0_size;
+ uint32_t ecc_block_n_size;
+ uint32_t ecc_block_0_ecc_type;
+ uint32_t metadata_bytes;
+ uint32_t num_ecc_blocks_per_page;
+ uint32_t ecc_block_n_ecc_level_sdk; /* Ignored */
+ uint32_t ecc_block_0_size_sdk; /* Ignored */
+ uint32_t ecc_block_n_size_sdk; /* Ignored */
+ uint32_t ecc_block_0_ecc_level_sdk; /* Ignored */
+ uint32_t num_ecc_blocks_per_page_sdk; /* Ignored */
+ uint32_t metadata_bytes_sdk; /* Ignored */
+ uint32_t erase_threshold;
+ uint32_t boot_patch;
+ uint32_t patch_sectors;
+ uint32_t firmware1_starting_sector;
+ uint32_t firmware2_starting_sector;
+ uint32_t sectors_in_firmware1;
+ uint32_t sectors_in_firmware2;
+ uint32_t dbbt_search_area_start_address;
+ uint32_t badblock_marker_byte;
+ uint32_t badblock_marker_start_bit;
+ uint32_t bb_marker_physical_offset;
+};
+
+struct mx28_nand_dbbt {
+ uint32_t checksum;
+ uint32_t fingerprint;
+ uint32_t version;
+ uint32_t number_bb;
+ uint32_t number_2k_pages_bb;
+};
+
+struct mx28_nand_bbt {
+ uint32_t nand;
+ uint32_t number_bb;
+ uint32_t badblock[510];
+};
+
+struct mx28_sd_drive_info {
+ uint32_t chip_num;
+ uint32_t drive_type;
+ uint32_t tag;
+ uint32_t first_sector_number;
+ uint32_t sector_count;
+};
+
+struct mx28_sd_config_block {
+ uint32_t signature;
+ uint32_t primary_boot_tag;
+ uint32_t secondary_boot_tag;
+ uint32_t num_copies;
+ struct mx28_sd_drive_info drv_info[1];
+};
+
+static inline uint32_t mx28_nand_ecc_size_in_bits(uint32_t ecc_strength)
+{
+ return ecc_strength * 13;
+}
+
+static inline uint32_t mx28_nand_get_ecc_strength(uint32_t page_data_size,
+ uint32_t page_oob_size)
+{
+ if (page_data_size == 2048)
+ return 8;
+
+ if (page_data_size == 4096) {
+ if (page_oob_size == 128)
+ return 8;
+
+ if (page_oob_size == 218)
+ return 16;
+ }
+
+ return 0;
+}
+
+static inline uint32_t mx28_nand_get_mark_offset(uint32_t page_data_size,
+ uint32_t ecc_strength)
+{
+ uint32_t chunk_data_size_in_bits;
+ uint32_t chunk_ecc_size_in_bits;
+ uint32_t chunk_total_size_in_bits;
+ uint32_t block_mark_chunk_number;
+ uint32_t block_mark_chunk_bit_offset;
+ uint32_t block_mark_bit_offset;
+
+ chunk_data_size_in_bits = MXS_NAND_CHUNK_DATA_CHUNK_SIZE * 8;
+ chunk_ecc_size_in_bits = mx28_nand_ecc_size_in_bits(ecc_strength);
+
+ chunk_total_size_in_bits =
+ chunk_data_size_in_bits + chunk_ecc_size_in_bits;
+
+ /* Compute the bit offset of the block mark within the physical page. */
+ block_mark_bit_offset = page_data_size * 8;
+
+ /* Subtract the metadata bits. */
+ block_mark_bit_offset -= MXS_NAND_METADATA_SIZE * 8;
+
+ /*
+ * Compute the chunk number (starting at zero) in which the block mark
+ * appears.
+ */
+ block_mark_chunk_number =
+ block_mark_bit_offset / chunk_total_size_in_bits;
+
+ /*
+ * Compute the bit offset of the block mark within its chunk, and
+ * validate it.
+ */
+ block_mark_chunk_bit_offset = block_mark_bit_offset -
+ (block_mark_chunk_number * chunk_total_size_in_bits);
+
+ if (block_mark_chunk_bit_offset > chunk_data_size_in_bits)
+ return 1;
+
+ /*
+ * Now that we know the chunk number in which the block mark appears,
+ * we can subtract all the ECC bits that appear before it.
+ */
+ block_mark_bit_offset -=
+ block_mark_chunk_number * chunk_ecc_size_in_bits;
+
+ return block_mark_bit_offset;
+}
+
+static inline uint32_t mx28_nand_mark_byte_offset(void)
+{
+ uint32_t ecc_strength;
+ ecc_strength = mx28_nand_get_ecc_strength(nand_writesize, nand_oobsize);
+ return mx28_nand_get_mark_offset(nand_writesize, ecc_strength) >> 3;
+}
+
+static inline uint32_t mx28_nand_mark_bit_offset(void)
+{
+ uint32_t ecc_strength;
+ ecc_strength = mx28_nand_get_ecc_strength(nand_writesize, nand_oobsize);
+ return mx28_nand_get_mark_offset(nand_writesize, ecc_strength) & 0x7;
+}
+
+static uint32_t mx28_nand_block_csum(uint8_t *block, uint32_t size)
+{
+ uint32_t csum = 0;
+ int i;
+
+ for (i = 0; i < size; i++)
+ csum += block[i];
+
+ return csum ^ 0xffffffff;
+}
+
+static struct mx28_nand_fcb *mx28_nand_get_fcb(uint32_t size)
+{
+ struct mx28_nand_fcb *fcb;
+ uint32_t bcb_size_bytes;
+ uint32_t stride_size_bytes;
+ uint32_t bootstream_size_pages;
+ uint32_t fw1_start_page;
+ uint32_t fw2_start_page;
+
+ fcb = malloc(nand_writesize);
+ if (!fcb) {
+ printf("MX28 NAND: Unable to allocate FCB\n");
+ return NULL;
+ }
+
+ memset(fcb, 0, nand_writesize);
+
+ fcb->fingerprint = 0x20424346;
+ fcb->version = 0x01000000;
+
+ /*
+ * FIXME: These here are default values as found in kobs-ng. We should
+ * probably retrieve the data from NAND or something.
+ */
+ fcb->timing.data_setup = 80;
+ fcb->timing.data_hold = 60;
+ fcb->timing.address_setup = 25;
+ fcb->timing.dsample_time = 6;
+
+ fcb->page_data_size = nand_writesize;
+ fcb->total_page_size = nand_writesize + nand_oobsize;
+ fcb->sectors_per_block = nand_erasesize / nand_writesize;
+
+ fcb->num_ecc_blocks_per_page = (nand_writesize / 512) - 1;
+ fcb->ecc_block_0_size = 512;
+ fcb->ecc_block_n_size = 512;
+ fcb->metadata_bytes = 10;
+
+ if (nand_writesize == 2048) {
+ fcb->ecc_block_n_ecc_type = 4;
+ fcb->ecc_block_0_ecc_type = 4;
+ } else if (nand_writesize == 4096) {
+ if (nand_oobsize == 128) {
+ fcb->ecc_block_n_ecc_type = 4;
+ fcb->ecc_block_0_ecc_type = 4;
+ } else if (nand_oobsize == 218) {
+ fcb->ecc_block_n_ecc_type = 8;
+ fcb->ecc_block_0_ecc_type = 8;
+ }
+ }
+
+ if (fcb->ecc_block_n_ecc_type == 0) {
+ printf("MX28 NAND: Unsupported NAND geometry\n");
+ goto err;
+ }
+
+ fcb->boot_patch = 0;
+ fcb->patch_sectors = 0;
+
+ fcb->badblock_marker_byte = mx28_nand_mark_byte_offset();
+ fcb->badblock_marker_start_bit = mx28_nand_mark_bit_offset();
+ fcb->bb_marker_physical_offset = nand_writesize;
+
+ stride_size_bytes = STRIDE_PAGES * nand_writesize;
+ bcb_size_bytes = stride_size_bytes * STRIDE_COUNT;
+
+ bootstream_size_pages = (size + (nand_writesize - 1)) /
+ nand_writesize;
+
+ fw1_start_page = 2 * bcb_size_bytes / nand_writesize;
+ fw2_start_page = (2 * bcb_size_bytes + MAX_BOOTSTREAM_SIZE) /
+ nand_writesize;
+
+ fcb->firmware1_starting_sector = fw1_start_page;
+ fcb->firmware2_starting_sector = fw2_start_page;
+ fcb->sectors_in_firmware1 = bootstream_size_pages;
+ fcb->sectors_in_firmware2 = bootstream_size_pages;
+
+ fcb->dbbt_search_area_start_address = STRIDE_PAGES * STRIDE_COUNT;
+
+ return fcb;
+
+err:
+ free(fcb);
+ return NULL;
+}
+
+static struct mx28_nand_dbbt *mx28_nand_get_dbbt(void)
+{
+ struct mx28_nand_dbbt *dbbt;
+
+ dbbt = malloc(nand_writesize);
+ if (!dbbt) {
+ printf("MX28 NAND: Unable to allocate DBBT\n");
+ return NULL;
+ }
+
+ memset(dbbt, 0, nand_writesize);
+
+ dbbt->fingerprint = 0x54424244;
+ dbbt->version = 0x1;
+
+ return dbbt;
+}
+
+static inline uint8_t mx28_nand_parity_13_8(const uint8_t b)
+{
+ uint32_t parity = 0, tmp;
+
+ tmp = ((b >> 6) ^ (b >> 5) ^ (b >> 3) ^ (b >> 2)) & 1;
+ parity |= tmp << 0;
+
+ tmp = ((b >> 7) ^ (b >> 5) ^ (b >> 4) ^ (b >> 2) ^ (b >> 1)) & 1;
+ parity |= tmp << 1;
+
+ tmp = ((b >> 7) ^ (b >> 6) ^ (b >> 5) ^ (b >> 1) ^ (b >> 0)) & 1;
+ parity |= tmp << 2;
+
+ tmp = ((b >> 7) ^ (b >> 4) ^ (b >> 3) ^ (b >> 0)) & 1;
+ parity |= tmp << 3;
+
+ tmp = ((b >> 6) ^ (b >> 4) ^ (b >> 3) ^
+ (b >> 2) ^ (b >> 1) ^ (b >> 0)) & 1;
+ parity |= tmp << 4;
+
+ return parity;
+}
+
+static uint8_t *mx28_nand_fcb_block(struct mx28_nand_fcb *fcb)
+{
+ uint8_t *block;
+ uint8_t *ecc;
+ int i;
+
+ block = malloc(nand_writesize + nand_oobsize);
+ if (!block) {
+ printf("MX28 NAND: Unable to allocate FCB block\n");
+ return NULL;
+ }
+
+ memset(block, 0, nand_writesize + nand_oobsize);
+
+ /* Update the FCB checksum */
+ fcb->checksum = mx28_nand_block_csum(((uint8_t *)fcb) + 4, 508);
+
+ /* Figure 12-11. in iMX28RM, rev. 1, says FCB is at offset 12 */
+ memcpy(block + 12, fcb, sizeof(struct mx28_nand_fcb));
+
+ /* ECC is at offset 12 + 512 */
+ ecc = block + 12 + 512;
+
+ /* Compute the ECC parity */
+ for (i = 0; i < sizeof(struct mx28_nand_fcb); i++)
+ ecc[i] = mx28_nand_parity_13_8(block[i + 12]);
+
+ return block;
+}
+
+static int mx28_nand_write_fcb(struct mx28_nand_fcb *fcb, char *buf)
+{
+ uint32_t offset;
+ uint8_t *fcbblock;
+ int ret = 0;
+ int i;
+
+ fcbblock = mx28_nand_fcb_block(fcb);
+ if (!fcbblock)
+ return -1;
+
+ for (i = 0; i < STRIDE_PAGES * STRIDE_COUNT; i += STRIDE_PAGES) {
+ offset = i * nand_writesize;
+ memcpy(buf + offset, fcbblock, nand_writesize + nand_oobsize);
+ }
+
+ free(fcbblock);
+ return ret;
+}
+
+static int mx28_nand_write_dbbt(struct mx28_nand_dbbt *dbbt, char *buf)
+{
+ uint32_t offset;
+ int i = STRIDE_PAGES * STRIDE_COUNT;
+
+ for (; i < 2 * STRIDE_PAGES * STRIDE_COUNT; i += STRIDE_PAGES) {
+ offset = i * nand_writesize;
+ memcpy(buf + offset, dbbt, sizeof(struct mx28_nand_dbbt));
+ }
+
+ return 0;
+}
+
+static int mx28_nand_write_firmware(struct mx28_nand_fcb *fcb, int infd,
+ char *buf)
+{
+ int ret;
+ off_t size;
+ uint32_t offset1, offset2;
+
+ size = lseek(infd, 0, SEEK_END);
+ lseek(infd, 0, SEEK_SET);
+
+ offset1 = fcb->firmware1_starting_sector * nand_writesize;
+ offset2 = fcb->firmware2_starting_sector * nand_writesize;
+
+ ret = read(infd, buf + offset1, size);
+ if (ret != size)
+ return -1;
+
+ memcpy(buf + offset2, buf + offset1, size);
+
+ return 0;
+}
+
+void usage(void)
+{
+ printf(
+ "Usage: mx28image [ops] <type> <infile> <outfile>\n"
+ "Augment BootStream file with a proper header for i.MX28 boot\n"
+ "\n"
+ " <type> type of image:\n"
+ " \"nand\" for NAND image\n"
+ " \"sd\" for SD image\n"
+ " <infile> input file, the u-boot.sb bootstream\n"
+ " <outfile> output file, the bootable image\n"
+ "\n");
+ printf(
+ "For NAND boot, these options are accepted:\n"
+ " -w <size> NAND page size\n"
+ " -o <size> NAND OOB size\n"
+ " -e <size> NAND erase size\n"
+ "\n"
+ "For SD boot, these options are accepted:\n"
+ " -p <sector> Sector where the SGTL partition starts\n"
+ );
+}
+
+static int mx28_create_nand_image(int infd, int outfd)
+{
+ struct mx28_nand_fcb *fcb;
+ struct mx28_nand_dbbt *dbbt;
+ int ret = -1;
+ char *buf;
+ int size;
+ ssize_t wr_size;
+
+ size = nand_writesize * 512 + 2 * MAX_BOOTSTREAM_SIZE;
+
+ buf = malloc(size);
+ if (!buf) {
+ printf("Can not allocate output buffer of %d bytes\n", size);
+ goto err0;
+ }
+
+ memset(buf, 0, size);
+
+ fcb = mx28_nand_get_fcb(MAX_BOOTSTREAM_SIZE);
+ if (!fcb) {
+ printf("Unable to compile FCB\n");
+ goto err1;
+ }
+
+ dbbt = mx28_nand_get_dbbt();
+ if (!dbbt) {
+ printf("Unable to compile DBBT\n");
+ goto err2;
+ }
+
+ ret = mx28_nand_write_fcb(fcb, buf);
+ if (ret) {
+ printf("Unable to write FCB to buffer\n");
+ goto err3;
+ }
+
+ ret = mx28_nand_write_dbbt(dbbt, buf);
+ if (ret) {
+ printf("Unable to write DBBT to buffer\n");
+ goto err3;
+ }
+
+ ret = mx28_nand_write_firmware(fcb, infd, buf);
+ if (ret) {
+ printf("Unable to write firmware to buffer\n");
+ goto err3;
+ }
+
+ wr_size = write(outfd, buf, size);
+ if (wr_size != size) {
+ ret = -1;
+ goto err3;
+ }
+
+ ret = 0;
+
+err3:
+ free(dbbt);
+err2:
+ free(fcb);
+err1:
+ free(buf);
+err0:
+ return ret;
+}
+
+static int mx28_create_sd_image(int infd, int outfd)
+{
+ int ret = -1;
+ uint32_t *buf;
+ int size;
+ off_t fsize;
+ ssize_t wr_size;
+ struct mx28_sd_config_block *cb;
+
+ fsize = lseek(infd, 0, SEEK_END);
+ lseek(infd, 0, SEEK_SET);
+ size = fsize + 512;
+
+ buf = malloc(size);
+ if (!buf) {
+ printf("Can not allocate output buffer of %d bytes\n", size);
+ goto err0;
+ }
+
+ ret = read(infd, (uint8_t *)buf + 512, fsize);
+ if (ret != fsize) {
+ ret = -1;
+ goto err1;
+ }
+
+ cb = (struct mx28_sd_config_block *)buf;
+
+ cb->signature = 0x00112233;
+ cb->primary_boot_tag = 0x1;
+ cb->secondary_boot_tag = 0x1;
+ cb->num_copies = 1;
+ cb->drv_info[0].chip_num = 0x0;
+ cb->drv_info[0].drive_type = 0x0;
+ cb->drv_info[0].tag = 0x1;
+ cb->drv_info[0].first_sector_number = sd_sector + 1;
+ cb->drv_info[0].sector_count = (size - 1) / 512;
+
+ wr_size = write(outfd, buf, size);
+ if (wr_size != size) {
+ ret = -1;
+ goto err1;
+ }
+
+ ret = 0;
+
+err1:
+ free(buf);
+err0:
+ return ret;
+}
+
+int parse_ops(int argc, char **argv)
+{
+ int i;
+ int tmp;
+ char *end;
+ enum param {
+ PARAM_WRITE,
+ PARAM_OOB,
+ PARAM_ERASE,
+ PARAM_PART,
+ PARAM_SD,
+ PARAM_NAND
+ };
+ int type;
+
+ for (i = 1; i < argc; i++) {
+ if (!strncmp(argv[i], "-w", 2))
+ type = PARAM_WRITE;
+ else if (!strncmp(argv[i], "-o", 2))
+ type = PARAM_OOB;
+ else if (!strncmp(argv[i], "-e", 2))
+ type = PARAM_ERASE;
+ else if (!strncmp(argv[i], "-p", 2))
+ type = PARAM_PART;
+ else /* SD/MMC */
+ break;
+
+ tmp = strtol(argv[++i], &end, 10);
+ if (tmp % 2)
+ return -1;
+ if (tmp <= 0)
+ return -1;
+
+ if (type == PARAM_WRITE)
+ nand_writesize = tmp;
+ if (type == PARAM_OOB)
+ nand_oobsize = tmp;
+ if (type == PARAM_ERASE)
+ nand_erasesize = tmp;
+ if (type == PARAM_PART)
+ sd_sector = tmp;
+ }
+
+ if (strcmp(argv[i], "sd") && strcmp(argv[i], "nand"))
+ return -1;
+
+ if (i + 3 != argc)
+ return -1;
+
+ return i;
+}
+
+int main(int argc, char **argv)
+{
+ int infd, outfd;
+ int ret = 0;
+ int offset;
+
+ offset = parse_ops(argc, argv);
+ if (offset < 0) {
+ usage();
+ ret = 1;
+ goto err1;
+ }
+
+ infd = open(argv[offset + 1], O_RDONLY);
+ if (infd < 0) {
+ printf("Input BootStream file can not be opened\n");
+ ret = 2;
+ goto err1;
+ }
+
+ outfd = open(argv[offset + 2], O_CREAT | O_TRUNC | O_WRONLY,
+ S_IRUSR | S_IWUSR);
+ if (outfd < 0) {
+ printf("Output file can not be created\n");
+ ret = 3;
+ goto err2;
+ }
+
+ if (!strcmp(argv[offset], "sd"))
+ ret = mx28_create_sd_image(infd, outfd);
+ else if (!strcmp(argv[offset], "nand"))
+ ret = mx28_create_nand_image(infd, outfd);
+
+ close(outfd);
+err2:
+ close(infd);
+err1:
+ return ret;
+}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 28/31] iMX28: Add image header generator tool
2011-09-08 20:42 ` [U-Boot] [PATCH 28/31] iMX28: Add image header generator tool Marek Vasut
@ 2011-09-09 8:58 ` Stefano Babic
2011-09-09 11:51 ` Marek Vasut
0 siblings, 1 reply; 68+ messages in thread
From: Stefano Babic @ 2011-09-09 8:58 UTC (permalink / raw)
To: u-boot
On 09/08/2011 10:42 PM, Marek Vasut wrote:
> This tool can now generate proper image for "BootStream" files.
>
> NOTE: This tool now works only for NAND.
>
Hi Marek,
I have not reviewed your patch. Before starting, I have a big remark.
This is *not* the way we are implementing in u-boot to add SOC related
images. Instead of having a special tool for each SOC, we are adding new
functions to mkimage to support all SOCs we have. mkimage is able now to
generate images for several SOCs.
You have implemented a completely different one. Why ? Why cannot we add
a new image type to mkimage ?
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 28/31] iMX28: Add image header generator tool
2011-09-09 8:58 ` Stefano Babic
@ 2011-09-09 11:51 ` Marek Vasut
0 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-09 11:51 UTC (permalink / raw)
To: u-boot
On Friday, September 09, 2011 10:58:07 AM Stefano Babic wrote:
> On 09/08/2011 10:42 PM, Marek Vasut wrote:
> > This tool can now generate proper image for "BootStream" files.
> >
> > NOTE: This tool now works only for NAND.
>
> Hi Marek,
>
> I have not reviewed your patch. Before starting, I have a big remark.
>
> This is *not* the way we are implementing in u-boot to add SOC related
> images. Instead of having a special tool for each SOC, we are adding new
> functions to mkimage to support all SOCs we have. mkimage is able now to
> generate images for several SOCs.
>
> You have implemented a completely different one. Why ? Why cannot we add
> a new image type to mkimage ?
Because you run this thing only once, you don't run it every time you update
your uboot in NAND.
The path is ... compile u-boot.bin -> run external tool elftosb -> run mxsboot
Most of the time, you stop in step II, which is handled by uboot makefiles.
>
> Best regards,
> Stefano Babic
^ permalink raw reply [flat|nested] 68+ messages in thread
* [U-Boot] [PATCH 29/31] M28: Add NAND update scripts
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (27 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 28/31] iMX28: Add image header generator tool Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 30/31] i.MX28: Add u-boot.sb target to Makefile Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 31/31] M28: Add doc/README.m28 documentation Marek Vasut
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Add "update_nand_full" and "update_nand_firmware" scripts to make NAND bootable
or update NAND firmware.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
include/configs/m28evk.h | 34 ++++++++++++++++++++++++++++++++++
1 files changed, 34 insertions(+), 0 deletions(-)
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index c120c63..5ca5f98 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -239,4 +239,38 @@
#define CONFIG_LOADADDR 0x42000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+/*
+ * Extra Environments
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "update_nand_full_filename=u-boot.nand\0" \
+ "update_nand_firmware_filename=u-boot.sb\0" \
+ "update_nand_firmware_maxsz=0x100000\0" \
+ "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
+ "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
+ "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \
+ "nand device 0 ; " \
+ "nand info ; " \
+ "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
+ "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
+ "update_nand_full=" /* Update FCB, DBBT and FW */ \
+ "if tftp ${update_nand_full_filename} ; then " \
+ "run update_nand_get_fcb_size ; " \
+ "nand scrub.quiet 0x0 ${filesize} ; " \
+ "nand write.raw ${loadaddr} 0x0 ${update_nand_fcb} ; " \
+ "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
+ "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
+ "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
+ "fi\0" \
+ "update_nand_firmware=" /* Update only firmware */ \
+ "if tftp ${update_nand_firmware_filename} ; then " \
+ "run update_nand_get_fcb_size ; " \
+ "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
+ "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \
+ "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
+ "nand erase ${fcb_sz} ${fw_sz} ; " \
+ "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
+ "nand write ${loadaddr} ${fw_off} ${filesize} ; " \
+ "fi\0"
+
#endif /* __M28_H__ */
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 30/31] i.MX28: Add u-boot.sb target to Makefile
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (28 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 29/31] M28: Add NAND update scripts Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
2011-09-08 20:42 ` [U-Boot] [PATCH 31/31] M28: Add doc/README.m28 documentation Marek Vasut
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
Makefile | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/Makefile b/Makefile
index ee05fb3..90f8d3a 100644
--- a/Makefile
+++ b/Makefile
@@ -398,6 +398,10 @@ $(obj)u-boot.ubl: $(obj)u-boot-nand.bin
$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
-e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)mmc_spl/u-boot-mmc-spl.bin
+ elftosb -zdf imx28 -c mmc_spl/board/denx/m28evk/u-boot.bd \
+ -o $(obj)u-boot.sb
+
GEN_UBOOT = \
UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
@@ -980,6 +984,7 @@ clobber: clean
@rm -f $(obj)u-boot.kwb
@rm -f $(obj)u-boot.imx
@rm -f $(obj)u-boot.ubl
+ @rm -f $(obj)u-boot.sb
@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread* [U-Boot] [PATCH 31/31] M28: Add doc/README.m28 documentation
2011-09-08 20:42 [U-Boot] [PATCH 00/31] Support for the DENX M28 SoM Marek Vasut
` (29 preceding siblings ...)
2011-09-08 20:42 ` [U-Boot] [PATCH 30/31] i.MX28: Add u-boot.sb target to Makefile Marek Vasut
@ 2011-09-08 20:42 ` Marek Vasut
30 siblings, 0 replies; 68+ messages in thread
From: Marek Vasut @ 2011-09-08 20:42 UTC (permalink / raw)
To: u-boot
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
doc/README.m28 | 223 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 223 insertions(+), 0 deletions(-)
create mode 100644 doc/README.m28
diff --git a/doc/README.m28 b/doc/README.m28
new file mode 100644
index 0000000..b749ce0
--- /dev/null
+++ b/doc/README.m28
@@ -0,0 +1,223 @@
+DENX M28EVK
+===========
+
+This document describes the DENX M28/M28EVK U-Boot port. This document mostly
+covers topics related to making the module/board bootable.
+
+Terminology
+-----------
+
+The dollar symbol ($) introduces a snipped of shell code. This shall be typed
+into the unix command prompt in U-Boot source code root directory.
+
+The (=>) introduces a snipped of code that should by typed into U-Boot command
+prompt.
+
+Contents
+--------
+
+0) Files of the M28/M28EVK port
+1) Prerequisites
+2) Compiling U-Boot for M28
+3) Installation of U-Boot for M28EVK to SD card
+4) Installation of U-Boot for M28 to NAND flash
+
+0) Files of the M28/M28EVK port
+-------------------------------
+
+arch/arm/cpu/arm926ejs/mx28/ - The CPU support code for the Freescale i.MX28
+arch/arm/include/asm/arch-mx28/ - Header files for the Freescale i.MX28
+board/denx/m28evk/ - M28EVK board specific files
+include/configs/m28evk.h - M28EVK configuration file
+
+1) Prerequisites
+----------------
+
+To make the M28 module or the M28 module or M28EVK board bootable, some tools
+are necessary. The first one is the "elftosb" tool distributed by Freescale
+Semiconductor. The other tool is the "mxsboot" tool found in U-Boot source tree.
+
+Firstly, obtain the elftosb archive from the following location:
+
+ http://foss.doredevelopment.dk/mirrors/imx/elftosb-10.12.01.tar.gz
+
+We use a $VER variable here to denote the current version. At the time of
+writing of this document, that is "10.12.01". To obtain the file from command
+line, use:
+
+ $ VER="10.12.01"
+ $ wget http://foss.doredevelopment.dk/mirrors/imx/elftosb-${VER}.tar.gz
+
+Extract the file:
+
+ $ tar xzf elftosb-${VER}.tar.gz
+
+Compile the file. We need to manually tell the linker to use also libm:
+
+ $ cd elftosb-${VER}/
+ $ make LIBS="-lstdc++ -lm" elftosb
+
+Optionally, remove debugging symbols from elftosb:
+
+ $ strip bld/linux/elftosb
+
+Finally, install the "elftosb" binary. The "install" target is missing, so just
+copy the binary by hand:
+
+ $ sudo cp bld/linux/elftosb /usr/local/bin/
+
+Make sure the "elftosb" binary can be found in your $PATH, in this case this
+means "/usr/local/bin/" has to be in your $PATH.
+
+2) Compiling U-Boot for M28
+---------------------------
+
+Compiling the U-Boot for M28 is straightforward and done as compiling U-Boot
+for any other ARM device. For cross-compiler setup, please refer to ELDK5.0
+documentation. First, clean up the source code:
+
+ $ make mrproper
+
+Next, configure U-Boot for M28EVK:
+
+ $ make m28evk_config
+
+Lastly, compile U-Boot and prepare a "BootStream". The "BootStream" is a special
+type of file, which the i.MX28 CPU can boot. This is handled by the following
+command:
+
+ $ make u-boot.sb
+
+HINT: To speed-up the build process, you can add -j<N>, where N is number of
+ compiler instances that'll run in parallel.
+
+The code produces "u-boot.sb" file. This file needs to be augmented with a
+proper header to allow successful boot from SD or NAND. Adding the header is
+discussed in the following chapters.
+
+3) Installation of U-Boot for M28EVK to SD card
+-----------------------------------------------
+
+To boot an M28 from SD, set the boot mode DIP switches according to i.MX28
+manual chapter 12.2.1 (Table 12-2), PORT=SSP0, SD/MMC master on SSP0, 3.3V.
+
+An SD card the i.MX28 CPU can use to boot U-Boot must contain a DOS partition
+table, which in turn carries a partition of special type and which contains a
+special header. The rest of partitions in the DOS partition table can be used
+by the user.
+
+To prepare such partition, use your favourite partitioning tool. The partition
+must have the following parameters:
+
+ * Start sector .......... sector 2048
+ * Partition size ........ at least 1024 kb
+ * Partition type ........ 0x53 (sometimes "OnTrack DM6 Aux3")
+
+For example in Linux fdisk, the sequence for a clear card is the following:
+
+ * o ..................... create a clear partition table
+ * n ..................... create new partition
+ * p ............. primary partition
+ * 1 ............. first partition
+ * 2048 .......... first sector is 2048
+ * +1M ........... make the partition 1Mb big
+ * t 1 ................... change first partition ID
+ * 53 ............ change the ID to 0x53 (OnTrack DM6 Aux3)
+ * <create other partitions>
+ * w ..................... write partition table to disk
+
+The partition layout is ready, next the special partition must be filled with
+proper contents. The contents is generated by running the following command (see
+chapter 2)):
+
+ $ ./tools/mxsboot sd u-boot.sb u-boot.sd
+
+The resulting file, "u-boot.sd", shall then be written to the partition. In this
+case, we assume the first partition of the SD card is /dev/mmcblk0p1:
+
+ $ dd if=u-boot.sd of=/dev/mmcblk0p1
+
+Last step is to insert the card into M28EVK and boot.
+
+NOTE: If the user needs to adjust the start sector, the "mxsboot" tool contains
+ a "-p" switch for that purpose. The "-p" switch takes the sector number as
+ an argument.
+
+4) Installation of U-Boot for M28 to NAND flash
+-----------------------------------------------
+
+To boot an M28 from NAND, set the boot mode DIP switches according to i.MX28
+manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.
+
+There are two possibilities when preparing an image writable to NAND flash.
+
+ I) The NAND wasn't written at all yet or the BCB is broken
+ ----------------------------------------------------------
+ In this case, both BCB (FCB and DBBT) and firmware needs to be
+ written to NAND. To generate NAND image containing all these,
+ there is a tool called "mxsboot" in the "tools/" directory. The tool
+ is invoked on "u-boot.sb" file from chapter 2):
+
+ $ ./tools/mxsboot nand u-boot.sb u-boot.nand
+
+ NOTE: The above invokation works for NAND flash with geometry of
+ 2048b per page, 64b OOB data, 128kb erase size. If your chip
+ has a different geometry, please use:
+
+ -w <size> change page size (default 2048 b)
+ -o <size> change oob size (default 64 b)
+ -e <size> change erase size (default 131072 b)
+
+ The geometry information can be obtained from running U-Boot
+ on M28 by issuing the "nand info" command.
+
+ The resulting file, "u-boot.nand" can be written directly to NAND
+ from the U-Boot prompt. To simplify the process, the U-Boot default
+ environment contains script "update_nand_full" to update the system.
+
+ This script expects a working TFTP server containing the file
+ "u-boot.nand" in it's root directory. This can be changed by
+ adjusting the "update_nand_full_filename" varible.
+
+ To update the system, run the following in U-Boot prompt:
+
+ => run update_nand_full
+
+ In case you would only need to update the bootloader in future,
+ see II) below.
+
+ II) The NAND was already written with a good BCB
+ ------------------------------------------------
+ This part applies after the part I) above was done at least once.
+
+ If part I) above was done correctly already, there is no need to
+ write the FCB and DBBT parts of NAND again. It's possible to upgrade
+ only the bootloader image.
+
+ To simplify the process of firmware update, the U-Boot default
+ environment contains script "update_nand_firmware" to update only
+ the firmware, without rewriting FCB and DBBT.
+
+ This script expects a working TFTP server containing the file
+ "u-boot.sb" in it's root directory. This can be changed by
+ adjusting the "update_nand_firmware_filename" varible.
+
+ To update the system, run the following in U-Boot prompt:
+
+ => run update_nand_firmware
+
+ III) Special settings for the update scripts
+ --------------------------------------------
+ There is a slight possibility of the user wanting to adjust the
+ STRIDE and COUNT options of the NAND boot. For description of these,
+ see i.MX28 manual section 12.12.1.2 and 12.12.1.3.
+
+ The update scripts take this possibility into account. In case the
+ user changes STRIDE by blowing fuses, the user also has to change
+ "update_nand_stride" variable. In case the user changes COUNT by
+ blowing fuses, the user also has to change "update_nand_count"
+ variable for the update scripts to work correctly.
+
+ In case the user needs to boot a firmware image bigger than 1Mb, the
+ user has to adjust the "update_nand_firmware_maxsz" variable for the
+ update scripts to work properly.
--
1.7.5.4
^ permalink raw reply related [flat|nested] 68+ messages in thread