[U-Boot] [PATCH v6] dreamplug: initial board support.

[Igor Grinberg <grinberg@compulab.co.il>]

Sorry for jumping in that late...


On 09/12/11 01:10, u-boot at lakedaemon.net wrote:
> From: Jason Cooper <u-boot@lakedaemon.net>
> 
> Copied wholeheartedly from board/Marvell/guruplug and modified to add support
> for SPI NOR flash.
> 
> CONFIG_MACH_DREAMPLUG defined in include/configs/dreamplug.h until Linus's
> kernel.org tree adds it to mach-types.h.  Once it trickles down, the definition
> can be removed from dreamplug.h.
> 
> Signed-off-by: Jason Cooper <u-boot@lakedaemon.net>
> ---

[...]
 
> diff --git a/board/Marvell/dreamplug/dreamplug.c b/board/Marvell/dreamplug/dreamplug.c
> new file mode 100644
> index 0000000..cff3e9d
> --- /dev/null
> +++ b/board/Marvell/dreamplug/dreamplug.c

[...]

> +
> +int board_init(void)
> +{
> +	/* arch number of board */
> +	gd->bd->bi_arch_number = MACH_TYPE_DREAMPLUG;

This should be done in the board config file.
Please, see the CONFIG_MACH_TYPE in the U-Boot documentation (README file).

[...]

> diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h
> new file mode 100644
> index 0000000..003d201
> --- /dev/null
> +++ b/include/configs/dreamplug.h

[...]

> +/*
> + * FIXME: This belongs in mach-types.h.  However, we only pull mach-types
> + * from Linus' kernel.org tree.  This hasn't been updated primarily due to
> + * the recent arch/arm reshuffling.  So, in the meantime, we'll place it
> + * here.
> + */
> +#define MACH_TYPE_DREAMPLUG            3550
> +
> +#ifdef CONFIG_MACH_DREAMPLUG
> +# ifdef machine_arch_type
> +#  undef machine_arch_type
> +#  define machine_arch_type	__machine_arch_type
> +# else
> +#  define machine_arch_type	MACH_TYPE_DREAMPLUG
> +# endif
> +# define machine_is_dreamplug()	(machine_arch_type == MACH_TYPE_DREAMPLUG)
> +#else
> +# define machine_is_dreamplug()	(0)
> +#endif
> +

#define CONFIG_MACH_TYPE	MACH_TYPE_DREAMPLUG
should be added here... and should remain after you remove the
above as in FIXME.



-- 
Regards,
Igor.