From: Igor Grinberg <grinberg@compulab.co.il>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Date: Thu, 15 Sep 2011 10:39:14 +0300 [thread overview]
Message-ID: <4E71ABA2.7010305@compulab.co.il> (raw)
In-Reply-To: <1316066380-7397-9-git-send-email-hs@denx.de>
Hi Heiko,
On 09/15/11 08:59, Heiko Schocher wrote:
> - booting from NOR Flash with direct boot method
> - POST support
> - LOGBUF support
>
> Signed-off-by: Heiko Schocher <hs@denx.de>
> Cc: Paulraj Sandeep <s-paulraj@ti.com>
> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
> ---
[...]
> diff --git a/board/enbw/enbw_cmc/enbw_cmc.c b/board/enbw/enbw_cmc/enbw_cmc.c
> new file mode 100644
> index 0000000..1b9ee67
> --- /dev/null
> +++ b/board/enbw/enbw_cmc/enbw_cmc.c
[...]
> +
> +int board_init(void)
> +{
> +#ifndef CONFIG_USE_IRQ
> + irq_init();
> +#endif
> +
> + /* arch number of the board */
> + gd->bd->bi_arch_number = 3585;
There is a new standard option for assigning the machid.
Now, this should be done in the board config file and the above two lines removed.
Please, see the CONFIG_MACH_TYPE in the U-Boot documentation (README file).
[...]
> diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
> new file mode 100644
> index 0000000..5de752f
> --- /dev/null
> +++ b/include/configs/enbw_cmc.h
[...]
> +/*
> + * Board
> + */
> +#define CONFIG_DRIVER_TI_EMAC
> +#define CONFIG_USE_NAND
Consider adding here:
#define MACH_TYPE_ENBW_CMC 3585
#define CONFIG_MACH_TYPE MACH_TYPE_ENBW_CMC
[...]
--
Regards,
Igor.
next prev parent reply other threads:[~2011-09-15 7:39 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-15 5:59 [U-Boot] [PATCH 0/8] arm, davinci: add support for the am1808 based enbw_cmc board Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 1/8] arm, davinci: add SYSCFG1 base and register struct Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 2/8] arm, davinci: add some missing defines in hardware.h Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 3/8] arm, davinci, am1808, gpio: add missing defines for bank 8 Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 4/8] arm, davinci: add ddr2 definition Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 5/8] arm, davinci: add NOR Boot Configuration Word Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR Heiko Schocher
2011-09-26 8:02 ` Christian Riesch
2011-09-26 8:28 ` Heiko Schocher
2011-09-27 6:57 ` Christian Riesch
2011-09-27 7:27 ` Heiko Schocher
2011-09-27 8:37 ` Christian Riesch
2011-09-27 8:50 ` Heiko Schocher
2011-09-27 10:36 ` Christian Riesch
2011-09-27 11:18 ` Heiko Schocher
2011-09-30 6:57 ` Christian Riesch
2011-09-30 7:11 ` Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 7/8] arm, davinci, da8xx: add cpuinfo Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 8/8] arm, davinci: add support for am1808 based enbw_cmc board Heiko Schocher
2011-09-15 7:39 ` Igor Grinberg [this message]
2011-09-15 7:56 ` Heiko Schocher
2011-09-19 5:50 ` [U-Boot] [PATCH v2 " Heiko Schocher
2011-09-23 20:47 ` Paulraj, Sandeep
2011-09-26 5:43 ` Heiko Schocher
2011-09-26 6:03 ` Paulraj, Sandeep
2011-09-26 6:08 ` Heiko Schocher
2011-09-27 7:05 ` Albert ARIBAUD
2011-09-30 7:55 ` Christian Riesch
2011-09-30 8:46 ` Heiko Schocher
2011-09-30 9:02 ` Christian Riesch
2011-09-30 9:32 ` Heiko Schocher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E71ABA2.7010305@compulab.co.il \
--to=grinberg@compulab.co.il \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox