From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 8/8] arm, davinci: add support for am1808 based enbw_cmc board
Date: Thu, 15 Sep 2011 09:56:51 +0200 [thread overview]
Message-ID: <4E71AFC3.904@denx.de> (raw)
In-Reply-To: <4E71ABA2.7010305@compulab.co.il>
Hello Igor,
Igor Grinberg wrote:
> Hi Heiko,
>
> On 09/15/11 08:59, Heiko Schocher wrote:
>> - booting from NOR Flash with direct boot method
>> - POST support
>> - LOGBUF support
>>
>> Signed-off-by: Heiko Schocher <hs@denx.de>
>> Cc: Paulraj Sandeep <s-paulraj@ti.com>
>> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
>> ---
>
> [...]
>
>> diff --git a/board/enbw/enbw_cmc/enbw_cmc.c b/board/enbw/enbw_cmc/enbw_cmc.c
>> new file mode 100644
>> index 0000000..1b9ee67
>> --- /dev/null
>> +++ b/board/enbw/enbw_cmc/enbw_cmc.c
>
> [...]
>
>> +
>> +int board_init(void)
>> +{
>> +#ifndef CONFIG_USE_IRQ
>> + irq_init();
>> +#endif
>> +
>> + /* arch number of the board */
>> + gd->bd->bi_arch_number = 3585;
>
> There is a new standard option for assigning the machid.
> Now, this should be done in the board config file and the above two lines removed.
> Please, see the CONFIG_MACH_TYPE in the U-Boot documentation (README file).
Ah, thanks!
> [...]
>
>> diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
>> new file mode 100644
>> index 0000000..5de752f
>> --- /dev/null
>> +++ b/include/configs/enbw_cmc.h
>
> [...]
>
>> +/*
>> + * Board
>> + */
>> +#define CONFIG_DRIVER_TI_EMAC
>> +#define CONFIG_USE_NAND
>
> Consider adding here:
> #define MACH_TYPE_ENBW_CMC 3585
> #define CONFIG_MACH_TYPE MACH_TYPE_ENBW_CMC
Yep! Change this for v2, thanks!
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2011-09-15 7:56 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-15 5:59 [U-Boot] [PATCH 0/8] arm, davinci: add support for the am1808 based enbw_cmc board Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 1/8] arm, davinci: add SYSCFG1 base and register struct Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 2/8] arm, davinci: add some missing defines in hardware.h Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 3/8] arm, davinci, am1808, gpio: add missing defines for bank 8 Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 4/8] arm, davinci: add ddr2 definition Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 5/8] arm, davinci: add NOR Boot Configuration Word Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR Heiko Schocher
2011-09-26 8:02 ` Christian Riesch
2011-09-26 8:28 ` Heiko Schocher
2011-09-27 6:57 ` Christian Riesch
2011-09-27 7:27 ` Heiko Schocher
2011-09-27 8:37 ` Christian Riesch
2011-09-27 8:50 ` Heiko Schocher
2011-09-27 10:36 ` Christian Riesch
2011-09-27 11:18 ` Heiko Schocher
2011-09-30 6:57 ` Christian Riesch
2011-09-30 7:11 ` Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 7/8] arm, davinci, da8xx: add cpuinfo Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 8/8] arm, davinci: add support for am1808 based enbw_cmc board Heiko Schocher
2011-09-15 7:39 ` Igor Grinberg
2011-09-15 7:56 ` Heiko Schocher [this message]
2011-09-19 5:50 ` [U-Boot] [PATCH v2 " Heiko Schocher
2011-09-23 20:47 ` Paulraj, Sandeep
2011-09-26 5:43 ` Heiko Schocher
2011-09-26 6:03 ` Paulraj, Sandeep
2011-09-26 6:08 ` Heiko Schocher
2011-09-27 7:05 ` Albert ARIBAUD
2011-09-30 7:55 ` Christian Riesch
2011-09-30 8:46 ` Heiko Schocher
2011-09-30 9:02 ` Christian Riesch
2011-09-30 9:32 ` Heiko Schocher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E71AFC3.904@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox