[U-Boot] [PATCH] MX31: Improve readability for reset cause

[U-Boot] [PATCH] MX31: Improve readability for reset cause

[Fabio Estevam]

Currently the reset cause is printed like:
CPU:   Freescale i.MX31 rev 2.0 at 531 MHz.Reset cause: POR

Improve readability by adding a new line like it is done on other i.MX boards.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 arch/arm/cpu/arm1136/mx31/generic.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c
index e3a4d1b..c6def5d 100644
--- a/arch/arm/cpu/arm1136/mx31/generic.c
+++ b/arch/arm/cpu/arm1136/mx31/generic.c
@@ -180,7 +180,7 @@ int print_cpuinfo (void)
 {
 	u32 srev = get_cpu_rev();
 
-	printf("CPU:   Freescale i.MX31 rev %d.%d%s at %d MHz.",
+	printf("CPU:   Freescale i.MX31 rev %d.%d%s at %d MHz.\n",
 			(srev & 0xF0) >> 4, (srev & 0x0F),
 			((srev & 0x8000) ? " unknown" : ""),
 			mx31_get_mcu_main_clk() / 1000000);
-- 
1.6.0.4

[U-Boot] [PATCH] MX31: Improve readability for reset cause

[Stefano Babic]

On 09/16/2011 04:01 PM, Fabio Estevam wrote:
> Currently the reset cause is printed like:
> CPU:   Freescale i.MX31 rev 2.0 at 531 MHz.Reset cause: POR
> 
> Improve readability by adding a new line like it is done on other i.MX boards.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  arch/arm/cpu/arm1136/mx31/generic.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c
> index e3a4d1b..c6def5d 100644
> --- a/arch/arm/cpu/arm1136/mx31/generic.c
> +++ b/arch/arm/cpu/arm1136/mx31/generic.c
> @@ -180,7 +180,7 @@ int print_cpuinfo (void)
>  {
>  	u32 srev = get_cpu_rev();
>  
> -	printf("CPU:   Freescale i.MX31 rev %d.%d%s at %d MHz.",
> +	printf("CPU:   Freescale i.MX31 rev %d.%d%s at %d MHz.\n",
>  			(srev & 0xF0) >> 4, (srev & 0x0F),
>  			((srev & 0x8000) ? " unknown" : ""),
>  			mx31_get_mcu_main_clk() / 1000000);

Applied to u-boot-imx, next branch, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================