* [U-Boot] new image for Freescale MPC8313
@ 2011-09-21 12:05 David Pauli
2011-09-21 18:44 ` Scott Wood
0 siblings, 1 reply; 2+ messages in thread
From: David Pauli @ 2011-09-21 12:05 UTC (permalink / raw)
To: u-boot
Hey guys,
I search a new, updated, image with kernel for Freescale MPC8313-RD-Board.
There is only a version with an u-boot-version of 2008.
Is there any image? Or is there a possibility to build my own image?
So long, David
--
David Pauli
--
Am Ehrenberg 6
98693 Ilmenau
dp at bepeppered.net
#303-930-107
(+49) 173 7429379
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] new image for Freescale MPC8313
2011-09-21 12:05 [U-Boot] new image for Freescale MPC8313 David Pauli
@ 2011-09-21 18:44 ` Scott Wood
0 siblings, 0 replies; 2+ messages in thread
From: Scott Wood @ 2011-09-21 18:44 UTC (permalink / raw)
To: u-boot
On 09/21/2011 07:05 AM, David Pauli wrote:
> Hey guys,
>
> I search a new, updated, image with kernel for Freescale MPC8313-RD-Board.
> There is only a version with an u-boot-version of 2008.
>
> Is there any image? Or is there a possibility to build my own image?
Just build the current mainline U-Boot tree (or most recent release).
Assuming you're booting from NOR flash (this is the default
configuration), you'll want to configure the target as MPC8313ERDB_33 or
MPC8313ERDB_66, depending on your board's crystal frequency. Early
revisions of mpc8313erdb used 66 MHz, later revisions use 33 MHz.
-Scott
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-09-21 18:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-09-21 12:05 [U-Boot] new image for Freescale MPC8313 David Pauli
2011-09-21 18:44 ` Scott Wood
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox