[U-Boot] [PATCH v3] net: axi_ethernet: Add driver to u-boot

[Michal Simek <monstr@monstr.eu>]

Michal Simek wrote:
> Add axi_ethernet driver for little-endian Microblaze.
> 
> RX/TX BDs and rxframe buffer are shared among all axi_ethernet MACs.
> Only one MAC can work in one time.
> 
> Signed-off-by: Michal Simek <monstr@monstr.eu>
> 
> ---
> 
> v2: Fix cammelcase weirdness
>     Create mdio_wait function with timeouts
>     Synchronize debug messages
>     Remove base address + offset notation -> use struct instead
> 
> v3: Fix comments
>     Add timeouts/delays to waiting loops
>     Use in/out_be32 for dma accesses
>     Setup return values for phy functions
> ---
>  drivers/net/Makefile          |    1 +
>  drivers/net/xilinx_axi_emac.c |  664 +++++++++++++++++++++++++++++++++++++++++
>  include/netdev.h              |    2 +
>  3 files changed, 667 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/net/xilinx_axi_emac.c

Any comment?

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian