[U-Boot] mx51+ide+problem

[Stefano Babic <sbabic@denx.de>]

On 09/26/2011 12:15 PM, Georgy Obraztsov wrote:
> Ok. I do queston another words.

Please stop sending only private e-mails. You must *always* send your
question to the ML, too.

> I have i.mx51 processor with Compact Flash interface connected. How i
> can compile u-boot for this configuration. U-boot-2011.09-rc1 does not
> rules in make file for i.mx51.

If you have a custom board, you have to *port* u-boot to your board,
taking as reference one of the boards officially maintained in u-boot
that make use of this processor. If you simply grep into the
include/configs directory, you will find 3 boards:

	mx51evk
	vision2
	efikamx

The last one uses the PATA driver to access an hardisk - as you need to
access the CF. Do not expect everything is working without matching the
code with your hardware.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================