[U-Boot] Building u-boot for Walnut board (PPC 405GPr)

[Brian S. Park <brian.park@corelis.com>]

Thanks for the reply.
I was in the process updating ELDK from 4.1 to 4.2 and must have had 
something screwed up. I tried again Today and it compiles without error.

Thanks for looking into this and helping a newbie.

Brian

On 9/24/2011 3:05 AM, Anatolij Gustschin wrote:
> Hi,
>
> On Fri, 23 Sep 2011 18:11:28 -0700
> "Brian S. Park"<brian.park@corelis.com>  wrote:
>
>> Hi,
>> I'm currently working on updating the firmware on our custom board
>> (based on IBM walnut board) and tried to build the latest released
>> u-boot 2011.06 using ELDK4.2.
>> Using the fresh source code extracted from u-boot-2011.06.tar.bz2,  I
>> did "make walnut_config" and then "make". But I get the following error.
>>
>> ppc_4xx-ld:u-boot.lds:1: parse error
>> make: *** [u-boot] Error 1
>>
>> All of the code compiles. I think it's a linker error but I have no idea
>> how to resolve the problem.
>> Any help would be appreciated.
> $ wget -c ftp://ftp.denx.de/pub/u-boot/u-boot-2011.06.tar.bz2
> $ tar xf u-boot-2011.06.tar.bz2
> $ cd u-boot-2011.06/
> $ export CROSS_COMPILE=ppc_4xx-
> $ ./MAKEALL walnut
> Configuring for walnut board...
>     text    data     bss     dec     hex filename
>   219550   19468   42544  281562   44bda ./u-boot
>
> --------------------- SUMMARY ----------------------------
> Boards compiled: 1
> ----------------------------------------------------------
>
> There is no such problem with walnut board in the v2011.06 release.
> Please double-check our source.
>
> HTH,
> Anatolij
>


-- 
*Boundary-scan with limited budget, insufficient resources, or tight 
schedules? Try TestGenie! 
<http://www.corelis.com/products-JTAG/TestGenie-Boundary-Scan.htm>*
*Need a JTAG Refresher? Sign Up for a Free Boundary-Scan Training Class 
Today! 
<http://www.corelis.com/education/JTAG_Boundary-Scan_Seminars_and_Training.htm>*