[U-Boot] Building u-boot for Walnut board (PPC 405GPr)

From: Brian S. Park <brian.park@corelis.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Building u-boot for Walnut board (PPC 405GPr)
Date: Mon, 26 Sep 2011 10:54:57 -0700	[thread overview]
Message-ID: <4E80BC71.4000802@corelis.com> (raw)
In-Reply-To: <4E80A659.4080707@corelis.com>

I found my problem.

My board, though based on walnut board, does not have real time clock. 
So, I have to disable RTC support in u-boot. However, as soon as I 
comment out

#define CONFIG_RTC_DS174x    1    /* use DS1743 RTC in Walnut    */

in walnut.h, line 68, I get build error.

[root at new-linuxdev u-boot-2011.06]# ./MAKEALL walnut
Configuring for walnut board...
ppc_4xx-ld:u-boot.lds:1: ignoring invalid character `#' in expression
ppc_4xx-ld:u-boot.lds:1: parse error
make: *** [u-boot] Error 1
ppc_4xx-size: './u-boot': No such file

--------------------- SUMMARY ----------------------------
Boards compiled: 1
Boards with warnings or errors: 1 ( walnut )
----------------------------------------------------------
[root at new-linuxdev u-boot-2011.06]#

I can figure my way out if it's a code problem. This, however, seems 
like a configuration issue and I'm still a newbie when it comes to 
u-boot configuration issue. It seems to have changed a lot since last 
time I looked at u-boot a few years ago.

I'd appreciate some guidance.

Thank you in advance for any help and thank you all for putting such 
wonderful software in public domain.

Brian

On 9/26/2011 9:20 AM, Brian S. Park wrote:
> Thanks for the reply.
> I was in the process updating ELDK from 4.1 to 4.2 and must have had 
> something screwed up. I tried again Today and it compiles without error.
>
> Thanks for looking into this and helping a newbie.
>
> Brian
>
> On 9/24/2011 3:05 AM, Anatolij Gustschin wrote:
>> Hi,
>>
>> On Fri, 23 Sep 2011 18:11:28 -0700
>> "Brian S. Park"<brian.park@corelis.com>  wrote:
>>
>>> Hi,
>>> I'm currently working on updating the firmware on our custom board
>>> (based on IBM walnut board) and tried to build the latest released
>>> u-boot 2011.06 using ELDK4.2.
>>> Using the fresh source code extracted from u-boot-2011.06.tar.bz2,  I
>>> did "make walnut_config" and then "make". But I get the following 
>>> error.
>>>
>>> ppc_4xx-ld:u-boot.lds:1: parse error
>>> make: *** [u-boot] Error 1
>>>
>>> All of the code compiles. I think it's a linker error but I have no 
>>> idea
>>> how to resolve the problem.
>>> Any help would be appreciated.
>> $ wget -c ftp://ftp.denx.de/pub/u-boot/u-boot-2011.06.tar.bz2
>> $ tar xf u-boot-2011.06.tar.bz2
>> $ cd u-boot-2011.06/
>> $ export CROSS_COMPILE=ppc_4xx-
>> $ ./MAKEALL walnut
>> Configuring for walnut board...
>>     text    data     bss     dec     hex filename
>>   219550   19468   42544  281562   44bda ./u-boot
>>
>> --------------------- SUMMARY ----------------------------
>> Boards compiled: 1
>> ----------------------------------------------------------
>>
>> There is no such problem with walnut board in the v2011.06 release.
>> Please double-check our source.
>>
>> HTH,
>> Anatolij
>>
>
>
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

-- 
*Boundary-scan with limited budget, insufficient resources, or tight 
schedules? Try TestGenie! 
<http://www.corelis.com/products-JTAG/TestGenie-Boundary-Scan.htm>*
*Need a JTAG Refresher? Sign Up for a Free Boundary-Scan Training Class 
Today! 
<http://www.corelis.com/education/JTAG_Boundary-Scan_Seminars_and_Training.htm>* 