From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR
Date: Tue, 27 Sep 2011 09:27:45 +0200 [thread overview]
Message-ID: <4E817AF1.6090502@denx.de> (raw)
In-Reply-To: <CABkLObrh-c1EEYQ-hWxEV-i58J1oy_fv5VcZ51zPDscq91BZDw@mail.gmail.com>
Hello Christian,
Christian Riesch wrote:
> Hello Heiko,
> Thank you for your reply. I have just noticed that the patches have
> already been pulled into arm/next so I guess I am quite late with my
> comments. I'd like to apologize for this; apparently I need another
No problem. Thanks for your reply!
> email filter that also filters for messages containing "am1808" and
> not only "da850" ;-)
;-)
> Which brings me to my next point: AFAIK Texas Instruments's AM18xx
> SoCs, their OMAP-L138, and their DA850 based devices basically differ
> only in the DSP/PRU part of the device. If you are (like in u-boot)
> only interested in the ARM part of chip, they are basically the same
> device. For some reason the Linux kernel and u-boot support for all
> these devices is labelled da850... Although I have no hardware to test
> it, I guess that your DDR memory controller initialization code could
> be used for the OMAP-L138 and the corresponding Davinci device as
> well. So since all code in u-boot for the entire device family is
> labelled da850... I guess your DDR initialization functions should get
> this prefix as well for consistency. Any comments from the
> maintainers/TI employees who know these devices better than I do?
Yes of course, such a rename should be done, if somebody has tested it!
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2011-09-27 7:27 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-15 5:59 [U-Boot] [PATCH 0/8] arm, davinci: add support for the am1808 based enbw_cmc board Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 1/8] arm, davinci: add SYSCFG1 base and register struct Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 2/8] arm, davinci: add some missing defines in hardware.h Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 3/8] arm, davinci, am1808, gpio: add missing defines for bank 8 Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 4/8] arm, davinci: add ddr2 definition Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 5/8] arm, davinci: add NOR Boot Configuration Word Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR Heiko Schocher
2011-09-26 8:02 ` Christian Riesch
2011-09-26 8:28 ` Heiko Schocher
2011-09-27 6:57 ` Christian Riesch
2011-09-27 7:27 ` Heiko Schocher [this message]
2011-09-27 8:37 ` Christian Riesch
2011-09-27 8:50 ` Heiko Schocher
2011-09-27 10:36 ` Christian Riesch
2011-09-27 11:18 ` Heiko Schocher
2011-09-30 6:57 ` Christian Riesch
2011-09-30 7:11 ` Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 7/8] arm, davinci, da8xx: add cpuinfo Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 8/8] arm, davinci: add support for am1808 based enbw_cmc board Heiko Schocher
2011-09-15 7:39 ` Igor Grinberg
2011-09-15 7:56 ` Heiko Schocher
2011-09-19 5:50 ` [U-Boot] [PATCH v2 " Heiko Schocher
2011-09-23 20:47 ` Paulraj, Sandeep
2011-09-26 5:43 ` Heiko Schocher
2011-09-26 6:03 ` Paulraj, Sandeep
2011-09-26 6:08 ` Heiko Schocher
2011-09-27 7:05 ` Albert ARIBAUD
2011-09-30 7:55 ` Christian Riesch
2011-09-30 8:46 ` Heiko Schocher
2011-09-30 9:02 ` Christian Riesch
2011-09-30 9:32 ` Heiko Schocher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E817AF1.6090502@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox