[U-Boot] [PATCH] MX5: Make IPU display output and pixel format configurable

[Stefano Babic <sbabic@denx.de>]

On 09/27/2011 02:09 PM, Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> ---
>  drivers/video/mxc_ipuv3_fb.c |   14 ++++++++++++--
>  1 files changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c
> index a66981c..c4443e8 100644
> --- a/drivers/video/mxc_ipuv3_fb.c
> +++ b/drivers/video/mxc_ipuv3_fb.c
> @@ -42,6 +42,16 @@
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> +/* Use DISP #1 by default. */
> +#ifndef	CONFIG_VIDEO_MX5_OUTPUT
> +#define	CONFIG_VIDEO_MX5_OUTPUT	0
> +#endif
> +
> +/* Use RGB666 pixel format by default. */
> +#ifndef	CONFIG_VIDEO_MX5_PIXFMT
> +#define	CONFIG_VIDEO_MX5_PIXFMT	IPU_PIX_FMT_RGB666
> +#endif
> +
>  void *lcd_base;			/* Start of framebuffer memory	*/
>  void *lcd_console_address;	/* Start of console buffer	*/
>  
> @@ -550,7 +560,7 @@ static int mxcfb_probe(u32 interface_pix_fmt, struct fb_videomode *mode)
>  		mxcfbi->blank = FB_BLANK_POWERDOWN;
>  	}
>  
> -	mxcfbi->ipu_di = 0;
> +	mxcfbi->ipu_di = CONFIG_VIDEO_MX5_OUTPUT;
>  
>  	ipu_disp_set_global_alpha(mxcfbi->ipu_ch, 1, 0x80);
>  	ipu_disp_set_color_key(mxcfbi->ipu_ch, 0, 0);
> @@ -636,7 +646,7 @@ int mx51_fb_init(struct fb_videomode *mode)
>  	lcd_base += 56;
>  
>  	debug("Framebuffer at 0x%x\n", (unsigned int)lcd_base);
> -	ret = mxcfb_probe(IPU_PIX_FMT_RGB666, mode);
> +	ret = mxcfb_probe(CONFIG_VIDEO_MX5_PIXFMT, mode);
>  

What about to not use a CONFIG_ ? at the moment, the board code calls
mx51_fb_init() to initialize the display parameter. We can add a second
parameter (display_id) to the initialization and the board code is
responsible to do that. And it is not required to recompile u-boot if
the board as the mx51evk more as one display has or can have.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================