[U-Boot] mx51+ide+problem

[Stefano Babic <sbabic@denx.de>]

On 09/28/2011 08:04 AM, Georgy Obraztsov wrote:
> u-boot-2011.09-rc2.tar.bz2
> make mx51evk (default config)
> make
> ...
> /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld:
> u-boot: warning: allocated section `.bss' not in segment
> /bin/bash: line 1: 21220 Segmentation fault
> /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-non
> ... none-linux-gnueabi/4.1.2 -lgcc -Map u-boot.map -o u-boot
> make: *** [u-boot] Error 139

Your toolchain is too old, this could be a reason. However, you have not
shown the full error message. I see the warning, but the real error war
before.

Building mx51evk is successfully on my site:

./MAKEALL mx51evk
Configuring for mx51evk - Board: mx51evk, Options:
IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
   text	   data	    bss	    dec	    hex	filename
 202684	   4068	 218468	 425220	  67d04	./u-boot

--------------------- SUMMARY ----------------------------
Boards compiled: 1
----------------------------------------------------------

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================