From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Wed, 28 Sep 2011 09:33:40 +0200 Subject: [U-Boot] mx51+ide+problem In-Reply-To: References: <4E7B4A42.4090701@denx.de> <4E7B630C.3030508@denx.de> <4E804651.9080201@denx.de> <4E80612F.3000100@denx.de> Message-ID: <4E82CDD4.3010508@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 09/28/2011 08:04 AM, Georgy Obraztsov wrote: > u-boot-2011.09-rc2.tar.bz2 > make mx51evk (default config) > make > ... > /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-ld: > u-boot: warning: allocated section `.bss' not in segment > /bin/bash: line 1: 21220 Segmentation fault > /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-non > ... none-linux-gnueabi/4.1.2 -lgcc -Map u-boot.map -o u-boot > make: *** [u-boot] Error 139 Your toolchain is too old, this could be a reason. However, you have not shown the full error message. I see the warning, but the real error war before. Building mx51evk is successfully on my site: ./MAKEALL mx51evk Configuring for mx51evk - Board: mx51evk, Options: IMX_CONFIG=board/freescale/mx51evk/imximage.cfg text data bss dec hex filename 202684 4068 218468 425220 67d04 ./u-boot --------------------- SUMMARY ---------------------------- Boards compiled: 1 ---------------------------------------------------------- Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================