[U-Boot] [PATCH] MX51: vision2: Set global macros

[Stefano Babic <sbabic@denx.de>]

On 09/29/2011 03:34 AM, Marek Vasut wrote:
> On Wednesday, September 28, 2011 12:09:17 PM Stefano Babic wrote:
>> Adapt vision2 to the current u-boot version. Drop
>> own macros to set global data and use the common ones.
>>
>> Signed-off-by: Stefano Babic <sbabic@denx.de>
>> ---
>>  include/configs/vision2.h |   17 +++++++++--------
>>  1 files changed, 9 insertions(+), 8 deletions(-)
>>
>> diff --git a/include/configs/vision2.h b/include/configs/vision2.h
>> index 16ed975..c07cee4 100644
>> --- a/include/configs/vision2.h
>> +++ b/include/configs/vision2.h
>> @@ -192,14 +192,15 @@
>>  #define PHYS_SDRAM_1_SIZE		(256 * 1024 * 1024)
>>  #define PHYS_SDRAM_2			CSD1_BASE_ADDR
>>  #define PHYS_SDRAM_2_SIZE		(256 * 1024 * 1024)
>> -#define CONFIG_SYS_SDRAM_BASE		0x90000000
>> -#define CONFIG_SYS_INIT_RAM_ADDR	0x1FFE8000
>> -
>> -#define CONFIG_SYS_INIT_RAM_SIZE		(64 * 1024)
>> -#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
>> -					GENERATED_GBL_DATA_SIZE)
>> -#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
>> -					CONFIG_SYS_GBL_DATA_OFFSET)
>> +#define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
>> +#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
>> +#define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)
> 
> Arent the parentheses redundant here?

I will drop in V2.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================