From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR
Date: Fri, 30 Sep 2011 09:11:28 +0200 [thread overview]
Message-ID: <4E856BA0.5010201@denx.de> (raw)
In-Reply-To: <CABkLObrWK-AVYy3mEm5JH8ioq0YR-ZNyy-OJVP+pwp=AZsSUTw@mail.gmail.com>
Hello Christian,
Christian Riesch wrote:
> Heiko,
>
> On Thu, Sep 15, 2011 at 7:59 AM, Heiko Schocher <hs@denx.de> wrote:
>> Signed-off-by: Heiko Schocher <hs@denx.de>
>> Cc: Paulraj Sandeep <s-paulraj@ti.com>
>> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
>> ---
>> arch/arm/cpu/arm926ejs/davinci/Makefile | 1 +
>> arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c | 428 ++++++++++++++++++++
>> .../arm/include/asm/arch-davinci/am1808_lowlevel.h | 44 ++
>> 3 files changed, 473 insertions(+), 0 deletions(-)
>> create mode 100644 arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
>> create mode 100644 arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
>>
>> diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile
>> index b38623a..0310957 100644
>> --- a/arch/arm/cpu/arm926ejs/davinci/Makefile
>> +++ b/arch/arm/cpu/arm926ejs/davinci/Makefile
>> @@ -28,6 +28,7 @@ include $(TOPDIR)/config.mk
>> LIB = $(obj)lib$(SOC).o
>>
>> COBJS-y += cpu.o timer.o psc.o
>> +COBJS-$(CONFIG_AM18018_LOWLEVEL) += am1808_lowlevel.o
>
> AM18018 - is this intended or just a typo?
Just a typo, thanks for detecting!
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2011-09-30 7:11 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-15 5:59 [U-Boot] [PATCH 0/8] arm, davinci: add support for the am1808 based enbw_cmc board Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 1/8] arm, davinci: add SYSCFG1 base and register struct Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 2/8] arm, davinci: add some missing defines in hardware.h Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 3/8] arm, davinci, am1808, gpio: add missing defines for bank 8 Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 4/8] arm, davinci: add ddr2 definition Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 5/8] arm, davinci: add NOR Boot Configuration Word Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 6/8] arm, davinci, am1808: add lowlevel functions for booting from NOR Heiko Schocher
2011-09-26 8:02 ` Christian Riesch
2011-09-26 8:28 ` Heiko Schocher
2011-09-27 6:57 ` Christian Riesch
2011-09-27 7:27 ` Heiko Schocher
2011-09-27 8:37 ` Christian Riesch
2011-09-27 8:50 ` Heiko Schocher
2011-09-27 10:36 ` Christian Riesch
2011-09-27 11:18 ` Heiko Schocher
2011-09-30 6:57 ` Christian Riesch
2011-09-30 7:11 ` Heiko Schocher [this message]
2011-09-15 5:59 ` [U-Boot] [PATCH 7/8] arm, davinci, da8xx: add cpuinfo Heiko Schocher
2011-09-15 5:59 ` [U-Boot] [PATCH 8/8] arm, davinci: add support for am1808 based enbw_cmc board Heiko Schocher
2011-09-15 7:39 ` Igor Grinberg
2011-09-15 7:56 ` Heiko Schocher
2011-09-19 5:50 ` [U-Boot] [PATCH v2 " Heiko Schocher
2011-09-23 20:47 ` Paulraj, Sandeep
2011-09-26 5:43 ` Heiko Schocher
2011-09-26 6:03 ` Paulraj, Sandeep
2011-09-26 6:08 ` Heiko Schocher
2011-09-27 7:05 ` Albert ARIBAUD
2011-09-30 7:55 ` Christian Riesch
2011-09-30 8:46 ` Heiko Schocher
2011-09-30 9:02 ` Christian Riesch
2011-09-30 9:32 ` Heiko Schocher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E856BA0.5010201@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox