[U-Boot] [PATCH 2/3] nand: Add common functions to nand.h

[Scott Wood <scottwood@freescale.com>]

On 09/29/2011 02:44 AM, Simon Schwarz wrote:
> Functions often used in SPL are now part of nand.h.
> 
> Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
> ---
>  include/nand.h |   10 +++++++---
>  1 files changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/include/nand.h b/include/nand.h
> index b4140794..980408a 100644
> --- a/include/nand.h
> +++ b/include/nand.h
> @@ -135,9 +135,6 @@ int nand_get_lock_status(nand_info_t *meminfo, loff_t offset);
>  int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst);
>  void nand_deselect(void);
>  
> -void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len);
> -void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len);
> -
>  #ifdef CONFIG_SYS_NAND_SELECT_DEVICE
>  void board_nand_select_device(struct nand_chip *nand, int chip);
>  #endif
> @@ -154,3 +151,10 @@ __attribute__((noreturn)) void nand_boot(void);
>  #define ENV_OFFSET_SIZE 8
>  int get_nand_env_oob(nand_info_t *nand, unsigned long *result);
>  #endif
> +
> +/* Standard NAND functions from nand_base.c */
> +void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len);
> +void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len);
> +void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len);
> +void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len);
> +uint8_t nand_read_byte(struct mtd_info *mtd);

Sorry for not noticing this before, but these should go in
include/linux/mtd/nand.h since that corresponds to
drivers/mtd/nand/nand_base.c.  include/nand.h is for U-Boot-specific things.

As it stands now, drivers/mtd/nand/nand_base.c does not include
include/nand.h, so we won't get warned if the function signatures diverge.

-Scott