From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Wed, 05 Oct 2011 13:51:22 +0200 Subject: [U-Boot] [Resend PATCH V3] mx31: provide readable WEIM CS accessor In-Reply-To: <1317311103-1020-1-git-send-email-helmut.raiger@hale.at> References: <4E847DA9.6060508@denx.de> <1317311103-1020-1-git-send-email-helmut.raiger@hale.at> Message-ID: <4E8C44BA.6040603@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 09/29/2011 05:45 PM, Helmut Raiger wrote: > setup_weimcs() and some macros are added to support the setup > for i.MX31 WEIM chip selects. As a compromise between verbosity > and readability an ASCII-art'ish bit comment is used instead of > bitfields. > All i.MX31 boards have been patched to use this approach using a > helper program to verify the changes. > > Signed-off-by: Helmut Raiger > --- > V2: > added sys_proto.h for mx31 > introduced mxc_setup_weimcs(), which is SOC independent > not inlined any more (codesize increased by 60-90 bytes) > V3: > modified register access according to the coding style > --- Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================