From: Igor Grinberg <grinberg@compulab.co.il>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 2/2] omap4_panda: Build in cmd_gpio support on panda
Date: Sun, 09 Oct 2011 12:47:47 +0200 [thread overview]
Message-ID: <4E917BD3.10203@compulab.co.il> (raw)
In-Reply-To: <1317937844-1747-2-git-send-email-joe.hershberger@ni.com>
Hi Joe,
On 10/06/11 23:50, Joe Hershberger wrote:
> Enable the gpio command
>
> Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
> Cc: Joe Hershberger <joe.hershberger@gmail.com>
> Cc: Sandeep Paulraj <s-paulraj@ti.com>
> ---
> Changes for v2:
> - Correct a bad merge... sorry.
>
> board/ti/panda/panda_mux_data.h | 2 +-
> include/configs/omap4_panda.h | 3 +++
> 2 files changed, 4 insertions(+), 1 deletions(-)
>
> diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
> index 63448b6..c692c7b 100644
> --- a/board/ti/panda/panda_mux_data.h
> +++ b/board/ti/panda/panda_mux_data.h
> @@ -212,7 +212,7 @@ const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
> {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
> {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
> {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
> - {PAD1_FREF_CLK3_REQ, M7}, /* safe mode */
> + {PAD1_FREF_CLK3_REQ, M7}, /* safe mode */
> {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
> {PAD1_FREF_CLK4_REQ, (PTU | M3)}, /* led status_1 */
> {PAD0_FREF_CLK4_OUT, (PTU | M3)}, /* led status_2 */
> diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
> index 67da70e..b88e5ad 100644
> --- a/include/configs/omap4_panda.h
> +++ b/include/configs/omap4_panda.h
> @@ -35,6 +35,9 @@
>
> #include <configs/omap4_common.h>
>
> +/* GPIO */
> +#define CONFIG_CMD_GPIO 1
Boolean defines should not have a value.
--
Regards,
Igor.
next prev parent reply other threads:[~2011-10-09 10:47 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-06 20:45 [U-Boot] [PATCH 1/2] omap: Don't use gpio_free to change direction to input Joe Hershberger
2011-10-06 20:45 ` [U-Boot] [PATCH 2/2] omap4_panda: Build in cmd_gpio support on panda Joe Hershberger
2011-10-06 21:50 ` [U-Boot] [PATCH v2 1/2] omap: Don't use gpio_free to change direction to input Joe Hershberger
2011-10-06 21:50 ` [U-Boot] [PATCH v2 2/2] omap4_panda: Build in cmd_gpio support on panda Joe Hershberger
2011-10-09 10:47 ` Igor Grinberg [this message]
2011-10-12 20:31 ` [U-Boot] [PATCH v3 1/2] omap: Don't use gpio_free to change direction to input Joe Hershberger
2011-10-12 20:31 ` [U-Boot] [PATCH v3 2/2] omap4_panda: Build in cmd_gpio support on panda Joe Hershberger
-- strict thread matches above, loose matches on Subject: below --
2011-08-10 5:17 [U-Boot] [PATCH 1/2] omap3+: Add OMAP support for cmd_gpio Joe Hershberger
2011-08-16 22:17 ` [U-Boot] [PATCH v2 2/2] omap4_panda: Build in cmd_gpio support on panda Joe Hershberger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E917BD3.10203@compulab.co.il \
--to=grinberg@compulab.co.il \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox