From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?B?QW5kcmVhcyBCaWXDn21hbm4=?= Date: Tue, 11 Oct 2011 16:05:44 +0200 Subject: [U-Boot] u-boot not working on Atmel ATNGW100 (AVR32) In-Reply-To: <4E944477.1040801@gmail.com> References: <4E943F3B.8060404@stackframe.org> <4E944334.9060704@gmail.com> <4E944477.1040801@gmail.com> Message-ID: <4E944D38.6020509@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Sven, Am 11.10.2011 15:28, schrieb Andreas Bie?mann: > Dear Sven, > > Am Di 11 Okt 2011 15:23:00 CEST schrieb Andreas Bie?mann: >> Dear Sven, >> >> Am 11.10.2011 15:06, schrieb Sven Schnelle: >> One thing, we had much truble with our toolchain. Which toolchain do you >> use? Could you provide me (off list) a u-boot.bin for atstk1002 or >> grasshopper? > i've just build a version for grasshopper: > Sven Built with my toolchain: ---8<--- U-Boot 2011.09-00253-gac77ce1 (Oct 11 2011 - 15:57:07) U-Boot code: 00000000 -> 000110ac data: 000177b0 -> 0001e7e0 VMR table @ 0x13ff9170 DMA: Using memory from 0x13f9d000 to 0x13fa1000 Flash: 8 MiB at address 0x00000000 DRAM Configuration: Bank #0: 10000000 64 MiB In: serial Out: serial Err: serial Net: macb0 Press SPACE to abort autoboot in 1000 seconds U-Boot> --->8--- Your u-boot.bin ---8<--- U-Boot 2011.09-00251-gf530e92 (Oct 11 2011 - 15:38:39) U-Boot code: 00000000 -> 00013a70 data: 0001b420 -> 0004fe40 VMR table @ 0x0001bd94 --->8--- As you can see, your u-boot.bin is not working here. I suspect some toolchain problem on your side. best regards Andreas Bie?mann