From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Thu, 13 Oct 2011 07:23:08 +0200 Subject: [U-Boot] [PATCH 0/4] Remove duplicate functions for power and sleep configuration In-Reply-To: <1318419080-14396-1-git-send-email-christian.riesch@omicron.at> References: <1318419080-14396-1-git-send-email-christian.riesch@omicron.at> Message-ID: <4E9675BC.4000504@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Christian, Christian Riesch wrote: > Hi, > these patches apply on top of Heiko Schocher's patches for the enbw_cmc > board. They remove the duplicate functions for the power and sleep > controller of the davinci devices. > > The first patch renames the low level configuration functions since they > can not only be used for the AM1808 but for the entire da850 family. > > The second patch corrects the mask for the state bitfield of the MDSTAT > registers. Similar patches have been already submitted for the Linux kernel > and other parts of u-boot, see e.g. http://patchwork.ozlabs.org/patch/114942/ > > Patch number three adds a function to set an LPSC module to Sync Reset > state as this is required for DDR memory controller initialization. > > The forth patch finally replaces the PSC related functions in > arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c by those of psc.c. > > I tested the DDR initialization functions on my board and they worked fine, > but of course I can only compile-test them for Heiko's board. > > I am looking forward to your comments! just tried your patches, but after applying it, my console on UART2 is not longer working properly on the enbw_cmc board, it seems, Tx only works ... investigating this behaviour ... bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany