From mboxrd@z Thu Jan  1 00:00:00 1970
From: Sven Schnelle <svens@stackframe.org>
Date: Thu, 13 Oct 2011 09:52:56 +0200
Subject: [U-Boot] [PATCH 1/2] AVR32: use generic mmc framework
In-Reply-To: <4E95AB6B.9030406@gmail.com>
References: <1318424949-24760-1-git-send-email-svens@stackframe.org>
	<1318424949-24760-2-git-send-email-svens@stackframe.org>
	<4E95A464.5070208@gmail.com> <4E95A965.20504@stackframe.org>
	<4E95AB6B.9030406@gmail.com>
Message-ID: <4E9698D8.3000702@stackframe.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 10/12/2011 04:59 PM, Andreas Bie?mann wrote:
> Am 12.10.2011 16:51, schrieb Sven Schnelle:
>> On 10/12/2011 04:29 PM, Andreas Bie?mann wrote:
>>> Am 12.10.2011 15:09, schrieb Sven Schnelle:
>>> And does not work on device:

>>> b) ext2ls is not reliable:
>>>
>>> ---8<---
>>> U-Boot>   ext2ls mmc 0:1
>>> <DIR>         1024 .
>>> <DIR>         1024 ..
>>> <DIR>        12288 lost+found
>>> gen_atmel_mci: CMDR 00051051 (17) ARGR 02008600 (SR: 00400025) Data
>>> Transfer Failed
>>>    ** ext2fs_devread read error - last part
>>> U-Boot>
>>> --->8---
>> Hmm, that's really bad. What type of card is this? MMC, SD or SDHC?
>
> It is SD card (the one delivered with my atstk1002, there is an Atmel
> label on it ;).
>
> When initialising mmc with old atmel_mci driver I get this:
>
> ---8<---
> U-Boot>  mmc init
> Manufacturer ID:       03
> OEM/Application ID:    5344
> Product name:          SD128
> Product Revision:      5.8
> Product Serial Number: 8227719
> Manufacturing Date:    06/03
> SD Card detected (RCA 58916)
> CSD data: 00260032 1f5983c0 fefa4fff 924040ab
> CSD structure version:   1.0
> MMC System Spec version: 0
> Card command classes:    1f5
> Read block length:       512
> Supports partial reads
> Write block length:      512
> Does not support partial writes
> Supports group WP:      32
> Card capacity:		125960192 bytes
> File format:            0/0
> Write protection:
> mmc: Using 131072 cycles data timeout (DTOR=0x62)
> .mmc1 is available
> --->8---
>
> best regards
>
> Andreas Bie?mann

I've just tried all SD cards i have here, which are in particular:

Noname 32GB SDHC: works
'PLATINUM' 4GB SDHC: works
Sandisk 2GB SD: works
Sandisk 2GB Micro SD: works

So this seems to be an issue with the specific card - it would be nice 
if you could enable CONFIG_MMC_TRACE, and send me the output.

Regards

Sven