From: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/5] altera_tse: Several small, but relevant fixes/feature
Date: Tue, 25 Oct 2011 10:21:45 +0200 [thread overview]
Message-ID: <4EA67199.2060704@missinglinkelectronics.com> (raw)
In-Reply-To: <1318865086-837-1-git-send-email-joachim.foerster@missinglinkelectronics.com>
Hi all,
Did anybody get a chance to review those 5 small patches? I would like
to get some feedback and work on it, if needed - to get them upstream.
On 10/17/2011 05:24 PM, Joachim Foerster wrote:
> This patch series comprises small, but relevant fixes, regarding the
> driver for Altera's TSE ip core. They are needed to make it run on a
> Terasic DE4 board.
> The new feature is the support for dedicated descriptor memory.
>
> Joachim Foerster (5):
> altera_tse: Clear SGDMA's RUN bit in async case, too.
> altera_tse: Fix SGDMA reset triggering.
> altera_tse: Add support for dedicated descriptor memory.
> altera_tse: m88e1111s: Honor device flags regarding PHY interface
> mode.
> altera_tse: Fix return of eth_device's recv() callback.
>
> board/altera/nios2-generic/nios2-generic.c | 10 +++++-
> drivers/net/altera_tse.c | 45 ++++++++++++++++++++++-----
> include/netdev.h | 3 +-
> 3 files changed, 47 insertions(+), 11 deletions(-)
--
Joachim Foerster
Missing Link Electronics
http://www.missinglinkelectronics.com
Office EU: +49 (731) 141-149-0
Office US: +1 (408) 457-0700
email: joachim.foerster at missinglinkelectronics.com
next prev parent reply other threads:[~2011-10-25 8:21 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-17 15:24 [U-Boot] [PATCH 0/5] altera_tse: Several small, but relevant fixes/feature Joachim Foerster
2011-10-17 15:24 ` [U-Boot] [PATCH 1/5] altera_tse: Clear SGDMA's RUN bit in async case, too Joachim Foerster
2011-10-17 15:24 ` [U-Boot] [PATCH 2/5] altera_tse: Fix SGDMA reset triggering Joachim Foerster
2011-10-17 15:24 ` [U-Boot] [PATCH 3/5] altera_tse: Add support for dedicated descriptor memory Joachim Foerster
2011-10-17 15:24 ` [U-Boot] [PATCH 4/5] altera_tse: m88e1111s: Honor device flags regarding PHY interface mode Joachim Foerster
2011-10-17 15:24 ` [U-Boot] [PATCH 5/5] altera_tse: Fix return of eth_device's recv() callback Joachim Foerster
2011-10-25 8:21 ` Joachim Foerster [this message]
2011-10-25 12:24 ` [U-Boot] [PATCH 0/5] altera_tse: Several small, but relevant fixes/feature Scott McNutt
2011-10-26 2:07 ` Thomas Chou
2011-10-26 8:39 ` Joachim Foerster
2011-10-26 8:39 ` [U-Boot] [PATCH 0/5 v2] " Joachim Foerster
2011-10-26 8:39 ` [U-Boot] [PATCH 1/5 v2] altera_tse: Clear SGDMA's RUN bit in async transfer, like in sync case Joachim Foerster
2011-10-26 19:26 ` Wolfgang Denk
2011-10-26 8:39 ` [U-Boot] [PATCH 2/5 v2] altera_tse: Fix SGDMA reset triggering Joachim Foerster
2011-10-26 19:27 ` Wolfgang Denk
2011-10-26 8:39 ` [U-Boot] [PATCH 3/5 v2] altera_tse: Add support for dedicated descriptor memory Joachim Foerster
2011-10-26 19:28 ` Wolfgang Denk
2011-10-26 8:39 ` [U-Boot] [PATCH 4/5 v2] altera_tse: m88e1111s: Honor device flags regarding PHY interface mode Joachim Foerster
2011-10-26 19:28 ` Wolfgang Denk
2011-10-26 8:39 ` [U-Boot] [PATCH 5/5 v2] altera_tse: Fix return of eth_device's recv() callback Joachim Foerster
2011-10-26 19:29 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EA67199.2060704@missinglinkelectronics.com \
--to=joachim.foerster@missinglinkelectronics.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox