From mboxrd@z Thu Jan  1 00:00:00 1970
From: Helmut Raiger <helmut.raiger@hale.at>
Date: Thu, 27 Oct 2011 18:16:22 +0200
Subject: [U-Boot] [PATCH] tt01: add MMC and video support
In-Reply-To: <1319731903-17127-1-git-send-email-helmut.raiger@hale.at>
References: <1319731903-17127-1-git-send-email-helmut.raiger@hale.at>
Message-ID: <4EA983D6.2000002@hale.at>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 10/27/2011 06:11 PM, Helmut Raiger wrote:
> board_mmc_init() initializes the pins of SDHC1 and
> turns on V_MMC1 of the PMIC. The video setup for
> the Epson display is provided along with some fancy
> extra info to be displayed next to the HALE logo.
>
> Signed-off-by: Helmut Raiger<helmut.raiger@hale.at>
> ---
>   V1: Note this requires http://patchwork.ozlabs.org/patch/122114/
>
>   board/hale/tt01/tt01.c |   53 ++++++++++++++++++++++++++++++++++++++++++++++-
>   include/configs/tt01.h |   41 ++++++++++++++++++++++++++++++++++++-
>   tools/Makefile         |    3 ++
>   tools/logos/hale.bmp   |  Bin 0 ->  27238 bytes
>   4 files changed, 94 insertions(+), 3 deletions(-)
>   create mode 100644 tools/logos/hale.bmp
>
Oops that was a bit early, the mmc patch 
http://patchwork.ozlabs.org/patch/122139/ is still under review.
Helmut (pushing too hard)


--
Scanned by MailScanner.