[U-Boot] [PATCH] tx25: re-add MACH_TYPE_TX25

[Stefano Babic <sbabic@denx.de>]

On 10/30/2011 02:18 PM, Wolfgang Denk wrote:
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> cc: Stefano Babic <sbabic@denx.de>
> ---
>  include/configs/tx25.h |    4 ++++
>  1 files changed, 4 insertions(+), 0 deletions(-)
> 
> diff --git a/include/configs/tx25.h b/include/configs/tx25.h
> index 8cb57ff..39d551e 100644
> --- a/include/configs/tx25.h
> +++ b/include/configs/tx25.h
> @@ -29,6 +29,10 @@
>  #define CONFIG_MX25_CLK32		32000	/* OSC32K frequency */
>  #define CONFIG_SYS_HZ			1000
>  
> +#ifndef MACH_TYPE_TX25
> +#define MACH_TYPE_TX25			2177
> +#endif
> +
>  #define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* 256 kB for U-Boot */
>  

Thanks for reporting, but....

..I have already sent a fix for this last week, using also the standard
mechanism in arch/arm/lib/board.c to set the mach-id:

http://patchwork.ozlabs.org/patch/122357/

As a fix, I have already applied it and I inserted it in my pull-request
ro Albert. The patch is already in u-boot-arm and as far as I have
tested, there should be no broken IMX boards due to missing mach type.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================