From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Sun, 30 Oct 2011 21:17:22 +0100 Subject: [U-Boot] [PATCH] tx25: re-add MACH_TYPE_TX25 In-Reply-To: <1319980721-6615-1-git-send-email-wd@denx.de> References: <1319980721-6615-1-git-send-email-wd@denx.de> Message-ID: <4EADB0D2.8010000@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 10/30/2011 02:18 PM, Wolfgang Denk wrote: > Signed-off-by: Wolfgang Denk > cc: Stefano Babic > --- > include/configs/tx25.h | 4 ++++ > 1 files changed, 4 insertions(+), 0 deletions(-) > > diff --git a/include/configs/tx25.h b/include/configs/tx25.h > index 8cb57ff..39d551e 100644 > --- a/include/configs/tx25.h > +++ b/include/configs/tx25.h > @@ -29,6 +29,10 @@ > #define CONFIG_MX25_CLK32 32000 /* OSC32K frequency */ > #define CONFIG_SYS_HZ 1000 > > +#ifndef MACH_TYPE_TX25 > +#define MACH_TYPE_TX25 2177 > +#endif > + > #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for U-Boot */ > Thanks for reporting, but.... ..I have already sent a fix for this last week, using also the standard mechanism in arch/arm/lib/board.c to set the mach-id: http://patchwork.ozlabs.org/patch/122357/ As a fix, I have already applied it and I inserted it in my pull-request ro Albert. The patch is already in u-boot-arm and as far as I have tested, there should be no broken IMX boards due to missing mach type. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================