From mboxrd@z Thu Jan  1 00:00:00 1970
From: Igor Grinberg <grinberg@compulab.co.il>
Date: Mon, 31 Oct 2011 11:12:39 +0200
Subject: [U-Boot] [PATCH 13/17 V4] iMX28: Add support for DENX M28EVK
 board
In-Reply-To: <1319237066-14954-14-git-send-email-marek.vasut@gmail.com>
References: <1315800409-19876-1-git-send-email-marek.vasut@gmail.com>	<1319237066-14954-1-git-send-email-marek.vasut@gmail.com>
	<1319237066-14954-14-git-send-email-marek.vasut@gmail.com>
Message-ID: <4EAE6687.30302@compulab.co.il>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Marek,

On 10/22/11 00:44, Marek Vasut wrote:
> This contains support for the following components:
> - DUART
> - MMC
> - Both FEC interfaces
> - NAND
> - I2C (RTC, EEPROM)
> - SPI (FLASH)
> 
> Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Detlev Zundel <dzu@denx.de>
> ---
>  MAINTAINERS                |    1 +
>  board/denx/m28evk/Makefile |   49 ++++++++
>  board/denx/m28evk/m28evk.c |  195 ++++++++++++++++++++++++++++++
>  boards.cfg                 |    1 +
>  include/configs/m28evk.h   |  282 ++++++++++++++++++++++++++++++++++++++++++++
>  5 files changed, 528 insertions(+), 0 deletions(-)
>  create mode 100644 board/denx/m28evk/Makefile
>  create mode 100644 board/denx/m28evk/m28evk.c
>  create mode 100644 include/configs/m28evk.h
> 
> V2: Use scrub -y instead of scrub.quiet in the scripts.
> V3: Use CONFIG_ENV_RANGE
> V4: Configure the RAM size to 128MB for V1.1 module

[...]

> diff --git a/board/denx/m28evk/Makefile b/board/denx/m28evk/Makefile
> new file mode 100644
> index 0000000..4037199
> --- /dev/null
> +++ b/board/denx/m28evk/Makefile

[...]

> +
> +clean:
> +	rm -f $(OBJS)
> +
> +distclean:	clean
> +	rm -f $(LIB) core *.bak .depend

These, should not be here anymore, right?

[...]


-- 
Regards,
Igor.