From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ARM: define CONFIG_MACH_TYPE for all ronetix boards
Date: Tue, 08 Nov 2011 09:55:43 +0100 [thread overview]
Message-ID: <4EB8EE8F.9020004@aribaud.net> (raw)
In-Reply-To: <1320087260-6152-1-git-send-email-dimov@ronetix.at>
Hi Asen,
Le 31/10/2011 19:54, Asen Chavdarov Dimov a ?crit :
>
> Signed-off-by: Asen Chavdarov Dimov<dimov@ronetix.at>
> ---
> board/ronetix/pm9261/pm9261.c | 3 ---
> board/ronetix/pm9263/pm9263.c | 3 ---
> board/ronetix/pm9g45/pm9g45.c | 2 --
> include/configs/pm9261.h | 3 +++
> include/configs/pm9263.h | 3 +++
> include/configs/pm9g45.h | 3 +++
> 6 files changed, 9 insertions(+), 8 deletions(-)
>
> diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
> index 871b94a..b26e33a 100644
> --- a/board/ronetix/pm9261/pm9261.c
> +++ b/board/ronetix/pm9261/pm9261.c
> @@ -248,9 +248,6 @@ int board_init(void)
> 1<< ATMEL_ID_PIOC,
> &pmc->pcer);
>
> - /* arch number of PM9261-Board */
> - gd->bd->bi_arch_number = MACH_TYPE_PM9261;
> -
> /* adress of boot parameters */
> gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
>
> diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
> index cfc9847..b0f7ea6 100644
> --- a/board/ronetix/pm9263/pm9263.c
> +++ b/board/ronetix/pm9263/pm9263.c
> @@ -349,9 +349,6 @@ int board_init(void)
> (1<< ATMEL_ID_PIOB),
> &pmc->pcer);
>
> - /* arch number of AT91SAM9263EK-Board */
> - gd->bd->bi_arch_number = MACH_TYPE_PM9263;
> -
> /* adress of boot parameters */
> gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
>
> diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
> index f3374a4..961d193 100644
> --- a/board/ronetix/pm9g45/pm9g45.c
> +++ b/board/ronetix/pm9g45/pm9g45.c
> @@ -139,8 +139,6 @@ int board_init(void)
> (1<< ATMEL_ID_PIOC) |
> (1<< ATMEL_ID_PIODE),&pmc->pcer);
>
> - /* arch number of AT91SAM9M10G45EK-Board */
> - gd->bd->bi_arch_number = MACH_TYPE_PM9G45;
> /* adress of boot parameters */
> gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
>
> diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
> index 89e17b8..55455e7 100644
> --- a/include/configs/pm9261.h
> +++ b/include/configs/pm9261.h
> @@ -52,6 +52,9 @@
> #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
> #define CONFIG_SYS_TEXT_BASE 0
>
> +#define MACH_TYPE_PM9261 1187
> +#define CONFIG_MACH_TYPE MACH_TYPE_PM9261
> +
> /* clocks */
> /* CKGR_MOR - enable main osc. */
> #define CONFIG_SYS_MOR_VAL \
> diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
> index 1f7543c..43104a3 100644
> --- a/include/configs/pm9263.h
> +++ b/include/configs/pm9263.h
> @@ -52,6 +52,9 @@
> #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
> #define CONFIG_SYS_TEXT_BASE 0
>
> +#define MACH_TYPE_PM9263 1475
> +#define CONFIG_MACH_TYPE MACH_TYPE_PM9263
> +
> /* clocks */
> #define CONFIG_SYS_MOR_VAL \
> (AT91_PMC_MOR_MOSCEN | \
> diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
> index acc1204..d3beaf3 100644
> --- a/include/configs/pm9g45.h
> +++ b/include/configs/pm9g45.h
> @@ -41,6 +41,9 @@
> #define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */
> #define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G45"
>
> +#define MACH_TYPE_PM9G45 2672
> +#define CONFIG_MACH_TYPE MACH_TYPE_PM9G45
> +
> /* ARM asynchronous clock */
> #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
> #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
prev parent reply other threads:[~2011-11-08 8:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-31 18:54 [U-Boot] [PATCH] ARM: define CONFIG_MACH_TYPE for all ronetix boards Asen Chavdarov Dimov
2011-11-01 11:43 ` Igor Grinberg
2011-11-08 8:55 ` Albert ARIBAUD [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EB8EE8F.9020004@aribaud.net \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox