From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Weber Date: Wed, 09 Nov 2011 09:43:07 +0100 Subject: [U-Boot] [PATCH] devkit8000: Fix NAND SPL on boards with 256MB NAND In-Reply-To: <4EB996C1.8020008@gmail.com> References: <1319652551-31573-1-git-send-email-trini@ti.com> <4EB996C1.8020008@gmail.com> Message-ID: <4EBA3D1B.8050102@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Tom, Am 08.11.2011 21:53, schrieb Thomas Weber: > Am 26.10.2011 20:09, schrieb Tom Rini: >> The devkit8000 ships with either a 128MB or 256MB NAND chip. In >> order for SPL to work with 256MB NAND CONFIG_SYS_NAND_5_ADDR_CYCLE >> needs to be set. After talking with Scott Wood this should be >> safe to set even for smaller NAND chips. >> >> Cc: Scott Wood >> Cc: Frederik Kriewitz >> Cc: Albert ARIBAUD >> Signed-off-by: Tom Rini >> --- >> include/configs/devkit8000.h | 1 + >> 1 files changed, 1 insertions(+), 0 deletions(-) >> >> diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h >> index ba0d23e..1856aa9 100644 >> --- a/include/configs/devkit8000.h >> +++ b/include/configs/devkit8000.h >> @@ -332,6 +332,7 @@ >> #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 >> >> /* NAND boot config */ >> +#define CONFIG_SYS_NAND_5_ADDR_CYCLE >> #define CONFIG_SYS_NAND_PAGE_COUNT 64 >> #define CONFIG_SYS_NAND_PAGE_SIZE 2048 >> #define CONFIG_SYS_NAND_OOBSIZE 64 > > Tested-by: Thomas Weber > > on Devkit8000 with 256 MB NAND. > > Tomorrow I will test it with a 128 MB NAND devkit8000. > > Thomas Also on Devkit8000 with 128 MB NAND successful tested. Thomas