[U-Boot] [PATCH 1/2] image: Implement IH_TYPE_KERNEL_ANYLOAD

[Stephen Warren <swarren@nvidia.com>]

On 11/10/2011 02:58 AM, Marek Vasut wrote:
>> The legacy uImage format includes an absolute load and entry-point
>> address. When bootm operates on a kernel uImage in memory that isn't
>> loaded at the address in the image's load address, U-Boot will copy
>> the image to its address in the header.
>>
>> Some kernel images can actually be loaded and used at any arbitrary
>> address. An example is an ARM Linux kernel zImage file. To represent
>> this capability, IH_TYPE_KERNEL_ANYLOAD is implemented, which operates
>> just like IH_TYPE_KERNEL, except that the load address header is
>> ignored, and U-Boot does not copy the image to its load address, but
>> rather uses it in-place.
>>
>> This is useful when sharing a single (uImage-wrapped) zImage across
>> multiple boards with different memory layouts; in this case, a specific
>> load address need not be picked when creating the uImage, but instead
>> is selected by the board-specific U-Boot environment used to load and
>> boot that image.
>>
>> Signed-off-by: Stephen Warren <swarren@nvidia.com>
>> ---
> 
> Hi Stephen,
> 
> just a silly question, but didn't we agree on cmd_bootz? Or is this unrelated ?

bootz did seem to be agreed upon initially, but Wolfgang's most recent
response suggested that a new IH_TYPE would be acceptable, and it's a
lot less code to implement. At a later point, bootz could still be
implemented if desired.

-- 
nvpublic