From: Dirk Behme <dirk.behme@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/6] i.mx: add the initial i.mx6q core/board support
Date: Sat, 12 Nov 2011 17:10:29 +0100 [thread overview]
Message-ID: <4EBE9A75.7010709@googlemail.com> (raw)
In-Reply-To: <1321094190-8108-1-git-send-email-jason.hui@linaro.org>
On 12.11.2011 11:36, Jason Liu wrote:
> This patch-set add the initial support for freescale i.mx6q support.
> freescale i.mx6q is a quad core built on arm cortex_a9 complex.
>
> The patch-set has been tested ok on freescale i.mx6q Armadillo2 board and also
> make sure it does not break i.mx5 support
>
> Jason Liu (6):
> i.mx: i.mx5: Move some files to imx-common folder
> i.mx: Add the initial support for freescale i.MX6Q processor
Hmm, this patch, i.e. patch 2/6, is missing at the mailing list?
Dirk
> i.mx: mxc_gpio: add the i.mx6q support
> i.mx: serial_mxc: add the i.mx6q support
> i.mx: fsl_esdhc: add the i.mx6q support
> i.mx: i.mx6q: Add the initial support for i.mx6q ARM2 board
>
> MAINTAINERS | 1 +
> Makefile | 7 +
> arch/arm/cpu/armv7/imx-common/Makefile | 47 +
> arch/arm/cpu/armv7/imx-common/cpu_info.c | 108 ++
> arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c | 0
> arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c | 17 +-
> arch/arm/cpu/armv7/mx5/Makefile | 2 +-
> arch/arm/cpu/armv7/mx5/soc.c | 77 -
> arch/arm/cpu/armv7/mx6/Makefile | 48 +
> arch/arm/cpu/armv7/mx6/clock.c | 388 +++++
> arch/arm/cpu/armv7/mx6/iomux-v3.c | 76 +
> arch/arm/cpu/armv7/mx6/lowlevel_init.S | 60 +
> arch/arm/cpu/armv7/{mx5/speed.c => mx6/soc.c} | 40 +-
> arch/arm/include/asm/arch-mx6/ccm_regs.h | 894 +++++++++++
> .../mx5/speed.c => include/asm/arch-mx6/clock.h} | 45 +-
> .../mx5/speed.c => include/asm/arch-mx6/gpio.h} | 28 +-
> arch/arm/include/asm/arch-mx6/imx-regs.h | 233 +++
> arch/arm/include/asm/arch-mx6/iomux-v3.h | 104 ++
> arch/arm/include/asm/arch-mx6/mx6x_pins.h | 1683 ++++++++++++++++++++
> .../speed.c => include/asm/arch-mx6/sys_proto.h} | 31 +-
> board/freescale/mx6qarm2/Makefile | 48 +
> board/freescale/mx6qarm2/imximage.cfg | 167 ++
> board/freescale/mx6qarm2/mx6qarm2.c | 163 ++
> boards.cfg | 1 +
> drivers/gpio/mxc_gpio.c | 4 +-
> drivers/mmc/fsl_esdhc.c | 14 +-
> drivers/serial/serial_mxc.c | 10 +-
> include/configs/mx6qarm2.h | 163 ++
> 28 files changed, 4303 insertions(+), 156 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/imx-common/Makefile
> create mode 100644 arch/arm/cpu/armv7/imx-common/cpu_info.c
> copy arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c (100%)
> rename arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c (84%)
> mode change 100644 => 100755
> create mode 100644 arch/arm/cpu/armv7/mx6/Makefile
> create mode 100644 arch/arm/cpu/armv7/mx6/clock.c
> create mode 100644 arch/arm/cpu/armv7/mx6/iomux-v3.c
> create mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
> copy arch/arm/cpu/armv7/{mx5/speed.c => mx6/soc.c} (57%)
> create mode 100644 arch/arm/include/asm/arch-mx6/ccm_regs.h
> copy arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/clock.h} (59%)
> copy arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/gpio.h} (65%)
> create mode 100644 arch/arm/include/asm/arch-mx6/imx-regs.h
> create mode 100644 arch/arm/include/asm/arch-mx6/iomux-v3.h
> create mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
> rename arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/sys_proto.h} (65%)
> create mode 100644 board/freescale/mx6qarm2/Makefile
> create mode 100644 board/freescale/mx6qarm2/imximage.cfg
> create mode 100644 board/freescale/mx6qarm2/mx6qarm2.c
> create mode 100644 include/configs/mx6qarm2.h
>
next prev parent reply other threads:[~2011-11-12 16:10 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-12 10:36 [U-Boot] [PATCH 0/6] i.mx: add the initial i.mx6q core/board support Jason Liu
2011-11-12 10:36 ` [U-Boot] [PATCH 1/6] i.mx: i.mx5: Move some files to imx-common folder Jason Liu
2011-11-14 8:34 ` Stefano Babic
2011-11-14 8:57 ` Jason Hui
2011-11-14 11:28 ` Stefano Babic
2011-11-12 10:36 ` [U-Boot] [PATCH 2/6] i.mx: Add the initial support for freescale i.MX6Q processor Jason Liu
2011-11-13 23:11 ` Marek Vasut
2011-11-14 8:47 ` Jason Hui
2011-11-14 10:45 ` Marek Vasut
2011-11-15 10:10 ` Jason Hui
2011-11-15 11:08 ` Stefano Babic
2011-11-14 9:03 ` Stefano Babic
2011-11-14 9:42 ` Jason Hui
2011-11-14 11:49 ` Stefano Babic
2011-11-15 10:18 ` Jason Hui
2011-11-12 10:36 ` [U-Boot] [PATCH 3/6] i.mx: mxc_gpio: add the i.mx6q support Jason Liu
2011-11-14 9:04 ` Stefano Babic
2011-11-12 10:36 ` [U-Boot] [PATCH 4/6] i.mx: serial_mxc: " Jason Liu
2011-11-12 10:36 ` [U-Boot] [PATCH 5/6] i.mx: fsl_esdhc: " Jason Liu
2011-11-12 16:35 ` Marek Vasut
2011-11-14 8:37 ` Jason Hui
2011-11-14 10:42 ` Marek Vasut
2011-11-15 9:46 ` Jason Hui
2011-11-15 11:56 ` Stefano Babic
2011-11-16 1:36 ` Jason Hui
2011-11-16 2:24 ` Marek Vasut
2011-11-14 9:06 ` Stefano Babic
2011-11-12 10:36 ` [U-Boot] [PATCH 6/6] i.mx: i.mx6q: Add the initial support for i.mx6q ARM2 board Jason Liu
2011-11-12 19:42 ` Fabio Estevam
2011-11-14 8:59 ` Jason Hui
2011-11-12 20:13 ` Fabio Estevam
2011-11-14 9:10 ` Jason Hui
2011-11-13 7:04 ` Igor Grinberg
2011-11-14 9:13 ` Jason Hui
2011-11-14 9:25 ` Stefano Babic
2011-11-14 9:55 ` Jason Hui
2011-11-14 11:36 ` Stefano Babic
2011-11-16 11:34 ` Dirk Behme
2011-11-16 12:15 ` Jason Hui
2011-11-12 16:10 ` Dirk Behme [this message]
2011-11-14 8:11 ` [U-Boot] [PATCH 0/6] i.mx: add the initial i.mx6q core/board support Jason Hui
2011-11-16 11:56 ` Dirk Behme
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EBE9A75.7010709@googlemail.com \
--to=dirk.behme@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox