From mboxrd@z Thu Jan 1 00:00:00 1970 From: Manojkumar Date: Mon, 14 Nov 2011 18:47:57 +0530 Subject: [U-Boot] [PATCH 20/20] M28EVK: Enable USB HOST support In-Reply-To: <201111141148.16115.marek.vasut@gmail.com> References: <20111112053752.97565ggsw3sbifm8@mail.fossilshale.com> <201111121706.31311.marek.vasut@gmail.com> <4EC0CA4E.1080003@fossilshale.com> <201111141148.16115.marek.vasut@gmail.com> Message-ID: <4EC11505.1010403@fossilshale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Marek Vasut wrote: >> Marek Vasut wrote: >> >>>> Hi Marek, >>>> >>>> u-boot-v2011.09 doesn't support for imx28. I need complete support patch >>>> for mx28. where can i get those patches? >>>> >>>> for which version of u-boot this patches supports..? >>>> >>>> >>>> Regards, >>>> Manoj >>>> >>> http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary >>> >>> M >>> >> Thanks Marek, >> Patches applied.. >> on usb start command i'm getting "scanning bus for devices... New Device >> 0" then its freezes after getting the debug message >> "enabling power on all ports >> usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 >> length 0x0" >> can u help me on this further? >> >> Regards, >> Manoj >> > > There is a mail with subject "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on > xscale" in uboot ML ... apply the patch and retry. What GCC do you use? > > M > > Hello Marek, I'm using u-boot version : u-boot-imx gcc version:4.3.3 When i try to add this Patch "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c on xscale" I'm getting: patching file usb.c Hunk #1 FAILED at 263. Hunk #2 FAILED at 313. 2 out of 2 hunks FAILED -- saving rejects to file usb.c.rej then i made some changes for common/usb.c as per the patch,even it gets freezes after printing the debug msg. "enabling power on all ports usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length 0x0" Regards, Manoj