From: Vladimir Zapolskiy <vz@mleia.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/3] devkit3250: add Timll DevKit3250 board initial support
Date: Tue, 15 Nov 2011 23:34:01 +0200 [thread overview]
Message-ID: <4EC2DAC9.4050100@mleia.com> (raw)
In-Reply-To: <1321292596-4631-1-git-send-email-vz@mleia.com>
Hello Albert,
I kindly ask you to pick up these changes based on u-boot-arm/next.
Thank you very much in advance.
On 14.11.2011 19:43, Vladimir Zapolskiy wrote:
> This patchset adds generic NXP LPC32XX SoC support and basic support
> for Embest/Timll DevKit3250 board, which powered by this SoC.
>
> The patchset is done on top of u-boot-arm/next branch.
>
> Vladimir Zapolskiy (3):
> arm926ejs: add NXP LPC32x0 cpu series support
> devkit3250: add Timll DevKit3250 board initial support
> devkit3250: add DevKit3250 board maintainer
>
> MAINTAINERS | 4 +
> arch/arm/cpu/arm926ejs/lpc32xx/Makefile | 45 +++++++
> arch/arm/cpu/arm926ejs/lpc32xx/clkpwr.c | 118 ++++++++++++++++++
> arch/arm/cpu/arm926ejs/lpc32xx/cpu.c | 58 +++++++++
> arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 47 +++++++
> arch/arm/cpu/arm926ejs/lpc32xx/timer.c | 94 ++++++++++++++
> arch/arm/include/asm/arch-lpc32xx/clk.h | 163 +++++++++++++++++++++++++
> arch/arm/include/asm/arch-lpc32xx/config.h | 59 +++++++++
> arch/arm/include/asm/arch-lpc32xx/cpu.h | 64 ++++++++++
> arch/arm/include/asm/arch-lpc32xx/emc.h | 92 ++++++++++++++
> arch/arm/include/asm/arch-lpc32xx/sys_proto.h | 25 ++++
> arch/arm/include/asm/arch-lpc32xx/timer.h | 74 +++++++++++
> arch/arm/include/asm/arch-lpc32xx/uart.h | 54 ++++++++
> arch/arm/include/asm/arch-lpc32xx/wdt.h | 51 ++++++++
> board/timll/devkit3250/Makefile | 44 +++++++
> board/timll/devkit3250/devkit3250.c | 71 +++++++++++
> boards.cfg | 3 +-
> include/configs/devkit3250.h | 121 ++++++++++++++++++
> 18 files changed, 1186 insertions(+), 1 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/Makefile
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/clkpwr.c
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/devices.c
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/timer.c
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/clk.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/config.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/cpu.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/emc.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/sys_proto.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/timer.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/uart.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/wdt.h
> create mode 100644 board/timll/devkit3250/Makefile
> create mode 100644 board/timll/devkit3250/devkit3250.c
> create mode 100644 include/configs/devkit3250.h
>
--
With best wishes,
Vladimir
next prev parent reply other threads:[~2011-11-15 21:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-14 17:43 [U-Boot] [PATCH 0/3] devkit3250: add Timll DevKit3250 board initial support Vladimir Zapolskiy
2011-11-14 17:43 ` [U-Boot] [PATCH 1/3 v5] arm926ejs: add NXP LPC32x0 cpu series support Vladimir Zapolskiy
2011-11-14 17:43 ` [U-Boot] [PATCH 2/3 v2] devkit3250: add Timll DevKit3250 board initial support Vladimir Zapolskiy
2011-11-15 6:42 ` Igor Grinberg
2011-11-15 7:25 ` Vladimir Zapolskiy
2011-11-15 7:48 ` Igor Grinberg
2011-11-15 18:17 ` Vladimir Zapolskiy
2011-11-14 17:43 ` [U-Boot] [PATCH 3/3] devkit3250: add DevKit3250 board maintainer Vladimir Zapolskiy
2011-11-15 21:34 ` Vladimir Zapolskiy [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-01-11 20:33 [U-Boot] [PATCH 0/3] devkit3250: add Timll DevKit3250 board initial support Vladimir Zapolskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EC2DAC9.4050100@mleia.com \
--to=vz@mleia.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox