public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Dirk Behme <dirk.behme@de.bosch.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/6] i.mx: add the initial i.mx6q core/board support
Date: Wed, 16 Nov 2011 12:56:36 +0100	[thread overview]
Message-ID: <4EC3A4F4.8080701@de.bosch.com> (raw)
In-Reply-To: <1321094190-8108-1-git-send-email-jason.hui@linaro.org>

On 12.11.2011 11:36, Jason Liu wrote:
> This patch-set add the initial support for freescale i.mx6q support.
> freescale i.mx6q is a quad core built on arm cortex_a9 complex.

With the mx6qarm2 config changes proposed some minutes ago:

Tested-by: Dirk Behme <dirk.behme@de.bosch.com>

Thanks

Dirk

> The patch-set has been tested ok on freescale i.mx6q Armadillo2 board and also
> make sure it does not break i.mx5 support
> 
> Jason Liu (6):
>   i.mx: i.mx5: Move some files to imx-common folder
>   i.mx: Add the initial support for freescale i.MX6Q processor
>   i.mx: mxc_gpio: add the i.mx6q support
>   i.mx: serial_mxc: add the i.mx6q support
>   i.mx: fsl_esdhc: add the i.mx6q support
>   i.mx: i.mx6q: Add the initial support for i.mx6q ARM2 board
> 
>  MAINTAINERS                                        |    1 +
>  Makefile                                           |    7 +
>  arch/arm/cpu/armv7/imx-common/Makefile             |   47 +
>  arch/arm/cpu/armv7/imx-common/cpu_info.c           |  108 ++
>  arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c     |    0
>  arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c     |   17 +-
>  arch/arm/cpu/armv7/mx5/Makefile                    |    2 +-
>  arch/arm/cpu/armv7/mx5/soc.c                       |   77 -
>  arch/arm/cpu/armv7/mx6/Makefile                    |   48 +
>  arch/arm/cpu/armv7/mx6/clock.c                     |  388 +++++
>  arch/arm/cpu/armv7/mx6/iomux-v3.c                  |   76 +
>  arch/arm/cpu/armv7/mx6/lowlevel_init.S             |   60 +
>  arch/arm/cpu/armv7/{mx5/speed.c => mx6/soc.c}      |   40 +-
>  arch/arm/include/asm/arch-mx6/ccm_regs.h           |  894 +++++++++++
>  .../mx5/speed.c => include/asm/arch-mx6/clock.h}   |   45 +-
>  .../mx5/speed.c => include/asm/arch-mx6/gpio.h}    |   28 +-
>  arch/arm/include/asm/arch-mx6/imx-regs.h           |  233 +++
>  arch/arm/include/asm/arch-mx6/iomux-v3.h           |  104 ++
>  arch/arm/include/asm/arch-mx6/mx6x_pins.h          | 1683 ++++++++++++++++++++
>  .../speed.c => include/asm/arch-mx6/sys_proto.h}   |   31 +-
>  board/freescale/mx6qarm2/Makefile                  |   48 +
>  board/freescale/mx6qarm2/imximage.cfg              |  167 ++
>  board/freescale/mx6qarm2/mx6qarm2.c                |  163 ++
>  boards.cfg                                         |    1 +
>  drivers/gpio/mxc_gpio.c                            |    4 +-
>  drivers/mmc/fsl_esdhc.c                            |   14 +-
>  drivers/serial/serial_mxc.c                        |   10 +-
>  include/configs/mx6qarm2.h                         |  163 ++
>  28 files changed, 4303 insertions(+), 156 deletions(-)
>  create mode 100644 arch/arm/cpu/armv7/imx-common/Makefile
>  create mode 100644 arch/arm/cpu/armv7/imx-common/cpu_info.c
>  copy arch/arm/cpu/armv7/{mx5 => imx-common}/speed.c (100%)
>  rename arch/arm/cpu/armv7/{mx5 => imx-common}/timer.c (84%)
>  mode change 100644 => 100755
>  create mode 100644 arch/arm/cpu/armv7/mx6/Makefile
>  create mode 100644 arch/arm/cpu/armv7/mx6/clock.c
>  create mode 100644 arch/arm/cpu/armv7/mx6/iomux-v3.c
>  create mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
>  copy arch/arm/cpu/armv7/{mx5/speed.c => mx6/soc.c} (57%)
>  create mode 100644 arch/arm/include/asm/arch-mx6/ccm_regs.h
>  copy arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/clock.h} (59%)
>  copy arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/gpio.h} (65%)
>  create mode 100644 arch/arm/include/asm/arch-mx6/imx-regs.h
>  create mode 100644 arch/arm/include/asm/arch-mx6/iomux-v3.h
>  create mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
>  rename arch/arm/{cpu/armv7/mx5/speed.c => include/asm/arch-mx6/sys_proto.h} (65%)
>  create mode 100644 board/freescale/mx6qarm2/Makefile
>  create mode 100644 board/freescale/mx6qarm2/imximage.cfg
>  create mode 100644 board/freescale/mx6qarm2/mx6qarm2.c
>  create mode 100644 include/configs/mx6qarm2.h
> 


-- 
======================================================================
Dirk Behme                      Robert Bosch Car Multimedia GmbH
                                 CM-AI/PJ-CF32
Phone: +49 5121 49-3274         Dirk Behme
Fax:   +49 711 811 5053274      PO Box 77 77 77
mailto:dirk.behme at de.bosch.com  D-31132 Hildesheim - Germany

Bosch Group, Car Multimedia (CM)
              Automotive Navigation and Infotainment Systems (AI)
              ProJect - CoreFunctions (PJ-CF)

Robert Bosch Car Multimedia GmbH - Ein Unternehmen der Bosch Gruppe
Sitz: Hildesheim
Registergericht: Amtsgericht Hildesheim HRB 201334
Aufsichtsratsvorsitzender: Volkmar Denner
Gesch?ftsf?hrung: Uwe Thomas, Michael Bolle, Robby Drave, Egbert Hellwig
======================================================================

      parent reply	other threads:[~2011-11-16 11:56 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-12 10:36 [U-Boot] [PATCH 0/6] i.mx: add the initial i.mx6q core/board support Jason Liu
2011-11-12 10:36 ` [U-Boot] [PATCH 1/6] i.mx: i.mx5: Move some files to imx-common folder Jason Liu
2011-11-14  8:34   ` Stefano Babic
2011-11-14  8:57     ` Jason Hui
2011-11-14 11:28       ` Stefano Babic
2011-11-12 10:36 ` [U-Boot] [PATCH 2/6] i.mx: Add the initial support for freescale i.MX6Q processor Jason Liu
2011-11-13 23:11   ` Marek Vasut
2011-11-14  8:47     ` Jason Hui
2011-11-14 10:45       ` Marek Vasut
2011-11-15 10:10         ` Jason Hui
2011-11-15 11:08           ` Stefano Babic
2011-11-14  9:03   ` Stefano Babic
2011-11-14  9:42     ` Jason Hui
2011-11-14 11:49       ` Stefano Babic
2011-11-15 10:18         ` Jason Hui
2011-11-12 10:36 ` [U-Boot] [PATCH 3/6] i.mx: mxc_gpio: add the i.mx6q support Jason Liu
2011-11-14  9:04   ` Stefano Babic
2011-11-12 10:36 ` [U-Boot] [PATCH 4/6] i.mx: serial_mxc: " Jason Liu
2011-11-12 10:36 ` [U-Boot] [PATCH 5/6] i.mx: fsl_esdhc: " Jason Liu
2011-11-12 16:35   ` Marek Vasut
2011-11-14  8:37     ` Jason Hui
2011-11-14 10:42       ` Marek Vasut
2011-11-15  9:46         ` Jason Hui
2011-11-15 11:56           ` Stefano Babic
2011-11-16  1:36             ` Jason Hui
2011-11-16  2:24               ` Marek Vasut
2011-11-14  9:06   ` Stefano Babic
2011-11-12 10:36 ` [U-Boot] [PATCH 6/6] i.mx: i.mx6q: Add the initial support for i.mx6q ARM2 board Jason Liu
2011-11-12 19:42   ` Fabio Estevam
2011-11-14  8:59     ` Jason Hui
2011-11-12 20:13   ` Fabio Estevam
2011-11-14  9:10     ` Jason Hui
2011-11-13  7:04   ` Igor Grinberg
2011-11-14  9:13     ` Jason Hui
2011-11-14  9:25   ` Stefano Babic
2011-11-14  9:55     ` Jason Hui
2011-11-14 11:36       ` Stefano Babic
2011-11-16 11:34   ` Dirk Behme
2011-11-16 12:15     ` Jason Hui
2011-11-12 16:10 ` [U-Boot] [PATCH 0/6] i.mx: add the initial i.mx6q core/board support Dirk Behme
2011-11-14  8:11   ` Jason Hui
2011-11-16 11:56 ` Dirk Behme [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4EC3A4F4.8080701@de.bosch.com \
    --to=dirk.behme@de.bosch.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox