From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Thu, 17 Nov 2011 07:39:01 +0100
Subject: [U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs
 prior to using gpio_get_value
In-Reply-To: <1321372293-3182-1-git-send-email-festevam@gmail.com>
References: <1321372293-3182-1-git-send-email-festevam@gmail.com>
Message-ID: <4EC4AC05.7060004@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 11/15/2011 04:51 PM, Fabio Estevam wrote:
> Configure the pins as GPIO prior to using gpio_get_value.
>
> Cc: Jason Liu<r64343@freescale.com>
> Signed-off-by: Fabio Estevam<fabio.estevam@freescale.com>
> ---
>   board/freescale/mx53loco/mx53loco.c |    3 +++
>   1 files changed, 3 insertions(+), 0 deletions(-)
>

Applied to u-boot-imx, thanks

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================