[U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get

public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed

* [U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
@ 2011-11-15 15:51 Fabio Estevam
  2011-11-15 15:51 ` [U-Boot] [PATCH 2/5] mx53ard: " Fabio Estevam
                   ` (5 more replies)
  0 siblings, 6 replies; 12+ messages in thread
From: Fabio Estevam @ 2011-11-15 15:51 UTC (permalink / raw)
  To: u-boot

Configure the pins as GPIO prior to using gpio_get_value.

Cc: Jason Liu <r64343@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 board/freescale/mx53loco/mx53loco.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index b4c7f33..5e5c38f 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -139,6 +139,9 @@ struct fsl_esdhc_cfg esdhc_cfg[2] = {
 int board_mmc_getcd(u8 *cd, struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+
+	mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
+	mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
 
 	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
 		*cd = gpio_get_value(77); /*GPIO3_13*/
-- 
1.7.1

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [U-Boot] [PATCH 2/5] mx53ard: Configure the pins as GPIOs prior to using gpio_get_value
  2011-11-15 15:51 [U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value Fabio Estevam
@ 2011-11-15 15:51 ` Fabio Estevam
  2011-11-17  6:39   ` Stefano Babic
  2011-11-15 15:51 ` [U-Boot] [PATCH 3/5] mx53evk: " Fabio Estevam
                   ` (4 subsequent siblings)
  5 siblings, 1 reply; 12+ messages in thread
From: Fabio Estevam @ 2011-11-15 15:51 UTC (permalink / raw)
  To: u-boot

Configure the pins as GPIO prior to using gpio_get_value.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 board/freescale/mx53ard/mx53ard.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c
index be32aee..e5a1142 100644
--- a/board/freescale/mx53ard/mx53ard.c
+++ b/board/freescale/mx53ard/mx53ard.c
@@ -87,6 +87,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 
+	mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
+	mxc_request_iomux(MX53_PIN_GPIO_4, IOMUX_CONFIG_ALT1);
+
 	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
 		*cd = gpio_get_value(1); /*GPIO1_1*/
 	else
-- 
1.7.1

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [U-Boot] [PATCH 2/5] mx53ard: Configure the pins as GPIOs prior to using gpio_get_value
  2011-11-15 15:51 ` [U-Boot] [PATCH 2/5] mx53ard: " Fabio Estevam
@ 2011-11-17  6:39   ` Stefano Babic
  0 siblings, 0 replies; 12+ messages in thread
From: Stefano Babic @ 2011-11-17  6:39 UTC (permalink / raw)
  To: u-boot

On 11/15/2011 04:51 PM, Fabio Estevam wrote:
> Configure the pins as GPIO prior to using gpio_get_value.
>
> Signed-off-by: Fabio Estevam<fabio.estevam@freescale.com>
> ---
>   board/freescale/mx53ard/mx53ard.c |    3 +++
>   1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c
> index be32aee..e5a1142 100644
> --- a/board/freescale/mx53ard/mx53ard.c
> +++ b/board/freescale/mx53ard/mx53ard.c
> @@ -87,6 +87,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)
>   {
>   	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
>
> +	mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
> +	mxc_request_iomux(MX53_PIN_GPIO_4, IOMUX_CONFIG_ALT1);
> +
>   	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
>   		*cd = gpio_get_value(1); /*GPIO1_1*/
>   	else

Applied to u-boot-imx, thanks

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [U-Boot] [PATCH 3/5] mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
  2011-11-15 15:51 [U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value Fabio Estevam
  2011-11-15 15:51 ` [U-Boot] [PATCH 2/5] mx53ard: " Fabio Estevam
@ 2011-11-15 15:51 ` Fabio Estevam
  2011-11-16  6:53   ` Jason Liu
  2011-11-17  6:39   ` Stefano Babic
  2011-11-15 15:51 ` [U-Boot] [PATCH 4/5] mx53smd: " Fabio Estevam
                   ` (3 subsequent siblings)
  5 siblings, 2 replies; 12+ messages in thread
From: Fabio Estevam @ 2011-11-15 15:51 UTC (permalink / raw)
  To: u-boot

Configure the pins as GPIO prior to using gpio_get_value.

Cc: Jason Liu <r64343@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 board/freescale/mx53evk/mx53evk.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c
index 335661f..aa4a2c9 100644
--- a/board/freescale/mx53evk/mx53evk.c
+++ b/board/freescale/mx53evk/mx53evk.c
@@ -212,6 +212,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 
+	mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
+	mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
+
 	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
 		*cd = gpio_get_value(77); /*GPIO3_13*/
 	else
-- 
1.7.1

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [U-Boot] [PATCH 3/5] mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
  2011-11-15 15:51 ` [U-Boot] [PATCH 3/5] mx53evk: " Fabio Estevam
@ 2011-11-16  6:53   ` Jason Liu
  2011-11-17  6:39   ` Stefano Babic
  1 sibling, 0 replies; 12+ messages in thread
From: Jason Liu @ 2011-11-16  6:53 UTC (permalink / raw)
  To: u-boot

2011/11/15 Fabio Estevam <festevam@gmail.com>:
> Configure the pins as GPIO prior to using gpio_get_value.
>
> Cc: Jason Liu <r64343@freescale.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Acked-by: Jason Liu <jason.hui@linaro.org>

> ---
> ?board/freescale/mx53evk/mx53evk.c | ? ?3 +++
> ?1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c
> index 335661f..aa4a2c9 100644
> --- a/board/freescale/mx53evk/mx53evk.c
> +++ b/board/freescale/mx53evk/mx53evk.c
> @@ -212,6 +212,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)
> ?{
> ? ? ? ?struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
>
> + ? ? ? mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
> + ? ? ? mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
> +
> ? ? ? ?if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
> ? ? ? ? ? ? ? ?*cd = gpio_get_value(77); /*GPIO3_13*/
> ? ? ? ?else
> --
> 1.7.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [U-Boot] [PATCH 3/5] mx53evk: Configure the pins as GPIOs prior to using gpio_get_value
  2011-11-15 15:51 ` [U-Boot] [PATCH 3/5] mx53evk: " Fabio Estevam
  2011-11-16  6:53   ` Jason Liu
@ 2011-11-17  6:39   ` Stefano Babic
  1 sibling, 0 replies; 12+ messages in thread
From: Stefano Babic @ 2011-11-17  6:39 UTC (permalink / raw)
  To: u-boot

On 11/15/2011 04:51 PM, Fabio Estevam wrote:
> Configure the pins as GPIO prior to using gpio_get_value.
>
> Cc: Jason Liu<r64343@freescale.com>
> Signed-off-by: Fabio Estevam<fabio.estevam@freescale.com>
> ---
>   board/freescale/mx53evk/mx53evk.c |    3 +++
>   1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c
> index 335661f..aa4a2c9 100644
> --- a/board/freescale/mx53evk/mx53evk.c
> +++ b/board/freescale/mx53evk/mx53evk.c
> @@ -212,6 +212,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)
>   {
>   	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
>
> +	mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
> +	mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
> +
>   	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
>   		*cd = gpio_get_value(77); /*GPIO3_13*/
>   	else
Applied to u-boot-imx, thanks

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [U-Boot] [PATCH 4/5] mx53smd: Configure the pins as GPIOs prior to using gpio_get_value
  2011-11-15 15:51 [U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value Fabio Estevam
  2011-11-15 15:51 ` [U-Boot] [PATCH 2/5] mx53ard: " Fabio Estevam
  2011-11-15 15:51 ` [U-Boot] [PATCH 3/5] mx53evk: " Fabio Estevam
@ 2011-11-15 15:51 ` Fabio Estevam
  2011-11-17  6:39   ` Stefano Babic
  2011-11-15 15:51 ` [U-Boot] [PATCH 5/5] mx51evk: " Fabio Estevam
                   ` (2 subsequent siblings)
  5 siblings, 1 reply; 12+ messages in thread
From: Fabio Estevam @ 2011-11-15 15:51 UTC (permalink / raw)
  To: u-boot

Configure the pins as GPIO prior to using gpio_get_value.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 board/freescale/mx53smd/mx53smd.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c
index 87fa7fa..55af4e4 100644
--- a/board/freescale/mx53smd/mx53smd.c
+++ b/board/freescale/mx53smd/mx53smd.c
@@ -134,6 +134,7 @@ struct fsl_esdhc_cfg esdhc_cfg[1] = {
 
 int board_mmc_getcd(u8 *cd, struct mmc *mmc)
 {
+	mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
 	*cd = gpio_get_value(77); /*GPIO3_13*/
 
 	return 0;
-- 
1.7.1

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [U-Boot] [PATCH 4/5] mx53smd: Configure the pins as GPIOs prior to using gpio_get_value
  2011-11-15 15:51 ` [U-Boot] [PATCH 4/5] mx53smd: " Fabio Estevam
@ 2011-11-17  6:39   ` Stefano Babic
  0 siblings, 0 replies; 12+ messages in thread
From: Stefano Babic @ 2011-11-17  6:39 UTC (permalink / raw)
  To: u-boot

On 11/15/2011 04:51 PM, Fabio Estevam wrote:
> Configure the pins as GPIO prior to using gpio_get_value.
>
> Signed-off-by: Fabio Estevam<fabio.estevam@freescale.com>
> ---
>   board/freescale/mx53smd/mx53smd.c |    1 +
>   1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c
> index 87fa7fa..55af4e4 100644
> --- a/board/freescale/mx53smd/mx53smd.c
> +++ b/board/freescale/mx53smd/mx53smd.c
> @@ -134,6 +134,7 @@ struct fsl_esdhc_cfg esdhc_cfg[1] = {
>
>   int board_mmc_getcd(u8 *cd, struct mmc *mmc)
>   {
> +	mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
>   	*cd = gpio_get_value(77); /*GPIO3_13*/
>
>   	return 0;

Applied to u-boot-imx, thanks

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [U-Boot] [PATCH 5/5] mx51evk: Configure the pins as GPIOs prior to using gpio_get_value
  2011-11-15 15:51 [U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value Fabio Estevam
                   ` (2 preceding siblings ...)
  2011-11-15 15:51 ` [U-Boot] [PATCH 4/5] mx53smd: " Fabio Estevam
@ 2011-11-15 15:51 ` Fabio Estevam
  2011-11-17  6:40   ` Stefano Babic
  2011-11-16  6:53 ` [U-Boot] [PATCH 1/5] mx53loco: " Jason Liu
  2011-11-17  6:39 ` Stefano Babic
  5 siblings, 1 reply; 12+ messages in thread
From: Fabio Estevam @ 2011-11-15 15:51 UTC (permalink / raw)
  To: u-boot

Configure the pins as GPIO prior to using gpio_get_value.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 board/freescale/mx51evk/mx51evk.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 37e6e4d..e5b0929 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -265,6 +265,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 
+	mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1);
+	mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
+
 	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
 		*cd = gpio_get_value(0);
 	else
-- 
1.7.1

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [U-Boot] [PATCH 5/5] mx51evk: Configure the pins as GPIOs prior to using gpio_get_value
  2011-11-15 15:51 ` [U-Boot] [PATCH 5/5] mx51evk: " Fabio Estevam
@ 2011-11-17  6:40   ` Stefano Babic
  0 siblings, 0 replies; 12+ messages in thread
From: Stefano Babic @ 2011-11-17  6:40 UTC (permalink / raw)
  To: u-boot

On 11/15/2011 04:51 PM, Fabio Estevam wrote:
> Configure the pins as GPIO prior to using gpio_get_value.
>
> Signed-off-by: Fabio Estevam<fabio.estevam@freescale.com>
> ---
>   board/freescale/mx51evk/mx51evk.c |    3 +++
>   1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
> index 37e6e4d..e5b0929 100644
> --- a/board/freescale/mx51evk/mx51evk.c
> +++ b/board/freescale/mx51evk/mx51evk.c
> @@ -265,6 +265,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)
>   {
>   	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
>
> +	mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1);
> +	mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
> +
>   	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
>   		*cd = gpio_get_value(0);
>   	else

Applied to u-boot-imx, thanks

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
  2011-11-15 15:51 [U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value Fabio Estevam
                   ` (3 preceding siblings ...)
  2011-11-15 15:51 ` [U-Boot] [PATCH 5/5] mx51evk: " Fabio Estevam
@ 2011-11-16  6:53 ` Jason Liu
  2011-11-17  6:39 ` Stefano Babic
  5 siblings, 0 replies; 12+ messages in thread
From: Jason Liu @ 2011-11-16  6:53 UTC (permalink / raw)
  To: u-boot

2011/11/15 Fabio Estevam <festevam@gmail.com>:
> Configure the pins as GPIO prior to using gpio_get_value.
>
> Cc: Jason Liu <r64343@freescale.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Acked-by: Jason Liu <jason.hui@linaro.org>

> ---
> ?board/freescale/mx53loco/mx53loco.c | ? ?3 +++
> ?1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
> index b4c7f33..5e5c38f 100644
> --- a/board/freescale/mx53loco/mx53loco.c
> +++ b/board/freescale/mx53loco/mx53loco.c
> @@ -139,6 +139,9 @@ struct fsl_esdhc_cfg esdhc_cfg[2] = {
> ?int board_mmc_getcd(u8 *cd, struct mmc *mmc)
> ?{
> ? ? ? ?struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
> +
> + ? ? ? mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1);
> + ? ? ? mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1);
>
> ? ? ? ?if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
> ? ? ? ? ? ? ? ?*cd = gpio_get_value(77); /*GPIO3_13*/
> --
> 1.7.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value
  2011-11-15 15:51 [U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value Fabio Estevam
                   ` (4 preceding siblings ...)
  2011-11-16  6:53 ` [U-Boot] [PATCH 1/5] mx53loco: " Jason Liu
@ 2011-11-17  6:39 ` Stefano Babic
  5 siblings, 0 replies; 12+ messages in thread
From: Stefano Babic @ 2011-11-17  6:39 UTC (permalink / raw)
  To: u-boot

On 11/15/2011 04:51 PM, Fabio Estevam wrote:
> Configure the pins as GPIO prior to using gpio_get_value.
>
> Cc: Jason Liu<r64343@freescale.com>
> Signed-off-by: Fabio Estevam<fabio.estevam@freescale.com>
> ---
>   board/freescale/mx53loco/mx53loco.c |    3 +++
>   1 files changed, 3 insertions(+), 0 deletions(-)
>

Applied to u-boot-imx, thanks

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2011-11-17  6:40 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-11-15 15:51 [U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value Fabio Estevam
2011-11-15 15:51 ` [U-Boot] [PATCH 2/5] mx53ard: " Fabio Estevam
2011-11-17  6:39   ` Stefano Babic
2011-11-15 15:51 ` [U-Boot] [PATCH 3/5] mx53evk: " Fabio Estevam
2011-11-16  6:53   ` Jason Liu
2011-11-17  6:39   ` Stefano Babic
2011-11-15 15:51 ` [U-Boot] [PATCH 4/5] mx53smd: " Fabio Estevam
2011-11-17  6:39   ` Stefano Babic
2011-11-15 15:51 ` [U-Boot] [PATCH 5/5] mx51evk: " Fabio Estevam
2011-11-17  6:40   ` Stefano Babic
2011-11-16  6:53 ` [U-Boot] [PATCH 1/5] mx53loco: " Jason Liu
2011-11-17  6:39 ` Stefano Babic

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox