From mboxrd@z Thu Jan  1 00:00:00 1970
From: Manojkumar <manojd@fossilshale.com>
Date: Thu, 17 Nov 2011 14:37:33 +0530
Subject: [U-Boot] [PATCH 20/20] M28EVK: Enable USB HOST support
In-Reply-To: <201111141521.52300.marek.vasut@gmail.com>
References: <20111112053752.97565ggsw3sbifm8@mail.fossilshale.com>
	<201111141148.16115.marek.vasut@gmail.com>
	<4EC11505.1010403@fossilshale.com>
	<201111141521.52300.marek.vasut@gmail.com>
Message-ID: <4EC4CED5.7000304@fossilshale.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Marek Vasut wrote:
>> Marek Vasut wrote:
>>     
>>>> Marek Vasut wrote:
>>>>         
>>>>>> Hi Marek,
>>>>>>
>>>>>> u-boot-v2011.09 doesn't support for imx28. I need complete support
>>>>>> patch for mx28. where can i get those patches?
>>>>>>
>>>>>> for which version of u-boot this patches supports..?
>>>>>>
>>>>>>
>>>>>> Regards,
>>>>>> Manoj
>>>>>>             
>>>>> http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary
>>>>>
>>>>> M
>>>>>           
>>>> Thanks Marek,
>>>> Patches applied..
>>>> on usb start command i'm getting "scanning bus for devices... New Device
>>>> 0" then its freezes after  getting the debug message
>>>> "enabling power on all ports
>>>> usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1
>>>> length 0x0"
>>>> can u help me on this further?
>>>>
>>>> Regards,
>>>> Manoj
>>>>         
>>> There is a mail with subject "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c
>>> on xscale" in uboot ML ... apply the patch and retry. What GCC do you
>>> use?
>>>
>>> M
>>>       
>> Hello Marek,
>>
>> I'm using
>> u-boot version : u-boot-imx
>>
>> gcc version:4.3.3
>>
>> When i try to add this Patch "[U-Boot] [PATCH] GCC4.6: Fix common/usb.c
>> on xscale"
>> I'm getting:
>> patching file usb.c
>> Hunk #1 FAILED at 263.
>> Hunk #2 FAILED at 313.
>> 2 out of 2 hunks FAILED -- saving rejects to file usb.c.rej
>>
>> then i made some changes for common/usb.c as per the patch,even it gets
>> freezes after printing the debug msg.
>> "enabling power on all ports
>> usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1
>> length 0x0"
>>
>> Regards,
>> Manoj
>>     
>
> Are you using top-of-the-tree u-boot-imx/master? You shouldn't need to apply any 
> patches. That'd explain why you're getting errors applying the last USB patch I 
> suggested.
>
> Also, please try ELDK5.0 toolchain.
>
> M
>
>   
Marek,

ya i'm using master code and now its working fine..

Regards,
Manoj