From: Igor Grinberg <grinberg@compulab.co.il>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/3] ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused
Date: Sun, 20 Nov 2011 09:05:20 +0200 [thread overview]
Message-ID: <4EC8A6B0.9070004@compulab.co.il> (raw)
In-Reply-To: <1321613041-24522-4-git-send-email-weber@corscience.de>
On 11/18/11 12:44, Thomas Weber wrote:
> This patch removes the definition of stack sizes for
> irq and fiq if the CONFIG_USE_IRQ is undefined before.
>
> Signed-off-by: Thomas Weber <weber@corscience.de>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
> ---
> include/configs/am3517_crane.h | 4 ----
> include/configs/am3517_evm.h | 4 ----
> include/configs/apollon.h | 4 ----
> include/configs/cm_t35.h | 4 ----
> include/configs/devkit8000.h | 4 ----
> include/configs/omap3_beagle.h | 4 ----
> include/configs/omap3_evm_common.h | 5 -----
> include/configs/omap3_mvblx.h | 4 ----
> include/configs/omap3_overo.h | 4 ----
> include/configs/omap3_pandora.h | 4 ----
> include/configs/omap3_sdp3430.h | 4 ----
> include/configs/omap3_zoom1.h | 4 ----
> include/configs/omap3_zoom2.h | 4 ----
> 13 files changed, 0 insertions(+), 53 deletions(-)
>
> diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
> index 350a570..6748743 100644
> --- a/include/configs/am3517_crane.h
> +++ b/include/configs/am3517_crane.h
> @@ -264,10 +264,6 @@
> * The stack sizes are set up in start.S using the settings below
> */
> #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
> -#ifdef CONFIG_USE_IRQ
> -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
> -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
> -#endif
>
> /*-----------------------------------------------------------------------
> * Physical Memory Map
> diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
> index 83098e4..cf91e3f 100644
> --- a/include/configs/am3517_evm.h
> +++ b/include/configs/am3517_evm.h
> @@ -263,10 +263,6 @@
> * The stack sizes are set up in start.S using the settings below
> */
> #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
> -#ifdef CONFIG_USE_IRQ
> -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
> -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
> -#endif
>
> /*-----------------------------------------------------------------------
> * Physical Memory Map
> diff --git a/include/configs/apollon.h b/include/configs/apollon.h
> index 46595d9..7fcf437 100644
> --- a/include/configs/apollon.h
> +++ b/include/configs/apollon.h
> @@ -211,10 +211,6 @@
> * The stack sizes are set up in start.S using the settings below
> */
> #define CONFIG_STACKSIZE SZ_128K /* regular stack */
> -#ifdef CONFIG_USE_IRQ
> -# define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */
> -# define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */
> -#endif
>
> /*-----------------------------------------------------------------------
> * Physical Memory Map
> diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
> index 38f0d9c..257f6ff 100644
> --- a/include/configs/cm_t35.h
> +++ b/include/configs/cm_t35.h
> @@ -283,10 +283,6 @@
> * The stack sizes are set up in start.S using the settings below
> */
> #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
> -#ifdef CONFIG_USE_IRQ
> -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
> -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
> -#endif
>
> /*-----------------------------------------------------------------------
> * Physical Memory Map
> diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
> index 085950d..f5d9a5e 100644
> --- a/include/configs/devkit8000.h
> +++ b/include/configs/devkit8000.h
> @@ -275,10 +275,6 @@
>
> /* The stack sizes are set up in start.S using the settings below */
> #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
> -#ifdef CONFIG_USE_IRQ
> -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
> -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
> -#endif
>
> /* Physical Memory Map */
> #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
> diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
> index b418002..263038b 100644
> --- a/include/configs/omap3_beagle.h
> +++ b/include/configs/omap3_beagle.h
> @@ -336,10 +336,6 @@
> * The stack sizes are set up in start.S using the settings below
> */
> #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
> -#ifdef CONFIG_USE_IRQ
> -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
> -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
> -#endif
>
> /*-----------------------------------------------------------------------
> * Physical Memory Map
> diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
> index 8a22835..8210afe 100644
> --- a/include/configs/omap3_evm_common.h
> +++ b/include/configs/omap3_evm_common.h
> @@ -58,11 +58,6 @@
> */
> #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
>
> -#ifdef CONFIG_USE_IRQ
> -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
> -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
> -#endif
> -
> /*
> * Physical Memory Map
> * Note 1: CS1 may or may not be populated
> diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h
> index d6a40c7..7c0d7f6 100644
> --- a/include/configs/omap3_mvblx.h
> +++ b/include/configs/omap3_mvblx.h
> @@ -256,10 +256,6 @@
> * The stack sizes are set up in start.S using the settings below
> */
> #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
> -#ifdef CONFIG_USE_IRQ
> -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
> -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
> -#endif
>
> /*-----------------------------------------------------------------------
> * Physical Memory Map
> diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
> index 9670981..2d5d120 100644
> --- a/include/configs/omap3_overo.h
> +++ b/include/configs/omap3_overo.h
> @@ -243,10 +243,6 @@
> * The stack sizes are set up in start.S using the settings below
> */
> #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
> -#ifdef CONFIG_USE_IRQ
> -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
> -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
> -#endif
>
> /*-----------------------------------------------------------------------
> * Physical Memory Map
> diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
> index 56fc0dc..e80ca7a 100644
> --- a/include/configs/omap3_pandora.h
> +++ b/include/configs/omap3_pandora.h
> @@ -227,10 +227,6 @@
> * The stack sizes are set up in start.S using the settings below
> */
> #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
> -#ifdef CONFIG_USE_IRQ
> -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
> -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
> -#endif
>
> /*-----------------------------------------------------------------------
> * Physical Memory Map
> diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
> index 5b62a16..a6cf41a 100644
> --- a/include/configs/omap3_sdp3430.h
> +++ b/include/configs/omap3_sdp3430.h
> @@ -303,10 +303,6 @@
> * The stack sizes are set up in start.S using the settings below
> */
> #define CONFIG_STACKSIZE (128 << 10) /* Regular stack */
> -#ifdef CONFIG_USE_IRQ
> -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */
> -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */
> -#endif
>
> #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
> #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
> diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
> index 9fa5f0e..d2b2f34 100644
> --- a/include/configs/omap3_zoom1.h
> +++ b/include/configs/omap3_zoom1.h
> @@ -258,10 +258,6 @@
> * The stack sizes are set up in start.S using the settings below
> */
> #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
> -#ifdef CONFIG_USE_IRQ
> -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
> -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
> -#endif
>
> /*-----------------------------------------------------------------------
> * Physical Memory Map
> diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
> index 1dc0240..e5c375b 100644
> --- a/include/configs/omap3_zoom2.h
> +++ b/include/configs/omap3_zoom2.h
> @@ -226,10 +226,6 @@
> * The stack sizes are set up in start.S using these settings
> */
> #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
> -#ifdef CONFIG_USE_IRQ
> -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
> -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
> -#endif
>
> /*-----------------------------------------------------------------------
> * Physical Memory Map
--
Regards,
Igor.
next prev parent reply other threads:[~2011-11-20 7:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-18 10:43 [U-Boot] [PATCH 0/3] Remove unused definitions from config files Thomas Weber
2011-11-18 10:43 ` [U-Boot] [PATCH 1/3] ARM: OMAP3: Remove unused define CONFIG_OMAP3430 Thomas Weber
2011-11-20 7:03 ` Igor Grinberg
2011-11-18 10:44 ` [U-Boot] [PATCH 2/3] ARM: OMAP3: Remove unused define SDRC_R_C_B Thomas Weber
2011-11-20 7:04 ` Igor Grinberg
2011-11-18 10:44 ` [U-Boot] [PATCH 3/3] ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused Thomas Weber
2011-11-20 7:05 ` Igor Grinberg [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-11-22 11:23 [U-Boot] [PATCH 1/3] ARM: OMAP3: Remove unused define CONFIG_OMAP3430 Thomas Weber
2011-11-22 11:23 ` [U-Boot] [PATCH 3/3] ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused Thomas Weber
2011-11-22 14:24 ` Tom Rini
2011-11-22 16:49 ` Enric Balletbò i Serra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EC8A6B0.9070004@compulab.co.il \
--to=grinberg@compulab.co.il \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox