[U-Boot] [PATCH 00/10] another round of GCC 4.6 warning fixes

[U-Boot] [PATCH 00/10] another round of GCC 4.6 warning fixes

[Anatolij Gustschin]

These patches can also be pulled from

 git://git.denx.de/u-boot-video.git gcc46-warning-fixes

Anatolij Gustschin (10):
  drivers/usb/musb/musb_hcd.c: Fix GCC 4.6 warning
  drivers/mtd/onenand/samsung.c: Fix GCC 4.6 warning
  board/ronetix/pm9263/pm9263.c: Fix GCC 4.6 warning
  drivers/net/lan91c96.c: Fix GCC 4.6 warning
  arch/arm/cpu/arm926ejs/omap/cpuinfo.c: Fix GCC 4.6 warnings
  drivers/net/cs8900.c: Fix GCC 4.6 warning
  board/lubbock/flash.c: Fix GCC 4.6 warnings
  board/mx1ads/syncflash.c: Fix GCC 4.6 warnings
  board/mx1ads/mx1ads.c: Fix GCC 4.6 warning
  common/cmd_bootm.c: Fix GCC 4.6 warnings

 arch/arm/cpu/arm926ejs/omap/cpuinfo.c |    5 +++--
 board/lubbock/flash.c                 |    7 +++----
 board/mx1ads/mx1ads.c                 |    7 +++----
 board/mx1ads/syncflash.c              |   20 +++++++++-----------
 board/ronetix/pm9263/pm9263.c         |   13 ++++++-------
 common/cmd_bootm.c                    |    3 ++-
 drivers/mtd/onenand/samsung.c         |    3 +--
 drivers/net/cs8900.c                  |   11 +++++------
 drivers/net/lan91c96.c                |    7 ++-----
 drivers/usb/musb/musb_hcd.c           |    3 +--
 10 files changed, 35 insertions(+), 44 deletions(-)

-- 
1.7.5.4

[U-Boot] [PATCH 01/10] drivers/usb/musb/musb_hcd.c: Fix GCC 4.6 warning

[Anatolij Gustschin]

Fix:
musb_hcd.c: In function 'submit_control_msg':
musb_hcd.c:851:6: warning: variable 'csr' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 drivers/usb/musb/musb_hcd.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 974bb31..325edb9 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -848,7 +848,6 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 			int len, struct devrequest *setup)
 {
 	int devnum = usb_pipedevice(pipe);
-	u16 csr;
 	u8  devspeed;
 
 #ifdef MUSB_NO_MULTIPOINT
@@ -862,7 +861,7 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 
 	/* select control endpoint */
 	writeb(MUSB_CONTROL_EP, &musbr->index);
-	csr = readw(&musbr->txcsr);
+	readw(&musbr->txcsr);
 
 #ifndef MUSB_NO_MULTIPOINT
 	/* target addr and (for multipoint) hub addr/port */
-- 
1.7.5.4

[U-Boot] [PATCH 02/10] drivers/mtd/onenand/samsung.c: Fix GCC 4.6 warning

[Anatolij Gustschin]

Fix:
samsung.c: In function 's3c_onenand_check_lock_status':
samsung.c:486:6: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 drivers/mtd/onenand/samsung.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index 20b4912..ff59064 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -483,12 +483,11 @@ static void s3c_onenand_check_lock_status(struct mtd_info *mtd)
 {
 	struct onenand_chip *this = mtd->priv;
 	unsigned int block, end;
-	int tmp;
 
 	end = this->chipsize >> this->erase_shift;
 
 	for (block = 0; block < end; block++) {
-		tmp = s3c_read_cmd(CMD_MAP_01(onenand->mem_addr(block, 0, 0)));
+		s3c_read_cmd(CMD_MAP_01(onenand->mem_addr(block, 0, 0)));
 
 		if (readl(&onenand->reg->int_err_stat) & LOCKED_BLK) {
 			printf("block %d is write-protected!\n", block);
-- 
1.7.5.4

[U-Boot] [PATCH 03/10] board/ronetix/pm9263/pm9263.c: Fix GCC 4.6 warning

[Anatolij Gustschin]

Fix:
pm9263.c: In function 'pm9263_lcd_hw_psram_init':
pm9263.c:167:20: warning: variable 'x' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 board/ronetix/pm9263/pm9263.c |   13 ++++++-------
 1 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index b0f7ea6..335efba 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -164,7 +164,6 @@ void lcd_disable(void)
 /* Initialize the PSRAM memory */
 static int pm9263_lcd_hw_psram_init(void)
 {
-	volatile uint16_t x;
 	unsigned long csa;
 	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC1;
 	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
@@ -196,14 +195,14 @@ static int pm9263_lcd_hw_psram_init(void)
 	at91_set_pio_value(PSRAM_CRE_PIN, 0);	/* set PSRAM_CRE_PIN to '0' */
 
 	/* PSRAM: write BCR */
-	x = readw(PSRAM_CTRL_REG);
-	x = readw(PSRAM_CTRL_REG);
+	readw(PSRAM_CTRL_REG);
+	readw(PSRAM_CTRL_REG);
 	writew(1, PSRAM_CTRL_REG);	/* 0 - RCR,1 - BCR */
 	writew(0x9d4f, PSRAM_CTRL_REG);	/* write the BCR */
 
 	/* write RCR of the PSRAM */
-	x = readw(PSRAM_CTRL_REG);
-	x = readw(PSRAM_CTRL_REG);
+	readw(PSRAM_CTRL_REG);
+	readw(PSRAM_CTRL_REG);
 	writew(0, PSRAM_CTRL_REG);	/* 0 - RCR,1 - BCR */
 	/* set RCR; 0x10-async mode,0x90-page mode */
 	writew(0x90, PSRAM_CTRL_REG);
@@ -222,8 +221,8 @@ static int pm9263_lcd_hw_psram_init(void)
 		at91_set_pio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */
 
 		/* write RCR of the PSRAM */
-		x = readw(PSRAM_CTRL_REG);
-		x = readw(PSRAM_CTRL_REG);
+		readw(PSRAM_CTRL_REG);
+		readw(PSRAM_CTRL_REG);
 		writew(0, PSRAM_CTRL_REG);	/* 0 - RCR,1 - BCR */
 		/* set RCR;0x10-async mode,0x90-page mode */
 		writew(0x90, PSRAM_CTRL_REG);
-- 
1.7.5.4

[U-Boot] [PATCH 04/10] drivers/net/lan91c96.c: Fix GCC 4.6 warning

[Anatolij Gustschin]

Fix:
lan91c96.c: In function 'dump_memory_info':
lan91c96.c:157:7: warning: variable 'mem_info' set but not used
[-Wunused-but-set-variable]
lan91c96.c: In function 'smc_send_packet':
lan91c96.c:320:16: warning: variable 'ioaddr' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 drivers/net/lan91c96.c |    7 ++-----
 1 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
index 883f3a7..24b28da 100644
--- a/drivers/net/lan91c96.c
+++ b/drivers/net/lan91c96.c
@@ -63,6 +63,7 @@
 #include <malloc.h>
 #include "lan91c96.h"
 #include <net.h>
+#include <linux/compiler.h>
 
 /*------------------------------------------------------------------------
  *
@@ -154,7 +155,7 @@ static void smc_set_mac_addr(const unsigned char *addr)
  ***********************************************/
 void dump_memory_info(struct eth_device *dev)
 {
-	word mem_info;
+	__maybe_unused word mem_info;
 	word old_bank;
 
 	old_bank = SMC_inw(dev, LAN91C96_BANK_SELECT) & 0xF;
@@ -317,7 +318,6 @@ static int smc_send_packet(struct eth_device *dev, volatile void *packet,
 		int packet_length)
 {
 	byte packet_no;
-	unsigned long ioaddr;
 	byte *buf;
 	int length;
 	int numPages;
@@ -381,9 +381,6 @@ static int smc_send_packet(struct eth_device *dev, volatile void *packet,
 			 dev->name, try);
 
 	/* I can send the packet now.. */
-
-	ioaddr = dev->iobase;
-
 	buf = (byte *) packet;
 
 	/* If I get here, I _know_ there is a packet slot waiting for me */
-- 
1.7.5.4

[U-Boot] [PATCH 05/10] arch/arm/cpu/arm926ejs/omap/cpuinfo.c: Fix GCC 4.6 warnings

[Anatolij Gustschin]

Fix:
cpuinfo.c: In function 'print_cpuinfo':
cpuinfo.c:155:6: warning: variable 'system_serial_low' set but not used
[-Wunused-but-set-variable]
cpuinfo.c:154:6: warning: variable 'system_serial_high' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 arch/arm/cpu/arm926ejs/omap/cpuinfo.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/omap/cpuinfo.c b/arch/arm/cpu/arm926ejs/omap/cpuinfo.c
index 0052dab..02332ee 100644
--- a/arch/arm/cpu/arm926ejs/omap/cpuinfo.c
+++ b/arch/arm/cpu/arm926ejs/omap/cpuinfo.c
@@ -11,6 +11,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <linux/compiler.h>
 
 #if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP)
 
@@ -151,8 +152,8 @@ int print_cpuinfo (void)
 	u8 die_rev;
 	u32 omap_id;
 	u8 cpu_type;
-	u32 system_serial_high;
-	u32 system_serial_low;
+	__maybe_unused u32 system_serial_high;
+	__maybe_unused u32 system_serial_low;
 	u32 system_rev = 0;
 
 	jtag_id = omap_get_jtag_id();
-- 
1.7.5.4

[U-Boot] [PATCH 06/10] drivers/net/cs8900.c: Fix GCC 4.6 warning

[Anatolij Gustschin]

Fix:
cs8900.c: In function 'get_reg_init_bus':
cs8900.c:69:14: warning: variable 'c' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 drivers/net/cs8900.c |   11 +++++------
 1 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/cs8900.c b/drivers/net/cs8900.c
index 9424fb2..e04a784 100644
--- a/drivers/net/cs8900.c
+++ b/drivers/net/cs8900.c
@@ -66,15 +66,14 @@
 static u16 get_reg_init_bus(struct eth_device *dev, int regno)
 {
 	/* force 16 bit busmode */
-	volatile u8 c;
 	struct cs8900_priv *priv = (struct cs8900_priv *)(dev->priv);
 	uint8_t volatile * const iob = (uint8_t volatile * const)dev->iobase;
 
-	c = readb(iob);
-	c = readb(iob + 1);
-	c = readb(iob);
-	c = readb(iob + 1);
-	c = readb(iob);
+	readb(iob);
+	readb(iob + 1);
+	readb(iob);
+	readb(iob + 1);
+	readb(iob);
 
 	REG_WRITE(regno, &priv->regs->pptr);
 	return REG_READ(&priv->regs->pdata);
-- 
1.7.5.4

[U-Boot] [PATCH 07/10] board/lubbock/flash.c: Fix GCC 4.6 warnings

[Anatolij Gustschin]

Fix:
flash.c: In function 'flash_erase':
flash.c:223:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable]
flash.c: In function 'write_data':
flash.c:392:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 board/lubbock/flash.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/board/lubbock/flash.c b/board/lubbock/flash.c
index e1e7807..bf8f0c9 100644
--- a/board/lubbock/flash.c
+++ b/board/lubbock/flash.c
@@ -220,7 +220,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 
 int flash_erase (flash_info_t *info, int s_first, int s_last)
 {
-	int flag, prot, sect;
+	int prot, sect;
 	ulong type, start;
 	int rcode = 0;
 
@@ -255,7 +255,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 	}
 
 	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
+	disable_interrupts();
 
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect <= s_last; sect++) {
@@ -389,7 +389,6 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 {
 	FPWV *addr = (FPWV *) dest;
 	ulong status;
-	int flag;
 	ulong start;
 
 	/* Check if Flash is (sufficiently) erased */
@@ -398,7 +397,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 		return (2);
 	}
 	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
+	disable_interrupts();
 
 	*addr = (FPW) 0x00400040;	/* write setup */
 	*addr = data;
-- 
1.7.5.4

[U-Boot] [PATCH 08/10] board/mx1ads/syncflash.c: Fix GCC 4.6 warnings

[Anatolij Gustschin]

Fix:
syncflash.c: In function 'SF_SR':
syncflash.c:60:10: warning: variable 'tmp1' set but not used
[-Wunused-but-set-variable]
syncflash.c: In function 'SF_PrechargeAll':
syncflash.c:96:6: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]
mx1ads.c: In function 'board_early_init_f':
mx1ads.c:83:24: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]
syncflash.c: In function 'SF_Erase':
syncflash.c:112:6: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]
syncflash.c: In function 'flash_init':
syncflash.c:155:6: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 board/mx1ads/syncflash.c |   20 +++++++++-----------
 1 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c
index 7331efa..61a882e 100644
--- a/board/mx1ads/syncflash.c
+++ b/board/mx1ads/syncflash.c
@@ -57,7 +57,7 @@ flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips
 
 /* Get Status register			*/
 u32 SF_SR(void) {
-	u32 tmp,tmp1;
+	u32 tmp;
 
 	reg_SFCTL	= CMD_PROGRAM;
 	tmp		= __REG(CONFIG_SYS_FLASH_BASE);
@@ -65,7 +65,7 @@ u32 SF_SR(void) {
 	reg_SFCTL	= CMD_NORMAL;
 
 	reg_SFCTL	= CMD_LCR;			/* Activate LCR Mode		*/
-	tmp1		= __REG(CONFIG_SYS_FLASH_BASE + LCR_SR_CLEAR);
+	__REG(CONFIG_SYS_FLASH_BASE + LCR_SR_CLEAR);
 
 	return tmp;
 }
@@ -93,10 +93,10 @@ u8 SF_Ready(void) {
 /* Issue the precharge all command		*/
 void SF_PrechargeAll(void) {
 
-	u32 tmp;
-
-	reg_SFCTL	= CMD_PREC;			/* Set Precharge Command	*/
-	tmp		= __REG(CONFIG_SYS_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */
+	/* Set Precharge Command	*/
+	reg_SFCTL	= CMD_PREC;
+	/* Issue Precharge All Command */
+	__REG(CONFIG_SYS_FLASH_BASE + SYNCFLASH_A10);
 }
 
 /* set SyncFlash to normal mode			*/
@@ -109,13 +109,12 @@ void SF_Normal(void) {
 
 /* Erase SyncFlash				*/
 void SF_Erase(u32 RowAddress) {
-	u32 tmp;
 
 	reg_SFCTL	= CMD_NORMAL;
-	tmp		= __REG(RowAddress);
+	__REG(RowAddress);
 
 	reg_SFCTL	= CMD_PREC;
-	tmp		= __REG(RowAddress);
+	__REG(RowAddress);
 
 	reg_SFCTL	= CMD_LCR;			/* Set LCR mode		*/
 	__REG(RowAddress + LCR_ERASE_CONFIRM)	= 0;	/* Issue Erase Setup Command	*/
@@ -152,7 +151,6 @@ void SF_NvmodeWrite(void) {
 
 ulong flash_init(void) {
 	int i, j;
-	u32 tmp;
 
 /* Turn on CSD1 for negating RESETSF of SyncFLash */
 
@@ -160,7 +158,7 @@ ulong flash_init(void) {
 	udelay(200);
 
 	reg_SFCTL	= CMD_LMR;		/* Set Load Mode Register Command	*/
-	tmp		= __REG(MODE_REG_VAL);	/* Issue Load Mode Register Command	*/
+	__REG(MODE_REG_VAL);	/* Issue Load Mode Register Command	*/
 
 	SF_Normal();
 
-- 
1.7.5.4

[U-Boot] [PATCH 09/10] board/mx1ads/mx1ads.c: Fix GCC 4.6 warning

[Anatolij Gustschin]

Fix:
mx1ads.c: In function 'board_early_init_f':
mx1ads.c:83:24: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 board/mx1ads/mx1ads.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c
index 86b49fb..da9e21d 100644
--- a/board/mx1ads/mx1ads.c
+++ b/board/mx1ads/mx1ads.c
@@ -27,6 +27,7 @@
 #include <netdev.h>
 /*#include <mc9328.h>*/
 #include <asm/arch/imx-regs.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -80,8 +81,6 @@ static u32 mc9328sid;
 
 int board_early_init_f(void)
 {
-	volatile unsigned int tmp;
-
 	mc9328sid = SIDR;
 
 	GPCR = 0x000003AB;	/* I/O pad driving strength     */
@@ -107,8 +106,8 @@ int board_early_init_f(void)
 	GIUS (0) &= 0xFF3FFFFF;
 	GPR (0) &= 0xFF3FFFFF;
 
-	tmp = *(unsigned int *) (0x1500000C);
-	tmp = *(unsigned int *) (0x1500000C);
+	readl(0x1500000C);
+	readl(0x1500000C);
 
 	SetAsynchMode ();
 
-- 
1.7.5.4

[U-Boot] [PATCH 10/10] common/cmd_bootm.c: Fix GCC 4.6 warnings

[Anatolij Gustschin]

Fix:
cmd_bootm.c: In function 'bootm_load_os':
cmd_bootm.c:315:7: warning: unused variable 'unc_len'
[-Wunused-variable]

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
 common/cmd_bootm.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index d301332..b073f09 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -36,6 +36,7 @@
 #include <lmb.h>
 #include <linux/ctype.h>
 #include <asm/byteorder.h>
+#include <linux/compiler.h>
 
 #if defined(CONFIG_CMD_USB)
 #include <usb.h>
@@ -312,7 +313,7 @@ static int bootm_load_os(image_info_t os, ulong *load_end, int boot_progress)
 	ulong blob_end = os.end;
 	ulong image_start = os.image_start;
 	ulong image_len = os.image_len;
-	uint unc_len = CONFIG_SYS_BOOTM_LEN;
+	__maybe_unused uint unc_len = CONFIG_SYS_BOOTM_LEN;
 #if defined(CONFIG_LZMA) || defined(CONFIG_LZO)
 	int ret;
 #endif /* defined(CONFIG_LZMA) || defined(CONFIG_LZO) */
-- 
1.7.5.4

[U-Boot] [PATCH 01/10] drivers/usb/musb/musb_hcd.c: Fix GCC 4.6 warning

[Heiko Schocher]

Hello Anatolij,

Anatolij Gustschin wrote:
> Fix:
> musb_hcd.c: In function 'submit_control_msg':
> musb_hcd.c:851:6: warning: variable 'csr' set but not used
> [-Wunused-but-set-variable]
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  drivers/usb/musb/musb_hcd.c |    3 +--
>  1 files changed, 1 insertions(+), 2 deletions(-)

Applied to u-boot-staging hs at denx.de

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH 02/10] drivers/mtd/onenand/samsung.c: Fix GCC 4.6 warning

[Heiko Schocher]

Hello Anatolij,

Anatolij Gustschin wrote:
> Fix:
> samsung.c: In function 's3c_onenand_check_lock_status':
> samsung.c:486:6: warning: variable 'tmp' set but not used
> [-Wunused-but-set-variable]
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  drivers/mtd/onenand/samsung.c |    3 +--
>  1 files changed, 1 insertions(+), 2 deletions(-)

Applied to u-boot-staging hs at denx.de

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH 03/10] board/ronetix/pm9263/pm9263.c: Fix GCC 4.6 warning

[Heiko Schocher]

Hello Anatolij,

Anatolij Gustschin wrote:
> Fix:
> pm9263.c: In function 'pm9263_lcd_hw_psram_init':
> pm9263.c:167:20: warning: variable 'x' set but not used
> [-Wunused-but-set-variable]
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  board/ronetix/pm9263/pm9263.c |   13 ++++++-------
>  1 files changed, 6 insertions(+), 7 deletions(-)

Applied to u-boot-staging hs at denx.de

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH 04/10] drivers/net/lan91c96.c: Fix GCC 4.6 warning

[Heiko Schocher]

Hello Anatolij,

Anatolij Gustschin wrote:
> Fix:
> lan91c96.c: In function 'dump_memory_info':
> lan91c96.c:157:7: warning: variable 'mem_info' set but not used
> [-Wunused-but-set-variable]
> lan91c96.c: In function 'smc_send_packet':
> lan91c96.c:320:16: warning: variable 'ioaddr' set but not used
> [-Wunused-but-set-variable]
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  drivers/net/lan91c96.c |    7 ++-----
>  1 files changed, 2 insertions(+), 5 deletions(-)

Applied to u-boot-staging hs at denx.de

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH 05/10] arch/arm/cpu/arm926ejs/omap/cpuinfo.c: Fix GCC 4.6 warnings

[Heiko Schocher]

Hello Anatolij,

Anatolij Gustschin wrote:
> Fix:
> cpuinfo.c: In function 'print_cpuinfo':
> cpuinfo.c:155:6: warning: variable 'system_serial_low' set but not used
> [-Wunused-but-set-variable]
> cpuinfo.c:154:6: warning: variable 'system_serial_high' set but not used
> [-Wunused-but-set-variable]
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  arch/arm/cpu/arm926ejs/omap/cpuinfo.c |    5 +++--
>  1 files changed, 3 insertions(+), 2 deletions(-)

Applied to u-boot-staging hs at denx.de

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH 06/10] drivers/net/cs8900.c: Fix GCC 4.6 warning

[Heiko Schocher]

Hello Anatolij,

Anatolij Gustschin wrote:
> Fix:
> cs8900.c: In function 'get_reg_init_bus':
> cs8900.c:69:14: warning: variable 'c' set but not used
> [-Wunused-but-set-variable]
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  drivers/net/cs8900.c |   11 +++++------
>  1 files changed, 5 insertions(+), 6 deletions(-)

Applied to u-boot-staging hs at denx.de

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH 07/10] board/lubbock/flash.c: Fix GCC 4.6 warnings

[Heiko Schocher]

Hello Anatolij,

Anatolij Gustschin wrote:
> Fix:
> flash.c: In function 'flash_erase':
> flash.c:223:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable]
> flash.c: In function 'write_data':
> flash.c:392:6: warning: variable 'flag' set but not used [-Wunused-but-set-variable]
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  board/lubbock/flash.c |    7 +++----
>  1 files changed, 3 insertions(+), 4 deletions(-)

Applied to u-boot-staging hs at denx.de

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH 08/10] board/mx1ads/syncflash.c: Fix GCC 4.6 warnings

[Heiko Schocher]

Hello Anatolij,

Anatolij Gustschin wrote:
> Fix:
> syncflash.c: In function 'SF_SR':
> syncflash.c:60:10: warning: variable 'tmp1' set but not used
> [-Wunused-but-set-variable]
> syncflash.c: In function 'SF_PrechargeAll':
> syncflash.c:96:6: warning: variable 'tmp' set but not used
> [-Wunused-but-set-variable]
> mx1ads.c: In function 'board_early_init_f':
> mx1ads.c:83:24: warning: variable 'tmp' set but not used
> [-Wunused-but-set-variable]
> syncflash.c: In function 'SF_Erase':
> syncflash.c:112:6: warning: variable 'tmp' set but not used
> [-Wunused-but-set-variable]
> syncflash.c: In function 'flash_init':
> syncflash.c:155:6: warning: variable 'tmp' set but not used
> [-Wunused-but-set-variable]
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  board/mx1ads/syncflash.c |   20 +++++++++-----------
>  1 files changed, 9 insertions(+), 11 deletions(-)

Applied to u-boot-staging hs at denx.de

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH 09/10] board/mx1ads/mx1ads.c: Fix GCC 4.6 warning

[Heiko Schocher]

Hello Anatolij,

Anatolij Gustschin wrote:
> Fix:
> mx1ads.c: In function 'board_early_init_f':
> mx1ads.c:83:24: warning: variable 'tmp' set but not used
> [-Wunused-but-set-variable]
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  board/mx1ads/mx1ads.c |    7 +++----
>  1 files changed, 3 insertions(+), 4 deletions(-)

Applied to u-boot-staging hs at denx.de

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH 10/10] common/cmd_bootm.c: Fix GCC 4.6 warnings

[Heiko Schocher]

Hello Anatolij,

Anatolij Gustschin wrote:
> Fix:
> cmd_bootm.c: In function 'bootm_load_os':
> cmd_bootm.c:315:7: warning: unused variable 'unc_len'
> [-Wunused-variable]
> 
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
>  common/cmd_bootm.c |    3 ++-
>  1 files changed, 2 insertions(+), 1 deletions(-)

Applied to u-boot-staging hs at denx.de

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany