From: Ilya Yanok <yanok@emcraft.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3 00/13] Support for HTKW mcx board
Date: Tue, 29 Nov 2011 11:39:30 +0400 [thread overview]
Message-ID: <4ED48C32.4070509@emcraft.com> (raw)
In-Reply-To: <4ED489F2.7090704@compulab.co.il>
Hi Igor,
On 29.11.2011 11:29, Igor Grinberg wrote:
>> these patches introduce support for HTKW mcx board (AM3517-based)
>> including DaVinci EMAC driver fixes to work on AM35xx, SPL fixes
>> and OMAP3 EHCI support.
>>
>> This is an updated version of previously posted patches:
>> http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/116535
>>
>> Patches are rebased on the current master and no-op implementation
>> for dcache operations on arm926ejs added.
>
> Please, add version history, next time, so it can be easily
Ok.
> understood, what has been fixed and what hasn't been fixed.
> It makes a review of the new version much easier.
Actually I've addressed all comments during previous round. The only
difference from V2 is added no-op cache functions for arm926ejs.
> Also, if you use '--cover-letter' with git format-patch, you also get
> a nice diff stat, which can help identify, what files are involved.
Will do.
Thanks.
Regards, Ilya.
next prev parent reply other threads:[~2011-11-29 7:39 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-28 16:37 [U-Boot] [PATCH V3 00/13] Support for HTKW mcx board Ilya Yanok
2011-11-28 16:37 ` [U-Boot] [PATCH 01/13] davinci_emac: move arch-independent defines to separate header Ilya Yanok
2011-11-29 18:57 ` Tom Rini
2011-11-30 7:35 ` Igor Grinberg
2011-11-30 14:21 ` Tom Rini
2011-11-30 15:16 ` Igor Grinberg
2011-11-30 15:27 ` Tom Rini
2011-11-30 7:42 ` Igor Grinberg
2011-12-07 23:48 ` Ilya Yanok
2011-12-08 14:33 ` Igor Grinberg
2011-12-08 14:42 ` Tom Rini
2011-12-08 15:13 ` Igor Grinberg
2011-11-28 16:37 ` [U-Boot] [PATCH 02/13] davinci_emac: use internal addresses in buffer descriptors Ilya Yanok
2011-11-28 16:37 ` [U-Boot] [PATCH 03/13] davinci_emac: conditionally compile specific PHY support Ilya Yanok
2011-11-28 16:37 ` [U-Boot] [PATCH 04/13] arm926ejs: add noop implementation for dcache ops Ilya Yanok
2011-11-28 16:37 ` [U-Boot] [PATCH 05/13] davinci_emac: fix for running with dcache enabled Ilya Yanok
2011-11-28 16:37 ` [U-Boot] [PATCH 06/13] davinci_emac: hardcode 100Mbps for AM35xx and RMII Ilya Yanok
2011-11-28 16:37 ` [U-Boot] [PATCH 07/13] AM35xx: add EMAC support Ilya Yanok
2011-11-28 16:37 ` [U-Boot] [PATCH 08/13] AM3517: move AM3517 specific mux defines to generic header Ilya Yanok
2011-11-28 16:37 ` [U-Boot] [PATCH 09/13] nand_spl_simple: add support for software ECC Ilya Yanok
2011-11-29 18:42 ` Scott Wood
2011-11-28 16:37 ` [U-Boot] [PATCH 10/13] omap_gpmc: use SOFTECC in SPL if it's enabled Ilya Yanok
2011-11-29 18:43 ` Scott Wood
2011-11-28 16:37 ` [U-Boot] [PATCH 11/13] nand_spl_simple: store temp data at CONFIG_SPL_NAND_WORKSPACE Ilya Yanok
2011-11-29 18:43 ` Scott Wood
2011-11-30 8:06 ` Igor Grinberg
2011-12-07 9:06 ` Stefano Babic
2011-12-07 17:46 ` Ilya Yanok
2011-12-07 18:18 ` Scott Wood
2011-12-07 18:45 ` Wolfgang Denk
2011-12-07 19:05 ` Ilya Yanok
2011-12-07 19:07 ` Stefano Babic
2011-11-28 16:37 ` [U-Boot] [PATCH 12/13] ehci-omap: driver for EHCI host on OMAP3 Ilya Yanok
2011-11-28 16:37 ` [U-Boot] [PATCH 13/13] mcx: support for HTKW mcx board Ilya Yanok
2011-11-29 18:54 ` Tom Rini
2011-11-30 13:49 ` Andy Fleming
2011-11-30 14:24 ` Tom Rini
2011-11-30 18:41 ` Wolfgang Denk
2011-11-30 8:21 ` Igor Grinberg
2011-12-12 15:39 ` Ilya Yanok
2011-12-12 16:22 ` Tom Rini
2011-12-13 19:18 ` Ilya Yanok
2011-12-14 22:40 ` Tom Rini
2011-11-29 7:29 ` [U-Boot] [PATCH V3 00/13] Support " Igor Grinberg
2011-11-29 7:39 ` Ilya Yanok [this message]
2011-11-29 7:54 ` Igor Grinberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ED48C32.4070509@emcraft.com \
--to=yanok@emcraft.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox