[U-Boot] [PATCH] devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss

[Aneesh V <aneesh@ti.com>]

Hi Igor,

On Thursday 01 December 2011 03:33 PM, Igor Grinberg wrote:
> On 12/01/11 11:07, Simon Schwarz wrote:
>> Hi Igor,
>>
>> this only affects Boards with SPL support - and only devkit8000.
>>
>> The SPL has its .bss section in SD-RAM while the rest is in SRAM -
>> CONFIG_SYS_TEXT_BASE was in the same area as .bss. This caused trouble
>> as the header of the u-boot.img was written before
>> CONFIG_SYS_TEXT_BASE. In the described case this messed with the
>> pointer to the mcc datastructure - therefore the u-boot.img file
>> failed to be read.
>
> Thank you very much for the explanation.
>
> So as to my understanding, what happens is:
> 1) The SPL initializes the SDRAM
> 2) Copies its .bss section to SDRAM
> 3) Starts loading the U-Boot image and overwrites the .bss section
> Is the above correct?
>
> If it is, then why do we need the .bss in SDRAM?

U-Boot FAT implementation uses 3 buffers each of size 64 KB.

> Aren't there enough space in SRAM?

SRAM doesn't have space for such huge buffers.

> Also, is this what X-Loader did in first place?

Yes, x-loader had these buffers in SDRAM too. But instead of putting
the .bss in SDRAM, x-loader made these huge arrays into pointer
variables that were then made to point to the SDRAM.

br,
Aneesh