[U-Boot] [STATUS] Getting ready for -rc1

[U-Boot] [STATUS] Getting ready for -rc1

[Wolfgang Denk]

Hi all,

first I would like to thank everybody who helped me to reduce the
backlog of patches and pushed stuff through the u-boot-staging repo:
thanks: Anatolij, Heiko, Marek, Stefan, and Stefano.

Hm... nobody outside DENX in this list :-(


Second, I would like to get ready for the -rc1 pre-release.
I'll wait for the next ARM pull request from Albert, and then I will
push -rc1 out.

If anybody has any unmerged patches pending that are supposed to go
in, please speak up now.


Thanks.

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Always borrow money from a pessimist; they don't expect  to  be  paid
back.

[U-Boot] [STATUS] Getting ready for -rc1

[Graeme Russ]

Hi Wolfgang,

On 06/12/11 22:12, Wolfgang Denk wrote:
> Hi all,
> 
> first I would like to thank everybody who helped me to reduce the
> backlog of patches and pushed stuff through the u-boot-staging repo:
> thanks: Anatolij, Heiko, Marek, Stefan, and Stefano.
> 
> Hm... nobody outside DENX in this list :-(

I would have liked to have helped, but I've been flat out at home and
barely able to get x86 ready for -rc1. I am glad to see that it looks like
a workable solution :)

> Second, I would like to get ready for the -rc1 pre-release.
> I'll wait for the next ARM pull request from Albert, and then I will
> push -rc1 out.
> 
> If anybody has any unmerged patches pending that are supposed to go
> in, please speak up now.

There is http://patchwork.ozlabs.org/patch/128356/ but apparently there is
another fix for this in the ARM tree somewhere - Albert, can you please
confirm? If so, x86 is ready to roll

Regards,

Graeme

[U-Boot] [STATUS] Getting ready for -rc1

[Graeme Russ]

Hi Wolfgang,

On Tue, Dec 6, 2011 at 10:44 PM, Graeme Russ <graeme.russ@gmail.com> wrote:
> Hi Wolfgang,
>
> On 06/12/11 22:12, Wolfgang Denk wrote:
>> Hi all,
>>
>> first I would like to thank everybody who helped me to reduce the
>> backlog of patches and pushed stuff through the u-boot-staging repo:
>> thanks: Anatolij, Heiko, Marek, Stefan, and Stefano.
>>
>> Hm... nobody outside DENX in this list :-(
>
> I would have liked to have helped, but I've been flat out at home and
> barely able to get x86 ready for -rc1. I am glad to see that it looks like
> a workable solution :)
>
>> Second, I would like to get ready for the -rc1 pre-release.
>> I'll wait for the next ARM pull request from Albert, and then I will
>> push -rc1 out.
>>
>> If anybody has any unmerged patches pending that are supposed to go
>> in, please speak up now.
>
> There is http://patchwork.ozlabs.org/patch/128356/ but apparently there is
> another fix for this in the ARM tree somewhere - Albert, can you please
> confirm? If so, x86 is ready to roll

An equivalent fix is now in u-boot/master

Regards,

Graeme

[U-Boot] [STATUS] Getting ready for -rc1

[Albert ARIBAUD]

Hi Graeme,

Le 06/12/2011 12:44, Graeme Russ a ?crit :
> Hi Wolfgang,
>
> On 06/12/11 22:12, Wolfgang Denk wrote:
>> Hi all,
>>
>> first I would like to thank everybody who helped me to reduce the
>> backlog of patches and pushed stuff through the u-boot-staging repo:
>> thanks: Anatolij, Heiko, Marek, Stefan, and Stefano.
>>
>> Hm... nobody outside DENX in this list :-(
>
> I would have liked to have helped, but I've been flat out at home and
> barely able to get x86 ready for -rc1. I am glad to see that it looks like
> a workable solution :)
>
>> Second, I would like to get ready for the -rc1 pre-release.
>> I'll wait for the next ARM pull request from Albert, and then I will
>> push -rc1 out.
>>
>> If anybody has any unmerged patches pending that are supposed to go
>> in, please speak up now.
>
> There is http://patchwork.ozlabs.org/patch/128356/ but apparently there is
> another fix for this in the ARM tree somewhere - Albert, can you please
> confirm? If so, x86 is ready to roll

Confirm: patch from Sanjeev Premi, dated 2011-11-16, "part_efi: fix 
compile errors", currently in u-boot-arm/master. Once I pull in whatever 
I can tonight, I'll send the pull request to Wolfgang and the patch will 
be there.

> Regards,
>
> Graeme

Amicalement,
-- 
Albert.

[U-Boot] [STATUS] Getting ready for -rc1

[Graeme Russ]

Hi Albert,

On Wed, Dec 7, 2011 at 8:28 AM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Hi Graeme,
>
> Le 06/12/2011 12:44, Graeme Russ a ?crit :
>
>> Hi Wolfgang,
>>
>> On 06/12/11 22:12, Wolfgang Denk wrote:
>>>
>>> Hi all,
>>>
>>> first I would like to thank everybody who helped me to reduce the
>>> backlog of patches and pushed stuff through the u-boot-staging repo:
>>> thanks: Anatolij, Heiko, Marek, Stefan, and Stefano.
>>>
>>> Hm... nobody outside DENX in this list :-(
>>
>>
>> I would have liked to have helped, but I've been flat out at home and
>> barely able to get x86 ready for -rc1. I am glad to see that it looks like
>> a workable solution :)
>>
>>> Second, I would like to get ready for the -rc1 pre-release.
>>> I'll wait for the next ARM pull request from Albert, and then I will
>>> push -rc1 out.
>>>
>>> If anybody has any unmerged patches pending that are supposed to go
>>> in, please speak up now.
>>
>>
>> There is http://patchwork.ozlabs.org/patch/128356/ but apparently there is
>> another fix for this in the ARM tree somewhere - Albert, can you please
>> confirm? If so, x86 is ready to roll
>
>
> Confirm: patch from Sanjeev Premi, dated 2011-11-16, "part_efi: fix compile
> errors", currently in u-boot-arm/master. Once I pull in whatever I can
> tonight, I'll send the pull request to Wolfgang and the patch will be there.

Eep, this collides with commit
4715a81136049167160230efd28eb9d48eeded1f in u-boot/master. The one in
u-boot-arm/master is a superset of the one in u-boot/master

Regards,

Graeme

[U-Boot] [STATUS] Getting ready for -rc1

[Albert ARIBAUD]

Le 06/12/2011 22:33, Graeme Russ a ?crit :
> Hi Albert,
>
> On Wed, Dec 7, 2011 at 8:28 AM, Albert ARIBAUD
> <albert.u.boot@aribaud.net>  wrote:
>> Hi Graeme,
>>
>> Le 06/12/2011 12:44, Graeme Russ a ?crit :
>>
>>> Hi Wolfgang,
>>>
>>> On 06/12/11 22:12, Wolfgang Denk wrote:
>>>>
>>>> Hi all,
>>>>
>>>> first I would like to thank everybody who helped me to reduce the
>>>> backlog of patches and pushed stuff through the u-boot-staging repo:
>>>> thanks: Anatolij, Heiko, Marek, Stefan, and Stefano.
>>>>
>>>> Hm... nobody outside DENX in this list :-(
>>>
>>>
>>> I would have liked to have helped, but I've been flat out at home and
>>> barely able to get x86 ready for -rc1. I am glad to see that it looks like
>>> a workable solution :)
>>>
>>>> Second, I would like to get ready for the -rc1 pre-release.
>>>> I'll wait for the next ARM pull request from Albert, and then I will
>>>> push -rc1 out.
>>>>
>>>> If anybody has any unmerged patches pending that are supposed to go
>>>> in, please speak up now.
>>>
>>>
>>> There is http://patchwork.ozlabs.org/patch/128356/ but apparently there is
>>> another fix for this in the ARM tree somewhere - Albert, can you please
>>> confirm? If so, x86 is ready to roll
>>
>>
>> Confirm: patch from Sanjeev Premi, dated 2011-11-16, "part_efi: fix compile
>> errors", currently in u-boot-arm/master. Once I pull in whatever I can
>> tonight, I'll send the pull request to Wolfgang and the patch will be there.
>
> Eep, this collides with commit
> 4715a81136049167160230efd28eb9d48eeded1f in u-boot/master. The one in
> u-boot-arm/master is a superset of the one in u-boot/master

Then when I rebase the ARM tree onto the mailine one, a merge conflict 
should arise and I will then merge the commits together as part of the 
rebase. That OK?

> Regards,
>
> Graeme

Amicalement,
-- 
Albert.

[U-Boot] [STATUS] Getting ready for -rc1

[Igor Grinberg]

Hi Wolfgang,

On 12/06/11 13:12, Wolfgang Denk wrote:
> Hi all,
> 
> first I would like to thank everybody who helped me to reduce the
> backlog of patches and pushed stuff through the u-boot-staging repo:
> thanks: Anatolij, Heiko, Marek, Stefan, and Stefano.
> 
> Hm... nobody outside DENX in this list :-(
> 
> 
> Second, I would like to get ready for the -rc1 pre-release.
> I'll wait for the next ARM pull request from Albert, and then I will
> push -rc1 out.
> 
> If anybody has any unmerged patches pending that are supposed to go
> in, please speak up now.

How about this one:
http://patchwork.ozlabs.org/patch/127934/

Of course it can be merged during the rc cycle,
but it is a compile fix, so sooner is better, right?


-- 
Regards,
Igor.

[U-Boot] [STATUS] Getting ready for -rc1

[Vladimir Zapolskiy]

Hi Wolfgang,

On 06.12.2011 13:12, Wolfgang Denk wrote:
> Hi all,
>
> first I would like to thank everybody who helped me to reduce the
> backlog of patches and pushed stuff through the u-boot-staging repo:
> thanks: Anatolij, Heiko, Marek, Stefan, and Stefano.
>
> Hm... nobody outside DENX in this list :-(
>
>
> Second, I would like to get ready for the -rc1 pre-release.
> I'll wait for the next ARM pull request from Albert, and then I will
> push -rc1 out.
>
> If anybody has any unmerged patches pending that are supposed to go
> in, please speak up now.
>

would it be possible to upmerge my realisation for NXP LPC32XX support 
and DevKit3250 board during the merge window?

I hope there is no stoppers for that.

-- 
With best wishes,
Vladimir

[U-Boot] [STATUS] Getting ready for -rc1

[Wolfgang Denk]

Dear Vladimir Zapolskiy,

In message <4EDE1729.9040807@mleia.com> (sfid-20111206_132335_868182_7BD58FAF) you wrote:
> 
> would it be possible to upmerge my realisation for NXP LPC32XX support 
> and DevKit3250 board during the merge window?

You should not ask me, but the responsible custodian.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Wenn Du ein' weise Antwort verlangst, Mu?t Du vern?nftig fragen.
                                                -- Goethe, Invektiven

[U-Boot] [STATUS] Getting ready for -rc1

[Vladimir Zapolskiy]

Hi Wolfgang,

On 06.12.2011 15:35, Wolfgang Denk wrote:
> Dear Vladimir Zapolskiy,
>
> In message<4EDE1729.9040807@mleia.com>  (sfid-20111206_132335_868182_7BD58FAF) you wrote:
>>
>> would it be possible to upmerge my realisation for NXP LPC32XX support
>> and DevKit3250 board during the merge window?
>
> You should not ask me, but the responsible custodian.

please excuse me, but sometimes I have to ask you, often you're the last 
resort in getting feedback relatively to my crap.

-- 
With best wishes,
Vladimir

[U-Boot] [STATUS] Getting ready for -rc1

[Wolfgang Denk]

Dear Vladimir,

In message <4EDE21C1.6010809@mleia.com> (sfid-20111206_140838_823869_D329B307) you wrote:
> 
> > You should not ask me, but the responsible custodian.
> 
> please excuse me, but sometimes I have to ask you, often you're the last 
> resort in getting feedback relatively to my crap.

Don't take my words literally, please ;-)

But for ARM boards I really tend to just wait for a pull request from
Albert.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Research is what I'm doing when I don't know what I'm doing.
                                                 -- Wernher von Braun

[U-Boot] [STATUS] Getting ready for -rc1

[Albert ARIBAUD]

Le 06/12/2011 16:17, Wolfgang Denk a ?crit :
> Dear Vladimir,
>
> In message<4EDE21C1.6010809@mleia.com>  (sfid-20111206_140838_823869_D329B307) you wrote:
>>
>>> You should not ask me, but the responsible custodian.
>>
>> please excuse me, but sometimes I have to ask you, often you're the last
>> resort in getting feedback relatively to my crap.
>
> Don't take my words literally, please ;-)
>
> But for ARM boards I really tend to just wait for a pull request from
> Albert.

(is my old free.fr email address still lingering somewhere?)

Vladimir,

If I am not mistaken, these are not bug fixes, and were submitted after 
the merge window was closed. Unless Wolfgang agrees that I let them in 
now, they should wait until next merge window.

> Best regards,
>
> Wolfgang Denk

Amicalement,
-- 
Albert.

[U-Boot] [STATUS] Getting ready for -rc1

[Wolfgang Denk]

Dear Albert,

In message <4EDE8D2A.6000105@aribaud.net> you wrote:
>
> (is my old free.fr email address still lingering somewhere?)

Sorry - it was in my alias file.  Fixed now.

> If I am not mistaken, these are not bug fixes, and were submitted after 
> the merge window was closed. Unless Wolfgang agrees that I let them in 
> now, they should wait until next merge window.

I see it as you: this is new stuff that should go through next.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Anyone who doesn't believe in miracles is not a realist.
                                                   - David Ben Gurion

[U-Boot] [STATUS] Getting ready for -rc1

[Vladimir Zapolskiy]

Hi Albert,

thank you for response.

On 06.12.2011 23:46, Albert ARIBAUD wrote:
> Le 06/12/2011 16:17, Wolfgang Denk a ?crit :
>> Dear Vladimir,
>>
>> In message<4EDE21C1.6010809@mleia.com>
>> (sfid-20111206_140838_823869_D329B307) you wrote:
>>>
>>>> You should not ask me, but the responsible custodian.
>>>
>>> please excuse me, but sometimes I have to ask you, often you're the last
>>> resort in getting feedback relatively to my crap.
>>
>> Don't take my words literally, please ;-)
>>
>> But for ARM boards I really tend to just wait for a pull request from
>> Albert.
>
> (is my old free.fr email address still lingering somewhere?)
>
> Vladimir,
>
> If I am not mistaken, these are not bug fixes, and were submitted after
> the merge window was closed. Unless Wolfgang agrees that I let them in
> now, they should wait until next merge window.

Surely I don't insist in inclusion of the SoC support into this release, 
but I have a hope to get it in the next, and the next merge window start 
is expected to be on the next week or so, if I'm not mistaken.

I rebased the changes a couple of times upon u-boot-arm/next, I thought 
that this branch is dedicated for the next merge window changes, but my 
change still haven't been pushed into it, that's why I feel worried 
about them and their inclusion during the next merge window.

I just would be glad to get awared eventually that from your ARM 
custodian perspective the proposed change is ok for U-boot.

-- 
With best wishes,
Vladimir

[U-Boot] [STATUS] Getting ready for -rc1

[Albert ARIBAUD]

Le 06/12/2011 22:56, Vladimir Zapolskiy a ?crit :

> Surely I don't insist in inclusion of the SoC support into this release,
> but I have a hope to get it in the next, and the next merge window start
> is expected to be on the next week or so, if I'm not mistaken.
>
> I rebased the changes a couple of times upon u-boot-arm/next, I thought
> that this branch is dedicated for the next merge window changes, but my
> change still haven't been pushed into it, that's why I feel worried
> about them and their inclusion during the next merge window.
>
> I just would be glad to get awared eventually that from your ARM
> custodian perspective the proposed change is ok for U-boot.

I will let you know ASAP -- right now I am focusing on what's going into 
master for RC, but when this is done, I'll get back to your patches and 
apply them to next or let you know whatever changes would be needed. If 
they get onto next, then on dec 12, after the release is out and tagged, 
ARM/next will move to ARM/master and I'll send a pull request for it.

Amicalement,
-- 
Albert.

[U-Boot] [STATUS] Getting ready for -rc1

[Vladimir Zapolskiy]

On 07.12.2011 00:15, Albert ARIBAUD wrote:
> Le 06/12/2011 22:56, Vladimir Zapolskiy a ?crit :
>
>> Surely I don't insist in inclusion of the SoC support into this release,
>> but I have a hope to get it in the next, and the next merge window start
>> is expected to be on the next week or so, if I'm not mistaken.
>>
>> I rebased the changes a couple of times upon u-boot-arm/next, I thought
>> that this branch is dedicated for the next merge window changes, but my
>> change still haven't been pushed into it, that's why I feel worried
>> about them and their inclusion during the next merge window.
>>
>> I just would be glad to get awared eventually that from your ARM
>> custodian perspective the proposed change is ok for U-boot.
>
> I will let you know ASAP -- right now I am focusing on what's going into
> master for RC, but when this is done, I'll get back to your patches and
> apply them to next or let you know whatever changes would be needed. If
> they get onto next, then on dec 12, after the release is out and tagged,
> ARM/next will move to ARM/master and I'll send a pull request for it.
>
Glad to hear that, thank you.

-- 
With best wishes,
Vladimir

[U-Boot] [STATUS] Getting ready for -rc1

[Jason Hobbs]

On Tue, Dec 06, 2011 at 06:12:22AM -0500, Wolfgang Denk wrote:
> Second, I would like to get ready for the -rc1 pre-release.  I'll wait
> for the next ARM pull request from Albert, and then I will push -rc1
> out.
> 
> If anybody has any unmerged patches pending that are supposed to go
> in, please speak up now.

Not sure what qualifies as "supposed to go on", but I'd like this bug
fix patch I submitted in earlier November and got no comments on to get
in.

http://patchwork.ozlabs.org/patch/124071/

Thanks,

Jason

[U-Boot] [STATUS] Getting ready for -rc1

[Simon Glass]

Hi Wolfgang,

On Tue, Dec 6, 2011 at 3:12 AM, Wolfgang Denk <wd@denx.de> wrote:
> Hi all,
>
> first I would like to thank everybody who helped me to reduce the
> backlog of patches and pushed stuff through the u-boot-staging repo:
> thanks: Anatolij, Heiko, Marek, Stefan, and Stefano.
>
> Hm... nobody outside DENX in this list :-(
>
>
> Second, I would like to get ready for the -rc1 pre-release.
> I'll wait for the next ARM pull request from Albert, and then I will
> push -rc1 out.
>
> If anybody has any unmerged patches pending that are supposed to go
> in, please speak up now.

Vadim's TPM patch 1/2:

http://patchwork.ozlabs.org/patch/120282/

[U-Boot] [STATUS] Getting ready for -rc1

[Macpaul Lin]

Hi Mike,

2011/12/6 Wolfgang Denk <wd@denx.de>

> Hi all,
>
> Second, I would like to get ready for the -rc1 pre-release.
> I'll wait for the next ARM pull request from Albert, and then I will
> push -rc1 out.
>
> If anybody has any unmerged patches pending that are supposed to go
> in, please speak up now.
>
>
Would you please test linkage.h related change before rc2?
I guess we cannot done this before rc1 is out.
If we can done this before rc2, then other people could
be able to refine their code if they want just after the official release.

Thanks. :)

Best regards,
Macpaul Lin

[U-Boot] [STATUS] Getting ready for -rc1

[Andreas Bießmann]

Dear Wolfgang,

(resent from registered account cause u-boot list seems to be members
only now ...)

Am 06.12.2011 12:12, schrieb Wolfgang Denk:
> Hi all,

> Second, I would like to get ready for the -rc1 pre-release.
> I'll wait for the next ARM pull request from Albert, and then I will
> push -rc1 out.
> 
> If anybody has any unmerged patches pending that are supposed to go
> in, please speak up now.

These are waiting for merge:
 * http://patchwork.ozlabs.org/patch/117688/ (unbreak avr32 arch)
 * http://patchwork.ozlabs.org/patch/120993/ (new mmc framework for
   avr32, brake some board/mmc combinations)
 * http://patchwork.ozlabs.org/patch/119780/ (unbreak new mmc framework)
 * http://patchwork.ozlabs.org/patch/128931/

best regards

Andreas Bie?mann

[U-Boot] [STATUS] Getting ready for -rc1

[Wolfgang Denk]

Dear Andreas,

In message <4EDF3A70.8000805@gmail.com> you wrote:
> 
> (resent from registered account cause u-boot list seems to be members
> only now ...)

Moderated, yes.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Defaults are wonderful, just like fire.
                  - Larry Wall in <1996Mar6.004121.27890@netlabs.com>

[U-Boot] [STATUS] Getting ready for -rc1

[Wolfgang Denk]

Dear Andreas,

In message <4EDF3855.5010202@corscience.de> you wrote:
> 
> These are waiting for merge:
>  * http://patchwork.ozlabs.org/patch/117688/ (unbreak avr32 arch)
>  * http://patchwork.ozlabs.org/patch/120993/ (new mmc framework for
>    avr32, brake some board/mmc combinations)
>  * http://patchwork.ozlabs.org/patch/119780/ (unbreak new mmc framework)
>  * http://patchwork.ozlabs.org/patch/128931/

This is MMC stuff, so they go through Andy's tree.

Maybe you should put him on Cc: (done now).

Instead of adding broken stuff to fix it later you might want to
submit a new version of this stuff that sqashes the patches.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The number you have dialed is imaginary. Please divide by 0  and  try
again.

[U-Boot] [STATUS] Getting ready for -rc1

[Andreas Bießmann]

Dear Wolfgang,

Am 07.12.2011 11:25, schrieb Wolfgang Denk:
> Dear Andreas,
> 
> In message <4EDF3855.5010202@corscience.de> you wrote:
>>
>> These are waiting for merge:
>>  * http://patchwork.ozlabs.org/patch/117688/ (unbreak avr32 arch)
>>  * http://patchwork.ozlabs.org/patch/120993/ (new mmc framework for
>>    avr32, brake some board/mmc combinations)
>>  * http://patchwork.ozlabs.org/patch/119780/ (unbreak new mmc framework)
>>  * http://patchwork.ozlabs.org/patch/128931/
> 
> This is MMC stuff, so they go through Andy's tree.

Only two of them are MMC related.

> Maybe you should put him on Cc: (done now).
> 
> Instead of adding broken stuff to fix it later you might want to
> submit a new version of this stuff that sqashes the patches.

Well, only the "http://patchwork.ozlabs.org/patch/119780/ (unbreak new
mmc framework)" is from me. The 'new mmc framework for avr32' is from
Sven Schnelle and yes, we could merge these two together .. sven?

IMHO the most important patch is
http://patchwork.ozlabs.org/patch/117688/ which unbreaks the whole avr32
architecture.

best regards

Andreas Bie?mann

[U-Boot] [STATUS] Getting ready for -rc1

[Wolfgang Denk]

Dear Andreas,

In message <4EDF4521.6060901@gmail.com> you wrote:
> 
> IMHO the most important patch is
> http://patchwork.ozlabs.org/patch/117688/ which unbreaks the whole avr32
> architecture.

Was the AVR32 custodian on Cc: ?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
CONSUMER NOTICE:  Because  of  the  "Uncertainty  Principle,"  It  Is
Impossible  for  the  Consumer  to  Find  Out  at  the Same Time Both
Precisely Where This Product Is and How Fast It Is Moving.

[U-Boot] [STATUS] Getting ready for -rc1

[Andreas Bießmann]

Dear Wolfgang,

Am 07.12.2011 13:11, schrieb Wolfgang Denk:
> Dear Andreas,
> 
> In message <4EDF4521.6060901@gmail.com> you wrote:
>>
>> IMHO the most important patch is
>> http://patchwork.ozlabs.org/patch/117688/ which unbreaks the whole avr32
>> architecture.
> 
> Was the AVR32 custodian on Cc: ?

AFAIK Haavrad Skinnemoen does not work at atmel any longer and I think
he has nothing else to do with avr32 ...

Since then Reinhard took over as a 'atmel' custodian and yes, he was in CC.

best regards

Andreas Bie?mann

[U-Boot] [STATUS] Getting ready for -rc1

[Wolfgang Denk]

Dear Andreas,

In message <4EDF58C0.8090306@gmail.com> you wrote:
> > 
> > Was the AVR32 custodian on Cc: ?
> 
> AFAIK Haavrad Skinnemoen does not work at atmel any longer and I think

You are right, I have to update my mail aliases :-(

> Since then Reinhard took over as a 'atmel' custodian and yes, he was in CC.

OK.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There is a multi-legged creature crawling on your shoulder.
	-- Spock, "A Taste of Armageddon", stardate 3193.9

[U-Boot] [STATUS] Getting ready for -rc1

[Sven Schnelle]

Hi Andreas,

On 12/07/2011 02:51 AM, Andreas Bie?mann wrote:
> Dear Wolfgang,
>
> Am 07.12.2011 11:25, schrieb Wolfgang Denk:
>> Dear Andreas,
>> In message <4EDF3855.5010202@corscience.de> you wrote:
>> These are waiting for merge:
>>  * http://patchwork.ozlabs.org/patch/117688/ (unbreak avr32 arch)
>>  * http://patchwork.ozlabs.org/patch/120993/ (new mmc framework for
>>    avr32, brake some board/mmc combinations)
>>  * http://patchwork.ozlabs.org/patch/119780/ (unbreak new mmc framework)
>>  * http://patchwork.ozlabs.org/patch/128931/
>> This is MMC stuff, so they go through Andy's tree.
> Only two of them are MMC related.
>> Maybe you should put him on Cc: (done now).
>>
>> Instead of adding broken stuff to fix it later you might want to
>> submit a new version of this stuff that sqashes the patches.
> Well, only the "http://patchwork.ozlabs.org/patch/119780/ (unbreak new
> mmc framework)" is from me. The 'new mmc framework for avr32' is from
> Sven Schnelle and yes, we could merge these two together .. sven?

No  objections against merging those two patches together. Can you do
that for me, as i'm traveling
and have no access to all the AVR32 stuff for testing.


Thanks,

Sven.

[U-Boot] [STATUS] Getting ready for -rc1

[Andreas Bießmann]

Dear Sven,

Am 07.12.2011 14:20, schrieb Sven Schnelle:
> Hi Andreas,
> 
> On 12/07/2011 02:51 AM, Andreas Bie?mann wrote:
>> Dear Wolfgang,
>>
>> Am 07.12.2011 11:25, schrieb Wolfgang Denk:
>>> Dear Andreas,
>>> In message <4EDF3855.5010202@corscience.de> you wrote:
>>> These are waiting for merge:
>>>  * http://patchwork.ozlabs.org/patch/117688/ (unbreak avr32 arch)
>>>  * http://patchwork.ozlabs.org/patch/120993/ (new mmc framework for
>>>    avr32, brake some board/mmc combinations)
>>>  * http://patchwork.ozlabs.org/patch/119780/ (unbreak new mmc framework)
>>>  * http://patchwork.ozlabs.org/patch/128931/
>>> This is MMC stuff, so they go through Andy's tree.
>> Only two of them are MMC related.
>>> Maybe you should put him on Cc: (done now).
>>>
>>> Instead of adding broken stuff to fix it later you might want to
>>> submit a new version of this stuff that sqashes the patches.
>> Well, only the "http://patchwork.ozlabs.org/patch/119780/ (unbreak new
>> mmc framework)" is from me. The 'new mmc framework for avr32' is from
>> Sven Schnelle and yes, we could merge these two together .. sven?
> 
> No  objections against merging those two patches together. Can you do
> that for me, as i'm traveling
> and have no access to all the AVR32 stuff for testing.

I can do so, but not before Friday ... Andy should comment on
http://patchwork.ozlabs.org/patch/119780/ before doing the merge cause
this patch was an RFC ... will forward the patch to him and ask. IMHO
those two patches (120993 and 119780) are not a _must_ have for rc1 (or
this release at all), but they where posted before merge window closed
(and on my wish list).

best regards

Andreas Bie?mann

[U-Boot] [STATUS] Getting ready for -rc1

[Wolfgang Denk]

Hi everybody,

I would like to get our -rc1 within the next 2 days or so.

Please drop me (and the respective custodian) a note if you have any
patches that are supposed to go in.

Custodians: if there is unmerged stuff in your queues, then please
send your pull requests within the next few days.

Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Tell the truth and run."                          - Yugoslav proverb

[U-Boot] [STATUS] Getting ready for -rc1

[Andreas Pretzsch]

Am Montag, den 16.05.2011, 22:24 +0200 schrieb Wolfgang Denk:
> Hi everybody,
> 
> I would like to get our -rc1 within the next 2 days or so.
> 
> Please drop me (and the respective custodian) a note if you have any
> patches that are supposed to go in.

I'd like to request the inclusion of my patchset adding a command to
manually trigger an update from a FIT-image, see
  http://lists.denx.de/pipermail/u-boot/2011-April/090911.html
  http://lists.denx.de/pipermail/u-boot/2011-April/090912.html
  http://lists.denx.de/pipermail/u-boot/2011-April/090913.html
resp.
  http://patchwork.ozlabs.org/bundle/apr-cn-eng/fitupd/
  http://patchwork.ozlabs.org/patch/92055/
  http://patchwork.ozlabs.org/patch/92056/

I suppose Mr. Jerry Van Baren as the FDT custodian is the primary
contact, therefore I added him to CC. But maybe you could decide also.

Discussion leading to this feature was
  http://lists.denx.de/pipermail/u-boot/2011-April/090202.html
  http://lists.denx.de/pipermail/u-boot/2011-April/090210.html
  http://lists.denx.de/pipermail/u-boot/2011-April/090484.html
  http://lists.denx.de/pipermail/u-boot/2011-April/090914.html

Thanks in advance,
  Andreas

-- 

carpe noctem engineering
Ingenieurbuero fuer Hard- & Software-Entwicklung Andreas Pretzsch
Dipl.-Ing. (FH) Andreas Pretzsch          Tel. +49-(0)731-5521572
Hahnengasse 3                             Fax: +49-(0)731-5521573
89073 Ulm, Germany                        email: apr at cn-eng.de

[U-Boot] [STATUS] Getting ready for -rc1

[Jerry Van Baren]

Hi Andreas, Wolfgang,

On 05/17/2011 11:04 AM, Andreas Pretzsch wrote:
> Am Montag, den 16.05.2011, 22:24 +0200 schrieb Wolfgang Denk:
>> Hi everybody,
>>
>> I would like to get our -rc1 within the next 2 days or so.
>>
>> Please drop me (and the respective custodian) a note if you have any
>> patches that are supposed to go in.
>
> I'd like to request the inclusion of my patchset adding a command to
> manually trigger an update from a FIT-image, see
>    http://lists.denx.de/pipermail/u-boot/2011-April/090911.html
>    http://lists.denx.de/pipermail/u-boot/2011-April/090912.html
>    http://lists.denx.de/pipermail/u-boot/2011-April/090913.html
> resp.
>    http://patchwork.ozlabs.org/bundle/apr-cn-eng/fitupd/
>    http://patchwork.ozlabs.org/patch/92055/
>    http://patchwork.ozlabs.org/patch/92056/
>
> I suppose Mr. Jerry Van Baren as the FDT custodian is the primary
> contact, therefore I added him to CC. But maybe you could decide also.


This is a new command that uses the FDT utilities.  As such, I believe 
it is in Wolfgang's area.

[snip]

> Thanks in advance,
>    Andreas

Best regards,
gvb