From: LiuShuo <b35362@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 5/5] mtd/nand: workaround for Freescale FCM to support 4k pagesize Nand chip
Date: Fri, 9 Dec 2011 16:58:26 +0800 [thread overview]
Message-ID: <4EE1CDB2.6010102@freescale.com> (raw)
In-Reply-To: <201112090927.51821.marek.vasut@gmail.com>
? 2011?12?09? 16:27, Marek Vasut ??:
>> ? 2011?12?09? 00:37, Marek Vasut ??:
>>>> Freescale FCM controller has a 2K size limitation of buffer RAM. In
>>>> order to support the Nand flash chip whose page size is larger than 2K
>>>> bytes, we read/write 2k data repeatedly by issuing FIR_OP_RB/FIR_OP_WB
>>>> and save them to a large buffer.
>>>>
>>>> Signed-off-by: Shengzhou Liu<Shengzhou.Liu@freescale.com>
>>>> Signed-off-by: Liu Shuo<b35362@freescale.com>
>>>> ---
>>>>
>>>> drivers/mtd/nand/fsl_elbc_nand.c | 279
>>>>
>>>> +++++++++++++++++++++++++++++++++---- 1 files changed, 248
>>>> insertions(+), 31 deletions(-)
>>>>
>>>> diff --git a/drivers/mtd/nand/fsl_elbc_nand.c
>>>> b/drivers/mtd/nand/fsl_elbc_nand.c index 52362b1..3983c8c 100644
>>>> --- a/drivers/mtd/nand/fsl_elbc_nand.c
>>>> +++ b/drivers/mtd/nand/fsl_elbc_nand.c
>>>> @@ -64,7 +64,6 @@ struct fsl_elbc_mtd {
>>>>
>>>> struct device *dev;
>>>> int bank; /* Chip select bank number */
>>>> u8 __iomem *vbase; /* Chip select base virtual address */
>>>>
>>>> - int page_size; /* NAND page size (0=512, 1=2048) */
>>>>
>>>> unsigned int fmr; /* FCM Flash Mode Register value */
>>>>
>>>> };
>>>>
>>>> @@ -85,6 +84,8 @@ struct fsl_elbc_ctrl {
>>>>
>>>> unsigned int mdr; /* UPM/FCM Data Register value */
>>>> unsigned int use_mdr; /* Non zero if the MDR is to be set */
>>>> unsigned int oob; /* Non zero if operating on OOB data */
>>>>
>>>> + char *buffer; /* just used when pagesize is greater */
>>> Start sentence with capital letter
>>>
>>>> + /* than FCM RAM 2K limitation */
>>>>
>>>> };
>>>>
>>>> /* These map to the positions used by the FCM hardware ECC generator
>>>> */
>>>>
>>>> @@ -159,6 +160,44 @@ static struct nand_bbt_descr bbt_mirror_descr = {
>>>>
>>>> .pattern = mirror_pattern,
>>>>
>>>> };
>>>>
>>>> +static void io_to_buffer(struct mtd_info *mtd, int subpage, int oob)
>>>> +{
>>>> + struct nand_chip *chip = mtd->priv;
>>>> + struct fsl_elbc_mtd *priv = chip->priv;
>>>> + struct fsl_elbc_ctrl *ctrl = priv->ctrl;
>>>> + void *src, *dst;
>>>> + int len = (oob ? 64 : 2048);
>>> No parenthesis ...
>>>
>>>> +
>>>> + /* for emulating 4096+ bytes NAND using 2048-byte FCM RAM */
>>>> + if (oob)
>>>> + dst = ctrl->buffer + mtd->writesize + subpage * 64;
>>>> + else
>>>> + dst = ctrl->buffer + subpage * 2048;
>>> subpage * len ?
>> dst = ctrl->buffer + (oob ? mtd->writesize : 0) + subpage * len ?
>> Is this important ? I think it is ok.
> dst = ctrl->buffer + subpage * len;
>
> if (oob)
> dst += mtd->writesize;
>
> it's important, this code looks like mess. You introduce len and don't use it
> anywhere then ?
memcpy_fromio(dst, src, len);
-Liu Shuo
> M
>
next prev parent reply other threads:[~2011-12-09 8:58 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-08 10:49 [U-Boot] [PATCH 1/5] mtd/nand: Add function board_nand_init_tail() for some special NAND controllers Shengzhou Liu
2011-12-08 10:49 ` [U-Boot] [PATCH 2/5] mtd/nand: Fixup for support ONFI detect Shengzhou Liu
2011-12-08 10:49 ` [U-Boot] [PATCH 3/5] mtd/nand: remove CONFIG_SYS_NAND_ONFI_DETECTION to enable ONFI detection Shengzhou Liu
2011-12-08 10:49 ` [U-Boot] [PATCH 4/5] mtd/nand: Add ONFI support for FSL NAND controller Shengzhou Liu
2011-12-08 10:49 ` [U-Boot] [PATCH 5/5] mtd/nand: workaround for Freescale FCM to support 4k pagesize Nand chip Shengzhou Liu
2011-12-08 16:37 ` Marek Vasut
2011-12-09 2:33 ` LiuShuo
2011-12-09 8:27 ` Marek Vasut
2011-12-09 8:58 ` LiuShuo [this message]
2011-12-09 9:11 ` Marek Vasut
2011-12-09 9:32 ` LiuShuo
2011-12-09 9:46 ` Marek Vasut
2011-12-08 18:09 ` [U-Boot] [PATCH 4/5] mtd/nand: Add ONFI support for FSL NAND controller Scott Wood
2011-12-08 16:35 ` [U-Boot] [PATCH 1/5] mtd/nand: Add function board_nand_init_tail() for some special NAND controllers Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EE1CDB2.6010102@freescale.com \
--to=b35362@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox